I know I have already asked this question, but I'm really concerned. I have a xps 16, and after it wakes up CPU stays above 80% for the entire time.
I just talked to a dell techie and they said it might be caused by a virus. What do you think? It's brand new and I have McAfee on all the time. (I ran fn+power on diagnose, everything's fine)
For some reason my CPU usage starts jumping up to around 80% whilst scrolling on wepages, pdfs, etc.
View 3 Replies View RelatedLast week I bought a 22" LG W2261V external monitor for my dell m1330 with Nvidia 8400GS.
After about 10-20 minutes of viewing a HD movie my CPU usage burst to 95-100 % and won't go down unless I unplug the external monitor. I checked this with another external monitor and the result is the same.
BTW of course I view HD movies all the time before I bought this external monitor without any problem.
I tried with vista 32-bit and windows 7 64-bit but no good.
i play facebook flash games like restaurant city, pet society..etc in battery mode, cpu usage will be around 70% and the games very lag, this problem occurs in both balanced & power saving battery mode ...
View 3 Replies View RelatedI have a Sony Vaio fw 490 CTo for a week and it's running window vista home premium 64x everything doing fine until i got freeze when playing game. I open taskbar manager and saw my physical memory is at 90% ......
View 4 Replies View RelatedI've had my acer aspire 5101AWLMI for almost two years, and it's always worked fine, at times it was a bit slow, so I upgraded the given ram (1gb) to 4gb (the accepted maximum). However, recently A new problem has developed.
Sometimes when I run a program (it can be anything from a full-screen high-spec video game to a tiny browser-based flash video) My computer becomes really slow, until I minimise it. I checked on task manager, and my CPU usage jumps up to 100% when the program or applictaion is open, and falls back to around the usual when I minimise it.
It's not a virus, there are no extra processes running, just the process that /are/ currently running (espescially the one that slows everything down) take up way more of the cpu uses than normal. My processor is an AMD Turion 64 Mobile technology MK-36 (2.0 ghz, 512 kb L2 cache).
When is boot up my Split sometimes but not always the Memory column in task manager shows 95%, and the pc runs really slowly. But i have nothing running.
The biggest use showing is Service Host: Local System.
High CPU Usage despite nothing showing on Task Manager or Process Explorer.
I was asked to have a look at a relatively new Acer Aspire 6530g laptop recently that was beginning to become almost unusably slow all of a sudden. The system (which comes with 4gb of ram) literally can no longer run a couple of simple applications at the same time. Displaying typical behaviour of high CPU usage, ie taking a long time to respond, typed sentences seeming to pause and then jump to the end, video noticably jerky accompanied by a crackling through the speakers.
The system had a fresh re-installation of Vista done, which seemed to solve the problem briefly, reappearing again after a week or so, and then upgraded from Vista to Windows 7 in an attempt to solve the problem, again the symptoms appeared to stop after the upgrade (or weren't as evident) and returned yet again after only another week or so.
First thing i did was check task manager for something slowing the system. I suspected perhaps some malware or a trojan on the system.
This is where it gets weird. Nothing. If for instance theres just 1 browser window playing a flash game, it slows to a crawl. CPU shows 75-95% usage, yet nothing is seemingly using it. To go a little deeper I installed sysinternals process explorer to see a little deeper into what might be causing it. Again, nothing. Showing overall High CPU usage, but nothing appeared to be using all of the CPU..................
I have a Sony Vaio VGN-Z590 with windows 7 32 bit professional installed. When I switch to speed mode and hook up a monitor (24" dell LCD) via HDMI->DVI the graphics card temperature goes up to around 80-95C (measured with real temp 3.40) and the CPU temp also goes up into the 60-70s. No programs are using the CPU heavily. During this process the fans go up to max and the computer gets really loud. I have all the latest drivers installed and the latest BIOS.
I was wondering if anyone else has a problem like this? Would installing 64 bit windows 7 be better? It makes it really noisy when I hook up a monitor via HDMI. Any ideas?
Everything is perfect in stamina mode, low temps, low cpu usage.
when im unzipping files or when cpu usage is high my wireless mouse will lag really bad but the touch pad will work fine?
View 5 Replies View RelatedI recently purchased a HP15-r085nd (Win 8.1 with Bing), and right out of the box I experienced this problem:
After waking up from sleep mode (usually after the very first time of waking up from sleep mode, but always after the second time), the process 'System interrupts' has high CPU usage, up to 45%. The laptop then responds very, very slow. Also, in Internet Explorer (but only in Internet Explorer, it seems!) keystrokes are missing out.
I tried the following:
-Implemented all Windows updates, all McAfee updates and all HP Assistent updates. No result.
-Reinstalled all drivers, no result. Windows system restore: no result. Factory reset from recovery partition: no result. Then implemented all updates again: no result.
-I tried to use Microsoft Xperf to diagnose the problem: it seems to blame wdf0100.sys for the high CPU usage. (That is, if I interpreted the results in the right way.)
-I then did some troubleshooting with Microsoft Support: they asked me to disable all startup items in the Task manager, and disable all non-Microsoft services in msconfig. The result was that the high cpu usage of 'System Interrupts' occured less frequently after the first time of coming out of sleep mode, but still it always occured after the second time of waking up out of sleep mode. Uninstalling McAfee seems to have the same effect, by the way.
-I then did some troubleshooting with the store were I bought it. They used a driver program to install some newer versions of drivers. Also to no avail.
They then gave me another laptop of the same model (r085nd). This one had exactly the same problems. So I suspect that ALL laptops of this model have the same issue!
-I then did some troubleshooting with HP Support. We updated the BIOS (F.24), without result. We did some additional driver updates from the HP Website, no result. We wanted to update the Intel HD Graphics driver (sp65598), but we couldn't install it, getting an error message saying minimum system requirements weren't met.
I hope HP support can come up with a solution (they wanted to look further into it). If so, I'll promise to post it here, as it probably affects other HP r085nd's as well.
I have a Y510p. After upgrading the touchpad driver ( Touchpad Driver (Synaptics, Elan) for 64-bit Windows Version 17.0.10.12/11.4.26.1) and ,possibly coincidentally Windows 8.1 I noticed a process called "System" in the task manager is eating up 6 to 12 % CPU usage. Opening its file location seems to reveal that its "ntoskrnl" application.
After a system factory reset and many curse words I noticed a peculiar thing. The processor shows high usage only when the mouse is being used. The more the mouse is used the higher the CPU usage (caps at about 12%). I am assuming this is a bug.
I have removed the driver and tested this and the process no longer used the CPU by that amount. But I lose all my features. Is there any way I can resolve this issue without having to either wait for a newer version of the driver (whih may take a very long time?). Also is there any place where I can access the older variant of the driver?
I have an acer Aspire 5733Z and all of a sudden I am having an issue with the ETD Control Center (ETDCtrl.exe) using and average of 50% CPU usage.
It's causing my laptop to lockup and go slow.
This just started today and came out of nowhere, I've never had an issue before.
Here's the list of recent changes and/or updates I've made. But they were 3 days ago: Norton Security SuiteJava 7 update 71Acer System Information I can't seem to find anything about this.
I have a dell inspiron N5050 core i5, 8GB RAM but when I run applications like GNS3, the cpu usage runs up to 100% and freezes whereas the RAM usage is only about 2.7GB (that is, about 33%). How can I get the RAM to function optimally?
I even had to upgrade to Windows 8 thinking it would solve the problem but here I am stuck with the same problem.
I am editing some AVCHD home videos using 1558(spec in my signature). I noticed when I do that my CPU cores rempain between 45-52C range but my GPU shoots to 64C and stays there.
I am concerned about the GPU as I understand the only fan in the 1558 is on the CPU so GPU is not getting any direct cooling.
My question is if there is a way to lower GPU workload and put it on CPU for my video editing .....
background:
I am now using my FOURTH Dell Latitude E6400 in 11 months. I have had verheating issues with every one of their replacements (nVidia card didnt seem to play nice with dual external monitors through the docking station).
My first and second computers alos had major issues with the CPU spiking every time I did something that was graphics intensive.
Dell FINALLY agreed to send me one with an intel chipset instead of the nVidia card. I just started using it and every time I do something graphics intensive, the CPU spikes again. It can be a youtube video or something as similar as uing my task bar and it will affect the cpu usage greatly (will jump from 20-70+ percent).
I am on 32 bit Win 7; where can I find the latest drivers for the intel chipset?
Also, the process that seems to be eating all my cpu is Firefox...
my i8kfangui shows a temperature of 51*C right now. It is "idling" for the most part. For some reason a process called svchost.exe (Network Service) utilizes much of the CPU, fluctuating between 15% and 50% with 250,420K of memory usage. I've tried to just terminate the process before, but right after I do that my laptop forces me to restart it.
View 15 Replies View RelatedDoes anyone know how much energy Dell's latest laptops use when in standby mode? I've tried looking on their website, but I can't find any definitive figures (I'm using a Precision M4400, if that helps).
Before I always used to hibernate or shutdown my laptop to save energy, but I'm curious if standby mode really uses much power or not.
My xps 16 uses 100% of CPU memory after woken up, and it's like that for a long time. I am really concerned. I have a T9550 2.66ghz cpu, and the system is brand new
View 5 Replies View RelatedI had Windows 7 on Inspiron E1505, it was getting slow So I installed clean Windows 8.1.But even after installing Windows 8.1 I see sometimes CPU usage go over 90%. But CPU and Disk usage come back to around 50% after sometime. I see usage shoots to 90% when I open new tab in chrome or IE. Most of the CPU and Disk is used by Chrome, System, Service Host: Local Services / Network Restricated.
View 1 Replies View RelatedI bought four Dell Inspiron 15 this black Friday from the Microsoft Store. All four of those have the exact same problem of 100% disk usage at the start up right out of the box. I don't want to return as I am a lifelong dell user. But If there is no solution of this problem then why the <profanity> dell sold these laptops?
Here is what I have done to try and fix this problem: Used windows repair tools to check all hardware. All hardware came back okay/// Ran chkdsk /f on the drive //// Disabled windows indexing //// Turned power management to Maximum performance //// Downloaded and used the Dell tools to update all drivers //// Checked programs and removed all unnecessary programs //// Used MSCONFIG to remove certain programs from the startup and from running in the background //// Tried Microsoft Fix It to improve performance //// Nothing works.
I just got a new Dell XPS m1530:
2.5 Ghz
4 Gb RAM
300 Gb HDD
Geforce 8600
Vista Premium
I noticed that I can hear the hard drive spinning (like that little clicking sound it makes) almost like 70% of the time. Is that normal? I tried killing off some applications but it doesn't stop! Is there any way to find which application is doing this, is this even normal?
I'm hoping to prolong the battery usage for my 6 cell for XPS 16 . Are there any tips I could use ?
1) Do I need to remove the battery once it's fully charged when I'm running on AC ? Some say leave it there, some say remove it, does it matter?
2) Also, can i not use my battery below 40% and recharging it back often as it will deter the battery life cycle ? meaning i should always keep it above 40%?
I have a Dell Vostro 3400 laptop that since some months ago is getting very hot after long usage.
I work with this laptop so it is usually powered up all day long.
I always keep the laptop placed on a fan basement that has 3 fans working all the time.
Well... since some days ago, laptop suddenly shuts down powering itself off. When that happen, I place the palm of my hand touching the keyboard and without lying, my hand burns. So I think this is the reason why the laptop shuts down, and I cannot power up again until some period has passed.
Why may be the reason of this heat? hardware problem? how can I diagnose it?
I notice that the FAservice (Fast access) uses more than 1% of the CPU all the time. That is too much for me. Such a service should be near 0% as the welcome page is off.
Do you experience the same thing?
I don't uninstall it at the moment but if I can't find a solution I will do to not short my time on batteries soon.
---
Studio XPS 1645 - Core i7-720QM
I have no idea why the light which indicates the hard disk is in use is constantly blinking.
I have disabled file indexing and just now disabled superfetch but it still seems to be happening. Does anyone have any idea why this might be??
i'm just wondering why my z's memory usage never go back down, it starts with 800mb, when i watch movie, surf the web, use software like photoshop, winrar...
it goes up to 1.6 or 1.7gb and it stays the same even when i close them all, i did the same thing on my dad's toshiba and it went back to 800mb after closing all the program, both have 3gb memory ddr3
I have a summer 09 2.26GHz MBP w/ 2 gigs of ram. The first time I installed Snow Leopard I just did an upgrade, but I noticed a hit in performance... Spaces got slower, Firefox would lag between tabs, apps would take some time to launch, etc. I recently used time machine to backup my Leopard installation, clean installed to Snow Leopard, and used Migration Assistant to move everything back over (including apps). I'm still noticing the same hit in performance when compared to my Leopard install. I thought Snow Leopard was supposed to be faster, not slower?
Anywho, I noticed my ram usage is being choked up. Using iStat Pro I have been consistently monitoring my ram usage. As of now I am running Finder, Firefox (2 tabs), iTunes, Adium, and Skype. This is what the iStat Pro ram readout is giving me:
Wired: 205 mb
Active: 964 mb
Inactive: 496 mb
Free: 121 mb
Are these levels normal? It seems like I'm using an abnormal amount of ram for not a whole lot of intensive applications. Could this be the source of my slow-ness in Snow Leopard?
In addition, I installed Windows 7 Professional via Bootcamp on a 32gb partition. 7 also seems to be pretty darn slow from what I expect. I have Windows Experience Indexes around 5+ out of 7.9 except for the gaming graphics category (4+), but I notice slowness when switching between apps (using Windows counterparts/equivalents to the apps mentioned above). Another example of slowness would be how it took about 20 minutes to extract a 2.5gb Pro/E installer file.
This slowness is starting to bug me! Am I hitting the limits of my machine, or is there something wrong? If there is something wrong, what can I do to fix it?
i deleted the app and now using safari4beta and firefox instead, didn't bothered with installing it again before i know what is wrong and how to fix it, i've checked with the system monitor and safari3 was program responsible.
View 10 Replies View Relatedwhen I dock my in my E-port docking station, my CPU usage will shoot up to 100%, and it may come down periodically to the 80s or 90s, which makes my laptop virtually unusable for anything. I tried a different power cord but it made no difference. Undocked, it works just fine, so it's obvious it's something wrong with the docking station.
View 1 Replies View Related