Acer Aspire E1-571 :: Windows 8 Not Booting Unless Hit F12 And Select EFI Device Windows Boot Manager
Sep 30, 2014
I have an acer laptop e1-571 with windows 8. the mb failed ordered a new one installed it. on boot now i get no bootable device. The bios shows the hard drive and its the first in the boot order. If i hit f12 after powering on to access boot options the 3rd choice is efi device windows boot manager. If i select that it boots normally and runs fine. is their a way to boot the machine without having to hit f12 every time and selecting efi device to boot to windows? i tried updating the bios as well.
View 2 Replies
ADVERTISEMENT
Nov 20, 2014
My Acer Aspire L5100 , now can not start windows.
Blue screen , boot manager status Oxc000000f
needed unit is not available.
I do not have the win disc, what to do now?
View 3 Replies
View Related
Jan 31, 2015
Tried to do a restore to factory image... Got error code 0x241... Computer is hung up at Windows Boot Manager, going around in circles... Can't accomplish tasks on windows boot manager and can't get out of window...
Acer Aspire One
Windows 7 OS
Have recovery data on a flash drive
View 2 Replies
View Related
Feb 20, 2013
I just reveived my brand new Dell inspiron 14z. When I turn it on I get an error message.
"Check cable connection!"
"PXE - M0F : Exiting Intel PXE ROM."
Reboot and Select proper Boot device
or insert Boot Media in selected Boot device and press a key
This is a brand new laptop.
View 9 Replies
View Related
Mar 3, 2013
I have an Inspiron N5110, service tag 84J4GR1. Last month, just after the warranty expired, the hard drive failed a test and I ordered a replacement Seagate drive. I followed the instructions to replace the old one but when the computer is powered up, a message comes up "Reboot and Select proper Boot device or insert Boot Media in selected boot device and press a key" I have entered the Bios screen and changed the boot up order so that the hard drive is first. I have also run the Diagnostics facility which say that all device working including replacement hard drive. How to get the machine to boot up?
View 1 Replies
View Related
Feb 19, 2015
I have a new Acer Aspire E1-572 and after setting it up, created a Windows 8.1 Recovery USB. When testing it, I find that when booting from the Recovery USB,
I'm prompted to select my keyboard and then to boot from the EFI USB. It then restarts and prompt me to select my keyboard etc.
View 3 Replies
View Related
Apr 27, 2014
Have a yellow triangle error on device manager for the SM Bus Controller.
Hardware ID = PCIVEN_1022&DEV_780B&SUBSYS_21F7103C&REV_3A
View 1 Replies
View Related
Jan 10, 2015
Recently upgraded to windows 8.1 and since then no bluetooth being detected in device manager.
View 2 Replies
View Related
Apr 3, 2014
I am new user of hp laptop. I have an HP Spectre 13 3001el and windows 8.1; my bluetooth no longer exists! I do not see the command to enable the bluetooth settings and the network card on the bluetooth does not even appear in the device manager! I reinstalled hundreds of times the drivers for the card "intel duel band wireless AC 7260" but bluetooth still does not work! I tried to restore the initial configuration of windows but to no avail, bluetooth still does not exist!
View 9 Replies
View Related
Mar 4, 2015
when my computer boots up it says "automatic repair" then it says "diagnosing your pc" then it goes from the logo screen to a blue screen that says "automatic repair" it gives you options and plenty of them but none of them work for my notebook computer. im starting to think of just throwing it away because it cannot be repaired and i dont have a warranty on it anymore in order to send it in. even if i did have the warranty it would take months to get back to me. so.....anyways ive tried command prompt to somehow reset it to factory defaults but i do not know how to do that. when i click on refresh your pc it says "there was a problem with refreshing your pc." and then when i click on "reset your pc" says "there was a problem resetting your pc" ....
View 1 Replies
View Related
Feb 24, 2009
I just installed Windows 7 in my M6400, the standard configuration is:
- 410 Bluetooth + UWB
- Fingerprint
- Web Camera
I've installed already the drivers for:
- Intel Chipset
- Intel SATA
- FX3700 (from Dell for Vista x64)
View 6 Replies
View Related
Jan 14, 2014
I have a HP Pavilion dv6-1107X Entertainment Series notebook. When I turn it on I get an inconsisent series of very loud short beeps nearly always in 3 groups. First group can be 4 to 6 beeps. Second group can be 1 or 2. Third group just goes on and on until the Windows Boot Manager pops up. Once I select the Vista operating system everything appears to start working as normal.
Here is what I have done:
1. Replaced motherboard and CPU
2. Checked and tested hard drive by diagnostic and in another machine - okay
3. Have used a known good hard drive in this machine - same symptoms, no change.
4. Checked and tested RAM stick in both slots, by diagnostic test and on another machine - okay
5. Did a Factory Default recovery - Operating System (OS) behaved erratically.
6. Did a Clean Install using another machine - OS works but same symptoms as above with beeps and Windows Boot Manager.
7. Installed all required drivers as required in Device Manager (after a LOT of problems trying to find the HP driver download support - I had to search for HP Compaq Pavilion dv6-1107AX to find a site that linked to the driver downloads).
8. Have run AVG anti virus, and 3 x anti spyware (Malwarebytes, Spybot and SuperAntiSpyware). Nil bugs founds.
9. Reset BIOS to defaults.
Am also having problems from time to time access BIOS. It takes several attempts but can be gained by pressing F10 immediately after the first screen with ESC option on it. Also have problems access Safe Mode using F8 but perseverance is required and it will work eventually.
View 2 Replies
View Related
Oct 11, 2014
I have a Acer E1 522-3657 computer, which my son set-up for me but did not make the recovery disc(s). The unit is just outside of the warranty period when the hard drive failed. The hard drive just makes a clicking noise and after the logo screen appears it goes to a blue screen with a box that has the following message with in, "Default Boot Device Missing or Boot Failed. Insert recovery Media and Hit any key.....Then Select 'Boot Manager' to choose a new Boot Device or to Boot Recovery Media.
I have installed a brand-new Western Digital 1T Sata3 harddrive to replace the Toshia 750 GB original Drive. After turning the computer on and at the logo screen I press and hold F2, this takes me to the InsydeH20 Setup Utility Screen. I see under the "Information" menu that the installed harddrive model and serial number appear. I see in the "Boot" menu, Boot Mode: "UEFI" and Secure Boot: "Enabled".
Under the "Exit" menu, Exit Saving Changes is highlighted. When I press F10 a "setup Configuration" box appears asking to save configuration changes and exit now? "Yes" is highlighted to which I hit Enter and are returned to the "Default Boot Device.......page. I then hit ecs twice and are at a black screen with the message No bootable device -- Please Restart system_appearing in the upper left corner of the screen. I then push and hold the power button until the computer shuts off.
I have ordered from acer the "Acer E-recovery Media Disc Set", which is specific to the SNID of my computer. I have not attempted to format the new hard drive in any way. I assume the E-recovery Media Disc Set will handle that operation due to the multiple partitions required.
In view of the above situation, do I need to set up the computer in any way before I start to utilize the E-recovery Media Disc set. I assume the Media will be on CD's. The computer was running Win 8.0 which was updated to Win 8.1 and was running very well, very stable.
View 5 Replies
View Related
Feb 6, 2015
Acer V5, spilled coffee on keyboard. no problem at first, then lockup, and on restart get the No Boot Device or Boot Failed. Am using my old laptop now. Can I get a download, save it to thumb drive, and use it to restart/reboot my Acer?
View 2 Replies
View Related
Mar 8, 2009
a have a acer aspire 5630 and my dvd driver has a problem this is what it says Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39) Click 'Check for solutions' to send data about this device to Microsoft and to see if there is a solution available.
View 5 Replies
View Related
Feb 8, 2015
I have Accer aspire e1-571 i want to know abaut base system device, i have installed all drivers in my laptop but base system device driver pending i want to knw how to install it. os win 7 pro 64 bit
View 8 Replies
View Related
Jul 23, 2014
For the past couple of weeks I haven't been able to use my lenovo s230u twist. I can turn it on, I can get to the "lenovo, to interrupt norml startup press enter." But then the screen goes black. Then I get to the windows boot manager, where i get some options. [URL] ....
View 2 Replies
View Related
Dec 25, 2014
As noted above. Seems to be no power going to CD rom. light does not come on. door does not open, does not play cd.
View 6 Replies
View Related
Sep 24, 2009
I installed Windows 7 Home Premium 64-bit on my Acer Aspire AS1410. Maybe it's normal, but the hard drive LED is solid on for about 30 seconds before it boots into Windows 7 during the floating windows screen. Is this normal?
View 10 Replies
View Related
Nov 13, 2014
I have an ACER ASPIRE 5755 laptop with 4GB RAM and 500 GB Disk. Now the issue I am facing is, it doesn't boot up. It just sits at a screen for sometime and then even if we reboot it goes to the same screen which is much prior to loading Windows and I believe just after the POST. I checked in the BIOS that hard-drive was not getting detected. I unplugged replugged ..took it out, put it back in but nothing worked. Than I removed that hard-drive and replaced it with a working hard-drive of my fren's & eventually it booted up fine. Hence this isolates to be an issue with the hard drive. Now my question is that, "is there any upper limit on the size of the hard-drive (as the inboxed one was 500GB)". I am planning to take 1TB hard drive. So will that work In addition to this, is there any link provided by Acer which I can browse and check what all Hard-drives are supported / compatible / recommended by Acer. I have been a big fan of Acer Laptops from a long time and would not want to buy a new laptop just because of this simple hard drive issue.
View 1 Replies
View Related
Oct 29, 2014
I just buy an Acer Aspire V3-371, then I delete all partitions in HDD and install MS Windows and driver for this notebook. Everything are OK until I ugrade BIOS form v1.05 to v1.08. Now, it cannot boot to MS Windows and shows me "No Bootable Device".
I try to reinstall MS Windows, but I see a notice "Windows can't be installed on this drive" with details "Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GPT disks".
View 5 Replies
View Related
Jan 5, 2015
ASPIRE 5251-1513 with 2 - 1GB memory sticks in it. The problem is after updating with microsoft updates and changing the useable memory setting to 0 Windows 7 will not start up.. so I tried to restore from earlier restore points. Windows 7 home premium still won't start up. I tried using the windows automatic repair, it fails after a few minutes. I tried resetting the BIOS to system defaults. Windows still won't start up.... says windows start up, but after a minute a black screen flashes and laptop shuts off. I don't have any recovery disks.
View 4 Replies
View Related
Nov 21, 2014
So I bought Acer E5-527G-77BU. I installed windows 8.1 Pro with no problem. But I really don't like this windows and I want to install Windows 7. But when I plug in DVD or flash drive with windows, I don't get the boot option for it (in the f12 boot menu). If I put in the Win 8.1 DVD everything is fine. I can chose it from the menu.
View 3 Replies
View Related
Feb 26, 2010
I have problem with my Acer Aspire 7520G. When I turn it on, after memory check and disk check I got messages:
Resource Conflict PCI Serial Bus Controler in slot 01
Bus:01 Device:04 Function:00
ERROR
Bus:01 Device:04 Function:01
ERROR
Bus:01 Device:04 Function:02
ERROR
Bus:01 Device:04 Function:03
ERROR
Bus:01 Device:04 Function:04
ERROR
after this wont boot neither from HDD nor CD/DVD. Just blink currsor apears.
After a few of restarts, if I got luck, it will boot up "normally". I checked in Windows system that Bus 01 Device 04 is acctualy
Ricoh 1394 OHCI Compliant Host Controller at Function 00,
SDA Standard Compliant SD Host Controller at Function 01,
Ricoh SD/MMC Host controller at Function 02,
Ricoh Memory Stick Controller at Function 03,
Ricoh xD-Picture Card Controller at function 04.
View 9 Replies
View Related
Feb 17, 2009
i just installed windows 7 in my acer aspire, but i found that it doesnt work....
is there any new lauch manager setup for windows 7 ?
View 10 Replies
View Related
Oct 18, 2009
It's about time, those who have been waiting for Windows 7 to ship pre-installed, well the wait is over.
http://www.dell.com/content/topics/t...=us&l=en&s=gen
View 10 Replies
View Related
Oct 13, 2014
Acer E5-471..... When I attempt to start my laptop it goes to the Acer logo screen and will not boot Windows 8. Only black screen and mouse pointer appear. How can i fix it?
View 3 Replies
View Related
Oct 31, 2014
When I strart my laptop it will show the Acer screen with the F2 F12 options then goes black with cursor in upper left corner and when windows should load it goes back to acer screen and will keep doing this till I smack it on the side then it will load windows and run normally. I created a disk image, bought a ner hard drive, loaded my image onto the new hard drive and it worked fine for a couple hours of starting and shutting down. Then it started doing it again ...
View 2 Replies
View Related
Oct 31, 2014
When I strart my laptop it will show the Acer screen with the F2 F12 options then goes black with cursor in upper left corner and when windows should load it goes back to acer screen and will keep doing this till I smack it on the side then it will load windows and run normally. I created a disk image, bought a ner hard drive, loaded my image onto the new hard drive and it worked fine for a couple hours of starting and shutting down.
View 2 Replies
View Related
Oct 8, 2009
I am having trouble getting launch manager to work on my TM8200 with WIN7 Enterprise. I have the three buttons working with the programs that I prefer, but, even though it is a small problem, I would like to program the email button to check for mail and blink when I have mail, just like it did in the 'old' days.
I know that the Launch Manager program is on the computer, because I programmed the keys, but I can't open it anymore. Double clicking on all the .exe files in Launch Manager get me nowhere.
View 4 Replies
View Related
