I have tried many settings on the computer, as well as cleaning out all my nvidia drivers and installing them back. There seems to be no solution. How do I fix this?
View 10 RepliesHP Mini 210-1000 ... Actually it's HP Mini 210-1060EV PC
From product specifications: Display: 25.6 cm (10.1") Diagonal WSVGA LED HP BrightView Infinity Widescreen Display BID (1024 x 600)
Battery has been dead a long time. My display drivers and BIOS have recently been updated from HP website. After a power failure and a restart, the display looks weird. It was shifted about an inch downwards with a black border at the top, over which the mouse will not go, and the taskbar is not visible as is off the bottom of the screen.
When I go to Screen Resolution from Windows by right clicking on desktop resolution is set as 1024x768, when I click on Advanced Settings, Monitor tab, Monitor is set as Generic Non-PnP Monitor (1024x768 60Hz). When I change to 1024x600 it looks blurry and stretched vertically, but the screen is still shifted downwards with black border on top.
When I enter Intel Graphics Settings I can do the same changes as in the Windows dialog box (640x480, 800x600,1024x600,1024x768).
In the Aspect Ratio Options when I select Fullscreen (No-Border) the Black border is fixed but the screen still appears streched vertically but the screen is cut off at the bottom with no Taskbar visible. Re-installed graphics driver as well as a few Monitor Type Drivers from windows, nothing changes. When I turn the notebook on, the HP Quickweb screen also appears as a 1024x600 stretched vertically with no black border at top but going off the display at the bottom.
It appears that Windows and Hp Quickweb see the display as 1024x768 60Hz after the power failure. Before that, I had installed some Windows Updates but nothing related to Display drivers. I only had a System Restore point from earlier that day (very low free hard drive space?) but that didnt do anything.
Guessing it's a registry/driver problem since no pixels are bad and the black border on top is fixed in Aspect Ratio Options when I select Fullscreen (No-Border).
I just bought an HP touchsmart pavilion N229tx last week and I noticed now that it started creating grinding noises every 3 seconds whenever my laptop is on and running. The noise is coming from near the vent where the air is supposed to come out.
Also when I bought the laptop and opened it the first time I keep having the fan error upon startup saying that it had found that a fan is not operational I think it is error 90B. this now happens everytime I turn on the laptop.
The left side usb port appears to have fallen into the laptop case. It is rattling around, visible and does not appear to be connected to anything.
View 1 Replies View RelatedThis sticker (the one saying "regulatory information...." in 50 languages)
would NOT come off by trying to pick at the corners. It was leaving the sticky part on.
When I pulled at the "tab" built into the sticker, I got that off but it left the whole rectangle sticky part on the laptop. In other words, the whole printed part of the sticker came off leaving all the clear sticky material on the palm rest still.
I kept picking at the corners trying to grab them but no luck.
What finally worked was sliding my fingers while pushing on the surface of the palmrest, upward, into the bottom of the sticker. In other words, press your finger on the plastic of the laptop just below the sticky stuff left behind. Keep sliding your finger while pushing on the plastic INTO the bottom line of the sticky part. It will eventually start to roll up. Do this all along the bottom edge of the sticky part and eventually you can grab the "rolled up edge" and pull at it. It should then pull off in one piece. There will be little tiny sticky marks left on the plastic but they come right up when you place the sticky rectangle piece down onto it and pull fast up.
I've had my M1530 for about 5 months and in the last few days and have had a problem with the screen.
Twice in the last 3-4 days I have come home from work to find the left hand side of the screen substantially dimme(darker.
The screen was left on regular settings, no screen saver etc. Within 5 minutes of use the left hand side of the screen had returned to normal brightness..
I purchased a Y580 a while back, and I am not getting black bars on the monitor (shown below). At first it seemed to be there randomly. But now it is on constantly. Opening or closing the screen at different angles does not change it. If I connect an external monitor, it has no issues. I can also see the black bar when windows is booting up as well. And it shows when I am in BIOS.
View 4 Replies View RelatedI am extremely disappointed these days bcoz of the way things are turning out for my HP 530 Laptop. And all these issues are happening merely bcoz of the fraud people in Mumbai, India whom I had given my laptop to for either LCD Screen replacement or By paying the money and changing the LCD screen. The computer market of Mumbai is highly equipped with people of dishonesty and fraud minded attitude and even if one pays money to them, they are still bound to cheat you! All are simply crooks and keep thinking of ways to cheat innocent and genuine people like me. The entire computer market in Mumbai city are filled with Frauds...thereby not leaving back a single person or an organization to trust on.
DFDSFDSFDS
My Laptop's Issue...
This morning, when I turned ON my laptop, I see the entire display of my Laptop being shifted from Right to Left by 10% thereby leaving black area at the right hand corner.
Last week, when I turned on my laptop for about few mins, the screen was perfect positioned fine. However, due to the internal fan not rotating, I had to shut down my laptop with 5-7 mins. I had also Disassembled and Reassembled the entire laptop 2 weeks back to check the Fan area if theres any dust and blew Vacuum Blower to remove any dust in the Fan area if any. Also, I could see the Fans connector being properly connected to Motherboard. After Re-assembling everything, I turned on my Laptop and I could still see the Display being positioned perfectly fine! But, the Fan still wasnt rotating.
Also, when I hooked up an external monitor to my Laptop VGA connection, the display positions perfectly fine on an external monitor! But still, the display remains shifted to Right on the LCD screen of my HP 530 Laptop. This I believe is a physical shift taken place as at BIOS mode also, the Display is shown shifted to right.
The McAfee expired and each time it opens a new windows I get an error message and am asked to buy again. Started to freeze the screen and I'd have to shut down the unit and start again if I had more than 3 open windows.There was a system restore logo on the left side of the screen - so I thought maybe that would work - wrong thing to do!
Now it starts, and then the windows colored balls appear and turn into the logo - then nothing but blue gray screen. Tried doing F-8 system restore to factory settings, the last option, as recommended by MicroWarehouse where machine was purchased for Army son-in-law in 2011 - would not run completely. the instruction at 0x0411c2e3 referenced memory at 0x0db81030. The memory could not be written. went back to that F8 screen automatically so I tried it again - same message ar 0x44cc2r3 and back to the screen
since it said memory, I clicked on restore memory - which may have been wrong as it said I had videos, and I did not, and it said I had pictures, which I would only have had in e-mail. but I clicked to do it. Took several hours to run. and still screen is blue/gray. Now it won't even F8. Thinking my son-in-law may have disturbed something when he re-set it for me (took all their info off prior to military deployment - and when I tried to restore that may have conflicted with what he did. (We got him btter unit, I got old one)
I have a one year old sz680 CTO with a bluetooth vaio mouse VGP-BMS33. The strange thing is that the mouse only works well when I position it to the left of the vaio.
When I have it between me and the laptop, the mouse pointer moves in shocks, and on the right it doesn't work at all. (As a test, I also tried it behind the laptop and there it also in shocks).
I have tried to move the laptop to a different location, away from external power. I have turned of wlan & wwan. I have used different batteries, both common and rechargables.
The 2 USB port on the left hand side of my HP pavilion g6 not working after i formatted my system, it does not detect any devices plugged in these two ports, the operating system before was window 7 home premium but now it having window 7 professional, what can i do?
View 4 Replies View RelatedEnjoying my new Acer E1 laptop. I installed Linux Mint and got rid of windows 8.1. Everything has been working/running great... except there is a black border about a 1/2 inch wide running all the way around the screen. I've tried without success to get rid of it and can't remember if it was the same when it was running windows. When I google image search that model of Acer, every pic I see shows the screen image go right to the plastic edge with no black border bars. Iff the Acer E1-510P-4814 is suppose to have a 1/2 inch black bar around the edges of the screen?
View 3 Replies View RelatedI've got a X230 with an IPS screen since 1,5 years, and I currently have some issues with it.
Sometimes, the bottom left of the screen blink and black bars appears, along with some square brightness shapes.
I'm pretty bad to description, so here an album of the problem : [URL] ..... (it's more clear if you zoom).
Link to picture
This is a detail of the bottom left :
Link to picture
Again, this appear sometimes only, and a knock in the screen resolve the problem, but it's worrying.
I've been listening to a bunch of podcasts on my laptop lately and realized that the right hand side speaker is MUCH louder than my than the left speaker, in fact if I lower the balance on the right speaker to 0% and left to 100% it's not half as loud as the right at 100%. Is this normal? If not is there a fix for this?
Also when typing, if I press the Caps lock key too fast the cursor disappears and my typing is interrupted anyone know is up with that?
I seem to have a problem as soon as i unplug my charging laptop. It seems to freeze and screen goes into a frenzy of lines and running bars. I have a dell 1545 and its vital .....
View 5 Replies View RelatedI've had my MBP for about 4 month now and have been having problems with its keyboard since I bought it. First, the "Z" key sank in (I think there was a problem with the spring). I took it to the Apple Store, and they "fixed" on the spot (it's much harder to press and only registered a key press 70% of the time). The lower right corner of the "E" has noticeably sunk in, and I need to resort to pressing the upper left corner. Also, the left side of the keyboard feels "mushy", not hugely so, but definitely noticeable after typing a few sentences. Can I request that Apple just replace the entire keyboard instead of just individual keys?
View 6 Replies View RelatedI’ve got a Del Studio 1753 laptop and I use it with a separate LG flatron w2486L screen. The cable recently came out of the VGA port and when I plugged it back in there is now a black strip at each side of the screen and the image doesn’t go across the full width any more. In display settings I’ve got the monitor set at the highest resolution possible, 1440x900, but this makes no difference (I’m on Windows 7).
View 7 Replies View RelatedThe MBP I bought in Aug '07 2.4 GHz model seems to be having some screen issues... in particular ... pixel issues on the far left side of my screen... I'm attaching a pdf shot of the areas in question that i took with my camera ... there are quite a few patches of pixels that are remaining a shade of white and are not responding to any colour change in desktop wallpaper/ movies/ anything...
I'm terribly dissappointed with this... i've taken pains to ensure that the MBP is always padded when i take it out (and i can count the number of times i've taken it outside home with fingers on one hand) .... so... i'm sure i haven't bumped it anywhere...
I have the apple protection plan...
any advice on what my options might be at this point? would apple look into screen replacement options? I'm in India and there aren't any official apple stores out here either:| (the closest thing out here to an apple store is a premium reseller) ...
on a totally separate note .. my battery seems to be performing excruciatingly badly as well.. health is at 84% after 64 cycles ... and that's after i've done the battery calibration tests ......
After i uninstalled Android Studio last night, I was prompted to restart my laptop to apply changes. I clicked yes, after the reboot however I no longer had my full screen display(1280x800) and there is a black bar to the right side of the screen.
I have tried updating/uninstall/reinstalling my graphics driver(Intel Hd Graphics 3000) and the bar is still there. No option to scaling,(set at Maintain Display Scaling)
I tried taking a picture to display the black bar on m monitor using print screen but the black bar does not show when I paste into paint.
OS: Windows 8.1 64 bit
Laptop: HP Pavillion g6 2230us
First of all my laptop is : HP Pavilion dv6-6160se Entertainment Notebook
To the problem now : A few days ago my laptops screen started out of a sudden shutting down/turning black( no lights at all ). This was happening while using the laptop at random. The screen had no lights, and if i use a flashlight on it there is nothing. like its turned off completely.
Before this happens. This behavior varies. Sometimes it flickers from my desktop to a black screen then back on and some times not. Most of the times screen changed to a random color (green mostly) then becomes black/shuts down.
NOTE: The laptop keeps running, i can hear the videos playing so it probably isn't a gpu chip or gpu issue , music and games.
Here are everything i tried and all or the details i could accumulate in past couple of days:
1. If the screen flickers , blacks out and then turns back on i get a message that gpu drivers have stopped working and recovered ( on both amd and intel ).
2. If the screen blacks out, on rare ocasions if you close the laptop lid and let the laptop go to sleep , when waking up screen works again ( noticable due to screen moving)
3. I tried installing 4 different drivers all with clear install. ( didn't work)
4. I tried to to recover system with restore point. ( didn't work)
5. I tried to lower the screen brightness. ( didn't work)
6. tried this trick: Turn off laptop.. Remove battery.. Hold the power button for 30-45 seconds.. Plug-in the charger ( don't put the battery in )Turn on laptop and see if it works.
Very Noticable details:
7. Since on of the rare fixes requires to move the lid i tried shaking the screen a bit or pushing it slightly to different directions. This actually does the trick and turns the screen back on ( i am right now typing this after using this "trick"
So, with this one as a hint there are a couple of stuff i have in mind but i am not sure ...
a) There is a loose LCD cable and when i type a little vibration moves it and ends up in a black screen.
b) I read that if you use a flashlight and you cant see your desktop it means its a bad inverter.
c) Can the inverter have a lose cabe instead of the lcd ?
Currently the screen looks ok ( maybe its the certain angle it has after i moved it. Tried to play a game for a few mins and i got the black screen again. Closed the lid so the laptop goes in sleep mode then opened it and it worked. Just for the records.
Just tried to play a game again. got the blackscreen, shaked the screen a bit and it worked but for the 1st time i get the message " Application has been blocked from accessing graphics hardware" , Can it be that its the GPU after all or maybe drivers?
Tried to play a game again and it seem to trigger the issue . ( i am currently running the laptop with only the intel drivers installed) ...
I have a Compaq Presario CQ60. The Display does not appear to be working. When I turn on the laptop the display remains black. No boot up screen, nothing. I can't go into the bios because I have no screen. The screen remains black. The harddrive appears to be working and all other functions appear to be working but I am not sure because I have no screen.
Is this a known issue with the Compaq Presario CQ60?
I have laptop listed above. For the past 3 days I hasn't not been able to get it in. it sounds like its starting but the screen stays black. Recently installed antivirus on 01/01/2012 because I had some kind of worm/malware. Windows 7 is the OS. Cap lock light is on and "hp combo assistant" light is on constant no blinking. Don't know what to do.
View 9 Replies View RelatedI recently got an acer aspire e15 for xmas and I've started to have problems with it like when i turn it on and adjust the screen or simply pick it up to move it the screen will turn off like a standby but take ages coming back on and sometimes it will just simple restart the laptop....
View 1 Replies View RelatedI bought Sony FW490 with full hd screen (1920x1080) but after hearing so much about wonderful RGB LED display on Dell, I got one from Dell outlet and now I can compare them both side by side and send one back. To my surprise Sony's screen is a tad brighter,
white color is white and red is very accurate too, on Dell screen is dimmer (on full brightness) red is more brownish and white is yellow-greenish.
I was reading this forum for a few months and almost everybody says that RGB screen is very bright, that one can use it on half brightness, but that is not the case with my SXPS16.
I have recently bought acer aspire 6920 with vista home premium (OEM) preinstalled 64bit version. I have made recovery dvd discs from erecovery option for factory defaults.
I have two questions:
1: will Acer provide recovery discs free of cost if requested.
2: Will I be able to install vista home premium 32bit version on D drive from a retail version I have, side by side with 64bit on C drive. Shall be thankful if someone can clarify with procedure for item 2 since I am not very familiar with notebooks working.
My Acer Aspire One 10.1 notebook wont boot. All I get is a black screen with microsoft corporation written under neith a rectangle, where a green bar sliding from left to right should appear, but doesn't. What do I need to do?
I have reinstalled win7 on my c drive using another computer. The hard drive booted on that computer. Which leads me to believe some thing is missing.
I've dell Inspiron N5110 and I'm using it since past 3 and half years. In 2013, base of the laptop was broken and I had to replace it with a new one though there was no problem in hardware at all. Soon after the dell representative installed the new base and left my house I was facing a weird problem. When I power on the laptop, my screen gives a mild flash but does not start (6 out of 10 times, not always), but I can hear windows start up sound in the back ground. I use to press power button again to lock or stand by the laptop and then move my mouse. After performing this I can see the screen glows and log on screen shows up.
I was using my laptop like this for past 1.5 years as pressing a power button was no big deal. Today on the eve of new year, I saw my trick does not work any more. I was not able to start my screen even after repetitive attempts. But I remember I used it last night, display was really fine.
My 1530 has recently been overheating when left idle for a while(30 min or so). When I come back I find that the fans stop working, the system overheats and the laptop restarts with blazing temperatures.
In order to turn the fans back on, I have to shutdown the laptop and then switch it back on
Currently whenever I startup my laptop the display flickers. If windows fully boots or I try to enter one of the startup menus the will flash briefly on the screen and then the display will return to and remain black.
I am able to run an HDMI cable to my TV and it seems to be running fine other than going black with the occasional distorted picture of windows booting.
I updated the bios which fixed other issues. I updated the drivers and did all the win7 updates to rule any of that out. When teh laptop gets down to 18% it just powers off instantly. It does not go through a normal shutdown process or hibernate. I can power it back on and it shows 18% battery left. Is the battery going bad? I dont think this machine is barely a year old yet. I have no problems on wall power. Could it be a Win7 power setting? Just surprised win7 would slam the power off like that.
View 8 Replies View Related