Dell :: M4400 Not Standby Correctly When In The Docker
Mar 12, 2010
I have an M4400 running W7 pro x64, and at work I have it docked and use both the laptop screen and an external screen (don't know if that matters).
Sometimes, not always but quite often, when I put it to sleep (aka standby) by using the start menu command, it behaves as if it goes to sleep, the screen blacks out etc, but it doesn't really.
And I realize this when I've arrived at home and pick it out of its bag, it is *hot* really hot and still running.
View 3 Replies
ADVERTISEMENT
Feb 16, 2009
I have a Dell XPS M1530. Since I am a college student, and when I usually leave class, I just close my laptop.
let it go to sleep, and put it in my bag. The problem lately has been that when I close my laptop, it does not go into sleep mode, even though it is set for it to do this.
It will do this on both battery and AC power. I will put it into sleep overnight so it is in sleep when I put it in my bag in the morning.
And once last week I put it in there thinking it was a sleep and then 3 hours later while I was at work,
I had not brought it out yet, and opened my bag and the laptop never turned off, it had been running the whole time and was hot, and had 22 minutes of battery left.........
View 3 Replies
View Related
Jan 1, 2009
i am experiencing a weird problem, it just happened like 2 weeks ago, and i been looking all over the place to find out how to fix this problem, but the problem is that the little green "bar" under my hard drive in my computer is not showing,
it just shows empty like if there is nothing in my C drive, here is a screenshot of my computer to clarify exactly what im talking about, and i put little red arrows pointing towards exactly where the "bars" are located ...
View 5 Replies
View Related
Feb 5, 2015
I have a cannon Pixma MX870 printer which works very well with my Inspiron 530 desktop (windows vista), but my Inspiron laptop 1545 (windows 7) is not able to scan, nor can I do it from the display on the front of the printer.
View 1 Replies
View Related
Dec 29, 2012
Dell Inspiron 7720Bios V. A07Windows 8.
Today when I booted up my laptop, it shows the Dell logo and goes to a screen that only shows me a few things. It says "Boot mode is set to:UEFI; Secure boot:ON" Then there are two categories, "UEFI BOOT: Network" and "OTHER OPTIONS: Setup, Diagnostics, Change boot mode settings" I ran the diagnostics in ePSA and it said there's something wrong with the video card. It gives error 2000-0332 - "Video memory -Video memory integrity test discrepancy"... when I searched for this code, it said the solution is "Flash latest BIOS, retry diagnostics."
View 15 Replies
View Related
Oct 25, 2007
when I got the 1730 from Dell, right out of the box I was getting 15,500 on 3DMark05. I installed Dell's 'new' driver on their site and it lowered to around 15,000, so I rolled back to the original 'pre-release' driver and it popped back up to the original scores (this is stock, non-overclocked, btw...when CPU is cranked to 3.4Ghz, it gets ~17,000). This was dandy, and I was very happy with the performance of pre-release drivers.
So many games didn't work with Vista, or else worked badly (i.e. crashes), that I decided to reformat and put XP on there. Well, I figured I'd put the video drivers from Dell's Reinstall CD on there, thinking these were the same 'pre-release' drivers that were allowing the better scores in Vista. BOOM: I get 10,000 in 3DMark05, a 1/3 performance decrease! Believe me, I tweaked the driver settings just like I always do...SLI is definitely 'enabled' in the driver page, but the computer performs as if it is DISABLED. So, thinking it's a driver issue, I upgrade to the 'new' drivers on Dell's Support site, and BOOM: same issue. I'm so pissed off right now, I can hardly type, as this is LOWER than my 1710. For $4000, I could have bought a lot of hookers and coke, so this laptop may be going back with extreme prejudice if a solution isn't found in the next five to seven days.
There are threads about this in other forums around the net, but none of them I've found have any real workaround or solution other than 'we'll have to wait for Dell or Nvidia to properly support SLI.' Even the 'pre-release' driver on the system when it ships is not available for download anywhere, and I believe it's Visa-only anyway. Does anyone have a solution for this problem? Hell, is anyone else HAVING this problem? I PM-ed Progneta yesterday, because I thought he had had the same issue and fixed it, but the more I thought about it, the more I figured a separate thread should be started concerning this problem, since it's pretty basic and very crippling. SOMEBODY at Dell should have caught this, since I know for a fact the engineers over there EXPECT people for format their machines when they get them (i.e. this is marketed to an enthusiast crowd, and they know it).
View 15 Replies
View Related
Dec 8, 2014
I'm bought laptop dell vostrol 5470 in Aug 2014. My laptop use windows 8.1 64 bit.Recently, I have a problem with my keyboard.
- when I press shift key left, my lappop is displayed letter 'SFJL' or 'SFJLk' on Microsoft Office
- when i press shift key right, my lapptop is turned on Caps lock
I have connected with another key board [key board for desktop]. It is not operated.I have opened soft key board and click shift button [left/right]. It's operated normally..I can not input some letter such as shift + 2 = @, shift + 3 = #... So what happen with my key board, and How can I repair it.
View 2 Replies
View Related
Nov 8, 2014
Sometimes when I boot up my Dell XPS 12 laptop the keyboard doesn't work correctly. Certain keys don't type letters, sorta like the CTRL key or Windows key is stuck down. I have tried a lot of different things (pressing various keys, checking system logs, check keyboard status, etc.) and the only thing that works is to reboot the laptop. Most of the time this fixes the problem, but it is annoying to have to reboot when this happens. I have upgraded the drivers to the latest versions available on the Dell website.
View 1 Replies
View Related
Jan 29, 2013
I am having an issue with 3 devices not being installed correctly. I am working a 32 Bit Operating system, Vista Business.
The main problem that I am noticing is that I do not have WIFI avail at the minute, but I do not know which of these devices is the issue.
They are:
Base System Device (Hardware ID)
PCIVEN_1180&DEV_0843&SUBSYS_024F1028&REV_11PCIVEN_1180&DEV_0843&SUBSYS_024F1028PCIVEN_1180
&DEV_0843&CC_088000PCIVEN_1180&DEV_0843&CC_0880
Network Controller(Hardware ID)
PCIVEN_8086&DEV_4232&SUBSYS_13218086&REV_00PCIVEN_8086&DEV_4232&SUBSYS_13218086PCIVEN_8086
&DEV_4232&CC_028000PCIVEN_8086&DEV_4232&CC_0280
Sm Bus Controller(Hardware ID)
PCIVEN_8086&DEV_2930&SUBSYS_024F1028&REV_03PCIVEN_8086&DEV_2930&SUBSYS_024F1028PCIVEN_8086
&DEV_2930&CC_0C0500PCIVEN_8086&DEV_2930&CC_0C05
View 4 Replies
View Related
Nov 15, 2011
Recently began recollecting drivers needed for Latitude E6410 Win 7 32 bit fresh build, and found some descrepancies. 1 "How to Download and Install Drivers in the Correct Order" (Dated 8-14-2006) on the Latitude E6410 driver page states that for number 8 the Dell ControlPoint software Says it is located in "Applications" when itis in fact under Dell Control Point. It Suggests installing the following:
-Control Point System Manger
-Control Point Security Manager
-Control Point Connection Manager
But in fact the only 2 available are Control Point System Manager and Control Vault (A little confusing). Also, under System Utilities is the PDF E-Family How-To Reimage Guide Which is marked urgent and I use for recreating images. It states that the Driver that has to be installed (Prerequisite to other DCP ) is Dell Control Point Security Driver Pack. Which is no where to be found. I heard toady from "Ronnie" at Dell Tech services via phone that I should use Dell Data Protection (Instead of Dell Control Point) but can find nothing on the correct order or how and when to install it.
Is there anyway to get an updated Latitude E6410 Win 7 32bit Correct order (And which ones) Driver install list?
View 1 Replies
View Related
Dec 24, 2014
For some reason my Dell INSPIRON N5110 is not booting up correctly. When I start it up the screen remains black for some time and starts to beep 4 times. I did do my research and knw that it is a read / write RAM error according to the beep code table for dell laptops. I did attempt to change the RAM sticks but it didnt work.
View 4 Replies
View Related
Mar 18, 2013
After turning on the laptop, the CD/DVD drive doesn't work though I push eject button and I can't insert a CD / DVD, but after executing "run test" from Pc checkup / My Dell support center it works ( ejects for inserting CD /DVD ) - The Drive is TSSD corp DVD +-RW SU-208 BB.
I have called Dell technical support for 2 times and even they updated the bois ,.... but still I have the problem.
View 4 Replies
View Related
Dec 8, 2009
I know iTunes is full of bugs and I'm really starting to get annoyed but this maybe the straw that puts me over the edge to finding an alternative. I've tried 2 different brands of CD's and even one that was a friggin "Sony CD-R". Still when iTunes burns my disks it'll finish like normal and mount the finished product in the sidebar, and upon first inspection it looks fine but when I play through the CD all the ends of my songs are cut off and some skip and then some are just plain not there (towards the end of the disk).
I've looked at the individual song properties and none of them specify a start or end time and I'm at a loss as to what to do. I know CD's aren't expensive but when I only burn like 1-2 a month, and I buy a five pack and it messes them all up that's money I'm just "burning" (pun intended). Could it be a problem with the buffer under-run? In that case it's HW and I'd need to RMA it to Sony... or is there some special tool I can use to see if I can calibrate the drive or something? the drive in QTS is an Optiarc BD-ROM BC-5500S4 with the released firmware update.
View 3 Replies
View Related
Aug 19, 2009
I have a dv2550se with windows xp installed. (Before it was vista but i reinstalled it).
However, the DVDRW is not being recognized as DVDRW. When I go to My Computer it says that its a DVD-RAM drive. So basically I can't write anything . I tried uninstalling the driver in device manager but still nothing.
View 3 Replies
View Related
May 6, 2009
Cannot enter standby in the Studio XPS 1640, Windows Vista 64 bit.
Whenever I click on standby, the computer acts as if it will go into standby, but then goes immediately to the login screen again.
View 3 Replies
View Related
Nov 3, 2009
Does anyone know how much energy Dell's latest laptops use when in standby mode? I've tried looking on their website, but I can't find any definitive figures (I'm using a Precision M4400, if that helps).
Before I always used to hibernate or shutdown my laptop to save energy, but I'm curious if standby mode really uses much power or not.
View 3 Replies
View Related
Nov 12, 2009
i had this inspiron 1520 for a while now and everything is good but for the last 3 months,
my has been standing by when the bar hits 55%. i've checked the battery settings and it's supposed to alarm me when it hits 10% and only standby at 5% but idk why it's doing at 55%.
View 3 Replies
View Related
Feb 20, 2009
I just got my new M6400 and I cannot get it to goto standby or hibernate. I get the "Preparing to standby..." dialog and it just hangs there.
BIOS A03
NVIDIA 2700M 6.14.11.7653
XP Pro SP3 .....
View 6 Replies
View Related
Dec 9, 2014
I got an inspiron 11 on Friday. I started noticing that sometimes the touchscreen wouldn't work correctly. Sometimes It takes a few taps to register a touch, other times it just quits working for a few seconds. This makes it hard to do anything, and makes it completely impossible to play any touchscreen games.
After a couple days, I finally figured out that It was on battery power that I had the problems. When plugged in the touchscreen works perfectly.
I have downloaded all the dell upgrades, and windows upgrades. I've also tried to turn off all the battery saving options I could find. Under power options advanced screen I changed every option to the same for plugged in and on battery. I turned off the option for dells power saving features. In device manager I took away windows ability to put usb hub asleep. There Is probably more I'm forgetting. Basically everywhere I seen a difference between battery and plugged in, i changed.
It passes all the hardware checks, both through dell software, and on the bootup hardware check.
I use this in tablet mode 90% of the time. And returning it to laptop mode to use touchpad/keyboard just isn't acceptable
View 2 Replies
View Related
Jan 4, 2015
dell 5547/win 8.1 touchpad left click not responding correctly randomly, not all times, left click not work and both clicks respond as right click sometimes once or twice a week….or two or three times a day.
latest driver updated and also driver uninstall and re-install OS format and reinstall but problem still there.
View 2 Replies
View Related
Feb 15, 2013
So I just had Windows 7 reinstalled as my harddrive died. But after the reinstall, Windows 7 only detects my laptops native resolution (recommended resolution) as 1280x800.
I know this laptop has the 1440x900 display, I have coworkers with the same laptop and their display shows the "recommended" is 1440x900, and I know that was the case before I lost my drive and got a new one with a reinstall.
This laptop has the NVIDIA Quadro NVS 160M adapter, and I have the latest driver for this from NVIDIA.
Why does windows think my native resolution is 1280x800. I can use the NVIDIA driver to force it to go to 1440x900, which works. I was just wondering why it is doing this. Is there some inf package that I need from Dell?
View 1 Replies
View Related
Feb 4, 2009
I've been having major problems browsing the internet lately. Safari won't stay open for more than 2 minutes without crashing and Firefox will half the time not format web pages correctly. For example, as I'm typing this in FF right now, in my tool bar up above this text box I have the boxes with bold, italics and underline options showing, but I can't select them. Even worse, the rest of where boxes should be just have text, for example it says Align Left, Align Center and Align Right instead of having selectable boxes. What is up with my browsers?
View 6 Replies
View Related
Nov 23, 2014
I have an HP Pavilion g7-1368dx laptop with Windows 7 that I purchased in June 2012, so it's out of warranty.
A couple weeks ago it had a thermal shutdown one time during use. After cooling down, the laptop functioned fine for a few uses, but then it started giving the startup warning message, "The system has detected that a cooling fan is not operating correctly," with additional indication about potential damage if the computer is operated in that condition.
I ordered a new fan and replaced it, and I cleaned the fan grill in the process (though it wasn't incredibly dirty), but I still get the same fan error message. I went to HP's website and saw the suggestion to do a "hard reset," so I did that, but the problem still persists.
I saw another suggestion of trying a BIOS update, but I figured that wouldn't be advisable since the fan isn't working. Would going through with the BIOS update attempt anyway?
View 6 Replies
View Related
Aug 16, 2014
I have recently purchased HP 15R 036TU Laptop. Its function keys are not working properly. Like if press F2 it adjusts brightness instead of changing folder name. What change in setting are required.
View 3 Replies
View Related
Sep 18, 2014
I'm just reinstalled my windows to Windows 8.1 64 bit, but all drivers not working correctly. I can't find the real drivers.
View 5 Replies
View Related
Oct 3, 2009
I was trying to update my drivers, I went to dell website and got a few update for my drivers, but now, my computer won't go into standby or hibernate. If I try to go into standby, after I see the "preparing to standby" my computer goes black and the on light still on, then I can't wake the system up I have to press and hold the power button and reestart. When I try to go into hibernate mode after "preparing to hibernate" I see a blue screen with that says something like "an error has happened and windows has been shut down to prevent damage to my system, the problem could be caused by a new software or driver... etc" After I restart it says, your system has recovered from a serious problem and then it ask me to send a report error, I do and then my web browser and open this: [url]I know the problem was a driver that I was trying to update to make my computer work better but instead it messed up. How do I undo the updated drivers?
View 9 Replies
View Related
Nov 23, 2009
The last day, I close the lid and the computer, theoretically, enters way sleep (or standby.).
On having turned to open the lid, the PC it was in StandBy but it does not wake up
I have tried all the keys, even I have turn off the laptop and turn on but it not wake up The screen is displayed black, without cursor, characters...no displays anything!
CD-Rom drive not runs either.
The laptop is in "sleep" eternally!
View 12 Replies
View Related
Sep 6, 2009
I upgraded my Studio XPS 13 to Windows 7 Pro RTM and Im using the latest NVidia drivers for my 9400M. Problem is that occasionally, going into or coming out standby does not work. Going into standby,
the screen may blank out and there is constant hard drive activity, but the system never powers off. Or, coming out of standby, the screen is just blank. Most of the time it works ....
View 9 Replies
View Related
Aug 14, 2007
I have a dell i9300 and I want to know what i should do with it overnight. I have been turning it off at night and then turning it back on when i wake up. I am not to concerned with the effects this may have on the battery, I am more concerned with the effects it has on the computer itself. What should i do to ensure the optimal longevity of my notebook.
View 15 Replies
View Related
Oct 11, 2009
I have a Dell XPS M1530 Laptop (T8300, 3gb, 8600M GT, wifi-n, dual-boot Vista+XP, ...), and 4 times out of 5 , when I want to put the PC in StandBy mode, it reboots.
Obviously, it gives me the " Windows did not shut down properly ; Start in Safe Mode/ Safe with Network" etc etc screen, and you can understand I find this pretty annoying. It also does so when I put it in hibernation mode.
It does so only with Vista, and it never did with XP. I just reformatted (the Vista partition) and installed + updated every Vista component and it still does it.
At first I thought it might have had a link in applications being open and me standing the computer by, but figured that even with the fewest apps running, it still does it 4 out of 5 times.
View 6 Replies
View Related
