Acer :: BSOD While Installing Windows
Dec 2, 2008
I have an Acer 3100 laptop and I've been trying to install windows on it for the past few days. The problem is after Windows formats the drive and copies the files, i'll get the BSOD after it restarts. I've tried using a different hdd and ram. I've tried installing Windows XP and Vista. I tried loading an image of a fully loaded windows but that didn't work. I ran ram and hdd testes but no problems show up. I'm really out of ideas now. I also updated the BIOS but that didn't help.
View 7 Replies
ADVERTISEMENT
Dec 14, 2008
I purchased CT699854 4GB kit (2GBx2), 200-pin SODIMM from Crucial.com for my Dell Inspiron 1720 laptop. The machine already had 2GB in two 1GB chips for both slots.
When I installed the new chips, Windows Vista Home Premium refused to boot. BIOS recognized the new RAM without problems, but when Windows started to load I immediately got a 0x7b stop error. This is strange, because that usually coincides with an AHCI problem, but that's already turned on in the BIOS with Turbo Memory and works fine.
When I take ONE of those 2GB chips out, leaving an empty DIMM slot, it boots fine. When I use one new 2GB chip in conjunction with one of the old 1GB chips, it boots fine and Vista recognizes 3GB of RAM. But when I push it to 4GB, I get the 0x7b BSoD. I've used all combinations of new and old chips, and it appears the new chips aren't bad as far as I can tell.
View 10 Replies
View Related
Aug 15, 2014
Laptop experienced random and very frequent BSODs after an automatic Norton update. Tried everything but only removing Norton stopped the problem. Removed Norton several months ago without even one recurrence of the problem so reasonably certain the cause was the Norton. Myy question is what antivirus program is known to run reliably on the HP g7? Currently don't have one installed because I don't know wht will run.
View 2 Replies
View Related
Jul 2, 2009
Having some very strange Win7 RC install problems on my Timeline 3810T.
First - If the SATA was in AHCI mode in the BIOS, I would get a BSOD every time the partitioning was complete and copying files begun. When this was switched to IDE mode, installation went off without a hitch. This is with the machine's stock 320GB hard drive.
Second - I've received a Corsair P256 SSD drive, based on a new "very compatible" Samsung controller. After installing this SSD, the BSOD occurs no matter which mode I'm in (IDE or AHCI). I cannot seem to find a way around this. I've tried loading all different version of AHCI drivers from Intel for the ICH9M-E, but no go.
I'd really like to unleash this SSD
View 8 Replies
View Related
Dec 19, 2014
The hard drive on my Aspire 5745 was replaced (same size 640 GB) when I install Windows, it hangs on the Windows logo as its swirling and about to start. I have checked in the BIOS to disable UEFI boot but unable to see this option.
View 1 Replies
View Related
Jan 13, 2009
I have brought a new dell studio 1435 laptop and they provided me with default windows vista home premiun OS.
I have installed windows XP professional OS after changing the BIOS settings for onboard devices (In BIOS:
Onboard Devices -> Flash Cache Module -> Set Off
Onboard Devices -> SATA Operation -> Set ATA)
Can i will be able to install the windows vista OS after installing windows Xp with the same BIOS settings for onboard devices (In BIOS:
Onboard Devices -> Flash Cache Module -> Set Off
Onboard Devices -> SATA Operation -> Set ATA)
View 4 Replies
View Related
Feb 25, 2009
Every time I put the bootable disk in to install windows xp it will get to the point of saying starting windows then I get the blue screen of death. How can I install windows xp? Right now it has vista home basic
View 10 Replies
View Related
Apr 29, 2009
I installed Windows XP 64 bit on my extensa 5420 and I've been finding it really hard to just access wireless LAN. I downloaded the drivers off of the website link in the other thread about extensa 5420. After installing those drivers, nothing happened because it couldn't detect my wireless adapter. The only network adapter detected is the 1394 net adapter. Under other devices (question signs next to them) are : Audio Device, Ethernet Controller, Mass Storage Controller, Modem Device on High Definition Audio Bus, Network Controller, SM Bus Controller.
How do I get LAN and wireless LAN to work? I love having windows xp 64 bit.
View 8 Replies
View Related
Sep 16, 2008
I have aspire 6920 and I love the features this computer has but I am not very happy with vista. Can I install xp pro? I know that deleting the pq service partition is not wise but I would rather have xp pro. How do I delete pq service? Also, is this action reversible? If I can install xp can I ever go back to the manufacturer OS? I have created the restore cd's but will they work without the pq service partition.
View 4 Replies
View Related
May 3, 2010
I just bought a Acer Aspire 5740DG and I want to reformat it and put a clean version of Windows 7 on it without all the useless that comes on these laptops.
Is it possible for me to do this using another Windows 7 install disk I have, but just entering the existing CDKey for Windows 7 that came on this system or is that impossible?
View 4 Replies
View Related
May 21, 2009
I have bought "Acer aspire TravelMate 5730".
I have installed windows xp professional. I want to change my bios setting for Sata mode to "IDE" to "AHCI" for that I have to install AHCI Drivers into win xp but I am not able to install AHCI drivers in win xp.
Whenever I am trying to install AHCI drivers, system gives me error
"System does not meet minimum requirements"
how to install AHCI drivers?
View 4 Replies
View Related
Jan 24, 2010
Well my PC came OEM installed with Vista 32 Bit edition and I would like to upgrade to Windows 7 Ultimate 32-bit edition (as i get a student discount).
Looking around the forums and internet in general, I have noticed that on the acer 6920g there seems to always be a problem with drivers such as the CineDash, Realtek, TV tuner, Modem, Card reader, Fingerprint, Webcam, Bluetooth etc.. I have also read that you can fix the launchmanager by running in Vista compatiability mode.
If i do an in-place upgrade (going from vista 32-bit to windows 7 ultimate) will it be fine? Also is there anything I should be cautionous of such as the drivers etc..
I would actually really like to do a clean installation but I'm worried that the keyboard "quick" buttons (such as the internet,bluetooth,mail on the side of keyboard will not work)- can someone please confirm if I did a clean installation, would theese buttons still work?
Also I have two games:GTA IV, Call of Duty 5 , will theese both work on windows 7 (or on compatability).
View 6 Replies
View Related
Dec 4, 2014
I got windows 8 when i got the computer from the store 1 year ago, and I install windows 7 now and i cant get the wireless internet to work for me. i have tried the HWWVendor detector and it says that i got broadcom and i downloaded those drivers and its not working.
View 1 Replies
View Related
Dec 21, 2009
I have an Aspire 1640 laptop with an internal Intel Pro/Wireless 2200BG network adaptor. Since upgrading my Windows XP to Windows 7, as a clean install the wireless will not work.
View 10 Replies
View Related
Nov 16, 2009
i have a acer laptop that did have vista on, i have upgraded this recently to windows 7, i have just today bought a new webcam which it says is windows 7 ready plus there are no drivers needed, i can just plug it in and it will work.
sounds nice and easy =]
well, i have plugged it in and it seems to be installing, finds the driver etc, then it says cannot install, then when i go into the device manager and click into the device it sayd access denied, i have tried alsorts to fix it, turned uac off etc and still does same thing, tried in safe mode, i just cannot do it.
View 10 Replies
View Related
Oct 29, 2014
Sequence of events:
1. bought a used Acer Aspire 7741G-6426 from my brother-in-law.
2. he had removed the hard drive, for security reasons
3. I bought and installed a Solid State Drive
4. I downloaded Windows 7 Home Premium from the Microsoft site
5. installed, successfully, Windows
6. Now, no Internet access. Device Manager shows an Ethernet Controller, but says the device driver for it is not installed. No wireless controller is found.
7. I downloaded the Broadbank LAN device driver from the Acer site (on another computer, of course; carried it over to the laptop on a USB drive). When I try to update the driver, Device Manager says it finds the driver but it is missing a file.
Is there another place to get drivers? Is there a self-installing driver available?
View 4 Replies
View Related
Dec 4, 2014
I replaced a dead HD with an Intel SSD on my TM 8473T. I have the latest BIOS version of 1.23.
I wanted to install a fresh version of windows (via USB) but when I get to the section on creating partitions, I get a "windows cannot be installed to this disk. This computers hardware may not support booting to this disk. Ensure the controllers is enabled in the BIOs menu".
The BIOs shows the SDD and the initial setup of widows shows that partitions are created but the install does not continues copying files over.
View 3 Replies
View Related
Feb 21, 2015
Trying too install windows 7 ultimate using Acer recovery disk's,it's hanging up everytime at ( installing cleanup 43-44). It's a 8951G-9630 Acer aspire.
View 4 Replies
View Related
Feb 10, 2015
I just recently picked up an Aspire V 17 Nitro and imediately installed Windows 7 on it. Everything is working pretty well so far but I noticed the function keys are not working. The ones where you hold down the "Fn" key and then do thing like adjust the volume.
View 2 Replies
View Related
Apr 16, 2009
I'm An Acer Aspire 6930G user and it has vista home premium installed as OS. Today When I was trying to install Windows Xp on it A blue Error Screen Appear in the beginning of windows installing...I tried with 3 different Xp cd's but still the same problem.
Here's the full form of what that blue screen says:
The problem has detected and windows has been shut down to prevent damage on your computer. If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow this steps:
Check for viruses in your computer. Remove any newly installed hard drives or hard drive controllers.Check your hard drives to make sure it is properly configured and terminated.
run CHKDSK /F to check for hard drive corruption, and then restart your computer.
Technical Information:
*** STOP : 0x0000007B (0XF78D2524,0XC0000034,0X00000000,0X00000000)
View 6 Replies
View Related
Nov 6, 2009
[url]
I recently installed Windows 7, and I re-downloaded the Acer Empowering Technology off the Acer website.
I can access all the features, but the Empowering Button doesnt function anymore.
My laptop is an Acer Aspire 5535.
View 5 Replies
View Related
Sep 26, 2014
I have Acer Aspire 5742G notebook and I'm having problems installing the Windows 7 OS on my new SSD hard drive (I bought the SSD because the original hard drive is failing and making blue screens all the time...)For the factory restore, I'm using restore discs. I burned the discs few years back when the laptop insisted me of doing it (by using eRecovery or something, 3 dvds total).
The computer tries to install the OS with the dvds (asks to insert a dvd and then press a key). The actual problem is that the installer is just going in loops, restarting and eventually freezing in the end.. Reboot -> Acer logo -> Windows is loading files... -> Starting windows -> Reboot -> etc.That kept going for more than a hour (on the first dvd!) and suddenly it just froze on the "starting windows" screen.. So I had to reboot and star over again.I can still use my old formatted HDD, should I make new set of recovery discs or use an USB drive?
View 5 Replies
View Related
Sep 23, 2014
I just bought my Acer Aspire V5-552g a week ago. Everything seems to be working fine. However, Windows advised me to install updates which I did. After installing the updates the touch gestures are not working anymore. I tried updating my drivers, which I downloaded from the Acer support site, but it did not work. All gestures are not working. What I need to do. Is this a result of updating Windows? How can I undo the update?
View 3 Replies
View Related
Feb 11, 2009
At random times but every few minutes, I keep getting BSODs that reference tdx.sys.
The problem seems to occur only if my integrated Broadcom wired LAN adapter is connected. I recently ran it for a few hours straight while using wi-fi and no LAN and it did not BSOD at all.
I have read online it has to do with the Broadcom drivers, but even after updating the drivers, the problem still exists. I also tried uninstalling the drivers from Dev. Manager and letting Windows reinstall whatever it wanted. Still no dice.
View 6 Replies
View Related
Feb 15, 2009
Ive been dealing with windows vista on this labtop for awhile and i am tired of vista. I had previously tried putting in a XP disk and tried to reformat and got a BSOD when entering setup. So i decided to by a new harddrive for the computer because the old harddrive was small anyways. [url] I put the new harddrive in and bios recognized that the harddrive was there. I then put in the xp cd and tried to set up windows again. The same problem happened so I thought it might be the xp CD. I went to windows msdn and i downloaded windows xp professional NO SERVICE PACK(for free) and burnt the image file onto a cd. I then tried installing windows again, and another blue screen of death. My bios is A07 and there is a new bios A08 and i dont know if it will help. Ive been looking around for posts on similar problems and for dell labtops ive seen they have said to get sata drivers. There are none for the dell xps m1210 to my knowledge. If someone could show me where i can find them that would be great. Ive also read people going onto the dell bios and doing something with autodetect. My dell bios has no section about harddrive, its the worst excuse for a bios. I currently can use the old harddrive with vista, if i need to update any drivers but i cant find any drivers that would help in my situation. [url] Do i need to use a newer service pack of XP to work with newer hard drives ive read that service pack 1 supports sata harddrives larger than 137GB? The blue screen comes during windows setup.
View 10 Replies
View Related
Jul 21, 2009
I decided to try out Windows 7 x64 on my Z, build 7600. I download all the vista64 drivers from sonys website and installs Windows 7.
and then, I'm going to install the drivers, so first of all I go to windows update and it says I have 3 updates, I click to update, BSOD. restart, click search for new updates instead, BSOD.
Confused as I am I start to install drivers from sony instead, chipset and display driver installs fine..
I ran the intel wireless driver installer, BSOD
then i try to install shared library, BSOD. setting utility series, BSOD, event service, BSOD.
and about there I pretty much just gave up and wrote this post wondering w t f is going on.
View 10 Replies
View Related
Feb 26, 2010
I have an XPS 1640 with the 3670 card. It came with vista, i put ubuntu on it, then figured it give win 7 ultimate 64bit a go since i got a free copy.
I had all the latest drivers/bios on it, and when I would try to resume from sleep id get a BSOD. Nothing suspicious in the event viewer, no dmp files anywhere. Just would not resume.
I tried fiddling with bios version and driver combos, and still nothing. The BSOD doesnt happen anymore, the machine just freezes on resume.
View 10 Replies
View Related
Apr 22, 2013
I have ignored the issue as long as I can but I am too often losing my current state when I hibernate my pc.The screen powers down which makes me think that the hibernation is happening as normal. However I still see the HDD power light remaining active for say 10 minutes.
The computer then throws a blue screen of death and then powers down.When I reboot I get the message Windows did not shutdown successfully. Windows will ask me to upload the crash dump file to Microsoft but I never get any kind of feedback.This process is quite frustrating.
View 15 Replies
View Related
Feb 19, 2008
I have 2 identical ThinkPad W530 laptops model 244723G
Both are set to discrete graphics from BIOS because with optimus driver my projector will not work at all.
But how i have other issue that causes BlueScreen when connection laptop to projector.
I have installed latest driver from Lenovo download site -> still BSOB when connecting to projector.
When i install driver from Nvidia site it fixes BSOD issue with discrete graphics and external projector.
Confirm that there is a error on Lenovo optiomus driver when using discrete graphics?
View 9 Replies
View Related
Nov 6, 2009
This took me a long time to find out... Read my post here to save yourself the time and just "make it work"!
[url]
View 3 Replies
View Related
