i just find that at "display properties" there is no color profiles..
Usually when we installs a screen, the icm or icc profiles comes with the driver.
My laptop has an Samsung 15.4 screen ... LTN154X3-L01
Is there any way to get an "color profile" for it?
i will say that "color profile" is useful for 2D graphics,
screens - scanners - digital cameras - software " Photoshop", uses this profiles as an way to preserve and display correctly the color tones on your screen.
I've been spending some time playing around with all the new Z's power options (which I assume are mostly related to Windows 7), but I find that I like the fact that each of the 3 "modes" can be assigned a different overall profile, with different behaviors whether plugged in or on battery.
So I can use "Auto" mode for daily use (where I'm generally plugged in) with Nvidia graphics and pretty much everything set for good performance without excess heat production. Then if I simply unplug to do some surfing for a couple hours in front of the couch, "Auto" drops down to the Intel adapter but keeps reasonable performance settings, Aero, etc .....
I just purchased a new Macbook Air two days ago and so far everythings be working fine except for fairly average battery life. I am new to Mac's having used Windows my whole life up until now and can't find how to change the energy profile. I've been told you can select this under the battery icon on the top toolbar, however when I click this I can only see "Power Source: ..." with no other options available.
As this website shows: [url] I should be able to switch between 'better battery life', 'nomal', and 'better performance'.
On the forums, i constantly see people complaining about the heat their laptop produces. Some people (like me) who use their laptop on their lap a lot, prefer to have the fan on constantly, to keep the laptop cool to the touch.
Others, they hate the noise the fan produces so they prefer the laptop to be not so cool, but they want it silent .....
I started to have a little issue with my LCD..Sometimes when I touch it on the top of the screen( where is webcam) or when I change the angle of the screen, the screen change to this error (greeen color is "error color"):
i just got a new laptop and if i go to a web page or a document with alot of close letters something like this 11111111111111 or lllllllll i get alot of red or green color bleeding in between the letters or numbers. is this normal for a laptop screen or is it a defect that i should be contacting acer on? by the way its a 17 inch screen.
also it is useually when it is all black letters or numbers with a white background
My laptop screen is distorted, it looks like the color is being drained from the the screen, every so often the original color returns, but not for long.
Sony should just get rid off ECO screens all together and offer only XBrite HiColor with 2 different resolutions and charge less for the one with lower resolution. It is very frustrating that you have to settle with inferior color if you want lower resolution
Why doesn't Sony have any LED screens on it larger screens? Compared to a MacBook Pro screen, is there a big difference? The MacBook Pro screens are very clear and bright. I was looking at a Sony VGN-FW480J/T. The screen is 1600 X 900. Is this a good screen?
I saw that the contrast ratio of the E6500 screen is something like 650 as is the Studio 15 's 1440x900 screen.
Is there a general consensus that these are superior to the 14.1" LED screens? I am led to believe that the T400 and E6400 are using the same Samsung/LG LED screens. I have seen the T400 and sent it right back b/c I got a Samsung screen that looked like milk. It was bad.
Is there a lottery to the Studio 15 and E6500 or will any LG or Samsung or AUO or Chi-Mei panel do? Are you guys pretty much happy with these screens? The notebook check or notebook journal numerical evaluation would put these screens on par with macbook pro, at half the price.
i've got a DV9500 CTO 17" laptop that gots a little blue things on the top left hand corner. i've also got a new HP 17" Pavilion dv7-1261wm 17" laptop as well. i was wondering, if i took both of them apart, and changed just the LCD screen, not the whole lcd panel. do you guys think that i might be able to switch out the screen on it and hopefully get the bad screen on the slower dv7-1261wm and get the better screen on the DV9500 laptop? i can't change the webcams or anything since the whole design on the dc7-1261 is different than on the dv9500. would it be possible to just change the lcd? i think i have a whole blob of stuck pixsls or something on the dv9500, cause its just blue on the top left hand corner and it never goes away.
i just wanted to know if this was possible before i open both of the suckers up and realize it might not be possible to just change the lcd screen.
3 different Latitude D810's that we wanted to add some life to. So we purchased 3 SSD drives,
two 64GB IDE/ATA Transcend MLC based units and 1 RiData 16GB SLC IDE/ATAunit. (Yes, the SLC is far faster with writing than the MLC drives).
Using our standard image, everything works fine. Except when removing the power cord from the back of the unit, it goes to a black screen, any hard drive (SSD drive) activity ceases.
When doing the same thing with a traditional hard drive, the screens blip black for a brief moment, but the computer keeps running as expected.
Some of you might now as I posted in my other thread that I'm not sure the screen I received with my refurb'd E6400 is the WXGA+ LED backlit like it promised in the invoice.
The primary reason is is that there is a sticker on the bottom of my laptop that says "Made in Malaysia" and also "Hg" with a circle around it. This is mercury; contained in CCFL backlit screens .....
I am a Thinkpad user but extremely interested in the Dell M4400 and M6400 because of their seemingly better screens. I would love to get details on these screen, most importantly are the IPS ("FlexView")?
Questions:
1. What does "Edge To Edge" mean? 2. What does "RGB" mean? 3. Are any of these screens IPS "FlexView"?
M6400:
17" WUXGA UltraSharp Display (1920x1200) Resolution 17" WUXGA RGB LED Back-Lit Display (1920x1200) Resolution 17" WUXGA RGB LED Edge To Edge Back-Lit Display (1920x1200) Resolution
M4400:
15.4" WUXGA TrueLife RGB LED display (1920x1200) featuring 100% Adobe® Color Gamut 15.4" WUXGA AG day light viewing (1920x1200)
I know when we first got our's we read about the grainy LG Screens and worked hard to avoid it.
Now we are looking to get a replacement system. Has this issue been resolved? Or do we still need to be on the look-out for those bad screens and make a special request not to have the LG ones
I own a dell vostro 1400 laptop. Just lately its gone a little crazy.
I push the power button in, the post screen would come up but instead of it filling the whole screen, the screen is split into 6 parts. I have 6 of the same image on my screen.
This continues onto the windows loading screen, which after it restarts and does the same thing
I don't know if this has been discussed in another thread, but I am having a problem that has never existed before until Windows Vista & Windows 7.
When Windows 95, 98, 2000, ME, & XP would go into the power saving mode just to turn off the display, it would always work. Now with either Windows Vista or 7, it does not
Anyone getting eye strain or headaches from the new Macbook screens?
Just trying to see if its me. Also wondering if it's just a bad streak of headaches, which has happened before. So anyone else having headaches from or it?
I do spend about 6+ hours staring at the screen, should I try taking more breaks maybe?just hoping its not the screen as I love my macbook.
Apple has new venders making thier screens on the Macbook 13" Alum. Supposebly, these new screens are so supposed to be better than the old one. I went to best buy but they only have old models out. Has anyone seen the new screens? I'd like to know how much better they are...especially the vertical viewing angles.
I have a Dell XPS M1330 laptop I use extensively. Its been reliable and quick. Im receiving blue screens twice per day and have had drivers reinstalled by a support company to no avail. Ive run basics diagnostics with no issues. How can I troubleshoot this?
