I have a 3690-2970.Everything is on the C partition of my hard drive and I can't get anything to write to the D partition.The C partition became full.This caused an error in Vista that required a clean reinstall of Vista.How can I get files to write onto the D partition of my hard drive?
View 6 RepliesI have damaged the right shift keycap - it is still in place but badly defaced.
I live in Spain, so finding a repair facility is difficult (believe it or not).
I would like to replace the keycap - but I can't discover what key type it is (I was going to try to get a replacement from a seller on eBay in Canada). The seller lists key type A-11, A-12, A-18, A-37 . To purchase, I need to specify which type.
[url]
i am reluctant to attempt to remove the key to check the type.
Can anyone tell me me which type the aspire 3690 has?
Or maybe someone has already replaced a keycap on this model and can recogise the type I need to specify?
A friend has a 3690. Haven't seen it, but this is what they describe as happening.
Sometimes! on startup four? beeps are heard and nothing appears on screen. Turn off/on again and it will most likely boot into Windows BUT the clock is wrong, reverts to July 2005 I think. Reset the clock and all OK, until the next time it happens.
Somedays it behaves, other times not so, maybe doing this twice in a day.
As the clock is wrong does this perhaps point to the CMOS backup battery?
Any other checks we can do?
Would entering the BIOS at start up ? "F2" prove anything. I know it's difficult when its not in front of you.
I have a aspire 3690 running vista. The left side of the keyboard types fine. The right side some keys don't work other type multiple letters and preforms different action. I replaced the keyboard twice thinking i bought a faulty one but still have the same problem. If i use a external USB or the onscreen keyboard it works fine. I also flashed the bio and still no change.
View 7 Replies View RelatedI have to Laptop Acer Aspire 3690, But same days ago laptop does'nt work Good. i would like to say that when i press (power switch) butten Laptop just responce for a 1 mint and then off ...
i have to a litta bit information about desktop computer CPU, so that's why i am trying to repaired . when i open my laptop and all thing motherboard, i don't understand what can i do bcoz i don't know where is that problem in motherboad, ... and and then i have to performed spray in motherboard. and then i closed the motherboard all thing , and i gone to connected main power and pressed switch power but does'nt responced me ,
I have a Acer Aspire 3690. It has a Intel Celeron 420 M @ 1.60 Ghz with 512 RAM (Recently updated to 2 GB)
Now I am pretty sure this is compatible with mine: (Here)
(NewEgg seems to be having problems with the website, just fyi, unless it is my computer)
It is a Intel Core Duo T2300 @ 1.66 Ghz. Now I have been wanting to know if the SOCKET is correct. Now according to NewEgg, it says it is a Socket M. Now according to utilities I have been running it says mine is a Socket 479.
So I looked that up and it turns out is it is basically a 478 (478 Pins) but they just said 479 for differentiating. And I have heard that Socket M and 479 are NOT the same and i have heard that they are, because sites such as NewEgg dont have Socket 479 processors cause they are actually Socket 478 Processors.
So anyways, i wanted to look up the package type to help me identify. My Package is a Micro-FCPGA. Now the one I want to get is a Micro-FCPGA as well. Now NewEgg doesn't tell you this.
So i found this place: (Here)
They called there Socket a: Socket 479 Pin.
Then i scroll down and it says: The Intel Core Duo Processors are available in 478-pin Micro-FCPGA and 479-ball Micro-FCBGA packages. This is 478-pin Micro-FCPGA package. Model: BX80539T2300.........................
I'm working on my friends laptop (model mentioned above). He does not have the eRecovery CD so I'm unable to restore the machine back to factory. I tried loading XP Pro (Volume License) before and after disabling D2D in the BIOS and wiping the HDD.
Once the installation begins, the machine begins to install the necessary files normally, I reach the "Starting Windows" prompt then the machine crashes to the following error(s):
Technical information:
*** STOP: 0X0000007E (0XC0000005,0XF854A0BF,0XF8996208,0XF8995F08)
pci.sys - Address F854A0BF base at F8543000, Datestamp 3b7d855c ***
No additional hardware is attached to the machine during install, It has the default hardware installed. The same Volume License install disk worked fine on an older Aspire 3000 model, Dell, Gateway and (2) custom builds.
Have a new 3690-2970 with 512 memory Vista Home basic and it runs extremely slow. It has only been on the internet to do MS updates so I know it is not infected with spyware causing it to run slowly. I was thinking a memory upgrade would help.
I got DDR2 533 SO-DIMM, 200-pin memory for it 1 gig but can't for the life of me determine where the memory chip is located
I have looked in two areas on the back of the notebook and can't find it. I looked under Hardrive. and then there is another small panel with one screw but when I opened that there was just this chrome box in there.
Question 2 once I find it can I use both the 512 and 1gig together or only the one 1 gig chip?
I tried locating a tech manual on this notebook and none of the links showed manuals for this model.
My PC allows me to save and burn files onto CD-Rs- but everytime I insert a DVD-R to do the same, a message pops up saying "please insert a writeable disc."
I've tried formatting the DVD-Rs, but the same message appears, or says "no disc detected, please insert a writeable disc."
Do I need to use DVD+Rs or buy a DVD driver?
I've had this Aspire for a while but I never got the media keys (play, stop, etc) to work.
Another thigs that doesn't work is the scroll key below the touch pad.
How can I get them to work? I feel like something has to be configured/installed.
I'm getting a BSOD while trying to run a few small indie games (reflexive arcade), Diablo II as well. The title will begin to load then I'll be taken to a BSOD shortly thereafter, the screen goes pretty quick and I'm unable to read it. A handful of other, similar games run fine, not sure what the issue is.
Acer 3690
Win Vista Home 32bit
Intel Celeron M 1.6GHz
512 Ram
Mobile Intel 945GM Express
The left click on my 3690 has quit working,and when I use the touch pad to control the cursor,it drags a blue box around.I tried uninstalling the drivers and reinstalling but I get the same problem.I also tried to update the drivers with no luck.I think it's a hardware problem.Any other suggestions?I wouldn't worry about it,but I use it to run my GPS,and I can't use a mouse in my vehicle.
View 4 Replies View RelatedMy toddler has cracked my 15" LCD panel in my Aspire 3690. I have seen many parts available on ebay for my model number.
I was wondering if anybody knows if I replace the entire top lid would the 15.4" glossy work with my hardware?
I have 4 partitions on my disk as shown in Disk Management. I don't use hibernation, so I want to reclaim the 8GB partition for use as storage. I have a few questions regarding this.
1) What will I compromise if I remove the 8GB partition, other than hibernation?
2) I right-clicked on the OS partition and selected "Shrink Volume". I received the popup shown in the attached image below. It doesn't reflect anything about returning the 8GB partition to the OS partition. In fact, shrinking goes against my intention of expanding the OS partition to include the 8GB. Right-clicking on the 8GB partition only brings up "Help" in the context menu and is not shrinkable.
3) Can I do this any time after having used the laptop for a while, with data and programs already installed? Does the process affect existing files and installations?
while my HP laptop was being repaired at Best Buy, I needed a computer. Best Buy luckily has a program where you can buy an "open box" computer and return it with no restocking fees, etc. while yours is being repaired. I was fortunate enough to find an Acer 4730Z for under $300, which was great for a "temporary" fix. I fully intended to take it back after mine came home.
But, as I've used it, I've liked it, and my DH's laptop is slowly dying, so for that price, we think we are going to go ahead and keep this Acer for him.
My problem is this: the hard drive came divided into two equal drives, C and D, both with roughly 111 GBs. The main software seems to be on the C - there's only 73 GBs free there, where D is completely empty.
I know we could adjust, but everything document, picture, and music-wise wants to save to C, but obviously D is the more free space.
Can I unpartition this drive, or, at the very least, make D smaller so that there's more room on C, or switch the OS stuff to D and make C bigger?
Having already done a clean install of Vista Ultimate, and thoroughly configuring my system away from the Acer factory default, and having burned both Acer and my own recovery disks (the latter using Complete PC Backup right after the clean install), do I really need the PQSERVICE partition anymore?
If not, I'll make sure to delete it next time I clean install - when I get my new T8300 in a few weeks.
This is weird. Previously I have two active partitions on my acer 8930G-7665.
Drive C: is 250GB and Drive D: is 250GB
Currently Drive D: is missing. I went to the disk management under WIN7 to mount or even assigned a drive letter to my inaccessible partition.
Disk Management can see the inaccessible partion but the problem is that the program wont give me any option to play with when I right click it. Please see attachment ...
On my Acer 9410 laptop I have a 150Gb disk that I divided into 2 partitions, each one 75Gb. After having installed a program my 2nd partition appeared completely empty (Windows XP with all updates). It did not even let me re-format it. I ran into UBCDWin and I tried it. From UBCDwin the partitions are ok, all the files are there and I backed up both partitions to an external disk. I used UBCDwin because trying to repair my partition my laptop went into a continous restart loop and other errors, so it was the only way to restart it (apart from Windows install cd). What can be the cause ? Is here a way to rebuild my directories ? I did all the usual (ad unusual) troubleshooting... that is:
my laptop is (or was...) using XP and it had all the drivers rigorously updated, as well as XP itself. The program I was installing was Mediachance Edit Studio 6. After rebooting, as I mentioned, my "D" partition was 100% free, as if all my 50Gb of data had disappeared. It also had no name (it had a generic "Local disk" label, while before it was labeled as "Acerdata"). Also, this partition "could not be formatted" from XP. First thing I tried was to get to a previous restore point, but Windows warned me that since there was no more D partition it could not recover it, so I did not do it. Then I did my scans with Avast, Eusing Registry Cleaner, CCleaner, Advanced System Care, and then chkdsk, RAM check, etc. with no results. At a certain point I managed to copy part of the D partition on the C drive (I can't remember how), but I think there was little space left on it (the C drive), so my laptop entered into the restart loop (BSOD) with the CONFIG_LIST_FAILED error, probably due to the lack of space for the paging file. Then I managed to stop the auto restart (from the Control Panel, ecc) and it showed me the STOP 0x00000073 (0x00000001, 0xC00017D, 0x000000002, 0xF6818BB8) error. It did not boot in safe mode and/or last known working configuration. With another computer I downloaded and made cds of BART Avast and UBCDWin, I tried many of the utilities in these with no result. Last thing, using UBCDWin (from which all my files were there and the D partition was ok and has its original name), I managed to copy both my original partitions, C and D, on an external USB 2 drive, so I probably would be able to recover all my data if I'll reinstall Windows and format disks from scratch, but before doing this I'd like to see if there's some other option...
I'm planning to kick my Aspire 5024 laptop back to the factory settings, but wanted to put one uncertainty to rest.
I understand C partition will be restored to out-of-box condition and it no longer contains anything important, all is backed up. However, I have run out of storage space with backing up the D-partition. The partitions are as they were when machine was bought.
Will Acer eRecovery touch the D: (DATA) partition if I instruct it to restore the factory setup? I have found multiple references saying both yes and no. Part of it is due to ambiguous language ("all files will be wiped" "the HDD will be in the condition you bought it" vs. assurances that D: is safe)
I have this hidden partition on my notebook (aspire 6920G) and I have no idea what is it used for. I know that PQService is recovery partition but I've never heard of this. By googling I've found that HP's used to use Compaq Setup partition to boot bios (?), but this is acer. I would really like to get rid of it (because now I can't create another primary partition).
View 6 Replies View RelatedSome time ago i install W7 and come here to ask for drivers, well, today mi brother hung up all the programs and W7 goes black. Now when I restart the computer I have a black window and nothing more.
Well finally i can put to work my Restore DVDs and go back to the original set up with windows vista with all working.
But i have a old problem, when i create a new partition at vista (and the partition i make with W7) when i restart that partition transform automatically in a Healthy(EISA configuration) partition type.
I recently bought an Acer 5610z from a family member that didn't need it anymore and it didn't come with any documentation or software save for the Vista OEM DVD. I proceeded to immediately wipe the HD and make a new install with Vista on a 20 GB partition and my remaining space reserved for programs and the like.
About 2 days later I realized I was missing space on my HD and realized there was a hidden partition for recovery called PQSERVICE. This is my first notebook and I had no idea how hard it is to find drivers and was having a hard time finding all the drivers and programs I needed (even from the manufacturer most of the drivers/utilities are for win XP).
I didn't make the recovery DVD's so I thought it might be possible to find the utilities or drivers on the hidden partition. I've unhidden it but I'm at a loss as to where to find them or if any drivers or utilities are even on it.
At this point do I even need the partition or can I delete it? I'd love to find someone with a copy of the DVD's at factory default settings but...
Would an 18 month old Acer 3690 that shipped with VISTA have the option in ERecovery to reinstall the whole OS from the hidden service partition. I know XP versions do, what about Vista ?
haven't got the notebook here... when I upgraded XP to Vista I remember that ERecovery at the time wasn't supported... wouldn't work with NFTS or something according to Acer.
I have had to recover my Acer Aspire 5103 laptop twice now and on both occasions the Recovery (Alt + F10 at the acer logo) did not work.
I have now reinstalled Windows Vista after formatting and partitioning my hard drive into 3 equal partitions with C and D in NTFS format using Paragon Partition Manager.
That is 112Gb of 120Gb because the recovery software is on the 8Gb hidden partition and I intend to install Linux on the 3rd partition.
how to unhide the hidden partition so that I can format it and merge it with the C drive.
I have downloaded all Vista and Acer drivers and programs so the hidden partition is surplus to my requirements.
Booted up my 6920 this evening and I don't have a drive D: anymore! I checked the disk management utility and it's showing the drive as an healthy OEM partition, with no drive letter. Right clicking the drive only gives me the Help option for the DMU, so I can't assign a letter or do anything with the drive - even format it!
I don't actually want to format it, of course. I want the drive letter back.
So far, I've tried a Windows System Restore to a checkpoint yesterday (when I last accessed the drive), but that's not sorted it.
For reasons that are too long to explain, I managed to destroy this partition on the hard drive of my Acer 4539G laptop. So no PQservice partition and the original Acer MBR is gone too. All I have left is a couple of FAT32 partitions.
I do have the contents of the PQservice partition on a USB stick.
Is there a way to recreate the PQservice partition, so that Acer's eRecovery would work again?
how to retrieve acer hidden partition.i accedentally delete ie.dont have backup for it,have a backup the acer factory setting but but didnt recover the hidden partition.
View 10 Replies View Relatedhow to partition my hdd?
(using Acer Recovery CD to install Win XP)
I have an Acer Ferrari 3000Lmi notebook.
I just replaced the hdd with a new one.
it's 80GB 5400 rpm, IDE
It's not formatted and it's not partitioned.
My notebook is an old model,
so I don't think there's a recovery partition and it doesn't have an e-empowering acer button, etc.
It only comes with Acer recovery CD's.
when I put the new hdd in, it's detected in bios,
so I installed Win XP Home using the Acer Recovery CD.
and it didn't have option to format or to partition my hdd there.
everything just ran automatically.
and now I have one C: drive.
Can anyone help me on how to partition my hdd ?
I prefer not to use partition magic/other programs to partition my hdd.
I don't know if I have DOS.
I don't mind installing XP all over again, I just don't know how to format/partition the hdd before using the recovery CD.
I have an aspire 4930 laptop which came with Vista pre-installed. To cut a long story short I installed windows xp to replace this which has been a total disaster (although the system is still working). I would like to start afresh with vista so need to do a factory reset. I have no recovery CDs.
I can confirm that the hidden partition PQSERVICE is intact. I cannot however run the erecovery software from windows because it was lost along with Vista and as far as I am aware I cannot download a windows xp compatible version.
WinXP over-wrote the ACER MBR so the Alt-F10 command stopped working however I have used a live CD version of GRUB to boot to the recovery partition, sidestepping the need to restore the Acer MBR. When the vista partition boots up Acer eRecovery Management loads, however the "restore system from factory default" and "restore system from user's backup" options are both greyed out.
I want to reimage my laptop back to the original manufacturers install when you get it new. The only problem is i didn't get any cd and i don't know which button to press. I can see the partition with the original image on it.
View 5 Replies View Related