i hv just bought a new laptop of HP. it has everythng but i need to monitor the wireless signal strength cause we have placed so many aps but the ssid is same..so for connecting to a perticuler ap i will be needing a tool which can show me the % of wireless signal strength and the ssid..
View 4 Repliesjust got a DV6 with 4650 GPU. Usually I use HW monitor and the like but I notice HW monitor does not pick up the temp for the GPU. I have tried using the AMD tool and Speed fan, neither see the GPU, GPUz sees the GPU and gives me temperature information which as far as I can see is wrong (says that the GPU is only 42 degrees under full load and never changes from between 37-42 degrees). So does any one out there have a temperature monitoring utility that will WORK with an ATI 4650 and give some representation of what its temp is?
View 10 Replies View RelatedI'm owner of E6400, and i'm consider now to buy Dell Wirless 5530 on ebay for 60$ include shipping (pretty cheap).
I unserstand that I can install it only if my E6400 came with preparation for it (antenna for it).
How could I check if my notebook have the extra antenna?
And if there isn't antenna installed, Can I install it? (in ebay it cost 10$)
I saw that there is place to put sim card, and there is antenna connectors for the wwan cards
Got my self a new HP DV5-1110, Athlon X2, 3450.
But can anybody recommend any good monitoring software for Vista, 32bit?
On my desktop I use "dtemp", to show the harddrive temp in the sys tray, but dtemp cant read the hdd temp on my HP
And an another program for showing the cpu load or/and cpu clock in the sys tray..? tried NHC 2 pre 06, but it hangs when I go to settings to configure the program..
someone asked if they had a temp monitoring solution for the studio 1737 as i8kfan doesnt work...
View 5 Replies View RelatedMy GF just found a temp monitoring program for her Dell for free on line that always show her temps inside her laptop & its seems pretty cool & now I want one for my New MBP15.
What killed my last laptop was over heating issues..
I have a Dell XPS M1330 PC and am currently using a trial version of Everest Ultimate to monitor primarily its temperature, but I also use it occasionally to check its components.
The trial version ends in 8 days and I am looking for another software monitoring program, preferably freeware, to replace it, but I am also willing to pay reasonably for quality monitoring software.
Reviewing the posts on the Notebook Forums, HWMonitor seems to be widely recommended and used. Would you agree or do you have other recommendations for accurate temperature monitoring software? Is there any freeware that can monitor the various functions of the M1330 PC like Everest does?
I also had a question about the Everest Ultimate monitoring program (made by Lavalys). I found the following on the Lavalys website:
---------------------------------------
http://www.lavalys.com/support.php?category=22&lang=en
Q#21:Is it possible to detect temperatures, voltage values and fan status of Dell computers?
Just got me an Aspire 5536G (2.2 ghz Turion, ATI 4570) and it is running hot! After a few minutes of Prime95 the CPU gets up in the 90s (Celcius), and 15-20 minutes of gaming gets it there too.
Is there a tool that lets me undervolt and lower clocks? The BIOS is very anemic, so I cant set things there.
I am also looking for a good fan speed and temp monitoring program. I have tried a few but only CPUID HWMonitor reports temps for both cores and two more sensors (presumably located near the GPU). SpeedFan only reports one temperatur.
I am not sure if I am the only one who had problems with the XPS 1640 so far. So I would like to hear your Dell Stories as well!
Uhm it all started with me unpacking the Notebook and noticing a french manual instead of a German one..
that wasnt too bad but once I noticed that the right speaker was not sounding too well (it sounded pretty messed up especially once I turned the notebook a little up)
i just recently bought an acer 8930g laptop, when i log into msn the synaptic tool crashes causing the scroll on the touchpad to stop functioning, however i have uninstalled the touchpad diver and got another from manufacturs website and installed it, it still doesnt seem to solve the issue, i have done a system restore, that didnt help either.
i think its msn that causes it to crash but not 100% sure tho as i have tried to test to see what causes it to crash, i did this by loggin into msn out of 10 times about 7 of the time it crashed, so am pretty sure its msn, maybe i might be wrong and please correct if i am.
below i will paste the error that i get, i got this by going on the event viewer.
on the general tab:
Faulting application SynTPEnh.exe, version 10.2.4.1, time stamp 0x47f6c0c1, faulting module SynTPEnh.exe, version 10.2.4.1, time stamp 0x47f6c0c1, exception code 0xc0000409, fault offset 0x0002988c, process id 0x17bc, application start time 0x01ca1060bf9b1946.
and on the details tab:
System
- Provider
[ Name] Application Error
- EventID 1000
[ Qualifiers] 0
Level 2
Task 100
Keywords 0x80000000000000
- TimeCreated
[ SystemTime] 2009-07-29T19:46:30.000Z
EventRecordID 3194
Channel Application
Computer Waseem-laptop
Security...............
As I've previously posted, my M1730 developed a problem with it's pair of 8800M GTXs back in September. After weeks and weeks of no service call happening, Dell finally agreed to refund me the full price of the laptop. When the money was received, I turned around and handed it right back for a M17x that I received a good quote for. When I ordered in earlier this month, I was told that there was a delay on a component and the estimated delivery date given was the 13th of January. Since I'd had no gaming laptop since September, I didn't really mind. I was checked the Order Status tool every day, but there was no change in the EDD.
On Friday December 11th I receive an email from Dell/UPS stating that they planned to deliver my laptop on Friday December 18th between 09:00 and 18:00. I checked the Order Status tool and it showed my laptop status as changed to 'Shipped.' Excellent! The email contained a UPS tracking code which was recognised on their website. The status was 'Billing Information Received' which means that they know there's a package to go somewhere, but they don't have it yet. Or so I've since been told.
Can you guess where this is heading? Friday 18th comes and goes and I've not received a laptop. I stayed in all day, most hermit-like, so there's no way they missed me. No card. Finally called UPS and they say that they haven't received the laptop yet.
So I checked the Dell Order Status page again and it definitely states that it shipped on the 11th. So where did it go? I don't mind waiting. I do mind waiting indoors for something that's not coming. Dell have also changed their 'Contact Customer Care' policy and there are no longer any phone numbers listed for them. It's now email only with a 24 hour response time.
This notebook has been out for a while, and I’m sure the stuff I want to do now have already been done. So…I’m hoping for some good answers, so I can pursue the things I want to do with my old trusty. Considering I don’t have any other CPU right now, please leave out the pin mod option at this time. I’m trying to work with what I have right now,
First I would like to “Overclock” the CPU (Pentium M 740), so let me know when, what, where and which programs you’ve used to overclock this particular model. Will do the overclocking first, to see if I want to shell out something on a Pentium M 770
Now that the most important part of what I want to do is out of the way; would an x1800 work in my notebook?
I'm going RAID 0 with my new 1730, and will be going 2 X 160GB in RAID 0.
The question is will windows defrag tool, know how to properly handle the 1/2 and 1/2 file fragments on both drives?
I would assume that it would, by simply moving a fragment and it's assosiated 1/2 on the other drive to the same spot on both disks? Or would it not?
If it's not, what defrag tools are RAID 0 compatible?
A serious question when you consider VISTA's "advanced" or more correctly "complicated" page/swap file use and RAID 0. The way I see it, is under defragmentation a raid configuration could be realy hurt by fragmentation as you effectively double the normal rate of fragmentation in a RAID configuration.
Its my first post and i've tried searching but cannot find the info i'm after. I got my Studio XPS13 today and installed Windows 7 64 Bit on it. I have installed all the drivers ok but i cannot get the connection software anywhere to use the WWAN.
Maybe it's late and i'm missing it somewhere but would anybody be able to point me in the right direction.
I purchased a refurbished V570 for my son. Just received it the other day. Every time it boots up, the System Preparation Tool 3.1.4 boots up. Whenever I turn the laptop off and start it again, instead of showing the regular Windows 7 start up screen, it has a "Setting up your computer for the first time" (or something like that) screen. Once up and running, the tool pops up again. Windows 7 runs perfectly, no issues, I installed a bunch of things for him, but obviously this tool shouldn't be starting up and the laptop shouldn't be starting with the setup screen every time.
Â
I did some digging around the internet, there is a bunch of info on this, but everything indicates that the Windows installation was not properly finished on my laptop. I went to all the places that are listed to possibly remove the tool, but can't find any references except a bunch in the registry which I don't really want to mess with on a "new" computer.
I have recently upgraded HP Probook 4431s to Win8.1 Prof. 64-bit.
Â
I couldn't find driver for HP Protect Tool and Face Recongnition under drivers list.
Â
Where can i find them if drivers already available.
I am looking for a tool to control the CPU speed with my M6400, RMClock does not work with Vista x64
View 3 Replies View RelatedI have HP ENVY 15-j101ex NB. I installed UBUNTU and everything on the Hard disk deleted, Can i restore the windows 8.1 OS and How ? The Notebook still on the Warranty...
View 3 Replies View Related I have an HP Mini 1103530NR with Quickweb installed. The HP Quickweb configuration tool refers me to [URL] .... for a tutorial video, but the splashtop website gives an error message "page not found".
Â
Is there someplace else I can view the Quickweb tutorial?
I have a brand new xps16, running wonderfully.
I've modded the desktop Catalyst 9.4 drivers, games perform well, better than the provided Dell Catalyst.
What I would like to do however, is be able to alter the GPU clocks. Not by much, just a little.
I've tried AMD GPU clock tool; but this does not let me fix new clock values for the ATI 3670. I enter a new value, and they revert to the default right away
Every time I run the Client System Update tool and check for updates I get the error message "Check for updates failed"
I have a Dell Latitude E6430 running Windows 7 SP1 64 bit and I am connected to the internet...
I have got Notebook Compaq Presario.. I cant connect to the internet using the wireless connection.. the reason is that i accidentally did some operations, and cannot switch on the light on the front panel of the notebook.. it does not work, i mean the light of the wireless connection button does not light.... I turned off something...
View 8 Replies View RelatedCan We Change Processor Of Hp Compaq Presario Which Is Having Amd Processor Right Now
View 3 Replies View Relatedi am looking to actually look, touch , try an HDX 16. But can't find a store that carries it.
View 5 Replies View Relatedwhere i could get most or all drivers for windows xp for the hdx 16t 1100,
View 5 Replies View RelatedDoes anyone have a good way to OC this laptop other than using ClockGen? I am basically wondering if there is a BIOS option. I know there are some OC guides out there, but this laptop is almost 3 years old, and as far as I can tell does not have an option in the BIOS. Also, my proc is the T2600, not the one is this review, but other than that exactly the same. I am looking to play around with this because it is old and I dont care too much if I fry it since my new hotness is on the way.
View 3 Replies View Related1. How do I make it so the volume 'screen' (the little pop-up) doesn't show up when I chance the volume?
2. Is there a way to completely remove and disable the fingerprint reader?
I'm using Vista Home Premium 64 bit.
By the looks of the bottom of my laptop it seems it might be mxm compatible as there are lots of removable pieces... including one that looks alot like an mxm slot. I know that this laptop can be configured to come with the 9200m. This is a fairly brand new model but could someone tell me whether this thin is mxm compatible?
View 4 Replies View RelatedIve just about had it with Vista on my laptop and want to try a new OS before I junk this thing. Is anyone running Win7 or Ubuntu on a HP DV5z AMD 64 bit laptop? The machine is about a year old and I have 4gb of RAM and the thing is a dog. Ive used Ubuntu in the past on Dell laptops and its a pain to get everything running wireless drivers, flash, etc. Win7 being a RC may or may not have everything up to speed on for my machine.
So, if you have Win7 or Ubuntu on a HP DV5z please give me a shout, good or bad.
I have a DV5-1155ee, here are teh sp3cs:
HP Pavilion DV5-1155Intel Mobile Core2 Duo T9400 2.53 GHz. (Montevina 6 MB L2 Cache)4 GB DDR2 RAM15.4” WXGA ScreennVIDIA GeForce 9600M GT 512 MB320 GB HDDIntegrated Webcam, Wireless, Bluetooth, BlurayWindows Vista Home Premium 32 Bit
product number: FT115EA#ABV
serial number: CNF8374VSL
what would my HDD RPM rotation speed be?