This sticker (the one saying "regulatory information...." in 50 languages)
would NOT come off by trying to pick at the corners. It was leaving the sticky part on.
When I pulled at the "tab" built into the sticker, I got that off but it left the whole rectangle sticky part on the laptop. In other words, the whole printed part of the sticker came off leaving all the clear sticky material on the palm rest still.
I kept picking at the corners trying to grab them but no luck.
What finally worked was sliding my fingers while pushing on the surface of the palmrest, upward, into the bottom of the sticker. In other words, press your finger on the plastic of the laptop just below the sticky stuff left behind. Keep sliding your finger while pushing on the plastic INTO the bottom line of the sticky part. It will eventually start to roll up. Do this all along the bottom edge of the sticky part and eventually you can grab the "rolled up edge" and pull at it. It should then pull off in one piece. There will be little tiny sticky marks left on the plastic but they come right up when you place the sticky rectangle piece down onto it and pull fast up.
I've had my M1530 for about 5 months and in the last few days and have had a problem with the screen.
Twice in the last 3-4 days I have come home from work to find the left hand side of the screen substantially dimme(darker.
The screen was left on regular settings, no screen saver etc. Within 5 minutes of use the left hand side of the screen had returned to normal brightness..
I have tried many settings on the computer, as well as cleaning out all my nvidia drivers and installing them back. There seems to be no solution. How do I fix this?
The McAfee expired and each time it opens a new windows I get an error message and am asked to buy again. Started to freeze the screen and I'd have to shut down the unit and start again if I had more than 3 open windows.There was a system restore logo on the left side of the screen - so I thought maybe that would work - wrong thing to do!
Now it starts, and then the windows colored balls appear and turn into the logo - then nothing but blue gray screen. Tried doing F-8 system restore to factory settings, the last option, as recommended by MicroWarehouse where machine was purchased for Army son-in-law in 2011 - would not run completely. the instruction at 0x0411c2e3 referenced memory at 0x0db81030. The memory could not be written. went back to that F8 screen automatically so I tried it again - same message ar 0x44cc2r3 and back to the screen
since it said memory, I clicked on restore memory - which may have been wrong as it said I had videos, and I did not, and it said I had pictures, which I would only have had in e-mail. but I clicked to do it. Took several hours to run. and still screen is blue/gray. Now it won't even F8. Thinking my son-in-law may have disturbed something when he re-set it for me (took all their info off prior to military deployment - and when I tried to restore that may have conflicted with what he did. (We got him btter unit, I got old one)
I have a one year old sz680 CTO with a bluetooth vaio mouse VGP-BMS33. The strange thing is that the mouse only works well when I position it to the left of the vaio.
When I have it between me and the laptop, the mouse pointer moves in shocks, and on the right it doesn't work at all. (As a test, I also tried it behind the laptop and there it also in shocks).
I have tried to move the laptop to a different location, away from external power. I have turned of wlan & wwan. I have used different batteries, both common and rechargables.
The 2 USB port on the left hand side of my HP pavilion g6 not working after i formatted my system, it does not detect any devices plugged in these two ports, the operating system before was window 7 home premium but now it having window 7 professional, what can i do?
I just bought an HP touchsmart pavilion N229tx last week and I noticed now that it started creating grinding noises every 3 seconds whenever my laptop is on and running. The noise is coming from near the vent where the air is supposed to come out.
Also when I bought the laptop and opened it the first time I keep having the fan error upon startup saying that it had found that a fan is not operational I think it is error 90B. this now happens everytime I turn on the laptop.
Yesterday while I was working on a spreadsheet, the left button of my trackpad on my Dell XPS 15z just mysteriously stopped working. I assumed that maybe my system was slowing down, as I tend to multitask and often will have a LOT going on at once. So I restarted, since it had been about a three days since my system was restarted. Anyway, it did no good. Still, the left button wasn't working.
So, I then pressed it SUPER hard and it started working. Today, I noticed that it was messing up again. However now, depressing the key good and hard doesn't seem to magically fix the situation. Moreover, it doesn't work at all now instead of intermittent workability.
There wasn't any sort of update or anything... I'm really confused. Right button has no issues, but clearly I need both. Not sure what I should do.
I have a brand new ProBook 430 G2 (SKU # G6W35EA#ABB) with Windows 8.1, fully updated. I find that every 10-15 minutes, the left button on the trackpad becomes unresponsive. The trackpad still moves the mouse pointer and the right button continues to work, but the left button does not react. This lasts for several minutes, perhaps 3-4. Then the left button resumes working as if nothing had happened. Since the button resumes working, I suspect it is more likely to be a software issue with the driver or Windows 8.1.
I have Synaptics TouchPad driver version 18.1.8.1, the current version of the driver. I have Windows 8.1 version 6.3.9600. I have Bios version HP M74 version 1.03 (07/07/2014)
I've been listening to a bunch of podcasts on my laptop lately and realized that the right hand side speaker is MUCH louder than my than the left speaker, in fact if I lower the balance on the right speaker to 0% and left to 100% it's not half as loud as the right at 100%. Is this normal? If not is there a fix for this?
Also when typing, if I press the Caps lock key too fast the cursor disappears and my typing is interrupted anyone know is up with that?
As a confirmed trackpoint user, having the mouse built into the trackpad of the T431s is causing me all sort of grief, including sore wrists - but there are two problems I can't seem to diagnose.
1) When clicking the pad for left mouse click, it often does not work until I click it a few times. I notice this more when I disable the trackpad for cursor movement (which I had to do because the cursor moves when I try to click) - but its there even when that is enabled. It comes and goes. I guess there could be some foot trapped in there, but I've only had it a week and been pretty careful. I'd rather not learn to remove the keyboard on day 6.
2) The right click gets into a condition where, when browsing,a click brings up a new tab of the link I clicked on, rather than showing me the options (open in new tab, incognito window, save link, etc). If I connect a real mouse, it is normal.
I've had my MBP for about 4 month now and have been having problems with its keyboard since I bought it. First, the "Z" key sank in (I think there was a problem with the spring). I took it to the Apple Store, and they "fixed" on the spot (it's much harder to press and only registered a key press 70% of the time). The lower right corner of the "E" has noticeably sunk in, and I need to resort to pressing the upper left corner. Also, the left side of the keyboard feels "mushy", not hugely so, but definitely noticeable after typing a few sentences. Can I request that Apple just replace the entire keyboard instead of just individual keys?
So yeah I wasn't exactly handling the thing with utmost care, was holding the open laptop one-handed by the left front corner, heard a plastic snap sound... I press down on the flat black plastic area where your left palm would rest, just above the PC card slot.. it's a bit squishy. Does it flex for yours too, am I paranoid? Its not a problem just wondering...
The MBP I bought in Aug '07 2.4 GHz model seems to be having some screen issues... in particular ... pixel issues on the far left side of my screen... I'm attaching a pdf shot of the areas in question that i took with my camera ... there are quite a few patches of pixels that are remaining a shade of white and are not responding to any colour change in desktop wallpaper/ movies/ anything...
I'm terribly dissappointed with this... i've taken pains to ensure that the MBP is always padded when i take it out (and i can count the number of times i've taken it outside home with fingers on one hand) .... so... i'm sure i haven't bumped it anywhere...
I have the apple protection plan...
any advice on what my options might be at this point? would apple look into screen replacement options? I'm in India and there aren't any official apple stores out here either:| (the closest thing out here to an apple store is a premium reseller) ... on a totally separate note .. my battery seems to be performing excruciatingly badly as well.. health is at 84% after 64 cycles ... and that's after i've done the battery calibration tests ......
I bought Sony FW490 with full hd screen (1920x1080) but after hearing so much about wonderful RGB LED display on Dell, I got one from Dell outlet and now I can compare them both side by side and send one back. To my surprise Sony's screen is a tad brighter,
white color is white and red is very accurate too, on Dell screen is dimmer (on full brightness) red is more brownish and white is yellow-greenish.
I was reading this forum for a few months and almost everybody says that RGB screen is very bright, that one can use it on half brightness, but that is not the case with my SXPS16.
I have recently bought acer aspire 6920 with vista home premium (OEM) preinstalled 64bit version. I have made recovery dvd discs from erecovery option for factory defaults.
I have two questions:
1: will Acer provide recovery discs free of cost if requested.
2: Will I be able to install vista home premium 32bit version on D drive from a retail version I have, side by side with 64bit on C drive. Shall be thankful if someone can clarify with procedure for item 2 since I am not very familiar with notebooks working.
Just noticed that my scartch and dent E6500 doesn't have a sticker. I was going to create a bootable XP disk and apparently I need that COA number to do so
Although Dell's website claims the Studio 1537 with Penryn-M 1066 MHz FSB processors are centrino 2, why didn't they include the Centrino 2 Inside sticker on the laptop? I recall that they need to be officially certified by Intel in order to get the sticker, so what is non-compliant in the studio 15 centrino 2?
Whats the best cheap/free way to remove all that glue from removing the small xp sticker? I tryed soap and water and it got most of it off, but still sticky
one sticker...ok two stickers....it becomes catch-eye attractive! three...it looks to a xmas tree! for stickers.....it is not a laptot, it is a panini album!
So, am i allowed to put off the stickers (intel, vista, nvidia,bluetooth..etc) without lose my warranty at dell?
i was getting fed up with all the naff stickers on the fw....(the intel ones and the other ones) i decided to get rid off them only to be left with sticker residue..
Yup me again, in my hunt to determine if M6400 is right for me as it costs just about as much as a used car, I want to make sure its a good investment before I buy it.
What is the main difference with the M6400 and the M6400 Covet?
I configured both with the same specs and the Covet is about $900 more in price?
I have a Sony FW and just pulled the 10 stickers placed on it and one of them left a nasty sticky residue that is accumalating dirt. Is there anyway to remove this
I've been forgetting my curiosity about this thing, but it was just now that I remembered--what does the system actually do, aside from the strategically placed rubber stoppers beneath the laptop body?
also concerning the HDD. I don't know about you guys, but I have a "warranty void if removed" sticker over one of two screw holes in the HDD compartment..will that really void the warranty if ever it got ruined? I'm in the hopes of upgrading my hard drive..
My HP DV4t hard seemed to get pretty warm under the left side, so I decided to check out the hard drive. To my surprise, the hard drive was covered by a giant black label/sticker that peeled off. Should I have left it on? I have never seen this before. The entire face of the hard drive was covered.
I bought a Z2 VAIO a while back, and curiously my Z26 didn't come with the VAIO spec sticker on the palm rest. Now, I know that you would be going 'why would you want that?'
(since I read that people usually take those off because they look horrendous), but would it indicate something iffy with my Z26? I bought this from a Sony Style store
