I'm getting a BSOD while trying to run a few small indie games (reflexive arcade), Diablo II as well. The title will begin to load then I'll be taken to a BSOD shortly thereafter, the screen goes pretty quick and I'm unable to read it. A handful of other, similar games run fine, not sure what the issue is.
Acer 3690
Win Vista Home 32bit
Intel Celeron M 1.6GHz
512 Ram
Mobile Intel 945GM Express
I have a 3690-2970.Everything is on the C partition of my hard drive and I can't get anything to write to the D partition.The C partition became full.This caused an error in Vista that required a clean reinstall of Vista.How can I get files to write onto the D partition of my hard drive?
View 6 Replies View RelatedI have damaged the right shift keycap - it is still in place but badly defaced.
I live in Spain, so finding a repair facility is difficult (believe it or not).
I would like to replace the keycap - but I can't discover what key type it is (I was going to try to get a replacement from a seller on eBay in Canada). The seller lists key type A-11, A-12, A-18, A-37 . To purchase, I need to specify which type.
[url]
i am reluctant to attempt to remove the key to check the type.
Can anyone tell me me which type the aspire 3690 has?
Or maybe someone has already replaced a keycap on this model and can recogise the type I need to specify?
A friend has a 3690. Haven't seen it, but this is what they describe as happening.
Sometimes! on startup four? beeps are heard and nothing appears on screen. Turn off/on again and it will most likely boot into Windows BUT the clock is wrong, reverts to July 2005 I think. Reset the clock and all OK, until the next time it happens.
Somedays it behaves, other times not so, maybe doing this twice in a day.
As the clock is wrong does this perhaps point to the CMOS backup battery?
Any other checks we can do?
Would entering the BIOS at start up ? "F2" prove anything. I know it's difficult when its not in front of you.
I just got my e6400 and the first thing I see when I boot is this stoopid BSOD, "a problem has been detected and windows has been shut down to prevent damage to your computer"
I have vista ultimate. I went into the bios and everything seems ok. I fear a memory problem. I am running the diagnostic tests but I don't have much hope on them.
I get random crashes and the apparent crashes I get all relate to this error message:
Realtek RTL8168/8111 Family PCI-E Gigabit Ethernet NIC (rtlh86.sys, rtlh64.sys)
This problem was caused by a missing driver for Realtek RTL8168/8111 Family PCI-E Gigabit Ethernet NIC (rtlh86.sys, rtlh64.sys), which was created by Realtek Semiconductor Corp.
According to the spec sheet for my laptop and Hp's website this is what I have on my laptop: Realtek RTL8101 Family PCI-E Fast Ethernet NIC rather than the 8168.
Could this conflicting information be the source of the problem? How come Windows shows a different NIC to the HP website? I've tried to download the driver off the Realtek website but I find the website frustratingly annoying and basically pants (for such a global player)!
I have a aspire 3690 running vista. The left side of the keyboard types fine. The right side some keys don't work other type multiple letters and preforms different action. I replaced the keyboard twice thinking i bought a faulty one but still have the same problem. If i use a external USB or the onscreen keyboard it works fine. I also flashed the bio and still no change.
View 7 Replies View RelatedI have to Laptop Acer Aspire 3690, But same days ago laptop does'nt work Good. i would like to say that when i press (power switch) butten Laptop just responce for a 1 mint and then off ...
i have to a litta bit information about desktop computer CPU, so that's why i am trying to repaired . when i open my laptop and all thing motherboard, i don't understand what can i do bcoz i don't know where is that problem in motherboad, ... and and then i have to performed spray in motherboard. and then i closed the motherboard all thing , and i gone to connected main power and pressed switch power but does'nt responced me ,
I have a Acer Aspire 3690. It has a Intel Celeron 420 M @ 1.60 Ghz with 512 RAM (Recently updated to 2 GB)
Now I am pretty sure this is compatible with mine: (Here)
(NewEgg seems to be having problems with the website, just fyi, unless it is my computer)
It is a Intel Core Duo T2300 @ 1.66 Ghz. Now I have been wanting to know if the SOCKET is correct. Now according to NewEgg, it says it is a Socket M. Now according to utilities I have been running it says mine is a Socket 479.
So I looked that up and it turns out is it is basically a 478 (478 Pins) but they just said 479 for differentiating. And I have heard that Socket M and 479 are NOT the same and i have heard that they are, because sites such as NewEgg dont have Socket 479 processors cause they are actually Socket 478 Processors.
So anyways, i wanted to look up the package type to help me identify. My Package is a Micro-FCPGA. Now the one I want to get is a Micro-FCPGA as well. Now NewEgg doesn't tell you this.
So i found this place: (Here)
They called there Socket a: Socket 479 Pin.
Then i scroll down and it says: The Intel Core Duo Processors are available in 478-pin Micro-FCPGA and 479-ball Micro-FCBGA packages. This is 478-pin Micro-FCPGA package. Model: BX80539T2300.........................
I'm working on my friends laptop (model mentioned above). He does not have the eRecovery CD so I'm unable to restore the machine back to factory. I tried loading XP Pro (Volume License) before and after disabling D2D in the BIOS and wiping the HDD.
Once the installation begins, the machine begins to install the necessary files normally, I reach the "Starting Windows" prompt then the machine crashes to the following error(s):
Technical information:
*** STOP: 0X0000007E (0XC0000005,0XF854A0BF,0XF8996208,0XF8995F08)
pci.sys - Address F854A0BF base at F8543000, Datestamp 3b7d855c ***
No additional hardware is attached to the machine during install, It has the default hardware installed. The same Volume License install disk worked fine on an older Aspire 3000 model, Dell, Gateway and (2) custom builds.
Have a new 3690-2970 with 512 memory Vista Home basic and it runs extremely slow. It has only been on the internet to do MS updates so I know it is not infected with spyware causing it to run slowly. I was thinking a memory upgrade would help.
I got DDR2 533 SO-DIMM, 200-pin memory for it 1 gig but can't for the life of me determine where the memory chip is located
I have looked in two areas on the back of the notebook and can't find it. I looked under Hardrive. and then there is another small panel with one screw but when I opened that there was just this chrome box in there.
Question 2 once I find it can I use both the 512 and 1gig together or only the one 1 gig chip?
I tried locating a tech manual on this notebook and none of the links showed manuals for this model.
My PC allows me to save and burn files onto CD-Rs- but everytime I insert a DVD-R to do the same, a message pops up saying "please insert a writeable disc."
I've tried formatting the DVD-Rs, but the same message appears, or says "no disc detected, please insert a writeable disc."
Do I need to use DVD+Rs or buy a DVD driver?
I've had this Aspire for a while but I never got the media keys (play, stop, etc) to work.
Another thigs that doesn't work is the scroll key below the touch pad.
How can I get them to work? I feel like something has to be configured/installed.
it seems I've gotten my first BSoD in years, in boot camp, Vista x64.
I was watching a movie, and exited full-screen, and for some reason I wanted to resize VLC's window (the one that has the movie playing) - while the movie was playing.
The audio froze and then bam! BSoD. It was kinda quick, I didn't get to see which .dll caused it.
Could it be an audio issue since the audio froze? Or a video issue since that's where it all started from?
The left click on my 3690 has quit working,and when I use the touch pad to control the cursor,it drags a blue box around.I tried uninstalling the drivers and reinstalling but I get the same problem.I also tried to update the drivers with no luck.I think it's a hardware problem.Any other suggestions?I wouldn't worry about it,but I use it to run my GPS,and I can't use a mouse in my vehicle.
View 4 Replies View RelatedWhat is the method to automatically launch an application when the user logs in. Does it involve putting an alias of the app in some specific "startup" folder, like in Windows?
I am trying to install an older scanner driver on my new MBP, which I was only partially able to do. The "button manager" app, would not install automatically using the installer app. Hence, in order for the buttons on the scanner to work, I have to first manually launch the Button Manager. On my older MB, it would launch at login, so it was resident at all times. I none such difficulty installing the same driver package on the old MB.
I find it odd that my new MB has so many quirks that my 1 year old MB unibody does not. They are running exactly the same OS version. Hmm And Migration Assitant left a boatload of stuff (such as this), unmoved.
During a restart, a prompt to the effect of "Push Enter to Interrupt Startup" appears beneath the Lenovo logo. When I depress the Enter key, I get the message "Launching the startup interrupt menu" and then the device merrily continues on its path to launch Windows 8.1 Pro.
Initially, I thought this may have had something to do with a recent update to the Fingerprint Reader; however, de-installing that package had no effect. I can workaround this glitch; however, it was so nice to be able to simply specify something like a different boot device rather than having to go into the Setup menu.
My problem is that when I'm connected with the t540p to the ultradock that this sound comes from the local speakers instead of through the HDMI cable though the monitor and then through my external speaker which are way better.
In the Sound playback devices I have written: "High definietyion Audio Device Not plugged in".
So I tried connecting directly via laptops mindpoit to the monitor and then it worked. But as soon as I connected it to the docking station which is also connected to the same monitor via DVI plug then it results as Not plugged in.
So I tried upgrading the dock station firmware by downloading the fwdphb03 latest firmware, and this does not launch despite being connected to the docking station and using an external monitor and properly plugged in.
My toddler has cracked my 15" LCD panel in my Aspire 3690. I have seen many parts available on ebay for my model number.
I was wondering if anybody knows if I replace the entire top lid would the 15.4" glossy work with my hardware?
I noticed that alot more games are available for mac now than there used to be so I was wondering if I play the same game in windows vs OSX will there be a difference?
I mainly install bootcamp and win 7 for games only on my macbook pro but maybe I wont do that this time if the games run just as good in OSX.
im getting a bsod or it dosent boot when there is 4 gb ram but it works fine on 2 or 2.5 gb.
View 10 Replies View Relatedthe thing is during course work teacher told us to download vmware once i tried to run it i got the BSoD. the code was Stop: 0x000000D1 (0x8d885000, 0x00000002,
0x00000000,0x8edb9cf1) i didnt know acer doesnt provide recovery discs so i dint make one..
I have an Acer 3100 laptop and I've been trying to install windows on it for the past few days. The problem is after Windows formats the drive and copies the files, i'll get the BSOD after it restarts. I've tried using a different hdd and ram. I've tried installing Windows XP and Vista. I tried loading an image of a fully loaded windows but that didn't work. I ran ram and hdd testes but no problems show up. I'm really out of ideas now. I also updated the BIOS but that didn't help.
View 7 Replies View RelatedI have Acer Aspire 5315 and was running Bios v1.33. It has been running warm for sometime and thought an updated BIOS would help.
I tried the ACER site but didn't see any BIOS updates listed for XP. I have XP Pro on it now.
I followed a different link and found BIOS 1.45 so i Flashed it using WinFlash.
After it completed it shut down, i waited a couple of min. and powered back up, when i did i saw the BSOD for about 2 seconds and then goes to selective startup (Normal, Safe, Safe w/networking etc...)
I have not tried safe mode yet but in normal it just goes back to that screen again.
I saw the thread on using the FN+ESC mode but not sure if i really need to do that.
what I should do to restore it back to 1.33? I have to check my external HD but i think i still have that 1.33 version saved that i used when i did it the first time.
Having some very strange Win7 RC install problems on my Timeline 3810T.
First - If the SATA was in AHCI mode in the BIOS, I would get a BSOD every time the partitioning was complete and copying files begun. When this was switched to IDE mode, installation went off without a hitch. This is with the machine's stock 320GB hard drive.
Second - I've received a Corsair P256 SSD drive, based on a new "very compatible" Samsung controller. After installing this SSD, the BSOD occurs no matter which mode I'm in (IDE or AHCI). I cannot seem to find a way around this. I've tried loading all different version of AHCI drivers from Intel for the ICH9M-E, but no go.
I'd really like to unleash this SSD
Has any one else that owns an 8940G have any random blue screen errors
View 10 Replies View RelatedI have an Aser Aspire 5610 - 2328. The model is 5610z. I have the same issue with my webcam and it is orbicam with logitech software. I also here the unplugging sound and also get BSOD's. My laptop is under warranty and it has been sent in to be checked. They could not find any issues also when I click the orbicam icon first try it shows it disconnected. I try again it works. They still claim its working and nothing they can do they have also seen what it doese when clicking on the icon and still claim its working.
Not sure if they really checked the connections I will look into it. It is under warranty thru Wal-Mart and was sent to a place called Cyber Test in Longwood Florida.
I've been getting the BSOD error on my PC. The main ewrror is 0x000000f4 but I sometimes get the 77 error as well. Most times i need to reboot and then I get the 200 fixed hard disk 0 failed error . If I click F! i get yet another error, PXE.61 error and this takes my rebooting quite a few times in order to get windows xp (media center edition) to come uo it stays on for a while (the length of time is getting shorter and shoryer these days) and then I have to go through the entire scenario over again. I'm trying to remove the files and programs that I actually care about off this comp. I contacted Acer tech support and was told that it most likely a HArd drive problem and that it would need to be replaced They had the wrong warranty ending date for me and after providing proof of purchase, they changed it to 11/23/07. Now that I have about 8 days left on my warranty. the tech support person told me to purchase the extended warranty because if I ship it to them and the warranty expires, I will have to pay for the service. Now my question is this. I'm not too sure that it would be worth shipping it to them for repairs I will have to pay $99 for the warranty plus tax and At least $100 to ship it back to them. On top of that I have read horror stories about people who sent their comps in to be repaired and it being returned to them with scratches on the LCD, initial problems not repaird or additional problems after the comp was returned to them. I'd much rather carry it in to a shop but was told their are no local repair shops in my city except for geek squad and they will charge me since I didn't purchase my comp from them. WHat would you do take it to a local repair shop or pay the bugcks to extend the warranty and then pay to have it shipped to be repaired? Another reason why I am leery is because I bought a HP laptop last year. the Ac adapter jack ont he comp was loose so I shipped it to HP to have it repaired. they had my comp for almost a month and then told me the motherboard, keyboard, speakers, and LCD display was unsalvageable and that it would cost me over $1000 to have it replaced(i only paid $369 for it on black Friday). They also told me that I had a liquid spill which was a total lie as I keep my laptop in my bedroom and I never eat or drink in my bedroom.( come to find out that loose jacks are a known problem with some Hp laptops I have read horror storeies about Acer using the dreaded liquid spill excuse too and I don't want to go through the drama again. Are the BSOD errors definitely the fault of a faulty hard drive?
View 7 Replies View RelatedBackground:
A few days ago i bought an Acer 7730 laptop with Windows Vista pre-installed and no disks. After initial hesitation i have decided to keep vista and not downgrade to XP. After all there will be more service packs and tweaking should speed it up lots anyway.
However, i really want to get rid of the three partitions on the hard drive. There is only one physical hard drive but there are three partitions; a hidden 10GB one (EISA configuration) which from what i have gathered is now obsolete, a C: partition 111.44GB and a D: partition 111.44GB. There is no need to split a drive into several partitions now that we have the NTFS file system (unless you are using multiple operating systems of course - but i am not) so this is really annoying me.
I have made the 2 recovery DVD and the 1 applications/drivers DVD. I have an old WinXP disk that i can use to format the laptop if required.
Question:
Using the recovery disks (which i'm assuming contain a copy of my bought OEM Vista that was pre-installed on the laptop), can i delete the partitions, format the hard drive and install Vista onto a single c: partition?
I've done this exact process before with WinXP hundreds of times but i'm not sure whether i can do the same for Vista with just the 3 DVD mentioned...
I have an Acer Aspire 5672WLMi laptop and it has a built-in OrbiCam, every once in a while I hear a sound as if I was plugging/unplugging an USB device, sometimes it does that twice and then stops but there's times, like a few mins ago, that it goes crazy and I get a Blue Screen.
The message I get is "File lv321.sys has caused an error. Page fault in non paged area" and makes me restart.
After I do that, Microsoft Error Reporting tells me that I should update the drivers although I already did that or to unplug the camera, which is impossible since it's built in.
I have searched on Google but couldn't find much information except perhaps the wires that connect the camera might be loose/damaged and that's what causing it.
I have disabled it on the Device manager but it won't solve anything.
Is there a way to completely disable the camera port?
What can I do to fix it?
The laptop is almost 2 years old and is not under warranty.