I was trying to speed up my laptop. Tried to reboot to factory settings as per instructions on web for windows vista
Now got message - No bootable devices - strike F1 to try boot, F2 for set up utility Press F5 to run onboard diagnostics
Tried to put in operating system disk but no luck
I replaced my WD 250GB RPM 5400  with a WD 500GB RPM 7200 and I  get a "No boot sector on internal hard drive"  "No bootable devices" I have both original disks ( Operating System  Windows 7 and Applications.) I've checked the BIOS and it shows the new HDD. I put the Operating System CD in and started the computer than I hit F12 went to CD/DVD and hit enter I received the message "No boot sector on Internal  hard drive" "No bootable devices"
View 3 Replies View RelatedMy M1730 can’t boot to Vista. It says in red “FAILED”. Also says It can’t find any bootable devices. I did do the test (The one where you press F8 I think) more than once.
I just got my Windows Vista Home Premium OEM disc from Newegg today, I left my original dell one in storage back in NY. It can boot from the disc, but it can’t repair my laptop. So is the HDD dead or what? =/
My XPS m-1530 is running XP-Pro, clean-installed via instructions on this forum. It runs perfectly . . . except for one thing.
Every once in a while, especially in the middle of a lengthy download, everything stops and the screen goes right to this message: No bootable devices found.
Error Code 2000-0141. This used to happen very infrequently, but now it is more often and scary. I have removed and reseated the HD twice.
My previous Dell Latitude D630 went out of order (nvidia graphics) so I bought another d630 second hand without hard disk and introduced the "old" hard disk.
Everything works fine (installing drivers...) except the DVD/CD is not recognized at all:
- when in the BIOS, putting the boot sequence to: CD/DVD/CD-RW Drive
the Laptop says: No bootable devices... (It also says that, when I unplug the DVD/CD)
The DVD/CD itself does a short spinning movement when booting, so it seems to have "electricty".
I've upgraded the BIOS to A18 already;
When booting Windows, the drive is missing altogether (the hardware manager does not show it as an unregonized driver; instead the drive is missing altogether)
I understand the DVD, though introduced to the Laptop, is connected via USB - do I need some USB driver update or how can I fix this?
Is there a manual that would tell me how to check cabling or similar things? when I introduce the DVD from the old hardware - which was/is working, it is also not found in the "new" laptop, so I suppose the DVD hardware "connection" is missing??
My laptop suddenly hanged. When I pressed Ctrl + Alt + Del, the menu did not come on. When I repeated, it did not shut down. I manually shut down the laptop. When I restarted, it said cannot find hard disk drive and no bootable devices.
Someone checked it out and they say the drive has crashed. Is it possible the links are loose? Is it possible to recover data from drive?
I have a HP touchsmart envy 15 and I am trying to restore computer to factory default. About 6 months ago, the computer said I could make a boot disc and be able to use that to restore my computer to factory and after I make the boot disc, I can delete the recovery partition as it will be stored on the disc. So I went ahead and make the disc (it turned out to be 4 discs) and the computer deleted the partition. Now I am here trying to use the discs to restore to factory, however, my optical drive isn't detected when the bios is booting. Because of this I need to turn those 4 discs into a bootable USB thumb drive. I have looked all over and there are many different ways of converting 1 disc into usb, but not 4.
View 1 Replies View RelatedI experienced my first BSOD today on my 5 month old Inspiron. I was a little concerned but figured it'd be find and just restart. However my laptop never restarted, instead I was greeted by 'no bootable device found. Press any key to restart'
Now I've browsed the Internet and taken a few steps, firstly I ran the diagnostics in the bios and it was saying my hard drive wasn't installed. Then I followed a guide on this forum. I changed the Sata from ACHI to Intel Smart Technology, however now I'm unable to get back into the boot settings and instead my laptop just stalls on the Dell boot up screen.
All this has literally happened out of nowhere today, I run my own business and I rely heavily on my laptop. I can't afford to lose any documents. I'm baffled how it can just malfunction out of nowhere.
I am having a problem on my Inspiron 17R SE. I accidentally wiped out the mSATA partition with Disk Management. After trying to recover the partition(failed), I am thinking maybe I could re-format the mSATA SSD and reinstall Windows on it. I have not shut down the laptop and I have backed up all my files. What can I do next?
View 7 Replies View RelatedI have got a inspirion 1545 and when i boot it up i get the message "no bootable device found please reseat the drive" ?????
View 5 Replies View RelatedSo, I desperately need the SSD speed.Â
I know i can use the intesl caching stuff, but i dont want to!!
Intel® Smart Response Technology: This technology utilizes the speed advantage of SSD in caching where the frequently used information is stored on the SSD instead of the Hard drive.
Intel® Rapid Start Technology: This technology enables the system to boot back with-in seconds after getting into hibernation.
What i am looking to do is, put a 128GB mSATA SSD drive in the slot, fire windows into in and use this as my OS & APPS drive, (Drive C:), and then use the existing drive, the 1TB mechanical drive as the storage drive (Drive D:).Â
The dell site, say i can not use an MSATA SSD to boot with...i see no reason why!?
Also, i cant find the spec of the mSATA...dont know whether its SATA 3 or SATA 2.
I'm looking for a downloadable recovery image for a Dell Inspiron 15R 5520 Windows 7.  I had Linux on it since I bought it and now the wife wants to sell it and need to re-install windows.  I deleted the recovery partition also, so I'm stuck trying to find a bootable installation disc.
View 1 Replies View RelatedI bought a new Dell Inspiron 5547 from US.From past ten days its sayings No Bootable device found error while starting.I've checked BIOS setting HDD is not detected.But after few hours I'm able to open it.After few minutes the disk space reaches to maximum due to svchost.exe process.
View 6 Replies View RelatedI have three usb ports, and none of them seem to be working. Although the devices work on my roommate's laptop, they are not recognized on mine. When I plug my flashdrive into hers, it lights up, but that doesn't happen on mine. I recently reset my computer to factory settings to try and fix other issues including the problem with the usb ports, but the usb devices are still not recognized.
I recently sent in my laptop due to problems of it not being able to turn on, and my battery and a/c adapter were replaced. I was quite happy. However, I do not want to send it back in even though it is under warranty. Since I am a college student, I really need my laptop. If nothing works, I'll send it back in over winter break so I'm not without a laptop during my studies.
My touchscreen is also not working, so how to fix that, here is my other post: [URL] ...
I have bought a Inspiron 5421 laptop last week during IT show 2013 Singapore. I found that one of USB port next to DVD drive does not fit any devices. Also encountered Error message when insert a wireless mouse receiver in other USB ports.
View 1 Replies View RelatedI purchased dell Inspiron 3520 with Linix OS. i formatted and installed Windows 7 home premium. downloaded and installed all driver files from dell website. no device is unidentified in the device manager. everything is fine except the blue tooth. Device manager shows bluetooth as working and i can click the bluetooth icon in system tray. but strange thing is it wont detect any Bluetooth devices. another issue i observed is that when i try to install a Dell device driver for blue tooth it will generate an error message "Activate Bluetooth Using Wireless Switch". i tried FN +F2 key but it works with wireless only. i tried PC health checkup utility . and all kind of checking. checked bios whether Bluetooth is disabled. i could not find option to enable bluetooth. tried windows update.
View 5 Replies View RelatedI have recently purchased a laptop Dell Inspiron 5520, & all of its USB ports are USB 3.0, so i am unable to connect my USB 2.0 devices. May i know what exactly must be the problem?? or is it that i can't connect USB 2.0 devices on USB 3.0 ports??Â
View 3 Replies View RelatedI have done a search on this so forgive me if its been addressed already. I found no answers.
I have seen taht a number of Inspiron 1720s have the 8600m GT card in them with 512 mb of memory, while others such as mine have the same card, but with 256mb memory on them.
I'm getting ready to start doing some photoshop work as well as some CAD work. I'm going to start my engineering degree as soon as I finish my current degree. Would this increase in memory help out in what I will be doing?
Will it also help in gaming? I pretty much use this laptop for everything and am trying to learn what I can about it so I fully understand it's capabilities and such.
I am stuck looking at a black screen. Also, when closing the lid I am unable to open the lid and restore my previous session.
Although I am not sure if this is directly related but it seems to only deter me from restoring the session if the computer has been plugged in, otherwise the laptop comes back exactly as it was.
I have tried reinstalling the video driver twice, both times doing a complete clear and removing all registries tied to them
I am having problems with the touchpad on my laptop. When I am in the middle of typing I have to watch because it will begin typing where my cursor was laft on the screen. I have to be very careful because I barely touch my touchpad and the mouse will click. I have tried to figure out how to turn the sensitivity down but I cannot find it in the devices. It tells me no devices were found when I click on the mouse folder. I have tried and tried but I cannot find anywhere to change the settings for the touchpad. when I am trying to type a paper and I look up and half my paper is in the middle of a different section or it just hasn't been typing because I have clicked out of the screen.
View 1 Replies View RelatedI was bored tonight so I ran some benchmarks on my 1720, Specs in Sig
Only change was the GPU was overclocked.
1st Pic is 3DMark @ stock clocks.--------3449
2nd Pic is 3DMark Overclocked-----------4366 Old 4259, 4271, 4280
3rd Pic is Vantage @ stock clocks--------P1115
4th Pic is Vantage Overclocked-----------P1457 Old P1410
I didnt get time to finish a Vantage run on my last set oc clocks since it needed tweaking due to display driver crashes. GPU temps never reached higher the 67*C when overclocked
Whenever I close the computer it will crash. Upon re-opening it I am greeted with the BIOS loading screen and the the message telling me my computer was not properly shut down.
I'm not really sure why this happens. If anyone has had this problem and knows how to fix it ....
my friend bought a new inspiron 1720 with an 8400m graphics card and he is trying to play counter-strike and it sucks so he wants to replace that with a different a better graphics card what are his choices, does he have the opportunity to put like a 7900 gs or no
View 10 Replies View Relatedanyone run a benchmark utility such as Lavalys Everest or Sisoft Sandra or similar to tell me the name of the manufacturer of the Firewire chipset in the Inspiron 1720 please? Not the motherboard or CPU chipset, just the firewire component of the laptop, please.
The benchmark software is free, and they tell you what components are inside your particular computer.
Reason I'm asking is that I have an external firewire soundcard (for professional music recording), and for maximum compatibility the soundcard manufacturer recommends the soundcard only be used with certain firewire chipsets.
I was wondering if it is possible to install Vista Ultimate 64 bit so that I can dual boot with the Vista Home Premium 32 bit my inspiron 1720 came preinstalled with.
Also, can I load an operating system from an external hard drive?
i just bought a new dell laptop 1720, dual core T5250, 2gb memory, and nvida geforce 8600 gs, and im trying to play some source but its really laggy, i dont know if its my internet or what but im getting about an average of 50 fps, and my internt coneection i ested is download speed at 4922kbps, and upload speed at 489kbps.
View 10 Replies View RelatedLast night, I opened my Dell Inspiron 1720 (specifications in my signature) with the help of this website, to clean it.
I opened it till this step -
I cleaned this part, and vacuum cleaned the body. There was so much junk ....
i think something is wrong with my windows or my hard drive failed, can't figure out which one.
In one scenario when i start windows normally it says i can't load a registry file and refuses to continue
The set up are as follows:
T9300
8600M GT
320GB 7200rpm x2 (640GB)
6GB RAM
(4GB G.Skill and 2GB Kingston memory) both PC2-5300 @ 5-5-5-15
Ultimate 64
1920x1200
A09 BIOS
Purchase of RAM
The 4GB RAM Module is purchased from newegg. Unfortunately, newegg doesn't ship products to Singapore, so I had to use Vpost (Vpost gave a US address and everything)... Then Vpost will ship it to Singapore.
This is a follow up thread from Does the Inspiron 1520 Support 8Gigs and How to upgrade your M1530 to 6GB of RAM
Installation procedure:
As usual, I only installed the RAM on DIMM A. I have not tested it on DIMM B, not too sure if it works or even to the extent of the BIOS or mobo detecting it.
UPDATED (Friday, Oct 3, 2008; 11:52am): DIMM B also works. See this screenshot for details.
I got myself a black keyboard. Just ignore it. No, it's not an Inspiron E1705 people. My friend from the UK (Migrated here, now living in Singapore) didn't want his Vostro 1700 anymore, so for no reason, he gave me the keyboard.
As usual, open the hinge cover and gain access to the DIMM A RAM underneath the keyboard. Instructions can be found here: [url]
Make sure you slot it properly into the slot...
Once fixed, especially the keyboard and hinge, boot into your BIOS to double check it. Here, it is written as 6142MB.
Also, make sure you're using the latest A09 BIOS released from Dell.
Testing
Things just don't stop here. Just because it "sees" or, "detects" 6GB of RAM, doesn't necessarily mean we can assume that the 6GB will be utilized because, it is widely stated that the 1720 cannot support more than 4GB of RAM, and so as most Santa Rosa machines. The same goes for the others. Here, I did some interesting "Mythbusters" style tests... I got lots of drawings and graphics that I do everyday, like 3DS Max and all those workstation stuff. But specifically, I am going to launch 2 of the most vicious RAM eaters out there. They're non other than Photoshop and Corel PhotoPaint.
Tuesday 8 Oct 2008 11:17am UPDATE: VMWare Workstation v6.5 will be tested!! This will really help to see if there's a performance boost with 6GB RAM installed, and be utilized..............................
So I've had the laptop since Aug 2007, works great, specs in sig. Only have one problem with it. the laptop likes to punish me. It shocks me. Literally shocks me. I think it's where the paint as worn off on the base. Around the corners, the bottom, ect. If I have it on my lap I need to make sure I don't wear shorts. I can feel a slight amount of electricity sting my legs, or forearms. It's a slight stinging sensation. Anyone else experience this? It's been going on for a little while. I thinking the only fix would be to A) repaint it or B) get a new base for it. Don't really want to repaint it as it might look crappy. Other than HDD issues from time to time, I've never had a problem with it and it's still my main computer.
Anyone else encounter this? Could it be that I have a pinched wire thats exposed and making contact with the base? If any, I think it would be the monitor wires, I seem to recall them being nicked and exposed.