what tools can we use for benchmarking Apple/mac systems?
So far OpenMark is pretty much dead. I use XBench at the moment, but the result presentation is very much in text mode. Would be nice if we have something like Passmark Performance test tool of Windows.
Currently I have 2 PC's, a quadcore desktop for recording with Pro Tools, and a 13.3' Asus laptop for school. After seeing a friend use Logic Pro 8, I think I want to make the switch, but I have a couple questions:
1. With Pro Tools, you are required to have 2 hard drives, is that necessary with Logic Pro 8?
2. Will Logic Pro record fine with a 5400rpm HD, or do I need to upgrade to 7200rpm? (I only record a couple tracks at a time)
3. I think Logic Pro 8 would run fine on a normal macbook, but it seems like there is no firewire port? So do I have to spend the extra $700 to get a MBP for a firewire port?
4. Any MBP models I should avoid? I've never even looked into buying a mac before, so this is all new to me...ohh and yes I need a laptop and not a imac cause it needs to be portable since I will probably be selling both PC's...
i've installed kubuntu and when i click install parallels tools from the menu, the cd rom drive gets mounted but i cannot double click on the installer. i googled and i saw that i should go in terminal and type cd/media/cdrom. that didnt work as it said cannot locate folder or directory?
View 5 Replies View RelatedI have been trying to research what kind of "upgrade" the GPU actually received by getting a Geforce 330M 512MB card (in the 17 inch), compared to the 9600M GT.
Anyone got a good site that allows direct comparison of stats?
Everyone that I have looked at has the 330M pegged as a 1GB VRAM card... which is not the case this time around.
I'd also like to see how the 330M would compare to my current 8800M GTX card in my sager (although I know its not even close).
On Vista, if I want to scan something I simply go to Windows Fax & Scan, and literally press select the scan i want and press scan.
Can OSX Leopard do this? Cheers
Today's the day I was planning to go to Apple.com and buy a new Macbook pro, and i'm having a few small worries. The cost, the fact that it's my first Mac ever, what if I hate it despite enjoying it when I went to the store to check one out for real etc....
What's a good program for OSX to benchmark a SSD? Also, does anyone know if there's a similar program like Intel Matrix Storage Manager that will let me view all of a SSD drive properties (make/model/firmware/etc.) in OSX?
Unable to run bootcamp, or any xp/vista/7 on my friend's computer.
Any one know of tools to track down what is consuming space on a hard drive partition?
I am trying to provide remote support for my mother-in-law's Inspiron 8200. Last summer I put in a new HDD and maxed the RAM to get a couple more years out of it. I partitioned the drive into 10GB and 70GB. I installed Win XP home + all service packs and updates, prgrams etc. on C:.
I moved "My Documents" to the second partition, the drive letter ended up as E: for the second partition (optical drive is D. She only has about 3 GB of data so there should not be any issues.
She recently called saying that attempting to install TurboTax resulted in an insufficient disk space error. When I had her look into it, C: is almost full, 9.5GB used. This seems unreasonable to me. I have a couple of other laptops configured similarly and the OS and programs only take about 6.5GB. This lady is not one to install lots of stuff.
My daughter is there visiting so I had her read me the space taken by each folder in the C: partition. Adding up the numbers it seems that there is at least a couple of gig unaccounted for. Do I have to actually go into every folder to find any space hogs? Nothing I heard so far seems unreasonably large.
I am suspecting some kind of bug or spyware is creating a file that is consuming the space on C:. I had a problem with Zone Alarm 9 creating a ridiculous log file on one of my boxes but she is not running ZA.
E: has plenty of space only the 3GB of data in My Docs.
I just receive my new M1730 today and in the middle process of installation Vista on pair of 320GB HD.
What do you guys use to OC the 8800M SLI? What is the ideal clock setting?
Does Dell usually sned you 2 power supplys?
I did not order the extra PSU, but I received 2 of them and they are huge!
I am trying to replace my laptop fan in a Sony Vaio VGN-S270. I removed all the necessary screws and plugs to get to the fan, but there are three screws connecting the fan which I'm not sure how to remove. Two of them are located on the lower left of the fan and are gold in color. They appear to be spring-loaded and have a threaded center to the screw. This seems to be an extension of the fan itself and covers one of the chips.
The other screw is very small and is located up and to the left of the actual fan portion. This screw looks to have a circular head to it, but its so small I can't really tell what type of tool to use for it.
Just got me an Aspire 5536G (2.2 ghz Turion, ATI 4570) and it is running hot! After a few minutes of Prime95 the CPU gets up in the 90s (Celcius), and 15-20 minutes of gaming gets it there too.
Is there a tool that lets me undervolt and lower clocks? The BIOS is very anemic, so I cant set things there.
I am also looking for a good fan speed and temp monitoring program. I have tried a few but only CPUID HWMonitor reports temps for both cores and two more sensors (presumably located near the GPU). SpeedFan only reports one temperatur.
Last couple days, I have been getting the error msg: " HP TOOLS Drive E: running out of space... " then something about pls CLICK here to find out the free up some space... I click and the only thing listed is the RECYCLE BIN which is empty...
View 9 Replies View RelatedHow can i extracted Vaio Tools from the AW21Z recovery disc...
View 3 Replies View Relatedi just bought a XPS 16 threw the dell outlet and im curious as to how it performs in games and benchmarks with newer updated drivers.
im only planning on doing some mild gaming on it but im also slightly curious as to how well the HD3670 overclocks.
id like to see some 3dmark 05/06 numbers as well as numbers from some popular games like Crysis Warhead, left for dead, Assassins
i do a benchmark with my XPS1730 , and i got 11545.
View 3 Replies View RelatedI have a 8600gt with the 176.44 driver and I got 4802 marks in 3dmark06. I was wondering if that was better than the other drivers such as 175.97. (I was using the Zalman NC-1000 laptop cooler while running 3dmark06)
View 9 Replies View RelatedSo I decided to see what she can do, after going with a 7200RPM hard drive and picking up a T7600 for cheap, I got 9468 3DMarks out of her!
View 10 Replies View Relatedhow to interpret these benchmarks. what they mean...why do the first and second benchmark graphs differ so much? hp pavilion g60-120us amd dual core 2ghz, 3gb ram, 250gb hd, geforce 8200m vista home premium. running firefox with multiple tabs open, majic jack-internet phone, virus and spyware.
View 8 Replies View RelatedI'm getting the feeling mine is underperforming.
Here's mine:
even though this computer is hot to the touch and she is having a few issues with it i figure id put it threw its paces for you guys. id just like to mention before hand that we have the WLED screen (1366x768)
out of the box running with dell's 9.4 drivers it ran a 5060 in 3dmark 06
i ended up having to down grade the drivers to dell's 9.2 because i was unable to over clock with the 9.4's. however even with the 9.2 the only program that would work is AMD GPU clock tool. i was able to test it up to 749 mhz core / 945 mhz mem. it works like a charm, no artifacting or anything. with just one run threw 3dmark 06 it brought the temp up to 76C. after an 45min of looping the test the temps peaked and leveled out at 83C.
it idles around 60-63C at these clocks (stock idle is about 8C cooler)
anyways here are the results for 3dmark 06
dell 9.4 drivers= 5060
dell 9.2 drivers= 5004
dell 9.2 drivers OC(749c/945m) = 5520
i have yet to test if its stable at higher clock then these. i feel as though it still has a small amount of room left, maybe another 20 mhz on ether . i haven't had time to test this out yet though. im probably going to try undervolting the CPU and see if that brings down the temps any. ill report back with the results from both the CPU and GPU when i get a chance to do it all.
this is a spiffy little computer, im sure that once we resolve the screen and power supply issues with dell that my wife will be happy with the unit.
OC the GPU as follows
650 - 921 - 1625
3DMark06 result 10,277.
Submitted to NBF Benchmarks
i got my new CPU and i do an benchmark with 3.0 GHZ
and i got 12.713 points
If you own an Intel X-25M SSD, please post your benchmark score(s).
I am having an issue with my 4K read/write. It seems as tho they are 50% less than what they should be. Nevertheless, post your benchmarks. I want to know if any other DELL owners experiencing the same problem as i do..
I would have posted this in the Hardware SSD Thread, but that thread is just out of control. I am mostly interested in the Random 4K reads/writes and this is probably the most important attribute in everyday computing for regular users like us.
X-25M G2
X-25M G2
on a side note, can someone tell me why my 4K reads/writes are so much slower than what they are supposed to be?
On my old W520, it had a setting for making the battery last as long as possible. E.g. it didnt charge it to 100%.In my W530, which has windows 8, I can find no such option. In fact, all the Lenovo tools which came with the W520 dont seem to exist on the W530 (eiter because they dont have them for Windows 8, or they dont have them for the W530, dont know which).
The only lenovo tools I have are th "solution senter" from red icon in the task bar (which has a battery icon, but the only thing it does is say "batter is in good condition", there are no options or settings, and the thinkVantage button, which just brings up somehting like some shortcuts to control panel items - no Lenovo tools (just things like update drivers, warranty infomration, keyboard settings etc).
In the wiondows control panel itslef, are just: lenovo system healthlenovo update drivers 32bit (I never use this as I have 64 bit)Lenovo airbag protectionLenovo microphone muteIn control panel -> Power options is nothing Lenovo specific, and no lifespan mode, it only allows you to set when windows switches stuff off.
What happened to all the tools which came with windows 7, including the thing which told you how fast the processor was running, the thing to change your printer etc. with different locations?
i have a m1730 with 2.4 t7700, 8700m GT 256mb sli, 4gb rams, 200gb 7200 rpm raid 0. i used riva tuner and overclocked video card and memory to 750, 1500, 975 and got a score on 3dmarks06 of 93xx-94xx.
is there any way i can reach 10000? or is this pretty much maxed out?
yesterday i got my precision m6300 notebook from dell. so far i benchmarked it with 3dmark06 and took a short look at it. i payed 1483 euro and the laptop came with the following options: ...
View 15 Replies View Relatedjust wondering how you guys get on with modern games with the ati gpu as i may have to get one of these machines and any performance indicators would be nice to see
View 8 Replies View Relatedbenchmarking, I know about the vista experience scoring stuff so I was pleased to see that its a type of benchmark. 5.5 out of 5.9 ain't bad, huh (i wasn't expecting a number like that)?
View 5 Replies View RelatedTHE PERFORMANCES OF ASPIRE 6935G
Model : 1366x768, CPU Centrino2 P8600 2.4GHz, nVidia 9600MGT 512Mo, DDR3 RAM 2GB, HDD 320GB, Windows Vista Ultimate 64Bits:
PERFORMANCES OF 9600M GT
GPU-Z:
3D MARK 06 Score at native resolution 1366x768 is 5690
3D MARK 06 Score at resolution 1024x768 is 6390
Cinebench 10 score is 5472.
I'm not so much into gaming, but I like games like Left 4 Dead and I was able to play it with this 9600M GT with nice graphics and anti-aliasing (2x).
NEW 12-01-2009 COD 5 Bench
I've made a bench of COD5 and that was quite good. I've let all the default settings but use native resolution (1366x768) Vertical Sync and AA2x. I've used FRAPS to get the frame rate and the average was around 30-35fps, the lower rates was about 18fps during multiple explosions close to 4 tanks. We still can get more fps by lowering the resolution to 1280x720, but I wanted to test with the native resolution................
One of the things that truly bugged me about this laptop was that it only shipped with 533MHz RAM (PC2-4200) when the hardware supported 667MHz (PC2-5300). When I started looking to upgrade I was bugged again that the 667MHz memory I was finding had a CAS Latency of 5 where the 533MHz ran at CL4. Then I finally located some 667MHz CL4 memory and decided to pull the trigger.
I am happy with the purchase and would recommend the upgrade to anyone with this laptop. I can't say if I used the best memory benchmarking program, but at the very least I can publish my results using SiSoftware Sandra Lite:
1) Memory Bandwidth test (HIGHER is better)
2) Memory Latency test (LOWER is better for both)
3) Cache & Memory test (HIGHER is better for Combined, LOWER is better for Speed factor)
PC4200 CL4 2x1GB (Original memory)
1) Memory bandwidth 3524 MB/s
2) Memory latency 138 ns, Speed factor 66.0
3) Cache & memory Combined index 9375 MB/s, Speed factor 14.2
PC5300 CL5 2x1GB (borrowed from a friend during the upgrade for reference)
1) Memory bandwidth 3588 MB/s
2) Memory latency 122 ns, Speed factor 63.7
3) Cache & memory Combined index 9645 MB/s, Speed factor 13.3
PC5300 CL4 2x1GB
1) Memory Bandwidth: 3663 MB/s
2) Memory Latency: 114 ns, Speed factor 55.2
3) Cache & Memory: Combined index 9910 MB/s, Speed factor 12.6.......
im planning on buying windows 7 ..
I am a proud owner of acer 7520G ,and my lappy started acting slowly after 1 year of horrible terror or windows vista...
I made those recovery cds , also i got that 10gb partition PQSERVICE...
This service works only when you got their vista+acer signed OS?
IF i install windows 7 will i be able to recover old vista via hidden partition or recovery dvds?
Will i be able to make recovery dvds and recovery partition on win 7 with acer tools?