What is a 7900GSX? It's a 7900GS with a GTX BIOS, correct? How do I flash a GTX BIOS to my card? I tried with the 790GTXUN.ROM found on the JLMOD CD, but no luck. I actually ended up BkSODing, so I had to blind-flash back to my GS BIOS. What would be the correct BIOS .rom file to use? Is there something special I need to do? By the way, my card is a Rev.1.
View 14 RepliesI have a 7900gs single pipe and I have had it overclocked for some time (probably a year or a little less) using joker's rom cd. I had it at a medium or so overclock however ...I think 430/600 or something like that so I wasnt really pushing the card too hard. Anyway, I was reading a page on the internet today and started noticing some artifacts and the screen would go blank and then come back on. I immediately turned it off and rebooted normally. I noticed even on all the boot screens it has artifacts and in DOS mode, you can barely read anything because random letters and stuff are everywhere. It will not boot normally but can still boot in safe mode and in VGA mode. I've tried putting it back at stock clocks, reinstalling the drivers, bios, chipset, basically everything but windows itself seeing as it shows artifacts even out of windows. When I try to run ATItool it says there is no video device detected but my device manager shows the 7900 gs running normally. Unfortunately... I have the feeling my card is fried...
View 15 Replies View RelatedSo, I buy a 7900 GS from a forum member (KSMB) who claims the card was barely used and he is selling it because he replaced the card with a 7900GTX.
I paid him his asking price via paypal and almost two weeks later the card arrives... DOA
Now, I own four (4) e1705's and three (3) M1710's and am very familiar with each of the machines and dissasemble them for regular maintenance cleaning. Bottom line is that dropping in a new video card is no chore for me .....
Is this switch worth it? Does the 7950 have better performance?
View 15 Replies View RelatedIt seems Junlu206 has the iso to unlock the 7900 GTX bios for overclocking.
Does anyone have it uploaded to a server or can they post a link tto maybe where it is?
I don't know what rev 1 or 0 I have but this is what my bios says
005.071.022.016.017.000 Is this Rev1 or Rev 0?
I am getting ready to pull the trigger on a 1710 within the next week or so. Yeah, I know the 1730 is coming out but I really can't wait much longer and besides, the 1730 is by far one of the biggest and ugliest models I have seen Dell come out with. Sorry for that little rant but anyway, back to the main question:
There is a $350 price difference between the 7900 GS and the 7950. I have searched the forums and found a couple of relavant threads but I wanted some people who own both of these models to readdress this issue and let me know if you like the model you have or do you wish you would have gone with a different GPU.
So a friend of mine has a Inspiron E1705 with a 7900 Go GTX. His original 7900 Go had a heatpipe failure so we picked up the GTX as a replacement.
Well, the other day, the GTX began to artifact like crazy and wouldn't run the drivers anymore at all. Seemed clear to me that we had a BGA solder joint failure.
So, I removed the card from the notebook and baked the damn thing at 425F for about 10 mins.
And now it works perfectly again. (dunno if it'll last, but hope so)
I have a Dell Inspiron E1705, Core 2 dou, 2 GB Ram, Very powerful laptop. I have an ATI Video card in it that I've been trying hard to upgrade to a Geforce. I bought 6 till with no luck at all, I bought all of them off ebay, the last one was a couple days ago, when I got it, I installed it and everything was working perfectly, I was so happy cuz this is the first one that actually works, after 1 hour of using it, red flickers started appearing on the screen, I restarted, tried different drivers, tried placing it again.. no luck at all . Now I have different colored lines and blinking pixels all over the screen, the background changes colors.. yellow, red, green.. and its not just on windows.. Bios, safe mode, everywhere.. I put my old ATI back and everything is working fine. I'm planning to send it back again to the seller, I attached some pics. I have a 90 w adapter but I dont think its a heating or power problems.
View 11 Replies View RelatedWhen I just had my XPS M1710 I flashed it with the "gsx" rom and stock gtx speeds...
Now I flashed my card with the unlocked roms (1,24V) but I think is running hotter now on the GS stock speeds...?
What should I do? I don't play games but I like the performance gain in windows Vista. I was thinking to flash my card again with the "oldfashion GSX rom"...
What would you do?
I just want to keep a cool system....
I'm thinking about buying a Dell 3007 30" monitor that support up to 2560x1600.
I have a M1710 with a 7900GS. Will the card support 2560x1600 ?
I bought a 7900 for my dell e1705. When i installed it, there was no screen, but the monitor turned on. I pu tthe 7800 back in and it worked. I dont know what I did wrong, please tell me asap.
Bios are fully updated, A09 (i believe)
So there have been quite a few posts recently about the 8600GTvs7900GS debacle, so i thought Id post some benchmarks for everyone's viewing I used tomshardware.com to compare the GPU's. Ive come to find BF2142 is quite popular in these forums so this is a game i decided to use w/ the benchmarks. I wont say anything else, Ill let you decide on the performance difference between the two
Note- I realize real world performance/driver tweaking can have a great impact on things, these BM's are for your curiosity only
I am attempting to OC my Mobility 7900 GS.
The stock settings on the clock speeds in ntune are reported at 375/507.
I recently updated to the 180.something drivers from nvidia, the latest ones available, hearing the these new drivers in combination with RivaTuner 2.20 can now OC this card without having to flash the BIOS.
After installing new drivers, my RivaTuner would not allow me to change the settings... I would change the 2 clock speeds on core and memory, then press apply, and ok - then they would just go back to the default settings immediately.
i have dell e1705 1,8 dual core 2 gb ram it its possible to swop 7900 gs go with 6800 ultra go? ,to XPS m1710? (bios flashed) right now i have 7400pts on 3dmark05 , when i play gpu of 7900 its to hot like 80C:/ i tray instal new drivers but i have error....i tray use fan non stop but work just sometimes:/
View 10 Replies View RelatedI have a dell inspiron e1705 with a nvidia geforce go 7900 gs gpu installed. I was playing call of duty 4 on saturday and just after 5 mins of game play blue lines go across the screen and the screen goes black. The audio was still playing. I manually shut down the comp and restarted. When the dell screen came up after restarting orange and blue lines were visible. I could see the Microsoft loading bar but after that disappeared the screen went black and I could not log into windows. I downloaded the latest driver from nvidia, installed it, and restarted, but the same thing happened, Microsoft loading bar and then black screen. After about a minute of the black screen, a blue screen pops and says windows is shutting down form a hardware error to prevent damage and it also says something about a failure of the display driver.
Anyway, heres all the things I did so far to try to fix my problem;
-did a system restore to 2 days ago which didn't solve the problem.
-ran a memory diagnostics test and passed..
-ran a scan disk, no problems.
-uninstalled the video card and reinstalled with the latest driver which still did nothing.
I haven't put in my 7950 gtx yet because when I threw the one in that I had here it was DOA so I had to send back to the seller to replace, so the new one should be here in a week. Anyways here is the deal . .
Everyone is claiming since the 7900 GSX pulls such great scores in 3dmark05 (simular to the 7950) it is about the same. Here is the difference. When yall run 3dmark it defaults to a low resolution test. So here is an example. Im pulling low 9k with my 7900 GSX at default resolution. So I got a full version serial number for 3dmark05 and switched the resolution to 1440x900 and ran the tests with that. This should really show the memory difference and power of the better card.
The 7900GSX pulled 4262 at that resolution.
From what im finding online the 7950GTX at 1440x900 resolution pulls around 6700 at that resolution . If you have a 7950GTX test it out and post that instead.
Im sure at 1920x1200 resolution the differences would become even more apparant. So there is the final answer.
High resolution gaming (native resolution on our lappys) will show a big difference.
I am in the process of overclocking my card (thanks to the help of my brother and this website) and I am wondering what exactly is a good number to go by for these cards? I am currently at 510/540 and am having no problems but im paranoid and dont want to mess anything up, that being said I would like to get the best/safest "bang" I can out of this card...
Also, is their a program for Vista that allows you to permanetly keep these settings, I cant find such a thing on AtiTool...
I change my old Geforce 7900 gs from my INSPIRON 9400 for one Geforce Quadro 1600M, need change my adapter PA-10 for other highter like PA-13 or PA-15 ?
Some times my windows Vista Businnes freze whiti Q 1600M + PA-10 ...
however im having problems taking the screen apart.
i disconnected the video cable that connects to the screen however there is another cable connected on the right side. and i cant seem to find the spot to disconnect it.
I bought my XPS 1710 dell laptop about 2 yrs and some months ago at about ~$4, 150. About 3 weeks ago my GeForce go 7900 GTX died... I've never OC'd any device on my laptop and its been used in normal conditions..
Has anyone else had any problems with their GeForce go 7 series video cards?
did a clean install of Windows XP and this is what I get...
1. when my laptop boots up the bios screen comes up with a bunch of vertical lines...
2. when windows boots up there is a bunch of vertical lines...
3. simple vga mode works... no vertical lines...
4. when I try to install the drivers for the 7900 GTX I get a BSOD...
Warranty...
So far the video card has been backordered twice... when I get called again
and if its for the same reason I'm going to ask what the next course of action will be...
I doubt there are any remaing Geforce Go 7 series video cards...
Is it normal that dell.ca would have fewer choices of screens than dell.com? I'm looking at the studio 15, and dell.com lists Hi Resolution/Bright,
glossy widescreen 15.4 WLED display (1440x900) as a choice, which is what I want, but dell.ca doesn't. When I view the system specs though, that choice is listed as on option.
I have a Dell Latitude E6530 and when I plugged in my monitor and keyboard into the docking station, they were not recognized. But I can plug them into the laptop while docked and they are recognized.
View 1 Replies View RelatedI have a Dell Inspiron N5010 purchased about 2 and a half years ago. I was just deleting some random programs which I don't ever use, and accidentally clicked on uninstall Dell Data Safe Local Back up.
How to reinstall it? I tried to do so by clicking this link [URL] .... but it just came up with an error message.
my laptop vostro 3460 won't boot any more. When I turn it on it loads the Dell logo (I suppose it passes the POST) but then it just shows a black page. It could be anything, but I guess that it may have something to do with Windows 8 and the UEFI system. I also would be quite happy to install linux mint and get rid of Windows, but I don't know how to change the boot priority order.
So my questions are:
1 is it a hardware issue ? if not, can I solve my problem easily ?
2 how can I change the boot priority order, to install mint ?
I am looking for xp driver for Dell Wireless WLAN 1397 Half MiniCard (4312bg) (boradcom).
View 3 Replies View RelatedDell Inspiron 1545 with Vista
Slow keyboard response, letters don't keep up with my typing.
Can a dell lcd screen work in non-dell laptops, or do they use a non-standard connection?
View 3 Replies View Relatedwhen i first got my dell inspiron and it was all good. when i set the monitor to shut off after 1 minute of being idle, it did and would not turn on unless someone moved the mouse of pressed a button. however, after i reformatted, the computer monitor would shut off after 1 min but soon afterwards it turns on again by itself, then it goes off again, then it remains on permanently. i recently formatted my laptop again and this problem persists. anyone knows whats sup? im using xp ftw... and my configurations are the same as it was before the reformats so idk whats wrong.
View 9 Replies View Relatedi have just installed dells quickset, someone who have try it before ? (did you like it better then XP energy scheduler)
someone know if "allways on" is the same as (dells) "maxium performance" ?
im wondering if (maybe) Dell quickset gives me little longer battery time then XP scheduler. (maxium battery VS battery (XP)
Why can"t I get the Dell Webcam Central to load on my inspiron 1545? I have downloaded it twice from the support site for my service tag and each time i attempt t install it and it shows a coorupt or incomplete download
View 1 Replies View Related