Dell Inspiron 1545 :: Running Windows 7 Won't Boot
Jul 28, 2012
I have a Dell Inspiron 1545 running Windows 7. I try to turn on my computer, it goes through the Dell logo screen and comes up to a black screen with a blinking white cursor in the upper left corner and will not go any further. I have pushed F2 and F12 during the Dell logo screen, but no way. I have run the diagnostics for my computer, but it reports no errors, everything passes. I have also tried hitting the F8 and Ctrl+F11 keys during the Dell logo screen, but neither of these do anything, I have the OS disc for reinstallation, but because of the computer not going past the black screen with the white blinking cursor in the upper left corner, I cannot reinstall Windows because it will not restart correctly. What do I do?
I started it up and it took 20 minutes to boot Windows. I shut it down and it never booted Windows again. I have run diagnostics and they have either passed or they stop right in the middle and I am back to a blank, black screen.
I have a Dell Inspiron 1545 and cannot get it to boot up windows 7. I foolishly loaded a back up from my old sony without realising it would add sony vaio care and now the computer boots to vaio with an error message of error 12.
I have tried to restore using last good configuration but it still fails.
I have a Dell Inspiron 1545 that doesn't boot successfully. It gets to the screen indicating "Starting WIndows" and then just sits there. I tried safe booting but when it should be displaying windows files that are loading, the screen just stays blank. I tried selecting "Repair" boot but the system just blinks and returns to the window that asks me to select Repair or Normal Boot. (If I select Normal Boot, it gets to "Starting Windows" and that's it.
I checked out the hard drive externally and it appears the hardware is functioning normally. I successfully booted with Hiren's Boot CD. I would like to attempt a RECOVERY but can't get beyond the Repair screen.
Since Dell doesn't provide an OS disk with the computer that would allow me to reinstall Windows 7...
I need disabling my touch pad. I have tried everything but the right way! Maybe it is not possible with this hunk of junk, but I can no longer tolerate it. Inspiron 1545 running Vista? Because every answer I have gotten so far, is from people who have something else and trying to apply the directions that they use. It doesn't work mine.
I lost wi-fi internet on my Inspiron 1545, running Vista (6 or so years old). The network adapter was showing up as not installed or not working. I tried returning to earlier restore point. No good. System restore no good. Finally I reinstalled the Vista OS from disk that came with the laptop. But still no network adapter showing in Device Manager. When I insert Resource CD, the WLAN mini-cards are showing up as installed on the system, but no sign of them listed in Device Manager.
So my question is: how do I install the network adapter, or get the system to recognize it if it's there? There is nothing on the resource CD called "network adapter" to install, and I don't see anything like that to download here on the Dell site. Any thoughts?
Oh, I ran the system diagnostics on the Resource CD. In addition to the battery needing replacing (which I already knew) I got the following:
Error code 4400:011A
Msg: SCSI-0-000_DISK_GENERIC_MULTI-CARD-Target not ready
I seem to have a problem as soon as i unplug my charging laptop. It seems to freeze and screen goes into a frenzy of lines and running bars. I have a dell 1545 and its vital .....
I closed Down the lid to head to my room and then came back about five minutes later, opened it up, and pressed the power button. A flash of a blue screen appears but I can't read what it says on it and then once it tries to load it reverts to a black screen that says "Windows has failed to start up . A recent hardware or software change might be the cause." Then I can either launch Startup Repair or Start Windows Normally.
I have tried both options, ran a hardware diagnostic test twice, tried to restore to a previous date, and tried to boot up in safe mode but each option fails and it just goes back to this black screen with the two options.
The only option I haven't tried is reverting to factory settings but that is because I would like to save my files first.
Could not boot into recovery mode, launch the command prompt and run the following, bcdedit /enum all? I have a friends Dell 1545 and I think the Boot Manager/Loader is screwed up b/c it is not booting into recovery. I can boot to the Windows 7 OS, but we need to do a factory restore because of a nasty virus she has.
My uncle has a Dell Inspiron 1545 with 3Gb RAM, 160 Gb HD and Windows Vista Home Premium. On boot up there is an error message stating that a back up should be performed immediately as the hard drive has a serious problem.
The good news is that I managed to make a clone of the 160 Gb HD to a 1000 Gb HD (Western Digital Blue) using Paragon software before the original drive failed. The bad news is that the cloning process stopped at 42%, but this 42% included the recovery partition and another part of the HD called Dell Utility.
I installed the cloned WD drive and pressed F8 on boot up, but the advanced boot menu did not appear. Instead I get the error message 'no bootable devices'.
I ran the diagnostics program using F5. All the tests were completed and 'passed'. The BIOS recognizes the new drive as 1000 Gb.
Question: how do I boot the laptop? My uncle does not have any recovery media.
I replaced my WD 250GB RPM 5400 with a WD 500GB RPM 7200 and I get a "No boot sector on internal hard drive" "No bootable devices" I have both original disks ( Operating System Windows 7 and Applications.) I've checked the BIOS and it shows the new HDD. I put the Operating System CD in and started the computer than I hit F12 went to CD/DVD and hit enter I received the message "No boot sector on Internal hard drive" "No bootable devices"
My computer is out of warranty. On Thursday, my Dell Inspiron 1525 (bought in 2008) running Vista Operating System was working perfectly. No issues at all. On Friday morning, I went to turn on the computer and the 2 blue lights on the bottom left (the power and the one beside it) light up, the computer sounds like it is going to boot and then it beeps once and dies. It will continue to do this over and over every few seconds until I turn off the power manually.
I have tried the trick of taking out the battery and the cord, pressing the power button and then plugging the battery and cord back in, but it still did not work. The computer will not boot using just the cord (and not the battery) and vice versa.
I'm attempting to enable BitLocker on a Latitude E7440 running Windows 8.1. The system is in UEFI mode with Secure Boot enabled, so I'd like to use Secure Boot for integrity validation. I have the appropriate GPO set, but if I try to enable the TPM protector, I get the following warning event in the BitLocker-API management event log:
BitLocker cannot use Secure Boot for integrity because the expected TCG Log entry for variable 'SecureBoot' is missing or invalid.
This is immediately followed by:
BitLocker determined that the TCG log is invalid for use of Secure Boot. The filtered TCG log for PCR[7] is included in this event.
The system therefore ends up configured with a regular platform validation profile instead of using Secure Boot. Is this a problem with the firmware on the Atmel TPM on the system, or is it something else?
I've had my Dell Inspiron 1545 for a couple of years and it ran fine until recently I noticed that I couldn't update ANYTHING, Itunes, adobe, java, AVG... ect. so when I looked into what could have cause this problem I noticed a lot of the windows updates had failed, so of course I reran the updates and turned my computer off when it directed me too and no luck they still failed I need this computer for school or at least long enough for me to buy a new one.
I have a Inspiron 1545 laptop and it shows a " windows error recovery". The screen reads: windows failed to start. A recent hardware or software change might be the cause. If windows files have been damaged or configured incorrectly, startup repair can diagnose and fix the problem. If power was interupted during startup, choose start windows Normally.
Ok..... now i have two choices to choose from: launch startup repair (recommended) or start windows normally.
I choose the recommended one and it looks like it is going to bootup but shows this blue screen with flowers on it and does nothing?
Then i choose the second option, which takes me back to the error screen!
I have tried taking the battery out, and letting pc start w/o it, hitting the f8 key and trying each solution, System restore won't work, and each fix I read about won't work either. I hate re installing the oS, as I lose everything on my pc.
I turn on the laptop Inspiron 1545 and keep getting an error message that says, "WINDOWS BOOT MANAGER... Windows failed to start.... Then to gives me 3 steps but when I click F8 nothing happens!!! I insert the cd and it takes forever to do a diagnostic check.
I have a Dell Inspiron 1545 running Windows 7 64 bit SP1. Recently I cloned my old original SATA hard drive for a larger Seagate (600Gb). All is fin apart from no windows update and an annoying request to activate. When i try to update I get a message that my service isn't running and I need to re-boot. It is running and a re-boot makes no difference. In System properties the laptop says it is activated but Windows thinks otherwise.
I recently did a factory image restore on my Dell laptop because I couldn't seem to get rid of a virus on my computer. The factory image restore was completed successfully but now windows will not start up. Startup repair says
"cannot repair this computer automatically-
Problem event name- startup repair offline
Problem signature 01: 6.1.7600.163.85
Problem signature 02: 6.1.7600.163.85
Problem signature 03: unkown
Problem signature 04: 21200839
Problem signature 05: Autofailover
Problem signature 06: 3
Problem signature 07:Failure during setup
OS version: 6.1.7600.2.0.0.256.1
Locale ID: 1033"
I performed regular diagnostics on the computer and all tests were passed. I also did a custom diagnostics test on the hard drive and all tests were passed, except for the last test it said "there is no flash drive in the card reader". Which I believe is probably normal?
My computer only came with two disks from the store. One titled 'Drivers and utilities-for reinstalling dell insipron laptop computer software', and the other titled 'Application- for reinstalling cyberlink powerDVD DX 8.3 software for windows 7'. I do not have a cd for windows 7.
I have an inspiron 1545, and recently a message that said "missing operating system" appeared when I booted it up. I tried pressing f8 and control+f11 but neither of those work. I also tried reinstalling my windows 7 but after it says "starting windows" it just goes to a black screen with a curser. I'm willing to restore it completely if its nessecary.
I ran Win7's Upgrade Advisor and got a couple flags on Inspiron 9400's hardware. But I've heard that people have nstalled Win7 on them (with mixed results).
A couple reports on graphics malfunctions, and someone said the Sigmatel drivers were not found.
I wouldn't bother, but I have a couple development projects that require Win7.
Wondering if anyone has had good luck with Win7, and whether there are certain things to watch out for. All drivers work OK? Did you install 32-bit or 64-bit?
I have a month-old dell inspiron 5323 13z running windows 8 that stopped booting yesterday. I had a problem with booting since I got the laptop, namely the boot always stopped and had to press ctr+salt+del to continue the boot process. Dell support recommended the usual things: updating the bios, the OS, resetting the system to factory settings with no effect. Finally, I have decided I can leave this minor annoyance until know when it stopped booting at all after hybernating the system (there was no problem with hybernate before this incident).
So, it displays the dell logo for a short time when powering up, then the screen goes blank but not completely black. After pressing some keys like space a text 'f12 options' is printed in the lower right corner and en empty horizontal bar may appear. Then typing ctrl+alt+del or some random keys the boot may continue and at this point it may be possible to enter the boot menu by pressing f12. So I can change the boot option to uefi or legacy, but neither works. There is no option to boot from USB or anything else (no DVD drive anyway!). So I cannot even try to boot a linux live CD. However, i remember that these options existed before before in the boot order or priority list which is empty now. I can run the pre-boot diagnostics from the boot menu, but it does not find any problem.
I wish to disable the touch pad on my Inspiron 1545 with Windows 8.. I have a Logitech wireless mouse. Currently both the mouse and the touch pad operate the curser. I want to only use the mouse. In Windows 7 the default was mouse only as soon as the wireless interface was installed. This is not the case with Windows 8.
I've been told to go to the Device driver and select the touch pad under Mouse and other pointers. The touch pad is not listed. I've tried disabling the PC Mouse compatible but the disable button is inactive.
i already use a wireless tether to my cell phone as a modem. works great, but when i try to sync btooth i get "not supported by windows" I checked windows support .it says that btooth is in the sware
I have ignored the issue as long as I can but I am too often losing my current state when I hibernate my pc.The screen powers down which makes me think that the hibernation is happening as normal. However I still see the HDD power light remaining active for say 10 minutes.
The computer then throws a blue screen of death and then powers down.When I reboot I get the message Windows did not shutdown successfully. Windows will ask me to upload the crash dump file to Microsoft but I never get any kind of feedback.This process is quite frustrating.
I have Inspiron 15R 5520 running windows 7 .,. In this model i have 3 hotkeys one for settings the 2nd for multimedia the 3rd is for apps i guess only the setting buttons is working what should i do ?
