I just bought a new Dell M1730 with 4 gigs of ram and the Intel Core 2 X9000 processor.
It has the 8800m SLI video card(s) in it. I installed Everest and it consistently says that the GPU temperature is running around 160 degrees F. I am *not* doing anything other than surfing the web and haven't been. Is this normal? The harddrive and cpu temperatures both seem fine. They are 91F and 90F respectively. Any ideas why the GPU would be so high especially since I'm not really doing anything (playing games for instance) that would push it to it's limits? I did buy a notebook cooler but it isn't here yet. It's sitting on a flat surface with decent airflow.
I'm just a little concerned as I don't want it to burn up.
I'm another one of those waiting for an 8800M GTX (Dell PN XM888) replacement...
Replacement was initiated by Dell in early September, was told backorder until September 21. On September 21, backorder was pushed to October 5...
I've made a bit of noise and I'm at the "Consumer Escalation" level, but I know there's the "Executive Escalation" level as well. At this point, I've got a Service Call number for a system replacement, but it's showing no activity....
I'm not a expert at OCing, not even an Amateur, But I can't seem to find a stable, clock. Also, I've been using RivaTuner v2.2 on XP SP2, and on Vista Ultimate x64 SP1.
Also, it doesn't help at all, If I'm running 610/905, it doesn't increase preference at all, it decreases it...
Any one know of tools to track down what is consuming space on a hard drive partition?
I am trying to provide remote support for my mother-in-law's Inspiron 8200. Last summer I put in a new HDD and maxed the RAM to get a couple more years out of it. I partitioned the drive into 10GB and 70GB. I installed Win XP home + all service packs and updates, prgrams etc. on C:.
I moved "My Documents" to the second partition, the drive letter ended up as E: for the second partition (optical drive is D. She only has about 3 GB of data so there should not be any issues.
She recently called saying that attempting to install TurboTax resulted in an insufficient disk space error. When I had her look into it, C: is almost full, 9.5GB used. This seems unreasonable to me. I have a couple of other laptops configured similarly and the OS and programs only take about 6.5GB. This lady is not one to install lots of stuff.
My daughter is there visiting so I had her read me the space taken by each folder in the C: partition. Adding up the numbers it seems that there is at least a couple of gig unaccounted for. Do I have to actually go into every folder to find any space hogs? Nothing I heard so far seems unreasonably large.
I am suspecting some kind of bug or spyware is creating a file that is consuming the space on C:. I had a problem with Zone Alarm 9 creating a ridiculous log file on one of my boxes but she is not running ZA.
E: has plenty of space only the 3GB of data in My Docs.
Currently I have 2 PC's, a quadcore desktop for recording with Pro Tools, and a 13.3' Asus laptop for school. After seeing a friend use Logic Pro 8, I think I want to make the switch, but I have a couple questions:
1. With Pro Tools, you are required to have 2 hard drives, is that necessary with Logic Pro 8?
2. Will Logic Pro record fine with a 5400rpm HD, or do I need to upgrade to 7200rpm? (I only record a couple tracks at a time)
3. I think Logic Pro 8 would run fine on a normal macbook, but it seems like there is no firewire port? So do I have to spend the extra $700 to get a MBP for a firewire port?
4. Any MBP models I should avoid? I've never even looked into buying a mac before, so this is all new to me...ohh and yes I need a laptop and not a imac cause it needs to be portable since I will probably be selling both PC's...
what tools can we use for benchmarking Apple/mac systems?
So far OpenMark is pretty much dead. I use XBench at the moment, but the result presentation is very much in text mode. Would be nice if we have something like Passmark Performance test tool of Windows.
I am trying to replace my laptop fan in a Sony Vaio VGN-S270. I removed all the necessary screws and plugs to get to the fan, but there are three screws connecting the fan which I'm not sure how to remove. Two of them are located on the lower left of the fan and are gold in color. They appear to be spring-loaded and have a threaded center to the screw. This seems to be an extension of the fan itself and covers one of the chips.
The other screw is very small and is located up and to the left of the actual fan portion. This screw looks to have a circular head to it, but its so small I can't really tell what type of tool to use for it.
i've installed kubuntu and when i click install parallels tools from the menu, the cd rom drive gets mounted but i cannot double click on the installer. i googled and i saw that i should go in terminal and type cd/media/cdrom. that didnt work as it said cannot locate folder or directory?
Just got me an Aspire 5536G (2.2 ghz Turion, ATI 4570) and it is running hot! After a few minutes of Prime95 the CPU gets up in the 90s (Celcius), and 15-20 minutes of gaming gets it there too.
Is there a tool that lets me undervolt and lower clocks? The BIOS is very anemic, so I cant set things there.
I am also looking for a good fan speed and temp monitoring program. I have tried a few but only CPUID HWMonitor reports temps for both cores and two more sensors (presumably located near the GPU). SpeedFan only reports one temperatur.
Last couple days, I have been getting the error msg: " HP TOOLS Drive E: running out of space... " then something about pls CLICK here to find out the free up some space... I click and the only thing listed is the RECYCLE BINĀ which is empty...
I may take them apart and do AS5 but I dont think it will make a difference. I took some pictures and I will post them in a bit but I am having problems. I was able to enable SLI and I ran 3DMark06 and I got 9937 so I went to overclock my video card and RivaTuner gave me some prompt that it has not been tested with my drivers and and would not run properly. Once in Rivatuner I noticed I am not able to overclock my vid card or anything. So I tried to reinstall rivatuner and nothing. Then I uninstalled my videocard 171.16 drivers and ran drivecleaner, reinstalled my drivers and same thing. I even tried the new 174.12 from laptopvideo2go and still nothing.
I just recently bought a 8800m gtx card with part number xm888 for my m1730 to replace the 8700m sli card that came with it.
My question is whether my 8800m gtx card is sli or not. With the 8700m, when i check my display properties it tells me it has a total of 512mb memory, which makes sense since it is two 256mb cards. But when i do the same thing for the 8800m card it tells me i have 512mb video memory. Does this mean my card is single and not sli? Or is my card two 256mb cards?
Correct me if i am wrong, i read some old threads and people who got the same 8800m card with part number xm8800 said it was a sli card with 1gb memory. Physically, the 8800m i have looks exactly like the 8800m sli cards that have been displayed all over the forum.
On Vista, if I want to scan something I simply go to Windows Fax & Scan, and literally press select the scan i want and press scan.
Can OSX Leopard do this? Cheers
Today's the day I was planning to go to Apple.com and buy a new Macbook pro, and i'm having a few small worries. The cost, the fact that it's my first Mac ever, what if I hate it despite enjoying it when I went to the store to check one out for real etc....
there are so many people with a dead 8800m gtx. Mine died a week back. Technician came yesterday.. replaced motherboard to see if it made things alright..It didnt. Now they are telling me that I will have to wait another week for the replacement parts which (is supposed) to be arriving a week later from Malaysia. (BTW I am from India.) If anybody here would be to let me know if 8800m are actually being replaced or not (especially in Asia)?
I have read many posts in this forum with most people from the USA and few in Europe having their M1730 being replaced with AW m17x. Any idea on whats the scenario in Asia?
What should I expect from dell a week from now? Any chances that I could actually get a 8800m replacement as I was told?
If they tell me to wait for, say a week or two more, do I have any other option but to wait? I asked them to provide me a temporary laptop replacement till the issue was fixed, but they said they dont have such facilities.
Crysis UpDated: (F'n vista caused the setting not to save right) The following benchmarks where done using Crysis benchmark util I found over at guru3d.
2/13/2008 10:32:44 AM - Vista Beginning Run #1 on Map-island, Demo-benchmark_gpu DX10 1900x1200, AA=No AA, Vsync=Disabled, 32 bit test, FullScreen Demo Loops=3, Time Of Day= 9 Global Game Quality: VeryHigh ============================================================== TimeDemo Play Started , (Total Frames: 2000, Recorded Time: 111.86s) !TimeDemo Run 0 Finished. Play Time: 186.87s, Average FPS: 10.70 Min FPS: 4.27 at frame 90, Max FPS: 22.58 at frame 1189 Average Tri/Sec: -9011310, Tri/Frame: -841973 Recorded/Played Tris ratio: -1.09 !TimeDemo Run 1 Finished. Play Time: 144.52s, Average FPS: 13.84 Min FPS: 4.27 at frame 90, Max FPS: 22.58 at frame 1189 Average Tri/Sec: -11535945, Tri/Frame: -833573 Recorded/Played Tris ratio: -1.10 !TimeDemo Run 2 Finished. Play Time: 140.40s, Average FPS: 14.24 Min FPS: 4.27 at frame 90, Max FPS: 22.58 at frame 1189 Average Tri/Sec: -11881713, Tri/Frame: -834120 Recorded/Played Tris ratio: -1.10 TimeDemo Play Ended, (3 Runs Performed)...
When this card comes out at the end of the year, will it get the same 3dmarks scores and fps in old/new games as the desktop version or will it be a little faster then the 8700m? I hope its going to be same as the desktop version.
I get an average fps of 31 using DX9 Very High Cvars along with a Very High config, this running in DX9 in Vista with 8800m GTX overclocked to 625/1500/950 and this at 1920x1200 native res on my XPS M1730 ...
All my systems in my sig have replaced GPU's in a less than a year.
Is this what I get for trying to get a performance GPU's?
Kind of ennoying because I hate the tech's to come to my place and rape my system - I'm not saying all techs do, but I only had one guy who was really careful w/ my system when he was replacing parts. Others just didn't give a damn, which even lead to replacing my M1330.
I caught him when some plastic part from mobo flew off my system, and when he closed the system up, the system refused to boot up lol.
my XPS gen 1 w/ ATI still runs okay at my mom's place.
Anybody else wondering why we haven't seen anything coming out with the 8800m Nvidia cards?
Alienware had their big product release 11/19/07 for their new laptops with the 8800m cards then they pulled the link from their website.
Dell, who usually has the newest stuff doesn't mention them.
The boutique vendors like Voodoo pc and Falcon-nw that pride themselves on offering the latest hardware don't offer them. No press reviews in the print.
I've seen one on line mini review of bench marks from a clevo type laptop with an 8800m video card and that is it.
I wonder if nvidia is having a harder time manufacturing the 8800 62 nM cards than they have admitted. It would explain why the standard 8800 video cards are hard to get as well
I have read in other forums that you can put the 9800m GT BIOS on a 8800m GTX card on some systems. I want to do this because I am experiencing the yellow screen problem and dell did not release a fix for all cards. I have a dell xps m1730.