Acer :: How To Install Windows7 64Bit On Travelmate B115 (Error Security Boot Fail)
Nov 15, 2014
today I bought a Acer Travelmate B115 (M41 RQ).
I has a rudimentary Linux installed, which I want to delete and then install a Windows7 Prof SP1 64bit from DVD.
After changing the order of the boot devices and putting the USB-DVD drive first the Travelmate tries to boot from the DVD but then tells me 'Security Boot Error'. I tried it more than 10 times, same error each time. The external USB-DVD drive is working fine on another computer.
Â
I also prepared a bootable USB stick, but this one doesn't even get noticed by the Travelmate.
View 1 Replies
ADVERTISEMENT
Nov 15, 2014
today I bought a Acer Travelmate B115 (M41 RQ).
I has a rudimentary Linux installed, which I want to delete and then install a Windows7 Prof SP1 64bit from DVD.
After changing the order of the boot devices and putting the USB-DVD drive first the Travelmate tries to boot from the DVD but then tells me 'Security Boot Error'. I tried it more than 10 times, same error each time. The external USB-DVD drive is working fine on another computer.
Â
I also prepared a bootable USB stick, but this one doesn't even get noticed by the Travelmate.
how to get Windows 7 on a Travelmate?
View 1 Replies
View Related
Oct 14, 2014
I try to install OS from USB but my bios not showing USB boot  in acer travelmate 4050.
View 2 Replies
View Related
Feb 14, 2013
I have an Inspiron 5520 with Win 8 and for the last few days every time the system boots up I get the following message: "checking media (fail)". The message appears twice then the system boots normally. All the programs/apps work fine. The only "media" program I used was Windows Movie Maker and it works just fine.
View 5 Replies
View Related
Sep 25, 2014
Ideapad Z585 AMD A8-4500 1.9Ghz
AMD Radeon HD7640
My 11 month old Ideapad failed to boot last night with error 'BL Initialize Library Error 0xc0000029'. Eventually a blue screen appeared saying that multiple start attempts had failed and the system needed repair.
Â
As suggested I tried to use One key recovery but choosing restore to factory settings leads to self same failure.Sadly I have misplaced the recovery disc I created during a house revamp so cannot try that route.
View 7 Replies
View Related
Dec 4, 2014
I tried to reformat my Acer Aspire 5560. It goes through the System Disk, Recovery Disk 1, 2, 3, and 4 then on the Language Disk towards the end it receives a "Fail to Customize WinRe for recovery utility error".
Â
I have seen this error when people tried to create a recovery partition for the future but in this case I need it to get my computer back to working again!
Â
In the meantime it won't reboot and says BOOTMGR is missing Press Ctrl+Alt+Del to restart and just goes in a loop.
View 6 Replies
View Related
Oct 25, 2014
I just formated my acer travelmate p253 and when I set the boot order to boot from disk and restarted I got the error sayingPXE-E61: Media test failure, check cablePXE-M0F: Exiting Brodcom PXE ROM No Bootable device -- insert boot disk and press any key. And I have tryed every thing ro get my laptop to work I removed the hdd and put it back set the bios to default inserted the win 7 disk and set the boot order, inserted a usb with win 8.1 in and set the boot order.Nothing
View 2 Replies
View Related
Nov 8, 2009
I want to re-partition my HardDisk & install Windows 7 64-bit, on my Dell XPS 1530 (about 10 months old) which came with Vista 32-bit.
Please help me with a step-by-step guide. I haven’t experimented with any laptop yet & don’t want to screw my laptop .
Section - 1
My Laptop has only 2 visible partitions, but disk manager shows 4 partitions total as follows (in order):-
1.(Unnamed/invisible partition)86Mb - EISA Configuration
2.Recovery (D: ) NTFS file system 9.9 GB, primary partition
3.OS (C: ) NTFS file system163 GB system, boot, Pagefile, Active, Crash Dump ....
View 5 Replies
View Related
Mar 6, 2015
I have an acer TravelMate P255-MG with Intel core i5 and AMD Radeon graphics HD 8750M. I recently updated my laptop os from windows 8 to 8.1. Now everytime i put it on sleep mode(and the light goes on and off showing that it's in the sleep mode), once i turn it on again, it restarts and all my unsaved work is gone. Sometimes I shut it down and the next day i turn it on and it gives a "Video FATAL error". I'm downloading the drivers needed from the website( VGA Intel and VGA AMD). Will these drivers solve the problem?
View 2 Replies
View Related
Sep 4, 2009
Which drivers do I need to download for everything to work perfectly?
View 6 Replies
View Related
Apr 4, 2008
I have an acer Travelmate 4070 that will not boot. It is out of warranty so I am trying to trouble shoot. When I turn on the power the cpu fan starts and the harddrive seems to start, then the fan stops and no more sounds from the hard drive. The harddrive light stays on. Does anyone know where to start. I am guessing it is the motherboard, but could just be the hard drive.
View 4 Replies
View Related
Aug 30, 2008
i have a 6003lci unit and it does not boot fans (cpu) comes on but nothing, if you hold the power button it will go off, then press it again the front light comes on fan spins but still nothing more.
Is it anything to do with the smart card stopping it if so how do i fix?
I do have an other fully woring and swapped parts around but still same problem.
Do the units have a bios battery if so where is it (the only thing i think it is)
View 5 Replies
View Related
Apr 18, 2009
So i got hold of an older laptop the other day, the guy told me it had some defects because he couldn't get it to boot.
I got a power adaper/two RAM memorys with it, No harddrives though.
So i power it up and most of the time i just get a black screen and nothing is happening.
But sometimes i get the ACER startscreen saying (press F2 to setup)
[url]
[url]
But when i press F2 it then says (Please wait...)
[url]
And nothing happens.. ive tried several CDs in the CD-drive like Win XP install CD, Hirens Boot CD & Kororaa Live CD - but nothing works its just stuck at "please wait..." and ive waited like 5min.
Thing is also that when i power up the laptop the FAN turns on for some seconds but then it stops same with the CD drive, it reads but then stops.
Ive tried swapping the RAMs i got with the laptop but no luck.
Could this just be that i have no HardDrive in the laptop or is there something else thats faulty like CMOS battery or motherboard?
View 12 Replies
View Related
Jan 15, 2015
Can you try to update the SSD firmware, if the latest isn't already installed. [URL] ....
View 9 Replies
View Related
Oct 14, 2014
I try to install OS from USB but my bios not showing USB boot  in acer travelmate 4050.
View 2 Replies
View Related
Nov 20, 2014
I cannot get into my HP 2000-2d19WM, and the system disabled code is 52219959. Â This code shows up after I fail to put in an administator password....
View 1 Replies
View Related
Nov 17, 2007
I killed my BIOS my mistakenly running a BIOS update in WinXP... Power light, power to drives but nothing else.
After much searching I found I might be able to reflash it using a Crisis Recovery Disk, an external USB floppy drive and some combination of key-presses on boot.
Various combinations of this have been tried (FN+ESC, Win+B, Win+Fn, Fn+B....battery in/out, yada, yada, yada) and so the fallback is to use the boot block jumper as per Acer's support information:
[url]
After downloading FRU guides, user guides and service manuals for loads of Acer models, I haven't got one for the 2000 series that helps, though I have managed to get the keyboard off (I understand this is the usual location for boot block jumpers) revealing switch SW5 with 4 DIP switches.
Now what? :-)
I have emailed Acer support but hear less than glowing reports about their responses,
(I believe the motherboard is an Intel MS2154 which is used in TM20**, TM21**, TM25** and TM26** models, and maybe an Aspire one or two)
View 11 Replies
View Related
Mar 5, 2015
I have, a.o., a TravelMate2420. Can I let it boot up and/or close down on specific times? It's one of my Acers, the oldest, and I want to use it for monitoring my sunpanels.
That program will start up after boot and close down while closing down the system. The program uses COMports and for datasavings harddiskspace AND a part of the machines memory, so it has to shut down regularly before the machines' memo is full. And then start up clean and so on. Aprox a week of data will do, so a weekly restart of the system would be needed.
If timer doesn't work I can use the local network option. But how?
View 1 Replies
View Related
Oct 2, 2014
I am new commer here and this is my first post. I have recently purchased this nice laptop: Acer TravelMate P255, Intel Core i3-4010U (1.70GHz, 3MB), 15.6" FullHD (1920x1080) LED-backlit Anti-Glare, HD Cam, 4096MB 1600MHz DDR3L, 1TB HDD, DVD+/-RW, AMD Radeon R7 265 2GB, 802.11n, BT 4.0, Linux : NX.V9GEX.004
Â
I would like to change it's preinstalled Linux with a Windows 7 version. But I don't know which exact versions of Windows 7 this particular model is compatible with, because I failed to install the AMD graphics adapter driver from the support DVD disk on a Windows 7 64bit. Do I miss something ? Need I, for example, make any changes in the BIOS ?
Â
I have found same drivers to download, but none of them was successfull for my laptop.
View 6 Replies
View Related
Dec 4, 2014
I replaced a dead HD with an Intel SSD on my TM 8473T.  I have the latest BIOS version of 1.23.Â
Â
I wanted to install a fresh version of windows (via USB) but when I get to the section on creating partitions, I get a "windows cannot be installed to this disk. This computers hardware may not support booting to this disk. Ensure the controllers is enabled in the BIOs menu".
Â
The BIOs shows the SDD and the initial setup of widows shows that partitions are created but the install does not continues copying files over.Â
View 3 Replies
View Related
Sep 24, 2014
I bought an HP Laptop 4 days ago, hp pavilion 15-p018sv, but it came with windows 8.
Â
The problem I'm having is that almost all drivers fail to install with an error message such as:
Â
"the computer does not meet the minimum requirements for installing the software"
Â
The weird thing is that I'm downloading drivers through the official HP-Pavilion 15-p018sv Drivers Page for Windows x64, but they still won't install.
View 9 Replies
View Related
Jan 19, 2015
Laptop still under warranty. I recently had a motherboard and HDD replacement. I wanted to install Windows myself, but the BIOS was set to UEFI, and I couldn't seem to boot off of a USB drive. So I switched it to Legacy, booted from the pendrive, and installed Windows just fine.
Â
For whatever reason, I went back to try and change the setting to UEFI. Now the laptop switches on, but refuses to boot. I get a black screen, with no logo or any prompt whatsoever to access the BIOS.Â
I read a bit and seems I need to remove the BIOS battery, let the memory clear itself to reset BIOS settings to default, and try again? If it matters, I re-installed Windows 7 64-bit.
View 4 Replies
View Related
Jan 19, 2015
Laptop still under warranty.
Â
I recently had a motherboard and HDD replacement. I wanted to install Windows myself, but the BIOS was set to UEFI, and I couldn't seem to boot off of a USB drive. So I switched it to Legacy, booted from the pendrive, and installed Windows just fine.
I went back to try and change the setting to UEFI. Now the laptop switches on, but refuses to boot. I get a black screen, with no logo or any prompt whatsoever to access the BIOS.Â
Â
I read a bit and seems I need to remove the BIOS battery, let the memory clear itself to reset BIOS settings to default, and try again? I re-installed Windows 7 64-bit.
View 4 Replies
View Related
Feb 2, 2009
I have an FW11M which I formatted when I bought it, put on vista ultimate and after a weekend of fiddling, got all of the devices detected with correct drivers installed.
Anyway, now I would like to update the graphics drivers to the new ATI 9.1 catalysts except that every time I try, I run the setup, it appears as though it is working and then says installation complete...
however, it changes nothing. Device manager still reports the old driver version and the catalyst control centre does not run
View 4 Replies
View Related
Nov 6, 2014
I've Acer Aspire V5-431 with Intel Celeron 1007U @1.5Ghz with 4GB of RAM, but whenever I tried to install Windows 8, it's always came with Blue Screen of Dead and it's shows this error IRQL_NOT_LESS_OR_EQUAL.
View 3 Replies
View Related
Oct 11, 2014
While installing the Wireless Lan Broadcom 802.11 driver I get the error: Update.cpp 1185. The machine is an E1-532P and this is the only driver which has a problem. Broadcom.com does not provide support for end users.
View 5 Replies
View Related
Dec 11, 2014
I have a severe problem (I guess) after the latest BIOS Update. Windows 7 freezes during startup.
I own a 64-bit Lenovo FLex 2 15D with AMD A6-6310 and R4, 4GB RAM and a SSHD (8GBSSH). I purchased it without OS and installed Windows 7 - which worked fine so far.
I yesterday updated the BIOS with version 9FCN23WW (for Win7 and Win8), the latest BIOS update. A mistake, it seems.
After Reboot, I first had to disable Secure Boot in the BIOS, because it would not let me boot at all. I figured out how to get into the BIOS-Setup to disable this (press Enter 2x, press Tab when in the Boot Menu to access the "Apps Menu", then "SETUP").
Now Win7 begins to start up, but freezes during the startup process (the splash screen with the win flag freezes and looks a bit strange. I used the "protected mode" Windows Startup and saw that the process always hangs when loading "amdkmpfd.sys".
That is basically it.I guess I have to find a way to re-install the previous version of the BIOS.
Now about what I did to fix this (poor, but I tried):
If I try to start from a Win7 installation CD-ROM (actually it is one for Dell PCs, but I guess that is not the problem) and press a key to boot from CD, Windows loads files, shows "Starting Windows"Â and at a certain point again just freezes. When I -do not- press a key, WIndows Boot Manager shows up and mentions that "Windows failed to start (etc.)" "File: EFIMicrosoftBootBCD" "An Error occurred while attempting to read the boot configuration data."
I can't even boot into Linux on a USB stick, because the Windows "Error Recovery" won't let me when I try (just offers to boot to Win7 in protected mode - it could be that it fails immediately and jumps back to Win Startup).
View 1 Replies
View Related
Jan 18, 2009
I have to either Launch start up repair or start windows normally. I've down the start up repair and it says that it is finished turns the laptop off and then restarts but when it gets to the boot up screen it just runs with the little bar with arrows going along for ages and doesn't progress so I have to switch the laptop off again which means next time I start it I go back to the initial problem.
I didn't get a recovery disk or anything with my laptop so not sure if there is a way of getting in and partioning the disk otherwise or rebooting the hard drive.
View 7 Replies
View Related
Feb 26, 2010
I have problem with my Acer Aspire 7520G. When I turn it on, after memory check and disk check I got messages:
Resource Conflict PCI Serial Bus Controler in slot 01
Bus:01 Device:04 Function:00
ERROR
Bus:01 Device:04 Function:01
ERROR
Bus:01 Device:04 Function:02
ERROR
Bus:01 Device:04 Function:03
ERROR
Bus:01 Device:04 Function:04
ERROR
after this wont boot neither from HDD nor CD/DVD. Just blink currsor apears.
After a few of restarts, if I got luck, it will boot up "normally". I checked in Windows system that Bus 01 Device 04 is acctualy
Ricoh 1394 OHCI Compliant Host Controller at Function 00,
SDA Standard Compliant SD Host Controller at Function 01,
Ricoh SD/MMC Host controller at Function 02,
Ricoh Memory Stick Controller at Function 03,
Ricoh xD-Picture Card Controller at function 04.
View 9 Replies
View Related
Mar 22, 2010
i recently upgraded my acer 5536 laptop to win7 from vista via the upgrade disc i received after sending off to acer as i bought the laptop last october. i had previously made a vista recovery disc using the erecovery program built into my computer.
now i've upgraded i thought i would make a win7 recovery disc but i find that the built in acer software for doing this is now not on my system.
2 questions:
1. how can i burn a recovery dvd that i can boot from and reset my system to its first day as win 7.
2. if the above is not possible, what would happen if i tried to recover using my previous vista recovery disc. would it put my system back to vista or completely muck everything up?
View 6 Replies
View Related
