Dell :: Fully Loaded M6300 Vs M1730
May 29, 2008
I'm looking to buy one of these machines to replace my 2 year old M90 (which I upgraded to full spec, 2500fx, 4gb, fastest available fitting processor).
Essentially both machines have X9000, 4gb RAM, 8xDVD. The 6300 has 200gb HD, and a 512mb 3600fx card, the 1730 has 2x160gb and dual sli 8800gtx. The M6300 is about £100 less ($200).
I'm struggling to decide :- I love the screen and design of my M90 (the glossy screen on the M1730 looks nasty to me), but I'd imagine the 1730 would outperform the M6300 quite substantially (although my M90 actually drew with if not beat its XPS sibling on several games). The M90 was also built fantastically well....I'm not sure about the 1730 never having seen one.
View 15 Replies
ADVERTISEMENT
Jul 23, 2008
I'm not looking to debate the geforce vs quadro performance nor do I want people to tell me to wait for the 9m series cards, just a couple quick questions.
Does the m1730 have a docking port? From what I can find, I'm thinking it does not. For that matter, does the m6300 have one? I think it does...
Can an 8800gtx from an m1730 be put into an m6300? If not, I'll be fine with the 3600m, but I prefer geforce cards.
If yes, where can you get an 8800gtx and how much do they cost? I've seen people saying anything from over $2000 to $700.... which is quite a difference.
I guess while I'm at it, are there any other huge issues that I've maybe overlooked? I'm thinking about things like the huge LCD problems that everyone experienced with light leakage and whatnot on the m170/9300 series and even overflowing into the next gen stuff iirc.
View 10 Replies
View Related
May 26, 2009
I have the chance to buy a Dell XPS M1730 from someone, they have given me the service tag and it says it was shipped on the 07/05/2009 and the warranty runs until 06/05/2010.
If i bought this laptop would the warranty be fully transferable to me, is it straight forward to change over a warranty with Dell ?
View 4 Replies
View Related
Sep 30, 2009
I'm another one of those waiting for an 8800M GTX (Dell PN XM888) replacement...
Replacement was initiated by Dell in early September, was told backorder until September 21. On September 21, backorder was pushed to October 5...
I've made a bit of noise and I'm at the "Consumer Escalation" level, but I know there's the "Executive Escalation" level as well. At this point, I've got a Service Call number for a system replacement, but it's showing no activity....
View 15 Replies
View Related
Feb 4, 2015
This morning, i turned my laptop on, and i went to go onto facebook, but i cam into a problem. My wifi wasnt working. I searched around for a solution but couldnt find one. I found the problem though, [URL] .... there is a link to the problem. it seems that the problem is that the broadcom 802.11ac network adapter's drivers cannot be loaded.Â
I did a recovery from the 30th of january, when it was working, i reinstalled the drivers multiple times.Â
View 1 Replies
View Related
Apr 7, 2013
Loaded an HP 4500 printer on my 1525 and now I can't get it to boot...I am in an endless circle of Startup Repair messages that can't fix the problem. How to get my system up and running.
View 2 Replies
View Related
Jan 2, 2009
After spending a great deal of time reading through various forums I've arrived here in hopes of getting Fallout 3 to run properly on my M6300.
Whenever run the game it seems to wind up having many graphic bugs (improper texture mapping etc.).
I believe the issue lies with the fact that the M6300 uses a Quadro card which isn't optimized for game playing--though I would appreciate it if I could play the game on any level, albeit the lowest possible settings.
View 3 Replies
View Related
Sep 6, 2009
i have M1710 and i have question about replacement of MB and Graphic card will MB and graphic card from M6300 fit into M1710 chasis? and will it work if i will replace only those two components?
View 11 Replies
View Related
Jun 11, 2008
I'm just selling my Inspiron 9400 on eBay and considering to buy a M6300 instead.
It seems to be a powerful Laptop and a worthy upgrade.
1. Is it worth to buy 3 GB of RAM instead of 2 GB? I mean, is there ANY performance boost (for gaming)? Or will upcoming titles be probable of making use of more than 2 GB? I will be using Win XP btw...
2. Is the C2D T8300 (2.4GHz,3MB L2 Cache, 800MHz FSB) a good choice? Or is the T9300 (2.5GHz) THAT much better (in terms of gaming performance)?
3. Is the 1440x900 non-glossy screen any good? Maybe some comparison to the one I used before (sharp/1920x1200/glossy)?
4. My set of choice will cost around 1550 euro (without the VAT Tax) and be something like:
- T8300 (2,4 GHz)
- FX 3600
- 200 GB HDD (7200 rpm)
- 1440x900 non-glossy
- 3 years guarantee
Is there any 15"/17" laptop from dell with a similar graphic performance at a similar (or cheaper) price?
5. Is it really worth to pay the 350 euro more to get the fx 3600 instead of the fx 1600?
View 15 Replies
View Related
Feb 13, 2008
As far as I can see it the only option with the possibility of docking and decent graphics performance are the m90/m6300 (regardless of manufacture). Has anyone heard news of a 8800 equivalent card for the m6300? I am duo to replace my m90 and believe the docking to be very convenient. Why doesn't the 5793 or m15x come with a docking option!
View 15 Replies
View Related
Jul 20, 2008
i recently saw some cheap mobile penrynn processors on ebay.
so i think about upgrading my cpu in the future (they get cheaper
from day to day) .
but i have the following questions before further considering that:
1. does changing the cpu on your own void your dell warranty in any way?
2. is it difficult to change it (never opened my laptop before)?
3. can i use ALL of the processors listed on the bottom of this post?
(as the x9000 has 44 watt instead of the others' 35 watt)
4. is it just plug & play /stick the new cpu inside and it works?
here the available processor models:
X90002.8 GHz 6MB44 Watt
T95002.6 GHz 6MB35 Watt
T93002.5 GHz 6MB35 Watt
T83002.4 GHz 3MB35 Watt
T81002.1 GHz 3MB35 Watt
View 10 Replies
View Related
Apr 30, 2012
I have Dell Studio 1537 laptop which is out of warranty. I decided to upgrade my CPU from T5800 to T7500.
When I started laptop after upgrade a message appear: "no microcode update loaded for booting processor" and I have 2 choices (press F1 to continue and press F2 to enter BIOS).
When I press F1 laptop loads and works. The only problem I see now is that CapsLock and NumLk lights does not appear when I press the buttons.
View 12 Replies
View Related
Oct 2, 2008
I have installed a FX 2500M (rev A02) on a M6300 system board A10 Bios, the card is working but its clock is fixed to 100MHz (100MHz core + 100MHz mem).
FX 2500m doesn't switch to 3D Low mode (200/300) or 3D Performance mode (500/600).
It always remains on 2D Mode (100/100)
Off Course the same card works correctly on M90 System Board.
I have tried many drivers, DELL version and generic version by laptopvideo2go, but same results (always fixed to 100MHz).
I have tried Rivatuner to force clock switch. Same results No Switch
I have even installed a new OS (Vista 64) and with it, I have a strange situation.
With Vista64 (no SP1) original driver supplied by MS (and based, I suppose, on forceware 96.xx) the card seems to works at high clock.
No information tools can be used (with MS Driver) so I can't see which clock are active but 3D performance (games and benchmark) are near the performance achieved with M90.
But once I update the driver by installing a recent version supplied by Nvidia (Dell version or generic is the same), the card blocks to 100MHz even under Vista64.
Unfortunately with MS Driver there are many graphics error and it isn't so usable with 3D application (i.e. games) and furthermore I want to use the card with XP32 (Vista64 has been installed only for tests).
View 10 Replies
View Related
Apr 2, 2010
Well i can usually fix my laptop problems but this one has me very surprised and i wanted to ask for opinions before doing somehting drastic (like changing the screen)
But alf m laptop screen goes dim, if this were the only thing the anwser would be obvious (broken screen change it) but the thing fixes when it goes into battery and slowly comes back when its conected again
I has virtually the same brightness on battery mode than on conected mode so the only real thing conecting her does its dimming alf the screen.
Why would it work while on battery and not conected? and why only alf screen?
View 5 Replies
View Related
Jul 2, 2009
hi there i have 4gb ocz pc6300 800mhz ram installed in my m6300 but the bios shows me that the ram is running @ 667MHZ. how can i change it
View 3 Replies
View Related
Jul 22, 2008
OC the GPU as follows
650 - 921 - 1625
3DMark06 result 10,277.
Submitted to NBF Benchmarks
View 13 Replies
View Related
Oct 1, 2009
Like what the title says ive been googling it and can't find anything about it if the x9000 is to be able to be overclocked on the m6300. Anyone care to provide some insight
View 4 Replies
View Related
May 14, 2014
My notebook Model is dv4-2020ca, Product : VM299UA#ABCÂ is operating by Windows 7.
I never change my passwords since I set up this notebook. Yesterday, when I logon to the notebook, the screen showed a message that my passwords not match.
Since I never changed my passwords, I tried to logon a couple of times. The screen then showed another message . It says the user Profile Service failed the logon. User profile cannot be loaded....
View 2 Replies
View Related
Dec 23, 2014
I can't log on to my laptop.messages always pops up THE USER PROFILE SERVICE SERVICE FAILED THE LOG ON and on the bottom it says USER PROFILE CANNOT BE LOADED.
View 1 Replies
View Related
Oct 1, 2014
I have tried to get into my laptop model:dv6-1310ei Prod no:vs080ea#acq,serial no:cn94769wf,pavilion dv6,,after typing my password,the result I get is "user profile service failed to login,user profile cannot be loaded....
View 1 Replies
View Related
Mar 6, 2013
I have a Inspiron Mini 1012. I created the restore factory image on a usb through the Dell DataSafe local backup program that it came with. Had no problem installing it. But when I turn on computer and boot into the usb I get an all black screen with the following. BTW the laptop has no problem starting up regularly no issues at all. Will be selling and want to wipe the drive.
WINDOWS BOOT MANAGER:
WINDOWS FAILED TO START. A RECENT HARDWARE OR SOFTWARE CHANGE MIGHT BE THE CAUSE.
1 INSERT DISC
2 CHECK LANGUAGE SETTINGS???
3 CLICK REPAIR COMPUTER
FILE: /WINDOWS/SYSTEM32/BOOT/WINLOAD.EXE
STATUS: 0xc000000d
Info: the selected entry could not be loaded because the app is missing or corrupt.
AGAIN, I have no problem starting computer up any time. Did I load this wrong? I just purchased the USB for this so anything I need to do?
View 5 Replies
View Related
Aug 15, 2008
These are the best drivers I have found so far.
Windows Vista 32 Bit
Quadro 3600M
177.79 Beta Drivers
600/900/1500
3DMark Score 9145
SM 2.0 Score 4288
SM 3.0 Score 3982
CPU Score 2212
625/950/1563
3DMark Score 9447
SM 2.0 Score 4421
SM 3.0 Score 4132
CPU Score 2277
To compare, here are the 175.75 results
600/900/1500
3D Mark - 9086
SM 2.0 - 4193
SM 3.0 - 3909
CPU - 2296
625/950/1563
3D Mark - 9345
SM 2.0 -4354
SM 3.0 -4059
CPU - 2292 ...
View 15 Replies
View Related
Apr 8, 2008
Was wondering if any of the programmers out there could crack the M6300 bios so it would blind flash a M1710. I have a video card here from an M6300 and an M1710 that I would be willing to brick and RMA if it doesnt work.
View 15 Replies
View Related
Aug 12, 2007
"Notebook Italia has shots and specifications for a rumored 17-inch Dell Precision M6300 laptop, which could replace the ageing Dell Precision M90. We'll start with the most interesting feature, which is a BTO option for up to 8GB of installed RAM available when you include a copy of Vista 64-bit. Beyond that, the M6300 is rumored to feature Intel Core 2 Duos from 1.8GHz up to 2.4GHz, with a 2.6GHz Intel Core Extreme X7800 topping out the line. It'll also come with options for NVIDIA Quadro FX 1600M, 2600M, or FX 3600M graphics cards. There will apparently also be options for 1440x900, 1900x1200, and 1920x1200 glossy and matte displays, and a Blu-ray drive configuration. The word is that this model could ship by August 31st, so at least you haven't got long to wait."
View 15 Replies
View Related
May 3, 2008
picked up this system last wkend but still in the progress of benchmarking and testing
dell m6300
t7700=2.4gig
4gig ram
160gig 7200rpm hitachi
fx3600m video card
bluray/dvd burner
1900x1200
vista business 32bit
3dmark 06- from factory no tweaks about 7800
overclocked video card from 500->550, and ram from 800->880
= 3DMark Score 8429 3DMarks @550/880
SM 2.0 Score 3843
SM 3.0 Score 3689
CPU Score 2117
3dmark 06 o/c video card @600/920
=8845
SM 2.0 Score 4111
SM 3.0 Score 3930
CPU Score 2105
3dmark 06 @660/980
3DMark Score 9341 3DMarks
SM 2.0 Score 4400
SM 3.0 Score 4244
CPU Score 2113
3dmark 05 - stock 500/800
13711 3DMarks
CPU Score
View 15 Replies
View Related
Jul 9, 2008
this short review was already posted by me in the dell 17" section,
but i'll put it here, too, so it is easier accessable for all forum users.
it is also a little different, since i added a few things, which i noticed
while playing around with the laptop.
DELL Precision M6300
a few days ago i got my precision m6300 notebook from dell.
so far i benchmarked it with 3dmark06 and took a short look at it.
i payed 1483 euro and the laptop came with the following options:
core2duo t8300 2.4GHz/3MB L2 cache
nvidia fx 3600m card with 512MB
2GB 667MHz RAM (upgraded to 3GB myself)
200GB HDD 7200rpm (seagate)
1440x900 non glare display (lg, replaced by a samsung)
fingerprint reader
vista business to xp professional downgrade (you can use both)
3 years international guarantee
1. 3dmark06
i did the 3dmark06 benchmark at stock clock speeds (i think it's 500/799) with the stock dell driver 175.75. i am running the preinstalled xp pro operation system and most unnecessary background processes are disabled. i have:
8860 3dmarks
with a light overclock (600/900) i have:
9686 3dmarks
i think that's pretty nice. considering the slower cpu (2.4GHz vs. 2.8GHz) and the 175.75 stock dell driver, which is not optimized for gaming, the performance comes pretty close to the 8800GTX in the alienware/ notebooks (~9200 3marks) and it is pretty much the same like the mySN notebook's with the same processor (~8900 3dmarks).
this fact makes me think, that the fx3600 is probably rather a modified 8800gtx card than a gts and that the info shown by gpu-z is wrong. but who knows.
as the card can be overclocked even higher and also there is a way to oc the cpu, the notebook is able to get 10.000+ in 3dmark06.
btw: overclocking is very easy, you can just do it with ntune and there is no need to flash the vbios.
2. what's new
the notebook is very similar to the inspiron 9400/e1705 i had before.
the differences are:
a. different colour (makes it look a lot better)
b. the useless media direct button is used to switch between performance and battery save mode now (useful)
c. the battery is stronger (4 hours battery life vs. 2.5 hours)
d. fingerprint reader available................................
View 15 Replies
View Related
Oct 11, 2014
My laptop logged me off while using it and I tried log back on but I keep getting this message "user profile service failed the log on , user profile cannot be loaded." But it lets me in as a guest but cannnot let me in as an administrator. I'm 100% certain my password is correct.
View 3 Replies
View Related
Jun 26, 2008
yesterday i got my precision m6300 notebook from dell. so far i benchmarked it with 3dmark06 and took a short look at it. i payed 1483 euro and the laptop came with the following options: ...
View 15 Replies
View Related
Oct 15, 2007
if anyone has tried to put a 7950GTX from an M1710 into the Precision M6300. My boss wants me to order one for him but he wants to know if he can put in that card for gaming reasons.
View 11 Replies
View Related
Jan 8, 2010
I have a M6300 that has a 80GB hard drive that I would like to replace.
I am looking for the largest size possible with good read/write speeds
View 9 Replies
View Related
