I did a factory restore on my XPS m1530 laptop a while ago. Afterward it starts giving my blue screen of death. The most common occurring BSOD is memory management upon start up. Then the last time it gave me a pfnlist BSOD.
View 10 RepliesJust had a BSOD and another suspected BSOD (although I never saw it) in one day... never seen anything like this before.
The one I actually saw was when watching a movie over HDMI, went on for the majority of it and then randomly crashed. Here's what event viewer has to say about it if it's any help:
The computer has rebooted from a bugcheck. The bugcheck was: 0x0000000a (0x0000000000000000, 0x0000000000000002, 0x0000000000000000, 0xfffff80002c07477). A dump was saved in: C:WindowsMinidump122209-14289-01.dmp. Report Id: 122209-14289 .....
I have a Dell Inspiron 1525 that I got new in March 2008, but lately I've been getting a lot of BSODs during normal system use (like web browsing, instant messaging, email, etc.)................................
View 8 Replies View RelatedI got my M1730 in April this year, with the Raid 0 array, 2X160Gb drives, 2X 8800GTX, the physX card, and the 1900X200 display. (and if it matters, the Ivory White colour scheme).
I love the laptop to bits - it was bought to replace a loud, space-filling, 2xdisplay main rig, and it's done that brilliantly.....
...... when it hasn't been crashing.
I've had periods when the M1730 hasn't booted into windows for hours. BSODs all over the place, during windows (vista 32) boot, during windows use. With a Wide variety of crash 'reasons' -
IRQ_NOT_LESS_OR_EQUAL
MEMORY MANAGEMENT,
TCPIP.SYS..
...and a few others that I didn't have a chance to note..
My instinct is to think that it's my mis-management of the new system - I don't particularly like vista, but it uses all the ram i've paid for, and that's good.
But it's crossed my mind that it could be an overheating issue; and it arbitrarily picks a component, or driver to blame.
It actually gave me a RAID0 failure last week - I performed a disck consistency check, and it was all fine..
Ran win7 on my M6300 for quite a while with no problems... M6400 just showed up and I can't seem to work it out. seemingly random BSODs that hit at any time. Analysis shows that the first one was caused by csrss.exe, most after that were caused by ntkrnlmp.exe,
Has anybody else had this happen and figured out which driver is causing the problem? Maybe I should ask "has anybody else installed win7 build 7100 64-bit on a M6400 and *not* had problems like this? If so, what drivers did you install beyond what windows update does for you?"
System config is:
Q9300 quad-core proc
4gb RAM on 2 DIMMs
3700M video
RGB-LED screen (if that matters)
64GB samsung SSD, 500gb WD 5400RPM HD (aftermarket) as secondary drive
verizon rev-a evdo mini-pci card
intel 5300 a/b/g card
fingerprint scanner
i think that's all the important parts...
the first bsod happened before i had installed just about anything at all, other than windows updates. i've been throwing just about every other driver i can find at it to see if i can narrow it down (with the intent of reinstalling from scratch once i figure it out). every time I think I have it figured out, I'll look over at it and notice that it is BSOD'ed or post-bsod rebooting.
I got it back in September, but very rarely, and inconsistently. It's happened maybe 5 times since I've had it, so it's very hard to troubleshoot.
Anyway, I just got another one "Driver IRQL not less than or equal" which could be anything from what I've read. I've run a memory scan with the built in Dell Diagnostics.
is anyone else (other than me) getting 100% blue screens on boot (except for safe mode) after installing the latest December windows updates?
M6400 w/ quad core and nv 3700
Vista Ultimate 64bit
Updates in question:
KB955839
KB952069
KB958624
KB890830
KB956802
KB957388
KB905866 (B)
KB958215 (A)
KB958623
So far, uninstalling all of them from Safe Mode brought my system back. Installing (A) and (B) back in resulted in BSOD on boot again. Uninstalled (A) and the BSOD remained. Uninstalled (B) and the BSOD remained. Then I rebooted into safe mode, did nothing, then booted back into normal and the system is OK again.
I reeeeally don't have time to redo the OS from scratch. I'd have to download all like 90 of those Dell drivers and figure out their install order and everything.... Blegh. (Essentially that would mean this laptop sits closed on the shelf until I have time, which will be somewhere around mid-January 2009.)
I have started this separate thread to get more visibility (for now) but this can be merged into the master 1558 thread eventually.
I have the laptop for 1 week now
Pros:
•Great screen, 1080p screen is easily the best thing about the laptop. Very bright and sharp.
•I5-520m is quite fast. Good enough for most task and even some gaming, I ran the beta of Starcraft for a dew mins and it ran at mid to high settings for most (I have 4570 GPU)
•6200N is a good card and is much faster than the g card I was using in Vostro. Connects to the router in about 10 secs if I turn it off and then turn it on while laptop is on.
•9 cell battery performance is decent, I think I get about 4 hours of use with light to middle load of use. With very light use I should be well over 4 hours.
Cons:
•Slot DVD player is noisy, makes one loud clicking noise when every you boot the laptop. Sometimes there are two clicks.
•Froze one time when I booted up one morning, had to reboot again by holding the power button. Not sure what happened there.
•Biggest issue is heat for me, coming from a 14” Vostro I thought this will produce less heat but it seems to produce the same amount. The touchpad is quite hot to the touch as well as the bottom area just below the laptop. These external temps do not fluctuate much with the change in the core temps, at least that is what it seems to me. My core temps have not been too bad. 35-38C idle, 40-46C with light use (internet surfing), ~50-55C watching youtube etc. 70-74C when stressed 100% for 5 minutes. So what can be done about heat as that is my biggest concern and I have to decided if I want to keep this laptop. I opened the bottom cover and saw the CPU is smack under it. CPU is quite small and the heatsink as well. I could not see where the fan is but it does not seem close to the CPU so no wonder you cannot get heat to get out. Has anyone tired put a larger heatsink over the CPU or put thermal paste?
•Fan Control is very poor but I am optimistic that eventually DELL can update bios to address that. Fan turning on and off every minute is not acceptable.
•Has anyone noticed some light vibration around the touch pad area, when you put your hand to feel it? My laptop seems to have it and it is the highest close to the touch pad area. Not sure if it is the fan or CPU or the DVD player.
Anyway need 1558 users advice as I would like to make the decision on this laptop if I want to keep it. I got it as refurb so the price is quite good for the specs but I do not want it to die after a year and a half.
I'm referring to the Dellienware M17x. I wanted to post this here because I will be purchasing this laptop from Dell Canada.
I was wondering if you guys could tell me how I can save money. I am aware of the EPP 7% discount. IS there any other discount that I could get?
I bought a m15x last year and sent it back since it was defective, I was offered a 5% discount on my next alienware purchase. I called Dell Canada's sales reps and they don't know anything about applying a credit from Alienware.
I sent the email with 5% discount to 5 different reps and they all said that they would send it to their managers and get back to me ASAP. well none of them have gotten back to me .....
I live out of the US and I am going to travel next week to New York and Los Angeles for a week.
I have an address in both locations but that does not help me because shipping takes more then on week for sure.
I ordered a Dell Studio 1558 on January 19, 2010.
i5-520m
4gb 1066mhz
500gb 7200rpm
ATI 4570
1080p
backlit keyboard.
I'm obviously excited about receiving it, however.... after close to a week... it's still in "pre-production."
I've called a few times. First time I was told "It could take up to 48 hours to get out of pre-production and into in-production."
Fair enough. 48 hours later it was still in pre-production, so I called back and they told me it could be a payment issue. So I called the verification department and they told me everything was 100% good to go.
Anyway, different people telling me different things, finally I landed on some honesty. A representative told me that the problem is that there is a part on back-order and so that is why it hasn't moved into production yet. I'm guessing it's the processor, what do you guys think?
Anyway, the original delivery date was projected as February 4, 2010. The guy on the phone today said that I should expect the order to be moved into production within 48 hours (I'm not so sure I believe this) and that the delivery date will probably move to February 9, 2010.
I have absolutely no problem with this, part not in stock = no problem. My issue is, different reps telling me different stories. If it comes down to waiting till February 9 and I get my laptop then, I am fine with that, but if this drags on farther, I would rather cancel my order and purchase from another company.
What do you guys think? Also, has anybody actually received their 1558 yet? What do you think of it?
I really need to know if i can get them to give me a break from being just a week after the 30 days warranty, should i tell them about the B.B.B.?
Would that matter, cuz i have many heat issues with my sxps16?
I don't think that's fair to get a new one and take the chance of getting their refurb parts
I ordered the 14z about a week ago and I dont remember them offering a free Windows 7 update. I guess I assumed it was included. I went to the website a few minutes ago and I see that its in red as an offer.
Do you think if I call Dell and tell them I want the upgrade or I will just cancel my order and reorder they will give it to me? Its seems silly for them to stop production of my laptop just for a free O.S. upgrade.
So about 3-4 weeks ago now I had to have my 7900GS replaced due to artifacting problems, and this ended up being a problem that was not fixed even after 3 repairs and replacements of the GPU itself, motherboard and screen, all got replaced about 3 or 4 times.
I rang up Dell for the 4th time, and asked to have a replacement but was told this was not possible until it gets to the stage where they need to take it in to the workshop. Anyway, the next day the technician came out and replaced the motherboard, GPU and screen again, and the problem was still there. I was sure that this would be fixed now, because they wanted to take it in to the workshop, which they did.
Now, I believe the problem has resurfaced, I was playing Crysis tonight and I had some more artifacting, the same type that I was getting before but, just in smaller areas instead of the whole screen. Here are some screenshots of the issue:
Screenshot 1
Screenshot 2
This has been happening on and off tonight, room temperature has been cool and I didn't notice any overheating.
Now I haven't noticed this within the last hour or so of playing, and goes away if I alt-tab then get back in game. The only other game I have been playing is Counter-Strike Source and I haven't noticed any artifacting in that, but that could be because it's nowhere near as graphically demanding.
I'm worried that the problem will keep coming back and possibly get worse, I have not overclocked nor plan to overclock and keep my machine in a very well ventilated area. This is not user error.
Using official Dell video drivers, was reformatted just week as well.
Do you think it's worth ringing Dell about this and try getting a replacement?
I've gotten my dv5t since august of 08. Early this year, i did a clean install and after that, I have been getting the same bsod when i play GTA IV and some other games. The codes that I were
0x000001, 0x000000000000001, 0x0000000000000000, 0xFFFFFA600005E5180, and 0x0000000000000001
I'm thinking its heat related but this never happened before I did a clean install.
Specs:
T9400
9600M GT
3GB ram
I also undervolted it and have an antec cooler. thanks.
Without undervolting, i reached 91 degrees Celsius for cpu and 86 for gpu. That seems pretty high for me..
Now I recieved this after playing LFS.
if HP might do the Envy 17 this week?
Does HP normally introduce models during this show? What else do they really have to intro?
I bought my Acer Aspire E1-570G in february , and since then im having random blue screens with different codes . Im trying everything to fix this problem almost everyday, and believe me soon i will break it on 2 pieces . Nothing is fixing the problem ... I have bsod files that i can post for u to see them but i dont think they really matter because i get RANDOM bsods. Every time is different ( there are around 10 different codes given that i remember ). If its really needed i can post the codes.
I have sent the laptop to the main service in my country and they said that the laptop " passed the tests" . After coming home and turning my pc on .. BSOD . The laptop went to the service again - This time they changed my HDD . It didnt fix the problem . I cant change my laptop with the warranty because the service says that the laptop is okay .
Over the last few days I've read countless posts abt the same problem as I've been having with my Acer Aspire 5920G. It all started a week ago. I had shut down my laptop the night b4 and in the morning as usual I pressed the power button to start it up, it started up, completed POST and then powered on with a blank/switched off LCD screen and I could hear it going all the way up to the Vista log-on screen...... all this time with a blank screen that had no power. I kept it for a few minutes and then switched it off.
When i tried to restart,........the laptop powers on, the Bluetooth light comes on and the Hard drive led flickers a couple of times and then it'll just sit there unable to load the BIOS! Naturally I thought something was wrong with the BIOS for it to not start or complete POST. But I had absolutely no idea where the BIOS battery was located, so I couldn't do very much abt it (now I've some idea where it is, after a week of tinkering with the motherboard.)
But just to be on the safe side, over the last week I checked the RAM (which was OK), took out and reseated my GPU board (seemed OK, the GPU could have been the culprit coz of the blank screen), removed the Heat Sink (which was covering the CPU and which also acted as a Heat Sink for the GPU) and checked the CPU. The thermal paste that was covering the CPU had melted all around it, so I replaced it with new thermal paste after I cleaned it. Then I disconnected and reconnected the Heat Sink Fan and put it all back together. It didn't restart! The same symptoms as b4 appeared again. But this time after a few secs, it went into an infinite loop of powering on and restarting every 5 or so seconds.
So I thought, I'll give it one last go b4 chucking it for a new laptop! Since the first symptom of the whole problem when this all started was a LCD screen that wasn't working...... I removed all the coverings of the screen and detached and reconnected the two LCD inverter cables connected to the inverter boards thats located just below the screen and then after removing the back covering of the LCD screen, I detached and reconnected the LCD cable just behind the screen. The attachment of this cable is very fragile and flimsy. I've a feeling that this is what caused all the problems. It did seem loose!........
I just bought a new U310 , the system is good as of now , but only issue which is bothering me is that it has a week wifi signal Is there any way to boost up the wifi signal.
View 6 Replies View RelatedIf my laptop turns on, it either freezes, BSODs, or black screens (could be anywhere from the windows loading logo to doing some work on word, etc.)
And if it doesnt turn on, well it does; the hdd light goes on (for a second), same with the battery light (the battery light is fine though), but the screen is black; i can hear hdd activity though and if i throw a cd in there, it spins properly and whatnot, but it just doesnt do anything past the blank screen.
An external monitor doesnt work, and reformatting seemed to have helped abit, but then it just got worse 2 days ago; I can't get past the black screen after I turn it on.
I'm 99% sure its a hardware problem, and I'd be willing to replace whatever it is if I knew what it was, but I dont know if it's the hdd, or the ram, or the video card, etc.
I've also taken the laptop apart; so reseating the ram and hdd doesnt work.
Is it normal that dell.ca would have fewer choices of screens than dell.com? I'm looking at the studio 15, and dell.com lists Hi Resolution/Bright,
glossy widescreen 15.4 WLED display (1440x900) as a choice, which is what I want, but dell.ca doesn't. When I view the system specs though, that choice is listed as on option.
I have a Dell Latitude E6530 and when I plugged in my monitor and keyboard into the docking station, they were not recognized. But I can plug them into the laptop while docked and they are recognized.Â
View 1 Replies View RelatedI have a Dell Inspiron N5010 purchased about 2 and a half years ago. I was just deleting some random programs which I don't ever use, and accidentally clicked on uninstall Dell Data Safe Local Back up.Â
How to reinstall it? I tried to do so by clicking this link [URL] .... but it just came up with an error message.Â
my laptop vostro 3460 won't boot any more. When I turn it on it loads the Dell logo (I suppose it passes the POST) but then it just shows a black page. It could be anything, but I guess that it may have something to do with Windows 8 and the UEFI system. I also would be quite happy to install linux mint and get rid of Windows, but I don't know how to change the boot priority order.
So my questions are:
1 is it a hardware issue ? if not, can I solve my problem easily ?
2 how can I change the boot priority order, to install mint ?
I am looking for xp driver for Dell Wireless WLAN 1397 Half MiniCard (4312bg) (boradcom).
View 3 Replies View RelatedDell Inspiron 1545 with Vista
Slow keyboard response, letters don't keep up with my typing.
Can a dell lcd screen work in non-dell laptops, or do they use a non-standard connection?
View 3 Replies View Relatedwhen i first got my dell inspiron and it was all good. when i set the monitor to shut off after 1 minute of being idle, it did and would not turn on unless someone moved the mouse of pressed a button. however, after i reformatted, the computer monitor would shut off after 1 min but soon afterwards it turns on again by itself, then it goes off again, then it remains on permanently. i recently formatted my laptop again and this problem persists. anyone knows whats sup? im using xp ftw... and my configurations are the same as it was before the reformats so idk whats wrong.
View 9 Replies View Relatedi have just installed dells quickset, someone who have try it before ? (did you like it better then XP energy scheduler)
someone know if "allways on" is the same as (dells) "maxium performance" ?
im wondering if (maybe) Dell quickset gives me little longer battery time then XP scheduler. (maxium battery VS battery (XP)
Why can"t I get the Dell Webcam Central to load on my inspiron 1545? I have downloaded it twice from the support site for my service tag and each time i attempt t install it and it shows a coorupt or incomplete download
View 1 Replies View Related