Acer Aspire E1 :: Windows 7 - Not Start After Welcome Page Screen Stays Black
Feb 6, 2015
i have a 2 day old laptop Aspire E1 with windows 7 wont start after welcome page screen stays black until i push ctrl alt del and then the task manager will start and i kill two procsess that say RUN ONCE then windows GO HEAD and start up and run fine .what is wrong .
My acer aspire v5 - 122p went through an automatic update recently after it powered back on it never booted past the initial Acer boot screen I eventually did a hard resetbut now the screen stays completely black the fan is on the blue lights are on but nothing else. From what I have read online you can flash the bios but the file I have downloaded on the Acer website does not match any of the tutorials I have read or watched.
i have a acer aspire 3000 i got from some relatives but when i turn it on it turns on i can here the fan kick on an the dvd drive go click click and stuff but then fan stops and it goes dead silent and the screen never shows anything from the beggining by any chance do those little switches that shut off the screen when u close it ... .do they ever brake ...? ive tried hooking it up to another monitor but it doesnt show a screen of anything but it must send some type of a signal cause its just a plain blank screen and once i unplug it it sais no signal no signal all over
recently installed an automatic update to windows 8.1. Now I get a black screen after the welcome page. I can load task manager and get to the internet. tried to get to safe mode at startup with f8 but several attempts were unsuccessful. I updated my graphics driver from AMD today and same black screen appears. I also restored sytem to an earlier date using the HP utility with same results - black screen after welcome page.
I have a Studio 1558 laptop running Windows 7. Recently, when I open an application (ex. Microsoft Word, McAfee, Excel), the screen fades to black, stays black for 2-3 seconds, then pops back up. It has happened at a few other times too, but I don't recall the specific circumstances. The laptop is 2 1/2 years old, unfortunately out of warranty ....
Dell Inspiron M5030 is fallen down,Front part of DVD dropped.attached it,turned on the laptop. no boot,2 short beeps,error
When I turn it on,I get this error in a black page:
Check Cable Connection!
PXE-MOF:Exiting Intel PXE ROM.
Reboot and Select proper Boot device or insert Boot Media in selected Boot device and press any key
I turned it off and press f12 and changed the reboot default to Hard Drive, again 2 beeps and same black page with same errors.
Dell Inspiron M5030 is fallen down,Front part of DVD dropped.attached it,turn on the laptop. no boot,2 short beeps,error
Edit | Delete
When I turn it on,I get this error in a black page: Check Cable Connection!PXE-MOF:Exiting Intel PXE ROM.Rebot and Select proper Boot device or insert Boot Media in selected Boot device and press any keyI turned it off and press f12 and changed the reboot default to hard Drive and other option, again 2 beeps and same black page with same eroors.
I have hp g62 after windows start i got a black screen then i restart the pc going in safe mode then disable graphic card then restart pc it's working but the graphic card still disable...
Recently, my Blackbook has had some troubles when I close the lid. What happens is the light never starts pulsing, and the laptop gets really warm and the fan goes crazy. When I open the lid, the screen stays black. When I reboot it, It shows the grey screen, goes black for a sec, then restarts. I tried reseting the pram, but it didnt help.
My screen gets black when I start windows 7 on my Hp Paviliom Dm1 Notebook. Also I connected my pc to an external monitor through VGA cable and then I can see the windows operating system in the external monitor . I did a start-up test and then I got these results:
After logging in I get stuck in a black screen with cursor. Have tried shift or control with f8 and f12 to get out of this with no success. Understand I may have to reinstall video driver or BIOS?
If I leave laptop on all day it is working by the time I get home from work.
My laptop is booting properly. I can hear the windows start up sound. I can event browse the shared files from remote computer. But the monitor stays black.
Acer E5-471..... When I attempt to start my laptop it goes to the Acer logo screen and will not boot Windows 8. Only black screen and mouse pointer appear. How can i fix it?
I'm working with a HP G72-250US Notebook and using Windows 7 64 bit Intel core(TM). M350@2.27ghz2266 mhz 2 cores
Is it the Mother board or the Harddrive? Replaced screen due to vertical and horizontal lines in color. Computer worked normal at times. I thought it was fixed but then while doing a HP diagnostic program the computer said to shut down because the batttery situation might harm the computer . I tested the AC adapter. I installed a new battery and at first it was working again. I updated and scanned with AVG & Malwarebytes. Did another HP diagnostic and at one point was told to restart. It never lived again to this point.
All it does is light up the power light and W/LAN (F 12). Blue lights are on at times indicating Cap locks and number locks are engaged. I did do a complete factory restore before it came to this point and updated the bios (to F 37) and downloaded updates for chipsets and Graphics also.(after screen installed) The only thing it does now is make noises at startup and power indicator is lit now Light keeps cycling.(light off, light on) in ten second intervals.
I have laptop listed above. For the past 3 days I hasn't not been able to get it in. it sounds like its starting but the screen stays black. Recently installed antivirus on 01/01/2012 because I had some kind of worm/malware. Windows 7 is the OS. Cap lock light is on and "hp combo assistant" light is on constant no blinking. Don't know what to do.
I tried to update my bios to A07 -> A11 (the lastest). But the update failed. Ok. I just close the updater. I open Google Chrome, surf on the Internet etc. After 10 min, I shut off my Dell computer normaly. Now when I turn my MiniPC on, it just doesn't do anything... My hard drive doesn't starts. The screen stays black...
how can i fix acer aspire V5-572? it turns to blackscreen/blank screen after i've downloaded an application? i turn it off but when i tun it goes still the same..
I tried to install a new system software update on my Dell XPS 17, but I had to interrupt it in the middle of the installation. When I tried to resume it by starting my laptop then screen went black and it beeps like it was installing, but the screen is still black so I have no clue if it's doing it or not.
I have a HP Pavilion dv6 that won't start up-- black screen and I've tried a hard reset and that didn't work. It does beep If I take the memory out. But the fan, the wireles, mute, and caps lock lights are the only thing that work.
My problem is that when i start up my Laptop (its about a week old) i just get a black screen and nothing else. The only way of solving this problem is to take out the power lead and the battery and start it up again. I dont want to have to do this everytime i start up my laptop.
This first happened after my laptop crashed (Frozen screen bussing through speakers) there was a lot running at the time, virus updates, windows updates etc.
just got my replacment 1810tz. last book had some trouble with the keyboard. now the brand new just wont boot up. has some fan blowing and once harddisc access and then nothing. i already tried Fn + F5/F6 keys, no result. also attached via hdmi to monitor - but not any flickering. even let it lay there for some hours wiithout batterypack attached. no result.
how to remove the bios battery, maybe this could solve it...?
I've been experiencing a few issues recently with my Acer Aspire V5 so I did a return to factory settings (Full wipe).
I've come home today and the screen keeps on going black even though the computer isn't asleep. I move the mouse, and I see the desktop again, but then after less than a second, it goes black again.
My aspire s3 screen suddenly goes black. When I connect it to HDMI I can see the display on the HDMI device. When I disconnect HDMI the screen display comes back but again goes black after some time. It is a hardware problem or some settings to be done. This display problem happens when I restart or power on the note book.
My acer aspire v5 is on black screen. This happened when i forced it to shutdown while a disk check up is on progress, coz it stuck up for about an hour it didn't even move an inch. my function keys are not working.
I've been experiencing a few issues recently with my Acer Aspire V5 so I did a return to factory settings (Full wipe).
I've come home today and the screen keeps on going black even though the computer isn't asleep. I move the mouse, and I see the desktop again, but then after less than a second, it goes black again.
There is no screen saver applied. This is probably user error, but how do I resolve without having to take it to the repair shop.
I watched a movie on Thursday evening and closed the lid of my acer aspire E531 laptop. (Chosen shut down method) I wanted to resume working about 2 hours later and was greeted by only a grey screen. Machine powers up but then just the blank screen. After switching on, the fan starts for about 30 seconds and then stops and then the blank (grey like screen)
I've tried some solutions posted on internet ( remove battery and hold power button; press ctr alt del twice; press F8 on start up) Nothing worked. The remove battery solution ignited some response from the machine, i.e. grey screen seemed to turn white with feint blocks in background almost checkered blocks, but very very feint.
I'm having problems with my laptop (HP Pavilion dv4 1428dx) the last thing I did was put it to sleep, then cameback and tried to wake it up but it would not start up. All the lights are on, but the screen is black and the only thing I hear is the fan moving. The caps lock and num lock keys have a blinking light, not really sure what that means. The power LED is on, the battery LED is on, but the hard drive LED is not on.