Dell :: XPS Quadro Project 99% Complete (+ Overclocked 2500M Results)
Aug 18, 2007
I finally got what is the old school Generation 2 look which IMO looks better. click here if you're interested to see how it looks like. Custom parts include the slot load DVD, keyboard, Atheros card and seagate hard drive. Future plans include quadro card sticker (being mailed) and maybe an internal camera mod.
After assembling everything, I continued to do more benchmarking using 3dmark05 and overclocking under vista. I've heard stories about vista hurting performance, but my god does it murder a good amount of framerates and performance. Non-overclocked, I got a best of 8582 on XP, and 7749 under vista.
After reflashing the vid bios and playing with rivatuner and atitools, I started at 575 core and 650 mem, ran 3dmark05, scored 9320. At first, I was pretty amazed at the score considered what vista did to it when it wasn't overclocked. I thought it would go somewhere where it was under XP (non overclocked). Anywho, I decided to up it a bit to 600 core and 700 mem. This time, 3dmark05 gave me a 9110. I tried it again, this time turning off any programs running in the background, and got a similar score. I lowered both clocks back to what it was when i scored the 9320 and ran it again. This time, it gave me an 8840.
Pretty interesting how these scores came about, but has anyone been in a similar situation? I'm thinking about going back to XP or just make a double partition for it, once i figure out how to w/o wiping half my HD.
View 9 Replies
ADVERTISEMENT
Nov 18, 2007
earlier this year I moved to vista , having good performance under games and a 3dmark05 score of 6500-7500.. , over the course of the year I had many reinstalls cause I wanted to check both X86 and X64 versions of Vista , and decided to stay with x64.
now I don't exactly know when exactly it happend - but a few months back I noticed my 3dmark05 score went down to 3300-3700 , well I thought .. maybe just a bad driver , so over the last 2 months i've tried many driver versions (155.xx , 156,xx , 169.xx from Laptopvideo2go and NBF) and I had the same results with all , I did fresh driver installs so thats not due to bad install or anything like it.
since I'm Currently playing WoW only :P I don't have any other benchmarks to run , Aquamark doesn't work under x64 and I don't know about any good benchmark tools.
something else I noticed which im sure is relevant - I remember that before having those problems my Temps went to the roof while gaming (93-94c) and 73c when idle , now with the new sets of drivers I have about 83c when gaming and 67c idle , now don't get me wrong .. im happy with those temps , but that also means my card doesn't stress itself to the max.
my 1st guess was Powermizer feature , Tried disabling it in the nv_disp.inf without any luck.. I'm not too sure if I managed to disable it.. GPU-Z always "sees" my clocks (500/600) at max.
I also thought about installing an old driver version but honestly I don't remember which drivers were ok to use under vista x64.
so I would really appriciate Ideas , that is before I do format C: ( I really want to avoid it this time).
Dell 1705 , 2GB Ram , T7200 , Quadro 2500m.
View 14 Replies
View Related
Nov 30, 2007
Is this feasible?
Some arsehole on ebay sold me a quadro with a busted connector and refused to refund. I had no idea about the 60 day policy so i was overly patient in waiting for my refund until it was too late.
Anyway, the quadro was intended to replace a 7800go that died some time ago. Is it possible to solder the connector from the dead card onto the quadro? i don't have the skills but i live in thailand and [reasonably skilled] labor is cheap.
View 15 Replies
View Related
Feb 25, 2009
im overclocking my xps 1530 with an 8400m gs gpu and t8300. rite now i overclocked at 580 core clock and 730 memory clock with 64 degrees according to cpuid and got an 1800 on the 3dmark06 score which is horrible...
i havent artifacted on 3dmark06 yet so i was wondering what are some of the speeds u guys overclocked that are stable and not too harming on the mobo and heat...
View 7 Replies
View Related
Jun 6, 2009
I know this is probably a dumb question but can the Precision M6400 with a QX9300 be overclocked?
View 6 Replies
View Related
Sep 29, 2008
I've a question about dell lattitude and dell lattitude.
These two laptop've a different graphic chip. Which one is better for some 3d program like Sketchup, CAD, 3DSMAX. I prefer on Lattitude e6400 , It's look slim and good design. That's OK. But I've a question about a GPU in this laptop. Can it play some games?
- The Sim2
- Need for speed
- Pro Evolution Soccer
If I compare Quardo NVS160 & GFORCE 9300. Which one is better for some 3D program? Quardo NVS?
- Quardo NVS160 & Quardo FX370 - How about a diffrent?
Lattitude or Precision?
View 10 Replies
View Related
Nov 2, 2014
New HP f010na, trying to connect to Samsung tv with HDMI. The laptop can detect the screen, but the tv is showing the message "mode not supported" fro the HDMI connection.
View 6 Replies
View Related
Jan 16, 2009
VAIO Z ULTIMATE UPGRADE PROJECT
I am starting a massive update project on my Vaio Z now that I have collected all the necessary parts. My Z is a VGN-Z27GN and the current configuration is with a 2.53GHz CPU, 4GB RAM, BluRay burner and a 16GB Mtron Pro 7000 Solid State Drive (when I originally ordered it I a couple months ago I had the standard 320GB hard Disk replaced with the SSD). Though it's only 16GB it works for me as I only use it for the OS itself, all my data and files are on external disks.
My current upgrade project now that I've gathered all the parts is:
- X9100 3.06GHz Extreme Edition CPU
- Kingston HyperX low-latency DDR3 SODIMM 4GB
- Solidata X1 SSD 32GB (currently the fastest 240MB/s read, 220MB/s write SSD)
I am posting here a brief benchmark set on Everest with my current configuration and will after the upgrades repeat the tests. I am running Windows XP SP3. Boot-up takes approximately 14 seconds and overall as it is the system is extremely fast and ultra-responsive. As you can see by both the base system's performance and the current Mtron SSD, the numbers are really good as they are.
So, I am eager to see the tests results after the upgrade is complete.
Here's my dilemma:
I have no clue how to open the Vaio Z and get the CPU or the SSD inside (replacing the RAM is obviously a no-brainer). So, I would like to request help (ideally a step-by-step thing) on how to crank the Z open to access the CPU and the HD compartment. I do not have the faintest clue on how to do it.
View 10 Replies
View Related
Oct 2, 2008
I have installed a FX 2500M (rev A02) on a M6300 system board A10 Bios, the card is working but its clock is fixed to 100MHz (100MHz core + 100MHz mem).
FX 2500m doesn't switch to 3D Low mode (200/300) or 3D Performance mode (500/600).
It always remains on 2D Mode (100/100)
Off Course the same card works correctly on M90 System Board.
I have tried many drivers, DELL version and generic version by laptopvideo2go, but same results (always fixed to 100MHz).
I have tried Rivatuner to force clock switch. Same results No Switch
I have even installed a new OS (Vista 64) and with it, I have a strange situation.
With Vista64 (no SP1) original driver supplied by MS (and based, I suppose, on forceware 96.xx) the card seems to works at high clock.
No information tools can be used (with MS Driver) so I can't see which clock are active but 3D performance (games and benchmark) are near the performance achieved with M90.
But once I update the driver by installing a recent version supplied by Nvidia (Dell version or generic is the same), the card blocks to 100MHz even under Vista64.
Unfortunately with MS Driver there are many graphics error and it isn't so usable with 3D application (i.e. games) and furthermore I want to use the card with XP32 (Vista64 has been installed only for tests).
View 10 Replies
View Related
Apr 6, 2009
In short: My e1705 with a quadro 2500m is idling at temperatures at least 10 degrees celsius higher than it was before: 70 degrees with slow fans compared to ~60 with slow fans (I had fans kick in at 65 to bring it back to 60). There have been no hardware/software changes to the system.
So I read the guides about applying AS5 to your GPU and I thought I'd try to get better temps.
I cleaned off all the old compound from both the GPU and the heat spreader, and placed about a pea-sized piece on the GPU (see attachment). It wasn't the most perfect blob of AS5, but volume-wise I think it was pretty close, and ideally it would be smoothed out when I tightened the screws on the heat spreader.
I stuck to a "less is more approach" having heard that all I needed to do was fill the minor imperfections of the contact surfaces.
View 5 Replies
View Related
Sep 20, 2007
I have a t2250 e1705 with a newly installed 2500m with a 130w psu.
I did my unlocked bios mod.
with stock clocks I got 7862 on 3dmark 06 demo.
This is super low? right? a gs can do better right?
what is some good drivers I can use for XP for this card?
View 9 Replies
View Related
Jul 21, 2009
If so are there any settings I need to change or does it do it automatically? I want to use my laptop as a blu-ray player on my HDTV.
View 3 Replies
View Related
Jan 11, 2009
Thought i'd start a new one for this.
Experiences so far:
-Fan isn't on as much as with A09, not running on lower speed when cooling is unnecessary
-Still downclocking!! Though it seems weird because the GPU doesn't go over 81c even with OC @ 600/900/1590.
Besides that all is good actually.
I installed all other new updates etc. also HDD firmware for the seagate.....there is still a weird latency problem that's picked up by dcp latency checker but for me that doesn't give any audible problems (not even when producing music
View 10 Replies
View Related
Dec 7, 2009
hows modern warfare 2 run?
View 8 Replies
View Related
Aug 15, 2009
Since the P8600 is a fairly common CPU on the XPS Studio 13/16 I thought this would be worth posting.
Stability was confirmed at each FID with Orthos for 60 minutes. I chose to disable SuperLFM and IDA. Under 100% load, at 2.4GHz the reported CPU temp dropped almost 12 degrees C. Obviously the difference was less at reduced speeds, but still worthwhile.
I do not notice any difference in the way the computer responds or performs, so as far as I am concerned this is free cooling. I was able to get 4hr 15min on the 9-cell battery with screen brightness @ 30% and low CPU demand (IE8 with wifi) so it probably modestly improves battery life too.
View 10 Replies
View Related
Apr 2, 2009
The Studio XPS 13 should have a lower power consumption than the m4400 because of the small screen size(13"vs15"), lower power CPU(TDP of 25 vs 35), and a lower power graphics card (9200M vs 770M)...
Notebookcheck reports that the XPS 13 lasts 3hrs20min on idle, no wifi, and min brightness and 1hr10min under full load and max brightness...
In contrast they also report that the m440 will last 4hrs31min and 1hr35min respectively...
View 8 Replies
View Related
May 19, 2009
just wondering how you guys get on with modern games with the ati gpu as i may have to get one of these machines and any performance indicators would be nice to see
View 8 Replies
View Related
Sep 17, 2009
Running IntelBurnTest at the highest setting for 5 times, on my HP Laptop with a T9400-2.53ghz it causes the temps to go to 105 degrees which is the max temp and this causes an automatic downclock to 1.6Ghz for sometime. System is stable though. Also the times increase for each run meaning as the system gets hotter the clock downgrade to 1.6ghz is more frequent in each sucessive run.
Is this normal?
View 7 Replies
View Related
Feb 8, 2010
It would be good to know what games work how well with what machines. That might save us some headaches and time to know what the limitations are
View 3 Replies
View Related
Apr 17, 2010
Done some testing of chargers and charge rates. My non scientific findings as follows.
Battery start capacity 91.3%.
After 19 minute charge time -
Using 70watt charger :
Off 98%
On low power 98%
On full power 97%
Using 30watt charger :
Off 98%
On low power 97.5%
On full power 94.5%
To conclude the larger charger mostly maintains charge rate regardless of load on the computer.
The standard 30w charger maintains its charge rate on normal use, yet go to 100% CPU and charge rate drops by around 50%. It possible this could be far worse with an external USB HDD attached, 3G dongle and so on.
It seems that the computer can consume a little more than the 30w charger can output, but only of use in extreme circumstances.
Even with a larger charger the charge rate may drop if you had the computer consuming excessive levels of power, not sure what point this may occur.
Additionally batterymon charge rate indicator did not support the real world test.
View 6 Replies
View Related
Jul 31, 2009
Did anyone manage to overclock the SU3500?
View 4 Replies
View Related
Jul 31, 2009
I've browsed the discussions and have seen problems similar to, but not exactly the same as, my problem, hence the new thread.
Problem: I have a brand new Inspiron 1545 from Dell online. When I type text in Internet Explorer (e.g. webmail applications or this forum), even at a relatively slow speed, many of the keys don't seem to register --
that is, letters or spaces whose keys I press do not show up on the screen. As a result, I must type verrry slowly to make sure that every letter/space shows up, or else go back to re-type it. Strangely, I do not have this problem when typing text in, say, Notepad .....
View 7 Replies
View Related
Feb 20, 2013
I have anĀ Inspiron 17R SE 7720 and ti works great however when I plug it into an external monitor LG W300H the resolution displayed is quite low. I try to choose a higher one but there are no options for higher resolutions. It's actually quite a bit lower than the resolution displayed on the laptops own screen.
View 7 Replies
View Related
Oct 21, 2008
One of the things that truly bugged me about this laptop was that it only shipped with 533MHz RAM (PC2-4200) when the hardware supported 667MHz (PC2-5300). When I started looking to upgrade I was bugged again that the 667MHz memory I was finding had a CAS Latency of 5 where the 533MHz ran at CL4. Then I finally located some 667MHz CL4 memory and decided to pull the trigger.
I am happy with the purchase and would recommend the upgrade to anyone with this laptop. I can't say if I used the best memory benchmarking program, but at the very least I can publish my results using SiSoftware Sandra Lite:
1) Memory Bandwidth test (HIGHER is better)
2) Memory Latency test (LOWER is better for both)
3) Cache & Memory test (HIGHER is better for Combined, LOWER is better for Speed factor)
PC4200 CL4 2x1GB (Original memory)
1) Memory bandwidth 3524 MB/s
2) Memory latency 138 ns, Speed factor 66.0
3) Cache & memory Combined index 9375 MB/s, Speed factor 14.2
PC5300 CL5 2x1GB (borrowed from a friend during the upgrade for reference)
1) Memory bandwidth 3588 MB/s
2) Memory latency 122 ns, Speed factor 63.7
3) Cache & memory Combined index 9645 MB/s, Speed factor 13.3
PC5300 CL4 2x1GB
1) Memory Bandwidth: 3663 MB/s
2) Memory Latency: 114 ns, Speed factor 55.2
3) Cache & Memory: Combined index 9910 MB/s, Speed factor 12.6.......
View 5 Replies
View Related
Jul 10, 2009
I just want to show you how much overclock you can expect from the HD4650 Mobile graphic card. Wait for 1080P Full HD results.
I don't have external monitor to do 1280x1024 standard test, I'll post the results next week when my monitor arrived.
( Due to poor 128Bit memory controller VGA can't handle 1080P res gaming even with No AA/All settings Low & Crysis FPS stay below 25. However 720P gaming is superb & Crysis stay above 36FPS all time with NO AA/ All Medium setting)
Notebook : Sony VAIO VGN-FW41M/H (UK Version)
VGA Card : ATI HD4650 Mobile Card (512MB DDR3)
ATI Driver version : 9.6
Benchmarked Resolution : 1280x720
Benchmarked software : 3DMark06
Default clock speed results
Overclocked Results
View 10 Replies
View Related
Jan 10, 2009
What the latest Dell notebook is available nvidia quadro as its graphic card?
View 6 Replies
View Related
Mar 28, 2008
I am a fully certified DCSE for dell and I was just certifying today on the 2008 systems and noticed that the vcard instructions for the M1710 are identical to the Precision 6300.
the X800 really had 16 pipes, you can damm near oc the 7900GS' core double, amongst other surprises... It would explain why dell may have held out on this card until the dual 8800's came out for the M1730... Who would buy a 1730 w/8700's when you can get a new card for your 1710... Timing me thinks... It wouldn't hurt dell too much to release that card now since the duals are out and are obviously faster...
View 15 Replies
View Related
Mar 11, 2008
I have been out of high school for two years now and working as a waiter and I am still living with my parents. My dad told me to do something with my life or move out .
Anyway, I decided to go to ITT tech for digital entertainment and Game Design. I guess my dad was glad because he said that I could have his old XPS M1710. Well, my buddy is in school for game design and said that I have to have Quadro graphics for game design.
But, I can't find anything that says that there is such a thing as Quadro with a M1710.
My buddy has an Alienware notebook so he is no help with my Dell, but he swaers that M1710s can have the Quadro. I tried calling Dell and they said that M1710 don't come with Quadros.
Anyway, is there such a thing as Quadro M1710? If so how do I get it. Do you need a new motherboard or is a card and how much would it cost me. Right now my M1710 has a ATI x1400 video and from what I read won't help me at all in school.
View 15 Replies
View Related
Sep 3, 2009
according to this site linkhttp://www.notebookcheck.net/Mobile-...ist.844.0.html
it appears to be apart from a few minor things but basically were talking 280m power here ?
View 9 Replies
View Related
May 11, 2009
Why is a lot of people on ebay selling the m2400 with a quadro fx 380
Dell dont have the 380 on their homepage and i cant find it on nvidias homepage eiter
View 4 Replies
View Related