Dell :: Web Camera Not Found (XPS M1330) Probably Cable Disconnected
Nov 8, 2008
Last summer dell replaced my motherboard and since then, my webcamera stopped working. It cannot be found on device manager and the blue light next to it stopped blinking when my system is booting.
Thus, I guess that the technicial forgot to connect the camera cable on my mtherboard. Does anybody know how I can connect it? Owner's manual doesn't mention anything about the camera...
I have tried to install the drivers and the support software but then when I run Dell Webcam Center I get the message "No supported webcamera detected. Please plug in to continue..."
View 10 Replies
ADVERTISEMENT
Oct 21, 2014
After replacing the fan, I have a power up issue with the laptop. Basically, the laptop will only power on with the power cable disconnected at the motherboard. It was by mistake that after the fan was replaced and everything was put back together, that I noticed that the battery was not charging.
I then reopened the machine and reconnected the power cable to the motherboard and nothing - no power.
When plugging in the power source with the battery in place, the LED adjacent to the power socket lights up WHITE then stays ORANGE and will not power up. No other lights, no fan noise, nothing.
If I remove the battery, the LED adjacent to the power socket lights up WHITE and stays white however will not power up either. Same agin, no other LEDs, not fan noise, nothing.
I have now opened the machine back up and disconnected the power from the motherboard. Put it all back together and the laptop powers up as normal with the battery and it works fine. (Well until the battery runs out anyway).
View 3 Replies
View Related
Jul 3, 2009
i am having problem on my camera..though i installed the driver of it but when i launch the acer eye camera it says "camera not found"..i tried to re-install it but same thing happens..i also reformatted it...
View 7 Replies
View Related
May 18, 2013
I can't found my camera device in device manager and there is no imaging devices in device manager. There is no camera tab in Communication Settings (Fn+F5)...
I tried to install
"Integrated Camera Driver (1.0M) for Windows 7 (32-bit, 64-bit), XP - Notebooks"
"Integrated Camera Driver (0.3M) for Windows 7 (32-bit, 64-bit), XP - Notebooks"
but nothing happened ..
In the first time when I installed the windows the camera was working but now it's not !!
My Laptop is : ThinkPad Edge E530
My OS is : Windows 7 32-bot
View 4 Replies
View Related
Oct 17, 2008
I placed an order last night for a refurb m1330. The spec for the system says that it is the LED screen and has a 2.0mp camera. I thought this config didn't exist -
View 10 Replies
View Related
Sep 18, 2009
I have an XPS M1330 purchased about 2 years ago.
The screen went extremely dim permanently one day when the battery reached its near absolute low. For some reason the screen came back to a brightly lit life after a system restore. The same problem occurred again and sadly after sitting on it a few weeks I did not have a restore point old enough to troubleshoot with the same solution.
Now I'm not sure if system restore really had anything to do with the monitor crapping out because I've never heard of such a scenario, but I'm just going to throw it out there on the off chance that it does .....
View 4 Replies
View Related
Mar 26, 2009
i found that whenever i move the LID to close it, open it or just move it for no reason the LED will blink.
Already had screen replaced, keyboard and etc.
View 10 Replies
View Related
Oct 15, 2008
I was doing some work on my Windows Vista Ultimate 64 bit on the XPS m1330 laptop and when i decided to restart, i got the no bootable device found message.
I ran diagnostics, no errors found.
When i put in the vista ultimate disc and NOT press anything. It will boot into windows.
When I do not have it in. It will tell me no bootable device found.
The hard drive does show in device info in bios.
Im running the chkdsk c: /f /r from command prompt in vista repair thing.
I wonder what message i will get after i complete the chkdsk.
Would reinstalling windows as a whole fix this problem?
View 10 Replies
View Related
Dec 16, 2014
I got XPS 15 (9530, Late 2013) couple of days ago with widnows 8.1 installed on it and since the day 1 I am running into a weird problem. All of my USB devices keeps disconnecting. Whether its my phone (HTC One M8) or my portable harddisks. I have tried multiple cables and the result is the same.
I tried connecting all of those devices on different laptops and they work fine except for my laptop. One more thing is that if I have my phone connected with the laptop, it charges fine however, I am unable to browse any file on my phone because it keeps disconnecting.
View 1 Replies
View Related
Sep 15, 2014
I have a new hp 15 r007tx laptop with windows 8.1 pro x64. Now I am facing a problem related to wifi. I've installed the required drivers but it keeps disconneting frequently. (sometimes its working just fine).
View 2 Replies
View Related
Sep 3, 2014
Product name: HP Pavilion g6
Product number: A3A09EA#ABU
My problem goes as following:One day I realised I cannot use my built in camera anymore. Tried reinstalling original preinstalled Cyberlink Youcam software, but as you can assume if that worked - I wouldn't be here. Then I tried troubleshooting according to HP guide. The problem is there is no category called "Imaging devices" at all.
I can place two bets on what could actually happen:
a) somehow I managed to delete basic HP webcam 101 driver.
The exact name of the device is: USBVID_05C8&PID_021E&MI_00
b) internal camera itself broke down (it's not unplugged cord issue - made sure myself)
I believe I could try installing basic separate driver for the camera, the problem is I cannot find one/cannot find reliable source. Could you send me/upload it for me?
View 2 Replies
View Related
Dec 20, 2010
For the last two days or so, my Lenovo G560 laptop (running Windows 7, 64-bit, BIOS 2.10) has had problems with its (wired) network adapter after waking up from hibernation. It is shown as disconnected (same as if the cable was physically detached). The only major change I performed in the last few days was installing Service Pack 1. However, the problem only appeared about two days afterwards, so I'm not sure if this is related at all.
In such cases, IPCONFIG reports the following for the NIC:
Ethernet adapter Local Area Connection:
Media State . . . . . . . . . . . : Media disconnected
If I try IPCONFIG /RENEW, I get
Windows IP Configuration No operation can be performed on Local Area Connection while it has its media disconnected.
Hovering over the tray icon says "Not connected". Troubleshooting of course doesn't find anything. Also, there are no weird entries in Event Viewer (unless they're hidden somewhere in other views). Basically the behavior is identical to when the network cable is physically disconnected (unplugged).
Also, unplugging the network cable, waiting a few minutes, and plugging it back again doesn't do anything.
For now I have two workarounds:
-rebooting the system
-right-clicking Local Area Connection (under Network Connections), selecting DISABLE from the menu, waiting for a few moments, and then choosing the ENABLE from the context menu.
View 9 Replies
View Related
Feb 19, 2010
I have recently bought a T400. At the moment, it is running on Windows XP, Service Pack 3.
After installation of Windows XP, I have installed all the relevant drivers and no yellow question marks appear in the Device Manager panel. However, during the process of installing these drivers, now whenever I plug in our take out the AC Power Plug, the screen goes blank for about a second and then comes back.
This problem was NOT there immediately after installing Windows XP and Service Pack 3, i.e. before installing the drivers. I think that it is one particular driver which may have caused this.
I have already tried re-installing the Graphic Driver.
View 9 Replies
View Related
Sep 3, 2012
Basically, i recently purchased a Lenovo Ideapad U410 blue from Canada Computer & Electronic. Everything was good until recently, I am having trouble connect to my home network!! It was fine, but two days ago, it just frequently drop out from my home wifi( keep saying limited access, no internet connection, then identifying.....no network access)
The problem is, all other devices i got are fine! My other laptop, my phone, and my ipad are all good to connect to my home wifi!!! And what's more confusing is that, my U410 is OK to connect to other network like the hotspot I set up from my iphone(just trying), my frds' wifi......And what's even more bothering, is that it happened two days ago, and yesterday the problem just magically disappeared!! I used it surfing internet for the whole last night with my home wifi and no problem with it.
However, i woke up this morning, problem popped up again,, can't connect to internet! I mean, the signal is super good!!!! no problem with detecting network, even connecting, it just wont identify or whatever. Drivers all up to date! I mean is a brand new computer....
SO is it my laptop's problem, or my network adapter's problem , or is it my router's problem!!!
View 9 Replies
View Related
Oct 29, 2009
I'm upgrading my Toshiba MK3008GAL hdd to a MK8025GAL. The Toshiba HJ178 Flex Cable will not clamp tight in the new drive and now won't clamp tight back in the old drive either. The laptop does not see the new drive OR the old drive if I put it back in.
The ZIF connectors seem to work in that they flip up (open) and down (closed) as they're supposed to. In the old drive the cable was tight when I first removed it.
I've tried taping the cables down in both drives, and inserting paper in with the top of the cable to make a snug fit. Still neither drive is recognized.
I've ordered a replacement cable (used) in case I've mangled the old one, but still the old one should fit tight.
View 9 Replies
View Related
Sep 18, 2009
Ive got an E6400, great machine.
im trying to hook up my LCD (LG 720P) with DP to HDMI cable
the video is great but there is no audio, ive tried with my friends tv (sony 1080P), audio goes great, im on win7 and th graphics chip is intels GMA
windows recognizes my tv but there is no audio
View 10 Replies
View Related
Apr 9, 2009
Yeah so my brand new E4200. Went to install Ubuntu on it. Voila the Esata cable connecting to the external drive refuses to come out of the notebook.
Please tell me there is a magic button that I have to pus
View 6 Replies
View Related
Jun 11, 2009
I own a Studio 1555 and i am having this peculiar problem with my onboard LAN connection. The LAN cable is connected to the NIC, yet it is displaying cable not connected. I need to reconnect the cable (remove it from the NIC and reconnect it) and it displays cable is connected and the connection ensues. Once i restart the machine, the same is displayed and i will have to reconnect the cable once again in order to get connected.
I do not want to reconnect the cable every now and then, when i reboot the laptop..
View 10 Replies
View Related
Jun 21, 2009
I'm a proud owner of a DELL xps M1730 laptop. Recently I experienced using my laptop on my television screen (LG). However, recently something went wrong. When I try to establish the HDMI connection my laptop won't change it's screen to the television screen.
It changes the resolution on the laptop screen and that's it. When my friend get's here with his xps m1730 it does work for him.
I tried connect a screen trough the DELL quickset but nothing I do seems to help and it is hard to find information on the web concerning this issue. Maybe it is a very easy procedure and I misschanged some of the settings....
View 6 Replies
View Related
Nov 28, 2008
I am considering a 24" monitor which I need t share as a second on my 1710, as well as the primary on my gaming rig (2X8800GTX SLI).
I want to drive it @ 1920*1200. I don�t want to use the VGA connector for one of the machines, when I do resolution drops to a max of around 1600*1100. So, I am looking at some of the monitors that have DVI and HDMI connectors. The thought was to connect one of the machines via HDMI with a special cable like one from bluejean cable, and use the other straight through, and choose a monitor with an easy one touch toggle between the two.
I read some horror stories that the HDMI link via a DVI-HDMI cable isn't optimal, and someitmes has its own resolution or sync limits. Does anyone know about this?
My other choice is a cheapo DVI switch, but it would be cool just to hit the input button.
View 10 Replies
View Related
Feb 23, 2009
I initially bought a m1210 dell laptop without the integrated camera option. I recently purchased a new cover for my laptop (the old one cracked.) this time it included the camera.
I installed everything together and it all looks fine But Im not sure If Im actually able to plug the cord for the camera anywhere.
View 5 Replies
View Related
Jan 19, 2010
I have a Latitide E6500 with the Nividia Quadro NVS160M graphics card. I'm running Vista Business 32bit. My E6500 vid outs are s-vga and displayport. I use my laptop mainly in my home office and I would like some more real estate, when in the office 1440x900 is just not enough. When looking at monitors displayport does not seem a common input but most have HDMI.
I then looked at monoprice and saw two possible options for displayport -> HDMI, an adapter or a cable. What is the difference between the two and which should I use if I want both audio and video signals transmitted? Or am I stuck using a monitor that has a displayport input?
View 7 Replies
View Related
Feb 4, 2010
I just ordered a Dell Latitude E6500.
Now I'm looking to get a cable lock for it. I know they are not the best at protecting your laptop, but some protection is better than none, besides I just want to lock down to a table while I need to run to the bathroom for a minute.
So, from personal experience, if you have a Dell Latitude E6500/E6400, what locks work/fit best for it? I've done some research and I've tried to read around(couldn't find much on here for the specific laptop).
So far I'm looking at these two (but I have no word from latitude E6500/E6400 users): ..
View 8 Replies
View Related
Jul 19, 2009
I have an XPS M1530, 18 months old, and I am very happy with it.
Over the past few weeks I have noticed a problem with the display, any white parts of the screen image show as red or turquoise colour heavily lined, or black text may have a red halo.
I can easily correct this by changing the angle of tilt of the screen....
View 5 Replies
View Related
Jan 3, 2009
I've just reinstalled my OS because my computer was being really slow. anyways, i've installed the ethernet and wireless card drives,
but i can't access the internet wirelessly. when, i plug in the ethernet cable, it works, but when i use wireless, it just connects to my router,
but says it cant access the internet. i remember fixing it by calling comcast, but it took quite awhile ....
View 3 Replies
View Related
Dec 16, 2011
I am trying to install a Dell TrueMobile 375 Bluetooth module in my Latitude E6420. I have read the instructions in the E6420 Service Manual but it is not obvious where the other end of the cable on the 375 Bluetooth module plugs into the motherboard. The images provided in the Service Manual are of no luck, as they only show where the module goes, not where the cable on the module plugs into a corresponding socket.
View 1 Replies
View Related
Jun 5, 2012
I'm using an Inspiron 1564 and I just tri ed to watch a movie from Internet on my TV
I checked with configuration panel the sound output on HDMI connection, it was activated but not connected and, of course, I got no sound on my TV set.
What did I forget in order to have the sound over HDMI ?
View 7 Replies
View Related
Mar 16, 2013
I was in a game play it then suddenly shut down , when i try to start it up the light from battery flash it up for 1 sec then stop no noise no nothing dont want to start i try remove battery only with cable the light from cable is on i try removing static electricity keep pushing the power button with no cable and battery for 3 minute nothing.
View 1 Replies
View Related
Nov 25, 2013
I have just received my new XPS15 4 days ago, and when I first switched it on it was fine. After 2 day, with the charger plugged in. A message shown on setup screen saying "Charger is plugged in but not charging." I have checked the charger it is definitely a 130W charger, and the LED on the cable is on constant. After window started, same message shown up again. but the battery icon was shown charging, and the battery was showing 100%. So is this a software issue, or hardware? As I have seen may other user are experiencing the same problem.
I have checked the plug was connected correctly.
View 2 Replies
View Related
Mar 12, 2010
How can I tell if I have the .3 or 1.3 MP camera? I bought the 1.3MP but can't seem to get any resolutions close to that.
My mini 9 is running windows XP.
When I go to 'My Computer' and choose the 'Integrated Webcam' option and take a picture, the resolution is 352x288.
View 3 Replies
View Related
