Well i can usually fix my laptop problems but this one has me very surprised and i wanted to ask for opinions before doing somehting drastic (like changing the screen)
But alf m laptop screen goes dim, if this were the only thing the anwser would be obvious (broken screen change it) but the thing fixes when it goes into battery and slowly comes back when its conected again
I has virtually the same brightness on battery mode than on conected mode so the only real thing conecting her does its dimming alf the screen.
Why would it work while on battery and not conected? and why only alf screen?
I'll start off with a quick "thanks" to everyone here for all the great info - was a big help when selecting a laptop to purchase! Now my issues...
Just got a refurbed E6400 in the mail from Dell Outlet. First odd thing I noticed is that it sometimes randomly makes a quick succession of rapid clicking type sounds (sounds kind of like HDD activity) followed by a beep that doesn't come from the laptop speakers because they are muted.
This little pattern happens anywhere from 3 to as much as ~12 times. Nothing bad seems to come of it yet, but its annoying and would be somewhat disrupting to classes if I use it for note-taking. This has happened maybe 4-5 times in the 3 hours that I've had the computer.
Any ideas what this might be? Note that I recently got a BSOD (yes, within HOURS of using the machine!) and since then I haven't experienced the noises, but then again the BSOD was only ~30 mins ago .......
After spending a great deal of time reading through various forums I've arrived here in hopes of getting Fallout 3 to run properly on my M6300.
Whenever run the game it seems to wind up having many graphic bugs (improper texture mapping etc.).
I believe the issue lies with the fact that the M6300 uses a Quadro card which isn't optimized for game playing--though I would appreciate it if I could play the game on any level, albeit the lowest possible settings.
I'm just selling my Inspiron 9400 on eBay and considering to buy a M6300 instead. It seems to be a powerful Laptop and a worthy upgrade.
1. Is it worth to buy 3 GB of RAM instead of 2 GB? I mean, is there ANY performance boost (for gaming)? Or will upcoming titles be probable of making use of more than 2 GB? I will be using Win XP btw...
2. Is the C2D T8300 (2.4GHz,3MB L2 Cache, 800MHz FSB) a good choice? Or is the T9300 (2.5GHz) THAT much better (in terms of gaming performance)?
3. Is the 1440x900 non-glossy screen any good? Maybe some comparison to the one I used before (sharp/1920x1200/glossy)?
4. My set of choice will cost around 1550 euro (without the VAT Tax) and be something like:
- T8300 (2,4 GHz) - FX 3600 - 200 GB HDD (7200 rpm) - 1440x900 non-glossy - 3 years guarantee
Is there any 15"/17" laptop from dell with a similar graphic performance at a similar (or cheaper) price?
5. Is it really worth to pay the 350 euro more to get the fx 3600 instead of the fx 1600?
As far as I can see it the only option with the possibility of docking and decent graphics performance are the m90/m6300 (regardless of manufacture). Has anyone heard news of a 8800 equivalent card for the m6300? I am duo to replace my m90 and believe the docking to be very convenient. Why doesn't the 5793 or m15x come with a docking option!
i recently saw some cheap mobile penrynn processors on ebay. so i think about upgrading my cpu in the future (they get cheaper from day to day) .
but i have the following questions before further considering that:
1. does changing the cpu on your own void your dell warranty in any way? 2. is it difficult to change it (never opened my laptop before)? 3. can i use ALL of the processors listed on the bottom of this post? (as the x9000 has 44 watt instead of the others' 35 watt) 4. is it just plug & play /stick the new cpu inside and it works?
I'm not looking to debate the geforce vs quadro performance nor do I want people to tell me to wait for the 9m series cards, just a couple quick questions.
Does the m1730 have a docking port? From what I can find, I'm thinking it does not. For that matter, does the m6300 have one? I think it does...
Can an 8800gtx from an m1730 be put into an m6300? If not, I'll be fine with the 3600m, but I prefer geforce cards.
If yes, where can you get an 8800gtx and how much do they cost? I've seen people saying anything from over $2000 to $700.... which is quite a difference.
I guess while I'm at it, are there any other huge issues that I've maybe overlooked? I'm thinking about things like the huge LCD problems that everyone experienced with light leakage and whatnot on the m170/9300 series and even overflowing into the next gen stuff iirc.
I have installed a FX 2500M (rev A02) on a M6300 system board A10 Bios, the card is working but its clock is fixed to 100MHz (100MHz core + 100MHz mem).
FX 2500m doesn't switch to 3D Low mode (200/300) or 3D Performance mode (500/600). It always remains on 2D Mode (100/100)
Off Course the same card works correctly on M90 System Board.
I have tried many drivers, DELL version and generic version by laptopvideo2go, but same results (always fixed to 100MHz).
I have tried Rivatuner to force clock switch. Same results No Switch
I have even installed a new OS (Vista 64) and with it, I have a strange situation.
With Vista64 (no SP1) original driver supplied by MS (and based, I suppose, on forceware 96.xx) the card seems to works at high clock.
No information tools can be used (with MS Driver) so I can't see which clock are active but 3D performance (games and benchmark) are near the performance achieved with M90.
But once I update the driver by installing a recent version supplied by Nvidia (Dell version or generic is the same), the card blocks to 100MHz even under Vista64.
Unfortunately with MS Driver there are many graphics error and it isn't so usable with 3D application (i.e. games) and furthermore I want to use the card with XP32 (Vista64 has been installed only for tests).
Was wondering if any of the programmers out there could crack the M6300 bios so it would blind flash a M1710. I have a video card here from an M6300 and an M1710 that I would be willing to brick and RMA if it doesnt work.
"Notebook Italia has shots and specifications for a rumored 17-inch Dell Precision M6300 laptop, which could replace the ageing Dell Precision M90. We'll start with the most interesting feature, which is a BTO option for up to 8GB of installed RAM available when you include a copy of Vista 64-bit. Beyond that, the M6300 is rumored to feature Intel Core 2 Duos from 1.8GHz up to 2.4GHz, with a 2.6GHz Intel Core Extreme X7800 topping out the line. It'll also come with options for NVIDIA Quadro FX 1600M, 2600M, or FX 3600M graphics cards. There will apparently also be options for 1440x900, 1900x1200, and 1920x1200 glossy and matte displays, and a Blu-ray drive configuration. The word is that this model could ship by August 31st, so at least you haven't got long to wait."
this short review was already posted by me in the dell 17" section, but i'll put it here, too, so it is easier accessable for all forum users. it is also a little different, since i added a few things, which i noticed while playing around with the laptop.
DELL Precision M6300
a few days ago i got my precision m6300 notebook from dell. so far i benchmarked it with 3dmark06 and took a short look at it. i payed 1483 euro and the laptop came with the following options:
core2duo t8300 2.4GHz/3MB L2 cache nvidia fx 3600m card with 512MB 2GB 667MHz RAM (upgraded to 3GB myself) 200GB HDD 7200rpm (seagate) 1440x900 non glare display (lg, replaced by a samsung) fingerprint reader vista business to xp professional downgrade (you can use both) 3 years international guarantee
i did the 3dmark06 benchmark at stock clock speeds (i think it's 500/799) with the stock dell driver 175.75. i am running the preinstalled xp pro operation system and most unnecessary background processes are disabled. i have:
with a light overclock (600/900) i have:
i think that's pretty nice. considering the slower cpu (2.4GHz vs. 2.8GHz) and the 175.75 stock dell driver, which is not optimized for gaming, the performance comes pretty close to the 8800GTX in the alienware/ notebooks (~9200 3marks) and it is pretty much the same like the mySN notebook's with the same processor (~8900 3dmarks). this fact makes me think, that the fx3600 is probably rather a modified 8800gtx card than a gts and that the info shown by gpu-z is wrong. but who knows.
as the card can be overclocked even higher and also there is a way to oc the cpu, the notebook is able to get 10.000+ in 3dmark06.
btw: overclocking is very easy, you can just do it with ntune and there is no need to flash the vbios.
2. what's new
the notebook is very similar to the inspiron 9400/e1705 i had before.
the differences are:
a. different colour (makes it look a lot better) b. the useless media direct button is used to switch between performance and battery save mode now (useful) c. the battery is stronger (4 hours battery life vs. 2.5 hours) d. fingerprint reader available................................
I'm looking to buy one of these machines to replace my 2 year old M90 (which I upgraded to full spec, 2500fx, 4gb, fastest available fitting processor).
Essentially both machines have X9000, 4gb RAM, 8xDVD. The 6300 has 200gb HD, and a 512mb 3600fx card, the 1730 has 2x160gb and dual sli 8800gtx. The M6300 is about £100 less ($200).
I'm struggling to decide :- I love the screen and design of my M90 (the glossy screen on the M1730 looks nasty to me), but I'd imagine the 1730 would outperform the M6300 quite substantially (although my M90 actually drew with if not beat its XPS sibling on several games). The M90 was also built fantastically well....I'm not sure about the 1730 never having seen one.
I have an M6300 Mobile Workstation that does not turn on.Â The green "On" indicator goes on and then the Cap Lock indicator just blinks.Â The screen never turns on and I never see the Dell opening splash screen when starting the computer.Â I have to hold the power button for over 20 seconds to turn the unit off.
What is going on with this computer especially what the blinking Cap Lock indicator means?Â Can I guess that it could be a hard drive problem because it tries to start, but never does and hangs with a blank screen, a Blinking Caps Lock indicator and the "On" indicator on steady?
I'm curious if anyone knows if these notebooks can be overclocked? If so, how?
I read a review that one laptop vendor allowed over-clocking via BIOS but I'm not sure if Dell does this also and was hopeful that those of you much more learned than I could tell me if it's possible on the new Dell 6300 64 bit with the Intel Core 2 Duo Extreme X9000 chip?
I have a Vostro 1500, which I bought 10 months ago. About 3 months ago the screen became loose and wobbled about 10 degrees when computer was moved or if I was on the train and it went over bumps. I tightened the screws as advised but this did not have any real effect. Dell engineer came and replaced the back cover with new hinges, (as they though hinges may be broken/at fault but they were fine,) but some wobble was still noticable so he ordered a new base. He came today and took the screen out complete with all the screen casing out of the old base, and put it into the new base, but still wobbled, so just put it back in the old base as it wouldn't have cured the problem.
Now yesterday, after he put the new back cover on, he had to take the plastic around the front of the screen off. After he put it together I noticed that the screen is no longer flush with the plastic surround and it annoys me! Am I just being finicky/picky or should I ask them to fix it?
Hi all, new person here. I did a search on LCD screens but can't find my problem anywhere.
Here's the background and problem:
Vostro 1500 with Chungwha 1280x800 screen that got cracked by my kids. I ordered a replacement screen from a company off Amazon.com that was highly rated. Got the screen and installed it. It is make by Chi Mei. When I powered up the computer I got 8 screens of start up and it was very dim. Once it went past the Windows start up screen everything went black. It would only continue to Windows screen, still showing 8 windows in safe mode. I hooked up the old screen and everything worked fine.
I contacted the company and they air expressed me another screen, which I received yesterday. Hooked it up and got the exact same problem, which leads me to believe it's the Dell that doesn't like it. I will try and attach some photos because I am at a loss.
when i first got this laptop i noticed that the screen was distorted and there was red lines everywhere and the screen was shaking abit. so i contacted dell and they sent me a repair guy to fix it. he fixed it in about 15min by pulling apart the laptop and replugging in the screen. but now its happening again. so i think the thing that plugs in is loose or somethin. so what do u think i should do out of the following options.
1. open it myself and replug it (im a noob and will try remember best what he did)
2. get techinician to come in again (bothersome as i have school)
I was browsing the internet a day ago and I was on a "COLLEGE" website so i know this is not due to a virus. At this time all of a suden my screen went black.
I powered the laptop off and turned it back on, The Dell logo appeared but the screen was fuzzy and had some "tearing" i dont really know what to call it but it doesnt look right. Kind of like an old VCR playing videos. The screen then whent black after the windows xp splash screen. The laptop still boots to windows but it does not display anything.
I booted into safe mode, everything functions correctly and the way it's supposed to. I then booted into VGA mode same thing everything functions and works the way it is supposed to. I also ran some virus scans just incase, nothing was found.
Whilist in safe mode i changed the resolution down to 800 x 600 and still no luck after booting in regular mode.
In VGA mode i tryed to change resolution and the screen displayed some blue fuzzy lines then whent black.
After this I booted back into safe mode and done severeral diffrent System Restores at diffrent dates. Still no luck
After going through all this I am assuming this is a GFX card problem. The laptop is about 3 years old and ive played games pretty hard on it ever since. The card has defenitly gone through some some stress. Can anyone confirm this?
I know that the i9300 sells for about 400 working, and i checked on ebay for a card that is a whopping 180 bucks. Id just assume buy a new laptop. Then sell the i9300 laptop for parts because everything else works fine. Or maybe buy the card swich it out and sell it for a price. Maybe there is a way to fix it i dont know. can anyone help?
Lastly, i thought i would add that when i check the bios the card is recognized and it displays all the correct info for the card. IS there a way to tell for 100% that the card is bad?
Just bought the 3521 Inspiron touch screen.Â Two questions:Does the touch screen require a screen protector?Â Many different answers.Â Would like your opinion!The outside cover shows fingerprints (even with clean hands).Â Can the outside cover be replaced to a different color or type (that doesn't show fingerprints)?