Lenovo P/Y/Z Series :: Touchpad Driver Causing High CPU Usage On Y510p
Apr 21, 2014
I have a Y510p. After upgrading the touchpad driver ( Touchpad Driver (Synaptics, Elan) for 64-bit Windows Version 17.0.10.12/11.4.26.1) and ,possibly coincidentally Windows 8.1 I noticed a process called "System" in the task manager is eating up 6 to 12 % CPU usage. Opening its file location seems to reveal that its "ntoskrnl" application.
After a system factory reset and many curse words I noticed a peculiar thing. The processor shows high usage only when the mouse is being used. The more the mouse is used the higher the CPU usage (caps at about 12%). I am assuming this is a bug.
I have removed the driver and tested this and the process no longer used the CPU by that amount. But I lose all my features. Is there any way I can resolve this issue without having to either wait for a newer version of the driver (whih may take a very long time?). Also is there any place where I can access the older variant of the driver?
View 1 Replies
ADVERTISEMENT
Dec 4, 2014
I have an acer Aspire 5733Z and all of a sudden I am having an issue with the ETD Control Center (ETDCtrl.exe) using and average of 50% CPU usage.
It's causing my laptop to lockup and go slow.
This just started today and came out of nowhere, I've never had an issue before.
Here's the list of recent changes and/or updates I've made. But they were 3 days ago: Norton Security SuiteJava 7 update 71Acer System Information I can't seem to find anything about this.
View 1 Replies
View Related
Oct 19, 2013
I recently purchased a Lenovo Y510p, and the touchpad uses the ELAN software. However, by default, it doesn't seem to allow you to use two fingers to tap for right click, nor three for middle click.
After digging into the matter, I discovered you can make some changes by installing Asus Elantech driver 11.5.0.9 to allow you to see many more options in the control panel, and I successfully changed Swapping and 3 and 4 finger touch functions.I am struggling to change the double finger tap.
View 9 Replies
View Related
Apr 21, 2014
I was wondering if there is a permanent way to disable the touchpad on this y510p. I hate hitting fn f6 every boot, wake from sleep, etc.
I checked the registry in hklm microsoft windows currentversion run but didn't see any prefixes of syn* in any of the entries. I checked into RTFTrack.exe and that seems to be the camera. Is there a way I can disable this touchpad permanently?
View 8 Replies
View Related
Feb 13, 2014
Assuming there is a setting to change this. At least I hope so. Synaptics. y510p
View 2 Replies
View Related
Oct 22, 2014
The cursor doesn't even display on screen unless I connect a mouse.
It was working fine then suddenly the problem started. I tried FN + F6 but no point
I tried installing this driver : [URL] .... But that didn't solve the problem
I entered device manager >> view by connection type, and I found "Lenovo Pointing Device" with a yellow triangle on it. I uninstalled it and it disappeared forever............. But the problem is still there. It's as if the entire touchpad cable isn't even connected to the motherboard.................
View 2 Replies
View Related
May 19, 2009
I know I have already asked this question, but I'm really concerned. I have a xps 16, and after it wakes up CPU stays above 80% for the entire time.
I just talked to a dell techie and they said it might be caused by a virus. What do you think? It's brand new and I have McAfee on all the time. (I ran fn+power on diagnose, everything's fine)
View 10 Replies
View Related
Oct 11, 2009
For some reason my CPU usage starts jumping up to around 80% whilst scrolling on wepages, pdfs, etc.
View 3 Replies
View Related
Jul 15, 2009
I have a Sony Vaio fw 490 CTo for a week and it's running window vista home premium 64x everything doing fine until i got freeze when playing game. I open taskbar manager and saw my physical memory is at 90% ......
View 4 Replies
View Related
May 21, 2014
I have reinstalled the drivers for the Nvidia card and now I no longer see the icon in "hidden" icons of the bar, that showed which programs are using this card.
View 2 Replies
View Related
Jun 27, 2009
Last week I bought a 22" LG W2261V external monitor for my dell m1330 with Nvidia 8400GS.
After about 10-20 minutes of viewing a HD movie my CPU usage burst to 95-100 % and won't go down unless I unplug the external monitor. I checked this with another external monitor and the result is the same.
BTW of course I view HD movies all the time before I bought this external monitor without any problem.
I tried with vista 32-bit and windows 7 64-bit but no good.
View 15 Replies
View Related
Feb 20, 2009
I've had my acer aspire 5101AWLMI for almost two years, and it's always worked fine, at times it was a bit slow, so I upgraded the given ram (1gb) to 4gb (the accepted maximum). However, recently A new problem has developed.
Sometimes when I run a program (it can be anything from a full-screen high-spec video game to a tiny browser-based flash video) My computer becomes really slow, until I minimise it. I checked on task manager, and my CPU usage jumps up to 100% when the program or applictaion is open, and falls back to around the usual when I minimise it.
It's not a virus, there are no extra processes running, just the process that /are/ currently running (espescially the one that slows everything down) take up way more of the cpu uses than normal. My processor is an AMD Turion 64 Mobile technology MK-36 (2.0 ghz, 512 kb L2 cache).
View 4 Replies
View Related
Dec 12, 2014
When is boot up my Split sometimes but not always the Memory column in task manager shows 95%, and the pc runs really slowly. But i have nothing running.
The biggest use showing is Service Host: Local System.
View 6 Replies
View Related
May 12, 2013
I own one Lenovo E430. By now he is running Windows7, fully patched and updated. My issue is related with ultra-high touching sensitivity of the TouchPad. The TouchPad can react even on cloth touch.
This is problem for me, because I use TrackPoint, I don't have external keyboard and during high utilization extra unwanted clicks lead to unpredicted events. So, my question is how can I disable the Touchpoint.
View 4 Replies
View Related
Nov 7, 2009
i play facebook flash games like restaurant city, pet society..etc in battery mode, cpu usage will be around 70% and the games very lag, this problem occurs in both balanced & power saving battery mode ...
View 3 Replies
View Related
Jan 25, 2010
High CPU Usage despite nothing showing on Task Manager or Process Explorer.
I was asked to have a look at a relatively new Acer Aspire 6530g laptop recently that was beginning to become almost unusably slow all of a sudden. The system (which comes with 4gb of ram) literally can no longer run a couple of simple applications at the same time. Displaying typical behaviour of high CPU usage, ie taking a long time to respond, typed sentences seeming to pause and then jump to the end, video noticably jerky accompanied by a crackling through the speakers.
The system had a fresh re-installation of Vista done, which seemed to solve the problem briefly, reappearing again after a week or so, and then upgraded from Vista to Windows 7 in an attempt to solve the problem, again the symptoms appeared to stop after the upgrade (or weren't as evident) and returned yet again after only another week or so.
First thing i did was check task manager for something slowing the system. I suspected perhaps some malware or a trojan on the system.
This is where it gets weird. Nothing. If for instance theres just 1 browser window playing a flash game, it slows to a crawl. CPU shows 75-95% usage, yet nothing is seemingly using it. To go a little deeper I installed sysinternals process explorer to see a little deeper into what might be causing it. Again, nothing. Showing overall High CPU usage, but nothing appeared to be using all of the CPU..................
View 9 Replies
View Related
Mar 10, 2010
I have a Sony Vaio VGN-Z590 with windows 7 32 bit professional installed. When I switch to speed mode and hook up a monitor (24" dell LCD) via HDMI->DVI the graphics card temperature goes up to around 80-95C (measured with real temp 3.40) and the CPU temp also goes up into the 60-70s. No programs are using the CPU heavily. During this process the fans go up to max and the computer gets really loud. I have all the latest drivers installed and the latest BIOS.
I was wondering if anyone else has a problem like this? Would installing 64 bit windows 7 be better? It makes it really noisy when I hook up a monitor via HDMI. Any ideas?
Everything is perfect in stamina mode, low temps, low cpu usage.
View 3 Replies
View Related
Feb 20, 2010
when im unzipping files or when cpu usage is high my wireless mouse will lag really bad but the touch pad will work fine?
View 5 Replies
View Related
Dec 3, 2014
I recently purchased a HP15-r085nd (Win 8.1 with Bing), and right out of the box I experienced this problem:
After waking up from sleep mode (usually after the very first time of waking up from sleep mode, but always after the second time), the process 'System interrupts' has high CPU usage, up to 45%. The laptop then responds very, very slow. Also, in Internet Explorer (but only in Internet Explorer, it seems!) keystrokes are missing out.
I tried the following:
-Implemented all Windows updates, all McAfee updates and all HP Assistent updates. No result.
-Reinstalled all drivers, no result. Windows system restore: no result. Factory reset from recovery partition: no result. Then implemented all updates again: no result.
-I tried to use Microsoft Xperf to diagnose the problem: it seems to blame wdf0100.sys for the high CPU usage. (That is, if I interpreted the results in the right way.)
-I then did some troubleshooting with Microsoft Support: they asked me to disable all startup items in the Task manager, and disable all non-Microsoft services in msconfig. The result was that the high cpu usage of 'System Interrupts' occured less frequently after the first time of coming out of sleep mode, but still it always occured after the second time of waking up out of sleep mode. Uninstalling McAfee seems to have the same effect, by the way.
-I then did some troubleshooting with the store were I bought it. They used a driver program to install some newer versions of drivers. Also to no avail.
They then gave me another laptop of the same model (r085nd). This one had exactly the same problems. So I suspect that ALL laptops of this model have the same issue!
-I then did some troubleshooting with HP Support. We updated the BIOS (F.24), without result. We did some additional driver updates from the HP Website, no result. We wanted to update the Intel HD Graphics driver (sp65598), but we couldn't install it, getting an error message saying minimum system requirements weren't met.
I hope HP support can come up with a solution (they wanted to look further into it). If so, I'll promise to post it here, as it probably affects other HP r085nd's as well.
View 5 Replies
View Related
Sep 29, 2011
I just bought a Lenovo Ideapad S210 a couple of month ago. When I start using the touchscreen everything works for a couple of seconds and then randomly bubbles with about a half inch diameter start popping up, usually in a horizontal fashion across my screen. These bubbles that I am referering to are the visual effect when a finger touches the screen. So far these rogue bubbles seem to spawn whenever I start using the touchscreen, and keep me from controlling my cursor with my track pad, touch screen, or an external mouse once they appear. The only thing that works then is to shutdown the laptop, which is a big annoyance.
It is running on Win 8 default settings.
View 3 Replies
View Related
Oct 26, 2013
My lenovo Y510P used to always be at 100% but I have realized it has been decreasing by 1 every day. I have it on Maximum Battery Life with the Energy Management application.
It is currently at 85% and I would have posted this sooner if I had payed attention. I changed it to Optimized Battery Health and it is now dropping, currently at 75%.
I always leave the laptop plugged in because I usually play games on it such as battlefield, dayZ, counter strike, etc.
View 9 Replies
View Related
Jan 4, 2014
I've been playing Battlefield 3 for some time on Auto settings (most of them are Ultra) and my FPS were always in the range 65-85. Yesterday morning everything was fine, however at night when I opened the game again I had 10-15 FPS. I haven't changed anything in my laptop settings so I don't know why this is happening.
P.S: I only have 1 GPU (not the SLI version) so I know it's not a loss of power. But my battery settings are set to "Optimized battery health". Does it affect performance ?
View 4 Replies
View Related
Feb 10, 2015
I've got Y510p with USB 2.0 not working. By the time it malfunctioned it was under warranty and I sent it in the service center. They have claimed that it has been repaired (USB board has been changed) but it is still not working and my warranty ended like 3 days after I sent it back. Since then (1 month ago) I am returning it to the service center for 3 times (last one was today) and I feel they can't fix it. URL....
View 3 Replies
View Related
Sep 13, 2013
I have an Y510p laptop and I am not pleased with the hdd performance, so I wanted to add an SSD, but the slot is literally missing:
what am I supposed to do? I know that this laptop supports only M.2 SSD, and I am ok with that
View 9 Replies
View Related
Jun 6, 2014
I bought Lenovo Y510P . and because of just hyper-v feature on win 8.1 pro also i need to upgrade windows. I found product key with a software and after that i open the "add feature to windows 8.1" . And when I choose "i already have product key" and put the product key , it does not accept . and says "this key won't work" .
So what i should do for getting windows 8.1 pro pack ? and why product key does not work ?
View 7 Replies
View Related
May 6, 2014
Is it possible to overclock the GPU and CPU a lil' bit in my y510p ?? If yes, how much can i boost it up and if it's worth it though...?
View 9 Replies
View Related
Jan 3, 2015
When I recieved my Y510p about 8 months ago, the usb ports worked perfectly fine. Around October they stopped working properly. The only solution which I found to work was doing a system restore. When I did this, an Unrecognized Device in the Device Manager was no longer unrecognized, and was instead replaced by USB xHCL (or something along those lines). However, as soon as i restared my computer again, the ports broke, and the unrecognized device reappeared. Repeating the restore followed by a restart breaks the ports every time.
View 7 Replies
View Related
Apr 9, 2014
My Y510p has been freezing on startup, every startup. It can be completely inoperable for upwards of half an hour before unfreezing. It unfortunately has been occuring since the computer arrived (21 March, this year), so I doubt it has been caused by any software I've added. Given my limited knowledge of computers.
Lenovo Y510p Model 20217
Windows 8(64 bit), Intel Core i7-4700MQ CPU (2.40 GHz), NVIDIA GeForce GT750M, 8GB RAM
View 5 Replies
View Related
Jan 10, 2014
I have a new y510p I just received this week. First thing I did was replace the 1TB HD with my own OCZ Vertex 4 256GB SSD Drive.When I power on the laptop for the first time, it does not find a bootable device (goes through network devices, then says no bootable devices). If I use ctrl-alt-delete to reboot the laptop, it then finds the drive on its own and starts booting into Windows.
I'd like to understand why this does not work on the first boot? I went into the BIOS and saw it says there that no drives are detected.This worries me slightly, as perhaps one day it will decide to no longer recognize the drive after the ctrl-alt-delete?
View 4 Replies
View Related
Jun 9, 2013
Is there any way i can clone the stock hdd on my y510p to an ssd without losing one key recovery?
View 9 Replies
View Related
