I've Acer Aspire V5-431 with Intel Celeron 1007U @1.5Ghz with 4GB of RAM, but whenever I tried to install Windows 8, it's always came with Blue Screen of Dead and it's shows this error IRQL_NOT_LESS_OR_EQUAL.
View 3 RepliesWhile installing the Wireless Lan Broadcom 802.11 driver I get the error: Update.cpp 1185. The machine is an E1-532P and this is the only driver which has a problem. Broadcom.com does not provide support for end users.
View 5 Replies View RelatedI upgrade my laptop to windows 8.1. But a few drivers were missing after installing those some unknown devices are showing in device manager. Apart from that sound driver works just fine but beats control panel won't open with error shown.
The drivers missing are
PCIVEN_10EC&DEV_5227&SUBSYS_1963103C&REV_014&da47f66&0&00E3
PCIVEN_8086&DEV_8C3A&SUBSYS_1963103C&REV_043&11583659&0&B0
ACPIHPQ60073&11583659&0
I have tried everything but couldn't find these.
Product Model is: Envy 15-j021tx
I have a "Hive" error message that displays on a blue screen. Windows does not load. Any wa getting this machine going ....
View 2 Replies View RelatedOk, i found the solution for my Acer P3-171. I uninstalled Аcer cradle driver (by starting the installer downloaded from official site). Then i installed video driver for Windows 8.1 and everything now works fine.
View 4 Replies View RelatedIs it possible to install Windows XP on Aspire E1-532? E1-532 in the BIOS have only ACHI mode!
View 2 Replies View RelatedI'm An Acer Aspire 6930G user and it has vista home premium installed as OS. Today When I was trying to install Windows Xp on it A blue Error Screen Appear in the beginning of windows installing...I tried with 3 different Xp cd's but still the same problem.
Here's the full form of what that blue screen says:
The problem has detected and windows has been shut down to prevent damage on your computer. If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow this steps:
Check for viruses in your computer. Remove any newly installed hard drives or hard drive controllers.Check your hard drives to make sure it is properly configured and terminated.
run CHKDSK /F to check for hard drive corruption, and then restart your computer.
Technical Information:
*** STOP : 0x0000007B (0XF78D2524,0XC0000034,0X00000000,0X00000000)
I am about to re-install Windows on my friend's laptop, an Aspire 4520.
I am not super familiar with laptops, however I have noted that at the top
of his desktop, there is an utility program, a toolbar that I think is called Empowering Technology. My friend uses it mainly to check his battery charge
level, although there are a few other tools in this bar, like "acer eData Security Management".
The problem is, if I reinstall Windows, all programs on the Windows partition will be erased. That included this program/toolbar. And I don't know where to get back it back...like where to download a new one for installation.
my gf has aspire 5100 with vista in it, and it sucks so I decided to install xp to it. I reseached from google that does it support xp and does it work and found out that it does, you just need to make custom xp-install disc to get the HDD drivers so that xp-installation finds the HDD.
When I install xp, I get past the filecopying-part fine, then it reboots as usual and tries to start windows, but in the loading screen with xp-logo it gives me bluescreen.
0x0000007B is the error.
I've tried many installing over and over again, but with no luck. Its possible that my xp-cd is damaged in some way, but I just dont think so.
Any solution? Seems like everyone else has had no problems with installing xp to aspire 5100 vista.
I believe that istalling vista back works, but its not the right solution, since its piece of **** and slow as ****.
I bought a Aspire E5-551 on amazon second hand. Had a fresh Windows 8.1 on it. Turn it on, mess around, everything seems fine if not slow due to the HDD. Pop in a new SSD I bought that tested OK on with another computer. Install Windows 8.1 Via USB. It get to the part will it tell me to restart, upon restart it will always hang at getting ready or some such thing. I let it set for hours, even the spinning icon stropped spinning.
So I reset the laptop via the power button. I get the error "The Computer Restarted unexpectedly or encountered an unexpected error" and tell me to restart. It will keep doing this no matter how many times I click restart. Never had this issues with all the other computers or laptops I ever installed 8.1 one but the internet has a solution. While the "The Computer Restarted unexpectedly or encountered an unexpected error" is on screen you can bring up cmd line via shift+f10 and bring up regedit. The fix is to go to HKLocal machine/SYSTEM/SETUP/STATUS/ChildCompletion and change the setup.exe key to 3. After this I'll get some issues with blank screens upon restart but after 1 or 2 reboots i get to my desktop. Though the desktop doesn't have all the apps and things a fresh windows install comes with.
Like IE is not even listed on the start menu. Looks like a halve baked install or something. But everything is fine. While like this I can reboot the machine a bunch. Click around, seems okay. Seems like all is well till I start installing drivers. Ill go installing drivers then the machine will stop responding to clicks but the mouse still moves around. When I reboot it like this Ill get struck at "getting ready" and i'll never be able to get to my desktop again. Now I can get into safe mode and Ill uninstall all the drivers but when I try to do a regular boot ill just hang at "getting ready'.
Tried to do a restore to factory image... Got error code 0x241... Computer is hung up at Windows Boot Manager, going around in circles... Can't accomplish tasks on windows boot manager and can't get out of window...
Acer Aspire One
Windows 7 OS
Have recovery data on a flash drive
Well, when my notebook finally start, on desktop it show an error message:
"Windows has recovered from an unexpected shutdown"
Problem name: BlueScreen
Version SO: 6.1.7601.2.1.0.256.1
Id. regional setting: 13322
Note: I updated my laptop with 4 RAM and Wx 7 32-bits. The hard disk also is new .....
i just bought an acer aspire 5102wlmi without a HD for a friend. so i went and bought a HD and proceeded to install windows XP home service pack 2.
the problem is it constantly stays in a loop, i load and boot from the disc, it copies all the files, reboots, loads the files, says starting windows, and then just starts all over by going back to the setup screen. i've formatted the drive and made multiple attempts. had anyone else had this problem? if so what is the solution?
i have the acer aspire e1-510 with linux, how do i remove linux and install windows ?
View 1 Replies View RelatedI have a problem with my Acer Aspire one D250. One week ago my HDD didnt work and I bought another HDD. I dont have CD for reinstall windows XP that it was installed. Now I wanted to install windows 7 starter but impossible. He says he can not because the BIOS might not be compatible with the operating system and then tells me that if I want to load drivers. I'm a little desperate. I changed in the BIOS mode IDE hard drive to AHCI and vice versa. If I put IDE and try to install windows 7 does not recognize the disk (I have to put in AHCI).
The message I get is:You can not install windows on this HDD. It is possible that the hardware of this equipment is not capable of booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menu. Another warning he gives is:The installation program can not create a new system partition or locate an existing one. See the log files installation program for more information.
I updated the BIOS version to the last (1.29).
i have the acer aspire e1-510 with linux, how do i remove linux and install windows ?
View 1 Replies View RelatedI bought Acer E5-527G-77BU. I installed windows 8.1 Pro with no problem. But I really don't like this windows and I want to install Windows 7. But when I plug in DVD or flash drive with windows, I don't get the boot option for it (in the f12 boot menu). If I put in the Win 8.1 DVD everything is fine. I can chose it from the menu.
View 3 Replies View RelatedFor the last 2 days I have been trying to install Windows 7 x64 in UEFI mode on my laptop but it seems entirely impossible. Whatever I do, the boot menu (F12) just won't show any UEFI devices AT ALL, just the normal DVD and/or USB options. Obviously when I try to boot from either normal DVD or USB, Windows 7 setup freezes at the "Starting Windows" screen, I'm pretty sure that's because it is not running the EFI bootloader of the setup.
For the record, I can't just install Windows 7 in Legacy/BIOS mode because it is then impossible to install the Synaptics Touchpad driver under Windows because the Touchpad device is not discovered for whatever reason.
I've Acer Aspire V5-431 with Intel Celeron 1007U @1.5Ghz with 4GB of RAM, but whenever I tried to install Windows 8, it's always came with Blue Screen of Dead and it's shows this error IRQL_NOT_LESS_OR_EQUAL.
View 3 Replies View RelatedI have Accer aspire e1-571 i want to know abaut base system device, i have installed all drivers in my laptop but base system device driver pending i want to knw how to install it. os win 7 pro 64 bit
View 8 Replies View RelatedSo I bought Acer E5-527G-77BU. I installed windows 8.1 Pro with no problem. But I really don't like this windows and I want to install Windows 7. But when I plug in DVD or flash drive with windows, I don't get the boot option for it (in the f12 boot menu). If I put in the Win 8.1 DVD everything is fine. I can chose it from the menu.
View 3 Replies View RelatedI have Dell inspiron N4050, I was attempting to install a fresh copy of Windows 7 Ultimate and after installation, it restarted I get an error blue screen that reads: A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: The BIOS in this system is not fully ACPI compliant. Please contact your system vendor for an updated BIOS.
Technical information:
*** STOP: 0x000000A5 (0x0000001D,0x00000000,0x00000000)
The High Definition Audio Device ha an error10 , there ios no Driver installed for this device , is there a work around available to get my sound working??
View 3 Replies View RelatedI did a complete restore of windows 7 starter on acer aspire one d270-1410. install hangs up on office 2010, currently for over 8 hours, without going any further. it's a vicious circle. can't get past office 2010 install. i have no cd drive.
View 1 Replies View RelatedI have a D510 battery that according to the laptop LED is fully charged however upon booting into windows the battery power indicator and the dell quickset indicator show only 84%i have also let the laptop charge the battery while in windows however even when the charge indicator on the laptop is off and the indicator in the taskbar shows running of the mains the charge is again 84%i have tested the battery health using the inbuilt indicator and it is OK, it is only 12 months old but i am aware that degridation takes place, but could this just be a case of windows not reporting the charge correctly and its nothing to worry aboutthe battery lasts between 2-3 hours on average id say thats goodupdated the battery seems to be stuck charging at 88% is that a sign of simple wear and tear?
View 2 Replies View Relatedtoday I bought a Acer Travelmate B115 (M41 RQ).
I has a rudimentary Linux installed, which I want to delete and then install a Windows7 Prof SP1 64bit from DVD.
After changing the order of the boot devices and putting the USB-DVD drive first the Travelmate tries to boot from the DVD but then tells me 'Security Boot Error'. I tried it more than 10 times, same error each time. The external USB-DVD drive is working fine on another computer.
I also prepared a bootable USB stick, but this one doesn't even get noticed by the Travelmate.
My acer travelmate P645m internet connection is quite bad. It happens quite frequent as well.
When I connect my laptop to wi-fi (my own router and in the library), it always has a yellow triangle exclamation mark all of a sudden. As my phone connects to those wi-fi too, I have checked the internet is still working fine when it happens on my laptop, so I am sure it is my laptop that doesn't connect to the wi-fi stably. I will have to turn off the wi-fi and turn it on again to make sure it has access to the internet.
I know it is not a complicated process of turning off and on the wi-fi on my laptop but because I just bought the laptop two months ago, if there is any hardware problem, I would like to fix it within my warranty. Why the internet connection on my laptop is so poor?
I used 2 X 2GB memory but on my BIOS it recon only 3.3 GB, but few days ago my laptop going nuts, my geforce 7300 go is falling.
after contacted my local acer service, and they examine my laptop, they found my mem card had no problem on it, and the upgrade my BIOS to clean up the mess but, my mem reduce from 3.3 to only 3 gb. it all at the bios mem check, not on OS. they said this laptop didn't support 4 GB memory, that's wierd, on this notebook spec it said up to 4 GB. not 3 GB.
so where the going wrong? since I already run this laptop with 4 GB ram and recon it as 3.3 gb and had no problem with it, for a long times, but after had problem with the geforce faling down it can't recon 3.3 gb after they fix it with upgrade the bios. I think the problem goes to the motherboard, if I goes to old bios the geforce is falling down, if I stay on this bios it's only recon 3 gb ram mem. they can't explain why this happen.
and the bottom line, you guys with acer laptop and using 4 GB ram memory should check at the bios, how much it recon, it as 4 GB or 3.3 GB.
since IMHO the OS never will be using 4 GB if the bios didn't recon it.
but there is some glicth if you look at the system information it recon 4 GB but, on bios it recon as 3 GB and the task manager recon it as 3 GB
During restore using Acer recovery disks for this Acer aspire 551, the recovery stalls at the final step where the wim file is written to the c: drive. It gives me an i/o error.
I suspect that the disk is functional because I have run the cmd.exe program from the x:drive and then run both scndsk.exe and scndsk.exe /F to fix any errors. No errors were detected.
However, any fix for this error that I have encountered suggests replacing the hardrive. This seems to be inappropriate, in this case.
I should also say that I have used dos commands to copy a file from the system32 directory to the c: drive successfully suggesting that there is no problem with writing to the disk.
Lastly, the cd rom hardware must be working or the disks would not be successfully read to the final stage. How this can be an i/o error eludes me.
I've been getting the BSOD error on my PC. The main ewrror is 0x000000f4 but I sometimes get the 77 error as well. Most times i need to reboot and then I get the 200 fixed hard disk 0 failed error . If I click F! i get yet another error, PXE.61 error and this takes my rebooting quite a few times in order to get windows xp (media center edition) to come uo it stays on for a while (the length of time is getting shorter and shoryer these days) and then I have to go through the entire scenario over again. I'm trying to remove the files and programs that I actually care about off this comp. I contacted Acer tech support and was told that it most likely a HArd drive problem and that it would need to be replaced They had the wrong warranty ending date for me and after providing proof of purchase, they changed it to 11/23/07. Now that I have about 8 days left on my warranty. the tech support person told me to purchase the extended warranty because if I ship it to them and the warranty expires, I will have to pay for the service. Now my question is this. I'm not too sure that it would be worth shipping it to them for repairs I will have to pay $99 for the warranty plus tax and At least $100 to ship it back to them. On top of that I have read horror stories about people who sent their comps in to be repaired and it being returned to them with scratches on the LCD, initial problems not repaird or additional problems after the comp was returned to them. I'd much rather carry it in to a shop but was told their are no local repair shops in my city except for geek squad and they will charge me since I didn't purchase my comp from them. WHat would you do take it to a local repair shop or pay the bugcks to extend the warranty and then pay to have it shipped to be repaired? Another reason why I am leery is because I bought a HP laptop last year. the Ac adapter jack ont he comp was loose so I shipped it to HP to have it repaired. they had my comp for almost a month and then told me the motherboard, keyboard, speakers, and LCD display was unsalvageable and that it would cost me over $1000 to have it replaced(i only paid $369 for it on black Friday). They also told me that I had a liquid spill which was a total lie as I keep my laptop in my bedroom and I never eat or drink in my bedroom.( come to find out that loose jacks are a known problem with some Hp laptops I have read horror storeies about Acer using the dreaded liquid spill excuse too and I don't want to go through the drama again. Are the BSOD errors definitely the fault of a faulty hard drive?
View 7 Replies View Related