I purchased a DELL XPS13 earlier this year. Until a couple of days ago the web cam worked fine. Now, it does not function. When I try to use it, the light comes on - so it appears it is hard wired - but an image does not appear. I have tried updating the drivers but the computer says the drivers are up to date.
View 6 Replies
I've noticed lately that embedded YouTube videos aren't working in Mobile Safari. Now, I know that the iPhone doesn't have flash, but there is an embedded video player that works with mpg videos (HTML5 sites seem to work fine) as well as YouTube. That way you can just click the video in a website and it will open up the standard video player. But none of those work for me on the iPhone.
I also know that not all YouTube videos are properly encoded for the iPhone. But these are videos that work fine in the YouTube app, their thumbnail just won't load in Mobile Safari for me to click. I get the gray box with the line through the play button instead. What's worse, is there are now sites where this happens that I know for a fact used to work fine. But now I can't get a single embedded YouTube video to work on my iPhone. Is anyone else having this problem? Maybe you could go to a site on your iPhone where the embedded video does work and I can check to show you the problem.
I'm using a 3GS with 3.1.2.
Ive never been able to get the webcam to work on my m1730..
Any ideas?
I am facing the same with my Inspiron 3537 webcam, have done fair bit of reading and tried all solutions provided but none worked.
The integrated webcam or a third party webcam does not work with any program (tried Skype, Dell Webcam Central). I have tried uninstalling and re-installing the cams and drivers but nothing works.
When I turn my Dell Inspiron 7720 on, integrated webcam often does not work. Camera app in Windows 8 shows "there's a problem with a camera", other apps also show error messages or just a black screen.
After several resets the camera may start to work properly till the next reset. The camera is always shown in the Device Manager without errors and in the USBView I see that at least USB descriptors are correct. Moreover, after several disable/enable cycles in device manager the camera may start to work.
I've created two HDD partitions and installed Windows 7 Pro and Windows 8 Pro (both from original ISO files downloaded from MSDN). On clear Win 8 the camera shows the same problem, but on Win 7 it works properly.
There is no camera driver for Inspiron 7720 on the Dell web-site, thus I've used standard Microsoft driver on both Win 7 and Win 8.
I'm still not sure is it a hardware problem, because it is reproduced only with Windows 8. The computer was initially sold with Ubuntu, but Windows 8 is in the list of supported OS.
Camera IDs are: VID = 0C45 (Sonix), PID = 648D, REV = 2206.
I got Inspiron 15R 5520 with Windows 8 and after I installed this OS my webcam doesn't work properly anymore.Well, actually it's work but sometimes. But almost all the time Skype telling me that I should close all the programs that may use the webcam, but I haven't any other apps that uses webcam, Is there some additional drivers or application I should install? BTW it worked properly on Windows 7. And it IS working on Ubuntu so I presume that's a software issue.
View 1 Replies View Relatederror message appears:
"Cyberlink YouCam cannot connect to your webcam (HP Truevision HD)..."
Drivers and software appear to be up to date.
Operating Windows 8.1
Cyberlink YouCam 3.5.6117 (DE) - came with laptop
HP Truevision HD driver 6.3.9600.16384
Just a quick Q about the new S series. I saw people saying the Webcam doesn't work. Is this true for every S series?
View 3 Replies View RelatedI have bought a new HP Pavilion 15-p056ne Notebook PC , which is hardly 25 days old. Now I am getting an error when i try to access Webcam. Imaging devicess option is not available in device manager.
View 6 Replies View RelatedI have tried in Windows 7 64bit and 8 64bit and have had no luck.
I have googled all over and found some hints on this forum to try installing Communication Manager, but it does not solve anything. It's like the camera is not seen.
I know the camera is not broken or disconnected because LINUX of all things can see it and use it.
On the X201 page there are no drivers for the camera at all, only the communication manager install. For Win 8 it is listed that the drivers are built into Windows 8, but as far as I can tell this is not the case, unless i am doing something wrong?
How to get working webcam with X201 at all in Windows?
I have the T540p and the webcam doesn't work at all. When I try using it in Skype and Adobe Connect, I just get the camera icon with a slash through it. I've read in other forums that uninstalling the webcam driver and reinstalling it doens't work. I really need the webcam to work so this is pretty urgent for me.
View 4 Replies View RelatedI have the hp stream 13 for couple days now. The first time I skyped the webcam worked. Now when I try to access the camera it says "to get started connect camera". And so when I try to skype there is no video icon. Under imaging devices I see "hd truevison hd" and when I click on it it says it's not connected. So annoying and frustrating because I just bought this laptop.
View 1 Replies View RelatedI've been reading the post "The Official Studio XPS 1647 Intel Core i5/i7 "Owners' Lounge" and several users comment this without finally reaching a conclusion if the i7-620M is soldered or not.
Curiously reading this news http://www.engadget.com/2010/01/13/c...nto-tiny-mobo/ the image show a processor in socket.
I have a M6400 (in the precision forum there is less info) and dell warraty support offers me change to M6500, with base arrandale and i7-620M. The arrandale base I suppose, will be with the chipset HM55, but I have doubts if I can update with i7-820QM if this is soldered.
I have an E6400 running Vista 64. I've got a virtual PC running Windows XP on that. I'd like the virtual PC to be able to access the Embedded WWAN card, but I'm not having much luck.
The Dell (XP version) of the software does not install on the Virtual PC, claiming the system is not a Dell.
I found a generic copy of VZ Access Manager from Verizon, but that one says the WWAN card is turned off, although the switch is set to on and its not disabled in Vista.
As in terms of a processor with embedded and one without it?
And can anyone confirm if the processor in FZ's is soldered in or not?
This is my processor...
T7500
And if it isn't soldered in, could it be upgraded for this?...
T9900
I have a big problem on my Lenovo U310, my wecamera doesn't work, i don't manage to find neither in device manager and i've tried to reinstall all the drivers, even with recovery button but with zero results.
View 2 Replies View RelatedI have a HP 6530b laptop, and after I upgraded my BIOS to the latest version F.13,
I found my embedded Broadcom Netlink Gigabit Ethernet is missing,and the MAC address in BIOS has changed to 1F2021222324,
I had tried some tools to write the correct MAC address back,but all of them didn't work.
I download the HP Tattoo Utilities,but I can't unzip it without password.
If anyone who have the password for these files.
how to reset the Embedded Controller on the Yoga 13? Or download the program ReadWrite [URL] and post a screenshot of the EC tab so i can restore the values on my Yoga.
View 6 Replies View Relatedif I could get Dell Webcam Center for my HP DV5Z-1000. If it is possible, I would like to know how.
View 6 Replies View RelatedNeed to re-install the Dell Webcam Center Software (not the drivers) on my laptop how to i get them?
View 1 Replies View RelatedA few days before I was going to shipping my Studio 15 off. I looked in the box and low and behold I found the Dell Webcam Center disk that I originally thought that Dell had forgotten to include.
Upon installation I found that the specific version of Dell WC that came with my Studio 15 is not the same one that you find at the downloads center on support.dell.com.
I could never get the downloaded Dell WC to work, even after numerous chats with technical support. No matter how many times I contacted Dell about this, they claimed there is only one version of Dell Webcam Center. Clearly that isn't true .....
I have a VGA plug in my Dell Inspiron 1545 and when I plug in the cord it doesnt work. I have another laptop and I used the same cord and it works. So I guess my VGA doesnt work, what do I have to get to replace the VGA in my laptop?
View 1 Replies View RelatedI have a Dell Latitude E6430 laptop running windows 7 64-bit. When I try to use it with a docking station, the USB ports on the docking station do not work. When I try to use a USB mouse with it, it only works with one of the USB ports. When I try using my printer (HP laserjet 1320) through the USB ports, it doesn't work (it did previously with a Dell latitude E6430 running windows 7 64-bit).
I've installed the latest BIOS upgrade, updated the USB and intel chipset drivers. How do I get these working?
I had my display replaced a couple weeks ago. never thought to test it before he left. now I wanted to turn it on but it says it can't be found.
how do i find out if its actually connected? no lights flash when the pc boots up. i always thought with vista it would flash a blue light at boot up.
What software are people using to take snapshots with the integrated webcam under Windows 7?
View 6 Replies View RelatedI just received my Studio 15 today..
One quick question...is there anyway to disable the webcam? ..
The Dell Downloads section gives me a transaction error ... And when I downloaded it from the FTP site the program says please plug in a device.
View 8 Replies View RelatedMy webcam wont power on, even when I open the Dell webcam console.
On other occasions, it will repeatedly turn itself on and off, with the "budup" noise, like the same noise when you connect a usb device.
It gets very irritating, and it can happen 50 times before it stops(like the other night when I was playing a game,
and was doing nothing in relation to webcams). Its as if im opening and closing the lid, but the lcd isnt effected(perhaps its the lid connection for the webcam wire, if that exists??)
I opened up the M1530, and checked the connection to the motherboard, thanks to another thread here ... M1530 webcam not working....
And the pic supplied here http://forum.notebookreview.com/atta...2&d=1223851321
That seems to be fine, and since reassembled, it wont turn on at all. That happened before I deassembled it, so its not a problem I caused, and could just start to repeatedly turn itself on and off again at any stage.
I just received my M1530 from Dell and noticed that there's a gap between the black border trimming around the webcam and the top of the lid.
If you have the laptop open like you're using, then at the top of the black trim above the screen it starts flush with the colored part on the lid of the laptop but slowly separates towards the middle (right below the silver notch to open the lid) and then goes flush again on the other side.
Is this a normal build? I can post a pic if it's not clear in the post.
Which version of the webcam driver allows for pan/tilt? When I first had the laptop loaded from Dell these features worked in the settings.
I formatted a few times since then and just used the Windows drivers. Now, if I move the slider nothing happens at all.
