Dell Inspiron 17R 5720 :: MSATA SSD As Bootable Drive
Jan 30, 2013
So, I desperately need the SSD speed.
I know i can use the intesl caching stuff, but i dont want to!!
Intel® Smart Response Technology: This technology utilizes the speed advantage of SSD in caching where the frequently used information is stored on the SSD instead of the Hard drive.
Intel® Rapid Start Technology: This technology enables the system to boot back with-in seconds after getting into hibernation.
What i am looking to do is, put a 128GB mSATA SSD drive in the slot, fire windows into in and use this as my OS & APPS drive, (Drive C:), and then use the existing drive, the 1TB mechanical drive as the storage drive (Drive D:).
The dell site, say i can not use an MSATA SSD to boot with...i see no reason why!?
Also, i cant find the spec of the mSATA...dont know whether its SATA 3 or SATA 2.
I am having a problem on my Inspiron 17R SE. I accidentally wiped out the mSATA partition with Disk Management. After trying to recover the partition(failed), I am thinking maybe I could re-format the mSATA SSD and reinstall Windows on it. I have not shut down the laptop and I have backed up all my files. What can I do next?
I have a Dell Inspiron 15R (5520, Mid 2012) and I would like to get faster storage. Can this laptop support a mSATA drive? I have read different answers and I am confused if mSATA SSDs are supported or not. mSATA is not mentioned at all in most of the Inspiron 15R 5520 manuals. However, the "Inspiron 15R 5520 Specifications (Accessibility Compliant)" at ftp.dell.com/.../inspiron-15r-5520_Reference%20Guide2_en-us.pdf says this:
mSATA (optional)one mSATA port that supports up to 32 GB (Inspiron 14R-5420/7420)one mSATA port that supports up to 32 GB (Inspiron 15R-5520/7520) 32 GB seems very small. Is there a reason why I couldn't use one of the larger mSATA devices on the market, such as the 128GB or 256GB mSATA devices?
I replaced my WD 250GB RPM 5400 with a WD 500GB RPM 7200 and I get a "No boot sector on internal hard drive" "No bootable devices" I have both original disks ( Operating System Windows 7 and Applications.) I've checked the BIOS and it shows the new HDD. I put the Operating System CD in and started the computer than I hit F12 went to CD/DVD and hit enter I received the message "No boot sector on Internal hard drive" "No bootable devices"
I have a HP touchsmart envy 15 and I am trying to restore computer to factory default. About 6 months ago, the computer said I could make a boot disc and be able to use that to restore my computer to factory and after I make the boot disc, I can delete the recovery partition as it will be stored on the disc. So I went ahead and make the disc (it turned out to be 4 discs) and the computer deleted the partition. Now I am here trying to use the discs to restore to factory, however, my optical drive isn't detected when the bios is booting. Because of this I need to turn those 4 discs into a bootable USB thumb drive. I have looked all over and there are many different ways of converting 1 disc into usb, but not 4.
My laptop suddenly hanged. When I pressed Ctrl + Alt + Del, the menu did not come on. When I repeated, it did not shut down. I manually shut down the laptop. When I restarted, it said cannot find hard disk drive and no bootable devices.
Someone checked it out and they say the drive has crashed. Is it possible the links are loose? Is it possible to recover data from drive?
I would like to know if a USB drive can be made bootable using Windows 7 Re-installation DISC given along with my Dell 1558 Laptop and can be used for clean installation of Windows 7.
Just installed a new har drive into my Compaq CQ57. Ordered the recovery disks from HP. Put the first disk in disk drive as instructed and turned power back on. Now I'm getting a "No bootable device - insert boot disk" message. I thought that was what I had gotten from HP? how to recover system and then reinstall Windows 7?
i have Thinkpad e335, BIOS ver. 1.70. I Read, that e335 doesn't support mSATA drive. In BIOS i can choose bootable device: HDD0 - 500GB HDD or HDD1 - empty. What is HDD1? Can i use HDD1 for mSATA drive?
I experienced my first BSOD today on my 5 month old Inspiron. I was a little concerned but figured it'd be find and just restart. However my laptop never restarted, instead I was greeted by 'no bootable device found. Press any key to restart'
Now I've browsed the Internet and taken a few steps, firstly I ran the diagnostics in the bios and it was saying my hard drive wasn't installed. Then I followed a guide on this forum. I changed the Sata from ACHI to Intel Smart Technology, however now I'm unable to get back into the boot settings and instead my laptop just stalls on the Dell boot up screen.
All this has literally happened out of nowhere today, I run my own business and I rely heavily on my laptop. I can't afford to lose any documents. I'm baffled how it can just malfunction out of nowhere.
I'm looking for a downloadable recovery image for a Dell Inspiron 15R 5520 Windows 7. I had Linux on it since I bought it and now the wife wants to sell it and need to re-install windows. I deleted the recovery partition also, so I'm stuck trying to find a bootable installation disc.
I bought a new Dell Inspiron 5547 from US.From past ten days its sayings No Bootable device found error while starting.I've checked BIOS setting HDD is not detected.But after few hours I'm able to open it.After few minutes the disk space reaches to maximum due to svchost.exe process.
I just bought an ultrabook dell inspiron 14z with msata 32 GO cache + 500 GO hard drive. But I would change my mSata 32 go cache by another mSata 60 GO. I would like this disk doesn't work in cache but like a real SSD with Windows on it.
How can i disassembly the laptop ? I'm stuck with a part near USB port on the left.
I have a Dell 5720 and in the summer, its motherboard and keyboard got replaced due to short circuit problems. Since then, every time I press the Power button, the laptop starts to load correctly but suddenly turns off during the boot process. If I press the Power button on a second time, the laptop loads perfectly.
I have Windows 7 and Ubuntu installed and the booting process reaches the grub where I can select in which one I want to boot. I can even select something from the list, but then the laptop turns off (not because I select something, but I think because I have a few seconds before it shuts down). If I turn it on again, everything is fine. I can select anything from the grub's boot list and it won't turn off. It boots into any desired OS and works like there's no problem
I've just run hardware diagnostics and all tests passed.One of my friend said that it has a driver problem because the motherboard got replaced and this is why it's shuts down the first boot.
Another observation: if I do this 'twice turn-on' boot and use my laptop for a while and I turn it off and I turn it on again in a short time after the turn off, it boot correctly.
I have Dell inspiron 7520SE laptop which has two configurations with mSATA connection and preinstalled mSATA card and without mSATA connection. Mine is without preinstalled mSATA card, but I found in bios
mSATA Device : [Not detected]
So does that mean my laptop supports mSATA (but it is empty) or this is just some error, and is there a way to check if my laptop has support for mSATA withou pulling it apart ?
after installing win 7 in my dell a lost bios setup.I press F2 key at splash screen Dell but nothing happens. I update the fitmware of my bios with the last version but nothing again.
The hard drive of my inspiron 17R 5720 got broken and all the info was lost with it (including the windows 8 image to restore) so i purchased a new HD, but obviously I cant restore the OS that came with my laptop,
How can I get the Restore Image again? can I download it from somewhere?
II bought my laptop 2 months ago and one day when I turn a message appears that says "Your battery is temporarily disabled. Please turn off your computer and try again When the unit is back to the operational temperature".And just let me choose 2 options to continue or enter the bios.I update the bios to the latest version and change my battery, nothing has solved my problem. when I unplug the AC adapter, the computer shuts down. Is a Dell inspiron 5720 with windows 8 64bits.
I let a family member borrow my laptop and it came back with cryptowall2.0 and another one (cant remember which one it was) because they had somehow disabled my antivirus (panda pro) and my anti-malware (malwarebytes). But i got the infections themselves removed and cleaned but my files are still all encrypted. No big deal, MOST of the important stuff was backed up online and on flash drives. Tried restoring to a previous point but didn't work. So now i can't access my admin account AT ALL. I can log into it but the screen stays black with just the pointer. I can log into the guest account.
But i can't do ANYTHING from there and put it that way on purpose. How do i fix this??? Will a factory restore fix the damage from the ransomware infections??? Is there ANY way to save my files? Well, i guess none of that matters if i can't get into the admin account first... This is the ONLY computer i have access to, i can use my smartphone for accessing information and whatnot but connecting drive to an external drive on a secondary computer is out of the question....
I would like to add a mSATA card to my system to be able to use IRST.
I am skeptic because I have read online that systems which were not shipped with 32 GB mSATA card, doesn't have mSATA port for later installation.
When I purchased the system at that time dell had the option for adding 32 GB mSATA card in the customization section, but now dell has removed the whole customization section from the website. And in the pre-configured models, there is no option for mSATA card.
The Nvidia driver for my Inspiron 5720 does not recognize my card and won't install. It is the 630M.I did a clean format and set BIOS values to default. The latest BIOS is installed.The drive is from Dell's website.
Ok, so I have this laptop (17R 5720) that I got in November. Um every time I turn it on, I get a blank screen just after the dell logo pops up.
I've tried taking out the battery and unplugging the adapter and holding the power button for 30 seconds and putting the battery back in. I've tried "D" + power, tried Fn + Power, tried F2 to get to the BIOS window, and I've tried F12 (which only got me to the Boot menu). Still nothing happens.
Don't know what else I can do. It looks like I only got limited access to technical support so I hope it's nothing major that I have to deal with.
