Dell :: 1640: Future Upgrade To SSD
Mar 4, 2009This is a newb question: My 1640 now has a 7200RPM hard disk. Will I be able to replace/upgrade it in the future with SSD?
View 9 RepliesThis is a newb question: My 1640 now has a 7200RPM hard disk. Will I be able to replace/upgrade it in the future with SSD?
View 9 RepliesIf I buy a 2.8ghz macbookpro, will i be able to upgrade it in the future to 3.06ghz or higher from Apple or another place?
View 10 Replies View RelatedDo not upgrade... the upgrade killed my motherboard, I dont know what happened. I as installing it fine then it was totally unresponsive and would not shut off. I then had to take away the power supply and now Dell is coming to replace my motherboard.
View 10 Replies View RelatedThese are the "Rear Caps" on the Dell XPS1640:
Take a close look at the two pictures below. Showing two XPS1640's and their "Rear Cap" (ventilation). They are different. I drew a green line in approximately the same location. "v2" definitely has more ventilation slots towards the bottom. Looks like Dell has an upgrade policy going on regarding the early 1640's:
Is this an easy thing to do?
I managed to find this drive on ebay:
http://cgi.ebay.co.uk/Dell-studio-XP...item5ad188bfc0
Is this the only drive thats confirmed to work?
So I tried updating my BIOS to version A14, the current one on Dell's site. Running Windows 7 Ultimate 64, btw. It seemed to update fine, but when it restarted, I got a black screen.
I waited about 20 minutes, powered off, then back on. It booted into Windows, now however my keyboard does not work. Most keys do not work, and the ones that do produce incorrect characters.
Also, whenever I restart Windows, it does not reboot. It will hang at a black screen until I power off and back on. Currently typing this on a USB keyboard.
When I go into setup, it does say version A14, so I'm assuming it went through, but for some reason is not compatible with my system. Can I downgrade to fix this, and if so, where can I find an older BIOS version?
For those of you that have a 1640 and have upgraded from Vista to 7, how long did the install take you? And my second question is...did you run into any complications with the upgrade process that I should be aware of before I start it on my wife's laptop?
View 10 Replies View RelatedI currently have an ASUS G50V-A2 and am looking to sell it to get a new Dell XPS 1640 with the new graphics chipset.
I have only had the ASUS since last October, but I am always wanting a new laptop every 6 - 12 months and this Dell has caught my eye.
Looking at the specs they are similiar, but the Dell does have a few upgrades to what I have:
2.66GHz processor (Asus - 2.53)
Vista Upgrade to Windows 7 (Asus - no upgrade)
1920x1080 (Asus - 1680x1050)
ATI 4760 (Asus - Geforce 9700GT) .....
I am planning on buying a laptop for college in late june/ early july. The notebook I've had my eye on is the dell studio xps 16 (specs below):
Intel T9550 (2.6 Ghz, 6 MB Cache)
4 GB 1066MHz RAM
500 GB (7,200 RM) SATA - or - 256GB SSD
ATI Mobility Radeon HD 3670 (512MB)
FullHD RGBLED LCD 1920x1080 Screen
BluRay Drive
Intel 5300 WLAN Wireless-N (3x3) Mini Card
Additional 9-Cell Battery
ExpressCard Sound Blaster X-Fi Xtreme Audio Sound Card
Dell Wireless 370 Bluetooth Module (2.1+EDR)
Now, will there be any developments or changes during the time between now and when I plan to buy the laptop? also, any thoughts on 500GB 7,200 RM vs. 256 GB SSD... I'll have the money for the SSD, but I'm not sure if the cost/benefit of getting it is worth it.
But mainly, I'd like to know some insight about the future of the system (ie. price-drops, upgraded parts, et cetera)
I'm in the market for a new laptop; either the Studio 15 or the Studio XPS16. I'm still chuggin along on my Dell Inspiron 600m from 2003! Anyway,
it came with a copy of Windows XP, so I could do a clean OS install anytime I wanted.
Does Dell still do this? I'm waiting for Win7 to come out on Oct 22, and I basically want to have a clean install of the retail OS on my new computer.
I want to purchase the dell studio 14z but am looking to get the best price possible.
Do you think if I wait dell would most likely have a back to school sale for the 14z as it is marketed towards students?
Right now I can get 170 dollars off (E-value and EPP). Should I wait or bite the bullet?
I'm curious about a few things. What would you rather have for now? at simliar specs? IE 256 Mb cards of each.
Currently th M1710 is the only laptop at 17" that has DVI support. One thing though, when the XPS is replaced by the new model, it will be based on the current 1720 right? So in other words the new XPS will not have DVI? Are there any threads or information speculating on the new XPS?
Oh and one other thing. Whats a good multiplayer game? I like call of duty 2 but have been out of the game scene for a while.
Just came across this tidbit of information...
[url]
Do you think that the new m1730s already have that inside?
Onlive Gaming Service GDC 09
read that thread in the gaming forums
Quote:
The service works with pretty much any Windows or Mac machine as a small browser plug-in. Optionally, you will also be able to purchase a small device, called the OnLive MicroConsole, that you can hook directly into your TV via HDMI, though if your computer supports video output to your TV, you can just do it that way instead. Of course, you can also just play on your computer's display if you don't want to pipe it out to your living room set.
loots of potential in this. I might just need to upgrade to 17" MBP for this in the future.
Just wondering if there's any idea how long the bubbly Espresso imprint design will continue? Still deciding whether to pull the trigger on a laptop now though I don't like the finish (DV5t imprint was the best!) or wait for the next refresh, whenever that may be....
Am I the only one that thinks it's a little too cute for a laptop? It's not like a drive a VW bug w/the daisy hubcaps or anything
Is there any word on possibly upgrading the Vaio F series GPU to something better than the 330M in the future? It is the only thing stopping me from getting a Vaio F , since it won't be too great for gaming.
View 10 Replies View RelatedSZ 750 NC.
I wanna create some partition on it ... how can i do that as when i wanna reinstall the recovery on it in the future , the created drives I've made don't change in default factory form ? can I use this software : paragon hard disk manager 2008, if i use this software , will the partition be remained on my laptop when i use recovery DVD ?
I had the HDX16 on my shortlist for a new laptop but in all of the recent announcements by HP on refreshed Pavilions and new Envy laptops, the HDX has been conspicuous by it's absence. No information at all and I can still only see it available in Win Vista format from retailers, not Win 7. what the future holds for HDX? It looks like a good choice for a general multimedia laptop. Any refresh or updates planned? Or are HP likely to discontinue it?
View 3 Replies View RelatedI own an HDX16T. Day 1, I burnt RECOVERY DISKS and then I proceeded with a clean install with a new vista install.
I decided to try to restore the notebook with those recovery disks. Guess what? It appears that you can no longer use those disks without having the original HP RECOVERY PARTITION?
I just simply can't use it anymore. I can't restore my notebook to factory condition anymore. The only option I have is to Click "FINISH" and reboot.
I'm thinking about snagging a copy of iWork 2009 because, well, I don't like Office 2008 even though I paid a marginal price for the suite as available from my medical school. I realize that Office 2011 is coming within the next seven months or so, but until then...
I haven't been able to find a thing out about iWork 2010, so I'm assuming I'd just spring for the '09 version. In experimenting with the trial, I've noticed that even a simple import of a text-only .docx is formatted differently; it seems like the line spacing is different, because in the imported .pages that Pages makes from the source .docx I made, there are two additional lines of text on the first page. Why is this?
My big thing is that all created works must be easily taken to a different platform; I like OS X, but I have no allegiance to it or to Apple, and if a solid competitor to the 15" MBP comes along, I would seriously consider switching back to Windows 7. I rarely need to share .doc/.docx (or any other Office suite) files with others for their own editing, so PDF exports would suffice most of the time.
I know that .pages files are essentially archives containing XML data and a .pdf of the document, but I'd hate to have to hand-convert a bunch of XMLs if I did switch back. And sadly, Pages doesn't natively save to a .doc/.docx -- it only exports (though I did read about a hack to change that some time ago). Formatting mismatches for something as minor as line spacing are just concerning.
Does anybody know if Acer build an new Ferrari NB in the future?
View 6 Replies View RelatedI have an aging M1210 with 2 gigs of ran, a OCZ SSD & the C2D 2ghz T7200 processor.
I wasnt really planning on an upgrade but the pricing looks pretty good.
I am not sure if its worth it though. My M1210 with SSD is amazing.
I just dont know if going from a 2.0 T7200 to a 2.66 T9550 is worth it or if i should wait longer for an I7 system in this size?
I should be getting my upgrade (Pro 64) within the next week and was wondering which method is better. I obviously know that it will run a bit faster for the first month or so with clean install, however, my concern is with the activation of the dell free upgrade version. Will it simply be boot the free upgrade disk and install and it will be activated fine? Or, is there more to it? Also, say a year from now I wanted reformat/reinstall win 7... How would I go about doing that with the dell free upgrade DVD?
View 10 Replies View RelatedAnyone do it yet? I read that someone run linux, so am assuming XP can be done...I am game for trying if someone can just point me in the right direction...Will the webcam, face recognition etc work?
EDIT: Before people start flaming me, I have gone through the 1640 owners thread as much as I could.. thing just keeps getting fatter by the minute...
I was watching something on youtube when I noticed a small dust-like spot/dot on the screen and i tried cleaning it off but it wouldn't go away. It looks to be inside the screen (if that makes any sense) and is evident when there is a black background/or when the comp is off. So my question to you is
1) what am i looking at?
2) Can i get rid of it?
3) Do other people here a have similar issue?
Does the 1640 play GTA IV well? In the official owners forum (1640 w/4650) somebody said its very sluggish but from youtube vids it appeared to play it very well. Can anyone confirm that it plays well at a modest resolution (WXGA)
View 3 Replies View RelatedWith all the hand wringing folks have been doing about the lack of drivers for a clean install of Win7 I thought I'd jump in to the deep end of the pool with my FZ190 and investigate an alternative. My good friends Rajesh and Dr. Pratik have done clean installs of Win7 on FZ models, but I decided to take a different approach... the "dreaded" OS in place upgrade. Partly out of curiosity, I wanted to see if it would work, but mainly because I have a ton of software that would need to be reinstalled, if I did a clean install. That would mean days or weeks of inventorying every thing I have installed, digging up installation media and then installing all the stuff. I just don't have the spare time. So...
This past weekend I imaged my C: drive (all my data and I mean ALL my data is on D:, I am a fanatic about that). MAKE SURE YOU HAVE A BACKUP OF YOUR C: DRIVE BEFORE YOU TRY AN UPGRADE! I ran the Windows 7 Update adviser and it said I had some issues:
Quote:
NVIDIA GeForce 8400M GT - NVIDIA Not compatible The driver installed for this device is not compatible with Windows 7....................
im new here just wanna ask about my new xps studio laptop..
i bought it with a 64bit vista OS, the problem is i cant install a cad software because its for 32bit..can i install my laptop with a 32 bit OS? would it be no problem regarding my drivers?
I know there is two partitions on my harddrive; one for everything (C and the other is recovery (D..
When I use my vista disc that it came with does it automatically do it for me or do I select which partition to reformat (or reformat both partitions)?
Then what do I do with the drivers disc? install during reformat or after?
I received my new XPS 1640 (2.1gHz, 4GB ram, 512mb vid, Vista 64bit) on Thurs. April 2nd.
Worked fine and dandy over the weekend, but then Monday the 6th I contacted Dell through their customer service feature and their rep took control of my computer trying to update the BIOS ....