After considering the sxps 16 I am just about to order a 1530 but am not sure what is the best screen option here in the UK (UK does not offer LED). These are my options:
15.4" Widescreen™ WXGA (1280x800) TFT Display (220nits) with TrueLife™ [Included in Price]15.4" UltraSharp™ Widescreen WSXGA+ (1680x1050) TFT Display with TrueLife™ [add £90.00 or £3/month1]15.4" Widescreen WUXGA (1920x1200) TFT Display with TrueLife™ [add £130.00 or £4/month1]
I will be using the laptop for design and occasional video editing & games.
I think the 1920*1200 will cause eye strain but what do you guys think?
I am considering purchasing an XPS 1530 for both gaming and business use/travel and am having a hard time deciding which screen to purchase? I do play various simulation games and know that the 8600gt gpu is a low/mid level card that would run games and look better at lower native screen resolutions (if not now, then within the next year or two.) I am planning to keep this computer for about 3-4 years. On the other hand, I do like having more information fit unto a screen for web browsing and general typing work.
Should I go with the 1440x900 LCD/LED screen or stay with the lower 1280x800 screen?
I bought my XPS1530 about a year ago. I am impressed with it, i hadnt used a laptop before and now i have tried a few different ones i have decided that the 1280x800 screen could be improved to a bigger resolution.
Is it possible to just change the display to a bigger one? or do i need other bits and pieces? The mobo was replaced last week due to a glitchy gfx issue .....
There are some great prices on 1530s in the outlet. I`m thinking this might be a good time to pick 1 up.
My question is: since these are computers that are already built, can you find out which screen manufacturer you`re getting when you order? I`d love to know I`m getting an LG.
I recently lost the option to change the screen orientation on my HP Pavilion Dv7-6135dx running Windows 7 Home Premium 64-bit.  Upgrading and downgrading the drivers for my video cards has no effect.  I have even updated my BIOS, and used a restore point to no avail.
Just over a week ago there there was an option for WXGA+ display (1440x900) WLED. I was on the verge of buying but I held out for a coupon which I got next day. Problem was the next day the WXGA+ was no longer an option.
I am left with the choice of base WXGA WLED (1280 x 800), the CCFL version of that or WUXGA+ CCFL (1920x1200) @ £100 more. That is too high for me (resolution & maybe price). I really wanted the WXGA+ WLED and am pissed off it has gone
Anyone with knowledge of how dell works have any ideas why they would not be offering it any more or any ideas if it might come back?
Is this the same technology and amazing screen as the XPS Studio 16? Anyone have this screen care to comment? I'm looking for a very bright and high quality screen and the Studio 17 seems like a perfect replacement for my Asus W2V.
I am purchasing a dell m4400 and want to know what is the "intel vpro" option. After a little googling and searching these forums I understand it allows an IT dept to troubleshoot problems remotely.
Now I dont have an IT dept (with the exception of myself) so does anyone know if this option would allow a dell take control (from there side) and fix any software problem I may have?
So far, the leather-trimmed Studio XPS notebook only comes in black. But that could change very soon.
Dell's designers are considering a red (or according to them, "Bordeaux") plastic/leather lid combo, pictured here. It is not, however, part of the (Product) Red line.
So after installing the new 185 drivers a couple of weeks ago, I turned on SLI, restarted, and forgot about it.
Now I just checked the nvidia panel and there is no option to turn on SLI. I went to device manager and only one 8800m gtx is listed there when there used to be 2... seems like the computer doesn't even see the second GPU.
tried reinstalling the drivers but still only one gpu is showing up...
I'm going to buy a Dell Latitude E6400 to replace my old TP T42. I only have a doubt about what HD option to choose.
I'm pretty interested in having a encrypted hard disk option (80GB 5400rpm Encrypted Hard Drive) but I don't really know how does it work. On my thinkpad notebook you can choose if you want the hard drive protected with a master password or not. You configure this in the BIOS.
Could anyone say me if on the Dell Latitude E Series notebooks it works in the same way? Or maybe the disk is encrypted by a windows software or anything? I'm worried about this because I'm going to use more than one OS in the notebook and if I'm going to pay for a encrypted hard drive I want it to be OS independent.
Where do you configure this feature? Also in the BIOS or maybe in a hard drive controller?
If the encrypted hard drive is more expensive than other options, I suppose that if I one day I change the disk for another, this one must has encrypted data support? I can't simply change it for any kind of notebook HD?
Anyone know what happened to this option? I remember speccing out a system a few months back and it was possible to upgrade the x3100 to geforce 8400, but its no longer there.
I'm looking at the Vostro 1720 and there is no option for a 64 bit verson of Windows 7 Home Premium. It comes with the 32 bit verson and I dont want to play $120 for the Windows 7 Ultimate 64 bit
How to switch off the splendid color option I do not like it. I have XPS15 laptop, tried to do it via windows mobile center but it doesn't work. It does not show the option for that.
I have no usb boot option and i cant seem to enable it no matter what i change.
Also the laptop has Linux on it that i cant seem to boot either,all i get after the format that i did at the partition that had windows is a syslinux blackscreen.
Let me note that i had the usb option pre-bios update.I updated bios because i could not install wifi and bluetooth drivers.
This is for me not really acceptable, we are almost in the year 2010 and i find it weird that there are still b/g cards sold....
I definitely dont want only b/g but i do want n (most of us around me now have 50+ Internet connections and i hope the have next year 60/6 or even higher)
I'm looking to get a notebook cooler for my E6400, as I am sure some other are considered or have taken advantage of. So, I want to find out one that is going to work the best.
I am considering the following:
- Zalman ZM-NC1000, said to be really quiet and effective. From what I gather blows air up at the notebook
- Antec notebook cooler, also supposed to be quite effective. This one I think sucks away the hot air from the notebook
Now the question is, what is going to be the better choice? I think the fan on the E6400/ E6500 blows hot air out of the notebook right? In which case the cooler that then helps in taking that away would be best?
*UPDATE* The design is on the inside aswell. See pictures below.
I just wanted to give everybody a headsup that may be thinking about purchasing a Dell laptop and choosing the black chainlink color.
A little backstory:
I'm starting college at the end of the month, and was looking at getting a laptop for my classes. I really liked the Studio 15, read quite a bit of reviews and finally built it all online and got it ordered.
What I DIDN'T know was that the color option, Black Chainlink, was actually a design .....
I have an XPS 12 that I have a question about. When my computer is plugged in the power option is set to High Performance. When I unplug it it goes to Power Saver. How do I get the power option to permanently be on High Performance?
I was given a nice E6510 that doesn't boot. I've taken it apart and tested the memory, all the connections, reseated the processor (yes I used arctic silver) and it never gets past the 'one time boot menu', the diagnostic boot freezes but I CAN get to the very complex BIOS version A16.
So, I bought a new MOBO thinking that would solve the boot issue but it hasn't-it's doing exactly the same thing. may indicate the problem-Dell calls this an "OPTION ROM", may be 'unseated' or the system board is bad.
What is "Option ROM" and how can it be reseated? Are there any other things I can do in BIOS to change this? I also replaced the SATA CDROM and the hard drive, and I know the USB port works okay but nothing will boot from them.
