Dell :: Exact Overclocking Tool For My D810
Feb 6, 2008
This notebook has been out for a while, and I’m sure the stuff I want to do now have already been done. So…I’m hoping for some good answers, so I can pursue the things I want to do with my old trusty. Considering I don’t have any other CPU right now, please leave out the pin mod option at this time. I’m trying to work with what I have right now,
First I would like to “Overclock” the CPU (Pentium M 740), so let me know when, what, where and which programs you’ve used to overclock this particular model. Will do the overclocking first, to see if I want to shell out something on a Pentium M 770
Now that the most important part of what I want to do is out of the way; would an x1800 work in my notebook?
View 12 Replies
ADVERTISEMENT
Feb 23, 2009
3 different Latitude D810's that we wanted to add some life to. So we purchased 3 SSD drives,
two 64GB IDE/ATA Transcend MLC based units and 1 RiData 16GB SLC IDE/ATAunit. (Yes, the SLC is far faster with writing than the MLC drives).
Using our standard image, everything works fine. Except when removing the power cord from the back of the unit, it goes to a black screen, any hard drive (SSD drive) activity ceases.
When doing the same thing with a traditional hard drive, the screens blip black for a brief moment, but the computer keeps running as expected.
View 4 Replies
View Related
Feb 18, 2009
i bought it from a friend who said the display had stopped working so first off i plugged it into an external moniter and it worked great so thought graphics card is ok must be lcd or inverter bought an inverter still no good figured lcd so i purchased a new one plugged it all up no good last thing i tried an lcd ribbon and its still not doing anything its beating me up now what else could it be
View 9 Replies
View Related
Mar 27, 2008
I’m about to get a 6800go in a couple of weeks, and I’m going to almost hate messing with something that has served me so well. I’m only a gamer on my Desktop, so I don’t know what the 6800go will bring me different than what I already have. I get 90fps in low setting playing Quake 4 already, so I guess the only thing I’ll gain there is the shadowing and maybe 90fps on medium settings? One more thing might be a turn on is playing COD4 on the laptop now, but the 15” screen on the D810 just can’t add up to the 2007FP of my Desktop.
So since I have time before I actually get the card, I want to know what you think of the 6800go and what fun it might bring me over my x600? Right now I can play FEAR, Quake 4 and Counter Strike with no problems, could be RAM related since I have 2GB.
I just need something to do to pass the wait time, so let it roll!
If there's any special drivers I need,
View 15 Replies
View Related
Oct 2, 2008
My E6500:
2x2GB RAM
P9500 CPU
250GB HD FFS
NVS 160M display card
DVD R/W
Dell 370 Bluetooth
Intel 5300 Wireless
WUXGA screen
Internal modem
Without battery: 2580g/5.68lb
6-cell: 328g/0.72lb
9-cell: 471g/1.04lb
View 10 Replies
View Related
Jan 8, 2008
Had to reformat a Latitude D810 and reinstall XP OS. Since all drivers were wiped from drive I downloaded them from Dell Support. Have one (1) remaining device in Device Manager with yellow exclamation mark on it labeled Multiport Communications Port (COM3). Cannot find any driver in Dell Support that correlates to this device.Â
View 9 Replies
View Related
Jul 28, 2009
I have an Acer 5920g notebook and I can find, in various places, lists giving the specification of "the" 5920G.
However there is no such thing as a 5920g notebook - what we have is a range of laptops all with a subset of the full list.
How can I get a the exact spec for my laptop?
There is a number on the bacik of the notebook which tells Acer eaxctly what is inside my notebook but how can I get access to this information?
View 5 Replies
View Related
Jan 30, 2010
What exact CPUs are Apple using on their MacBooks?
All I can see is that its a Core2Duo 2.5GHz, 2.8GHz ....
View 7 Replies
View Related
Jan 10, 2015
What is the exact plug size of Acer Aspire 5755g power socket?
I lost my old charger and I need to buy a new one but I want to make sure that I but the correct one.
View 2 Replies
View Related
Dec 20, 2009
As I've previously posted, my M1730 developed a problem with it's pair of 8800M GTXs back in September. After weeks and weeks of no service call happening, Dell finally agreed to refund me the full price of the laptop. When the money was received, I turned around and handed it right back for a M17x that I received a good quote for. When I ordered in earlier this month, I was told that there was a delay on a component and the estimated delivery date given was the 13th of January. Since I'd had no gaming laptop since September, I didn't really mind. I was checked the Order Status tool every day, but there was no change in the EDD.
On Friday December 11th I receive an email from Dell/UPS stating that they planned to deliver my laptop on Friday December 18th between 09:00 and 18:00. I checked the Order Status tool and it showed my laptop status as changed to 'Shipped.' Excellent! The email contained a UPS tracking code which was recognised on their website. The status was 'Billing Information Received' which means that they know there's a package to go somewhere, but they don't have it yet. Or so I've since been told.
Can you guess where this is heading? Friday 18th comes and goes and I've not received a laptop. I stayed in all day, most hermit-like, so there's no way they missed me. No card. Finally called UPS and they say that they haven't received the laptop yet.
So I checked the Dell Order Status page again and it definitely states that it shipped on the 11th. So where did it go? I don't mind waiting. I do mind waiting indoors for something that's not coming. Dell have also changed their 'Contact Customer Care' policy and there are no longer any phone numbers listed for them. It's now email only with a 24 hour response time.
View 15 Replies
View Related
May 4, 2008
I'm going RAID 0 with my new 1730, and will be going 2 X 160GB in RAID 0.
The question is will windows defrag tool, know how to properly handle the 1/2 and 1/2 file fragments on both drives?
I would assume that it would, by simply moving a fragment and it's assosiated 1/2 on the other drive to the same spot on both disks? Or would it not?
If it's not, what defrag tools are RAID 0 compatible?
A serious question when you consider VISTA's "advanced" or more correctly "complicated" page/swap file use and RAID 0. The way I see it, is under defragmentation a raid configuration could be realy hurt by fragmentation as you effectively double the normal rate of fragmentation in a RAID configuration.
View 10 Replies
View Related
Apr 20, 2009
Its my first post and i've tried searching but cannot find the info i'm after. I got my Studio XPS13 today and installed Windows 7 64 Bit on it. I have installed all the drivers ok but i cannot get the connection software anywhere to use the WWAN.
Maybe it's late and i'm missing it somewhere but would anybody be able to point me in the right direction.
View 8 Replies
View Related
Jul 30, 2009
i just recently bought an acer 8930g laptop, when i log into msn the synaptic tool crashes causing the scroll on the touchpad to stop functioning, however i have uninstalled the touchpad diver and got another from manufacturs website and installed it, it still doesnt seem to solve the issue, i have done a system restore, that didnt help either.
i think its msn that causes it to crash but not 100% sure tho as i have tried to test to see what causes it to crash, i did this by loggin into msn out of 10 times about 7 of the time it crashed, so am pretty sure its msn, maybe i might be wrong and please correct if i am.
below i will paste the error that i get, i got this by going on the event viewer.
on the general tab:
Faulting application SynTPEnh.exe, version 10.2.4.1, time stamp 0x47f6c0c1, faulting module SynTPEnh.exe, version 10.2.4.1, time stamp 0x47f6c0c1, exception code 0xc0000409, fault offset 0x0002988c, process id 0x17bc, application start time 0x01ca1060bf9b1946.
and on the details tab:
System
- Provider
[ Name] Application Error
- EventID 1000
[ Qualifiers] 0
Level 2
Task 100
Keywords 0x80000000000000
- TimeCreated
[ SystemTime] 2009-07-29T19:46:30.000Z
EventRecordID 3194
Channel Application
Computer Waseem-laptop
Security...............
View 10 Replies
View Related
Feb 22, 2009
I am looking for a tool to control the CPU speed with my M6400, RMClock does not work with Vista x64
View 3 Replies
View Related
Dec 17, 2009
i hv just bought a new laptop of HP. it has everythng but i need to monitor the wireless signal strength cause we have placed so many aps but the ssid is same..so for connecting to a perticuler ap i will be needing a tool which can show me the % of wireless signal strength and the ssid..
View 4 Replies
View Related
Jun 30, 2013
I purchased a refurbished V570 for my son. Just received it the other day. Every time it boots up, the System Preparation Tool 3.1.4 boots up. Whenever I turn the laptop off and start it again, instead of showing the regular Windows 7 start up screen, it has a "Setting up your computer for the first time" (or something like that) screen. Once up and running, the tool pops up again. Windows 7 runs perfectly, no issues, I installed a bunch of things for him, but obviously this tool shouldn't be starting up and the laptop shouldn't be starting with the setup screen every time.
Â
I did some digging around the internet, there is a bunch of info on this, but everything indicates that the Windows installation was not properly finished on my laptop. I went to all the places that are listed to possibly remove the tool, but can't find any references except a bunch in the registry which I don't really want to mess with on a "new" computer.
View 3 Replies
View Related
Nov 22, 2014
I have recently upgraded HP Probook 4431s to Win8.1 Prof. 64-bit.
Â
I couldn't find driver for HP Protect Tool and Face Recongnition under drivers list.
Â
Where can i find them if drivers already available.
View 3 Replies
View Related
Jun 27, 2014
I have HP ENVY 15-j101ex NB. I installed UBUNTU and everything on the Hard disk deleted, Can i restore the windows 8.1 OS and How ? The Notebook still on the Warranty...
View 3 Replies
View Related
Jan 26, 2013
I have an HP Mini 1103530NR with Quickweb installed. The HP Quickweb configuration tool refers me to [URL] .... for a tutorial video, but the splashtop website gives an error message "page not found".
Â
Is there someplace else I can view the Quickweb tutorial?
View 1 Replies
View Related
Apr 24, 2009
I have a brand new xps16, running wonderfully.
I've modded the desktop Catalyst 9.4 drivers, games perform well, better than the provided Dell Catalyst.
What I would like to do however, is be able to alter the GPU clocks. Not by much, just a little.
I've tried AMD GPU clock tool; but this does not let me fix new clock values for the ATI 3670. I enter a new value, and they revert to the default right away
View 10 Replies
View Related
Apr 27, 2008
Is there a way to overclock the CPU in my Vostro??? If so, what programs should I use to do this.
View 15 Replies
View Related
Dec 31, 2009
i bought GTA IV the oher day and installed it on my laptop so i start running it and it had put restrictions on my specs -_- is there anyway i can turn these off i looked at a few sites that say you have to run it on the command line ive tried that but it wont work :
i have a Dell XPS specs are in sig + i overclocked my dual nVidia 8700m GTs to
650 core clock
1100 Memory clock
and 1600 shader clock
aswell is there anyway to OC my CPU?
View 10 Replies
View Related
Apr 30, 2014
Every time I run the Client System Update tool and check for updates I get the error message "Check for updates failed"
I have a Dell Latitude E6430 running Windows 7 SP1 64 bit and I am connected to the internet...
View 2 Replies
View Related
Oct 22, 2007
I'm getting my E1705 back from repair tomorrow and I'm going to push the thing to it's limits. I used to frequent these forums before they were redesigned, and it seems my old user name is gone as well -- so I get to start back over.
Using I8kfangui, and a PA-13 or a PA-15 -- whats the easiest way to push the laptop to it's "safest" limits.
I noticed the "new" JuanLu bios lets you overclock via software now which is nice. Depending on my bios revision once I can check again, which should I pick? I hear of some folks using the GTX bios on the GS, but like I said -- I'm so out of the loop now that it's not funny.
I'll probably look into dropping a FX2500 in there at some point in the near future, is there a guide to hardmodding the E1705 like this?
Anyhow, if some veterans will chime in and give this newb all over again some guidance to do this right, let me know.
View 13 Replies
View Related
Jan 1, 2008
I will overclock my 7900GS, what i the best clock for my 7900gs( i had already flash my bios for the 7900, but i dont know witch max clock can i take)-- i will play Crysis, this lags!
View 15 Replies
View Related
Sep 11, 2007
I've had my E1705 for 4 months now, and I have unlocked my bios so that I can overclock my videocard. Now I want to see if I can overclock my CPU. It's a T7200, but unfortuanlly I can't find a thread on that any where.
View 11 Replies
View Related
Nov 1, 2007
i'm an owner of a m90, which i recently received from dell in substituion of an e1705.
Talking with abo, the developer of setFSB, it seems the m90 mounts a Cypress clock generator. There are real possibilities he can develop a version of setfsb that can interact with our notebook. The only thing we need now is the pll number (something like
cyxxxxx).
It's written on a chip on the motherboard. If someone can help me finding it, we will probably enjoy a new crysis experience
View 15 Replies
View Related
Oct 17, 2007
I have a e1705 Geforce go 7900gs oc'd to 450/600. Also I have the power supply that is included with the laptop 90watts. I have seen people here in forums that o'cd there card up to 600 core or more. I flashed my rom using the 375/507 to unlock my bios and then i use rivatuner to overclock my video card coz I want to know the limit of my card. And it reached 455/600 so i underclock it to 450 just for safe distance.
Now, I am using ntune to o'c my card and there is no testing whether it will work with the core I specified so I assume again that its 450/600.
My questions will be,
1. What is the max core/mem overclock that is safe for my 90 watts power supply w/o increasing the voltage to 1.24volts?
2. I create a profile in ntune that I enable the overclock (450/600) everytime I will play 3d games and I get it back (370/507) . Is that ok? Will it harm my videocard?
I got a rev 1 card. I am using a windows vista w/ dell performance driver, 2gb ram and 1.73ghz core duo cpu. Weird I got 152 increase in score in 2005 3dmark when using vista to xp . My score is 7196. And also I don't want to use nibitor to o'cd my card .
View 15 Replies
View Related
Mar 9, 2008
1. If I overclock my GPU's does that void my complete care warranty?
2. How can I overclock the 2nd GPU with RivaTuner?
3. How hard can I push the 8700's?
View 15 Replies
View Related
Mar 8, 2009
Can it be done? I have never dared to overclock a laptop due to them being so hot in the first place but i was wondering if anyone has tried on this laptop yet?
View 6 Replies
View Related
