So dell replaced my m1330 with a SXPS 1340, but they did not have any LED ones available, so they sent a CCFL.
They agreed to swap it with the WLED screen. My question is, is the casing different for the CCFL and WLED like it is on the m1330? I know the LED casing is thinner on the m1330.
So dell didn't upgrade my screen when they replaced my lid today and still interested in buy a LED WXGA for my lappy
So I found a couple screens for the 1340 on Ebay but ... not sure on a couple of things:
I have a Arctic White Lid with a 2MP webcam and ccfl screen, is the current led screen or the one in the m1330 is compatible with my lid ?
I'm looking to buy a M1530 LED WXGA+ screen (1440x900). I currently have the stock 1280x800 CCFL. I have some question that I'm hoping some of you would be able to answer:
Will the LED screen fit normally within the stock CCFL backing/bezel?
I'm looking at screen descriptions, for the LED's I don't see "inverters" listed as included but in some, though not all CCFL have it mentioned in the description, is this something that's no longer required? or is it built into the panel?
What is a good price for these panels? The panel I'm looking at is a Glossy 1440x900 LED screen for $205CAD with shipping and taxes included. Good price? bad? Is it possible to get it cheaper?
Concerning batterylife, I have a 9cell and am averaging of 3.5-4hrs of usage with wifi on and screen in one level just before full brightness on Power save mode. Will I see a very noticable increase in battery life? I keep hearing people spout "30%" are there any actual tests?
I like repairing laptops as a hobby. I recently bought a M1330 laptop without a screen and with a small video card problem. The laptop still worked on external screen, but showed some lines.
This was due to the NVidia gpu problem. I managed to fix it by using a hot air soldering station(Youtube video). To decrease the chance that it arrises again, I also did the copper mod(description). This meant that I could finally use the laptop for my work if I could just install a LCD screen.
Since I have spend quite some time on repairing the laptop already, I decided to invest some additional money to upgrade from a CCFL to a LED backlit LCD. I ordered a new cover, screen and LED LCD cable.
When I assembled all the parts, everything fits perfectly .....
My nearly *finalized order* for my SXPS 1340
What do you think?XPS 1340, Intel Core 2 Duo P8700 (2.53GHz/1066Mhz FSB/3M L2 Cache)Microsoft Windows Vista with SP1 Home Premium Edition 64-bit Edition EnglishMerlot
Red High Gloss Finish with Leather XPS 13404GB, DDR3, 1067 MHz 2 Dimm13.3 Inch Wide Screen WXGA WLED Backlit LCD with 1.3 MP CameraNVIDIA® GeForce® 9500M500GB 7200RPM
Free Fall SensorSeagate Hard Drive2 Year CompleteCare Accidental DamageProtection2 Year On-Site Warranty..6 Cell Batt/Adapter5GB DATASAFE ONLINE 1.1 FOR
SDO/DIMIntegrated High Definition Audio 2.2Cyberlink PowerDVD DX 8.2 for DVD8X DVD+/-RW Slot Load Drive$100 Dell Promo Gift Card w/ DPA - Arrives in 6-8Total: $1,282.16
Here is a link to flickr stream of Upgrade, [url] I made a video of it and once thru editing will post it...One thing in the photo stream you must undo all screws on the back, also on the top there are three hidden screws under the middle of the monitor covered with black stickers, just pierce with cross head...Also you need to run a rather large screwdriver down the right side of the body and bottom each side of the pad to release the plastic snaps ps familiarize yourself with ribbon fastener technology the tan fitting moves back then the ribbon comes out vice versa Please post success with Processor types!
View 10 Replies View RelatedHas anyone got a shipping confirmation or tracking number from Arvato for their Windows 7 upgrade? I've received nothing yet and my order status on the Arvato page is "ACCEPTED", but there is no shipment confirmation or tracking number.
View 10 Replies View RelatedI was very excited to order a dell vostro 1520 online, and i got a great deal on it. i ordered the laptop on the 14th of this month, and according to the email they sent me, it was supposed to be delivered by the 30th... which is pretty late but since i was getting a pretty good deal IMO, i thought "whatever, as long as its here before may 4th".
however, earlier today i got a call from dell telling me that they wont be able to build the laptop since they dont make them anymore.... ??? couldnt they have told me this EARLIER like say, LAST WEEK?
the dell vostro 1520 is STILL listed on their website (dell.com and click on small business) along with many other laptops. i dont know what to do at this point. obviously i will have to order another laptop, and it will come VERY late according to my schedules and time constraints... but which dell laptop can i order and which shouldnt i even bother with since they dont build it anymore and apparently are too lazy to update the website?
Since newer versions of this laptop will receive the new 4670 card, is it possible/stable to upgrade current SXPS 16s running the 3670 to the 4670?
Also, I Googled up the specs of both cards, it seems that the 3670 is clocked equally/higher than the 4670 and all other specs are the same.
I'm considering upgrading my bios to A07 (latest?). Any reason NOT to do it? Has anyone found any issue with this latest BIOS?
View 10 Replies View RelatedIf the information below is true, then why does Dell offer 6&8 G memory upgrades in the configurations? (Main points highlighted in color)
Memory
Connectors two internallyaccessible
SO-DIMM
sockets
Capacities 512 MB, 1 GB, and
2 GB
Memory type 1066 MHz DDR3
SO-DIMM
Memory
configuration
possible
1 GB, 1.5 GB, 2 GB,
3 GB, and 4 GB
Just wondering, as I have been "window shopping" today. So far, it looks like Dell's upgrades are actually cheaper than DIY kits. I guess you could subtract whatever you could sell your stock memory for.
To anyone who has actually opened theirs: Does it really only have two slots? 3x2 Gb kits are around 100-150 USD, depending on where you look. Would be too convenient to have empty slots to stick extra 2 G modules into...
I am receiving a replacement laptop soon. I have not received it, but I have a couple of questions. It has the 1 gb ATI gfx card.. 4670 i think?? Now from what I understand, this is relatively new. On dell's website it says any laptops ordered between june 26th and december 31st qualify.
View 10 Replies View RelatedI was perusing my Dell.com account for my laptop and looking at the build specs (Studio 1537), and noticed something that confused me a bit:
1J656HLiquid Crystal Display 15.4WXGA, Light Emitting Diode True Life, 0-2BD, Lg Philips Lcd
and
1M135CBezel, Cold Cathode FluorescentLamp, Camera, HEPURN .....
I have been pondering whether my Studio 1537 came with a LED backlit screen since Dell didn't include a Centrino 2 sticker although all of my laptop hardware meets the req. for Centrino 2. Who knew what else Dell could pull?
I decided to fire up my Studio 1537, Inspiron E1505, and Mini 9 to do a comparison with the LCD backlight on full power with Notepad maximized (lots of white).
The E1505's LCD was about a year old and is CCFL. The Mini 9 and Studio 15 are brand new and both were advertised to have LED backlighting.
The E1505 looked dim and yellow compared to the Studio 15's CRISP white color, while the Mini 9 had an almost purple tint to the white screen. I work with white light a lot and can say the E1505's LG CCFL was around 4000-4300K for color temperature while the Studio 15 was more around 5800K and the Mini 9 at 6200K or slightly higher.
The problem with white LED's is that they have a shorter lifespan (~20,000 hours) compared to red, blue, and green (usually 100,000 hours). This translates to noticeable decrease in white light output after 2.3 years of non-stop 24/7 usage.
Another major difference I observed is that the CCFL at max brightness is equivalent to the LEDs at about 40-50% brightness!
dell is sending me the led instead of the ccfl i have now so i want to know the differences....
View 7 Replies View RelatedI currently have an Inspiron 1720 with WUXGA (1920x1200) display. I'm looking at the Studio 17, which comes with either WXGA+ (1440x900) CCFL or WLED, or WUXGA+ (1920x1200) CCFL
View 7 Replies View RelatedI recently had my screen replaced by dell dispatch for my studio XPS 1340. My hinges were loose, instead of replacing just the hinges dell dispatch had replaced the whole screen. My question is can you tell a difference between CCFL and LED. My specs is LED I just want to make sure the technician, replace with the right screen. Is LED thinner than CCFL if so what is the technical spec of thickness between the two. Is there a way to check if you have a 1.3 or 2.0 webcam.
View 10 Replies View RelatedThere was a discussion on this subject before but I can't find it. Currently I own XPS 1330 with nVidia GPU and LED screen. My GPU died a while ago, was replaced.
After that I applied copper mod. But it will die some time in future again. So I'm thinking to replace my mobo with one that has integrated GPU.
A month ago I received my new laptop from Dell. After a short inspection I discovered that instead of 2 HDDs only one was appearing in device manager.
After a bios check that confirmed that only one HDD was installed I called Dell Support. The person allowed me to open the laptop and to my surprise there were 2 HDDs but one of them was not fixed with screws and it was able to move freely inside.
Those from Dell decided to replace my laptop and one week later I received a new one .....
This is interesting... a friend of mine just tried to order the SXPS with the i7-820 processor and got denied by Dell. Apparently, the 1645 has been fully discontinued, and Dell will no longer be placing the i7-820 processor in any SXPS form factor. They quoted that due to hardware and power issues as the reason behind discontinuing the 1645 (and replacing it with the 1647) and killing i7-820 support. The sales rep said the only offering will be the Studio series for the i7-820.
As a 1645 owner with the i7-820, this is kinda scary that this laptop has been discontinued this quickly as well as the offering of the 820 series chip. We ended up calling a second time, and another sales rep confirmed the same story.
Anyone get similar information from Dell on this? I'm also wondering if this is a "Dell Canada" thing...
I have an M1330 with LED and love the display. I came across such a good deal for a refurb Studio XPS 13 that i could not pass it up - (P8800, 4GB, 500GB 7200rpm, 512MB N10M-GS,
Wireless 1510, Bluetooth 370 for $875 shipped). Only problem is that it has a CCFL screen instead of LED.
Will the difference be really noticeable? Am i going to regret it?
I have an XPS M1330 purchased about 2 years ago.
The screen went extremely dim permanently one day when the battery reached its near absolute low. For some reason the screen came back to a brightly lit life after a system restore. The same problem occurred again and sadly after sitting on it a few weeks I did not have a restore point old enough to troubleshoot with the same solution.
Now I'm not sure if system restore really had anything to do with the monitor crapping out because I've never heard of such a scenario, but I'm just going to throw it out there on the off chance that it does .....
The CCFL WUXGA screen belongs to a precision M90 and is almost 3 years old. Keep that in mind for this review.
The RGBLED is way brighter than the CCFL; at nightime, I would only use the minimum brightness setting.........................
I got my XPS 16 a few days ago (was going to hold out for a possible GPU update, but found a great deal at the outlet with the rgb-led, and couldn't wait any longer , and I'm going to be traveling a lot with it, so I'd prefer the 6-cell with it's lower profile. Does anyone have a new 6-cell that they want to trade for a brand new 9-cell?
View 9 Replies View RelatedI have a XPS 1530 with the 128mb 8400gs GPU.
I've come across a MB with the 256mb 8600gt and would like to swap them out.
Does anyone know where I can find instructions on how to take apart my laptop?
So Dell has ordered me my replacement Studio 1555 for my current Dell 1535 as it has given me so many problems and still is, as I have explained in previous posts.
I am receiving it on the 14th of August and a courier is coming to take the old one away on the 17th.. I have those days to transfer all my data over, but I have a dilemma.
I recently had the Nvidia GPU failure on my XPS 1330 that a lot of people seem to get after 1.5 years of owning the laptop. Dell came out the next day and swapped the motherboard for a different one.
The only thing is, the motherboard they put in is a Rev:A00 which I assume is the very first revision? Not sure what I had in before but I'm noticing that the laptop is running very hot when just idling.
My CPU in an Intel T7500.
I am running Speedfan and even though CPU is very low, Temp1 is reporting 72C. Is this normal or is the laptop running hotter than it should? .....
i have a xps m1730 with a t7500 specs in the sig after buying a few pu hungry games i realized that something had to be done so can i replace an x9000 to replace my t7500?
View 9 Replies View RelatedI had a major car accident and my m6300 is partialy destroyed.
I already called Dell and i have the Accidental Cover.
What do you guys think i will get to replace the m6300?
IT had 4gb ddr2, FX1600 Quadro, T7500 etc.
I recently received my Dell Studio 1535 after my motherboard on my inspiron 9100 fried. The lcd screen on the 9100 is much better (1680x1050) than the 1535 (1280x800), also i hate glossy screens. After reading this thread
[apparently i cannot post links yet, just search "LCD Swap m1530" in this site and you'll get it right away.]
I was hopeful that i would be able to swap out the 1535 screen and put in the screen from the 9100. I got both successfully removed, but kinda got stuck with the inverters and all that stuff, and got scared because i don't want to break anything. The thing that confused me the most was that the 1535 lcd plugged TWO things (power i think?) directly into the inverter, whereas the 9100 has only 1 thing that plugs directly into its inverter. It seems pretty clear that the original inverter has to be the one the computer uses based on all my googling of this subject, but how can i do that if it doesn't plug into the inverter the same way? can someone please offer me some help in this? i would have like to have contacted the original poster of the thread i linked, but of course, no contact information was available in his profile I may post pictures if i decide to take it all apart again. At the very least, can someone confirm or deny that it would be possible to make this swap? i will be very disappointed if i'm stuck with this low res screen forever...