Not sure who moved my post to "price check", but if I wanted it there I would have put it there as I am looking for opinions from Sony users and owners who frequent this specific thread and possibly not the price check thread. Thanks
I am preparing to sell my Z590, it has 4GB of RAM, original Sony restore disks, 320GB 7200 RPM HD and I believe a 2.4Ghz P8600 processor, slimline ac adapter and the Sony high resolution screen.
I just recently placed an order for a Studio 1737 (replacing an Inspiron E1705). It comes with a 1 year warranty.
I'm debating whether it's worth spending $200+ to upgrade to a Dell 3 year warranty or should I get a 3 year Square Trade Warranty for less than $150 (I can get one for around $120 after a coupon)?
I have a Dell Inspiron 1520 laptop. I purchased an OEM system builder Pack Microsoft Win Home Prem 7-64 bit English disk that won't install on my computer.
I am assuming my laptop is 32 bit, not 64 bit. Is there a way around this? I now have the disk for sale on Ebay but would like to be able to figure out how to use it either on my laptop or on my HP desktop.........
i have a dell studio 1535, work very well, at home anyway, connection wise. I am with virgin media, when i go to my GF place or work or anywhere i can't connect to any wireless network,
Don't have any problem at home to connect.
I managed to find that the internet IP ping failed when running a connection diagnostic.
I have been searching all over various forums and tech sites for an answer. Currently I have 2 GB of ram in my 1520 that's running Home Premium. I've done a clean install after adding the 1 GB Turbo Cache module. It was only about $30.00 and figured worth the risk to try for performance gains. I haven't felt much there.
Does anyone have any positive feedback on performance when upgrading from 2 GB to 4 GB of RAM? I am running 32 BIT and don't care that the full 4 GB are not recognized. I don't want to waste money unless it will make some difference.
Aside from the clean install, I've been using X-Setup Pro, Tweak UAC and TweakIV for optimizing the settings for a little speed. I've also tweaked the services according to Black Viper's web site. The software tweaking has helped immensely.
I appreciate anyone's feedback on upgrading to 4 GB of ram. Sorry if this has been an old discussion getting beat up once again. However, prices are right around $75.00 for 4 GB of G Skill from Newegg.
Dell laptop Inspiron 1300 tag DM1492J. When trying to boot from hard drive it only loads to Windows XP long in screen then goes to a blank blue screen. It will not load in safe mode nor can I repair/reinstall XP from DVD/CD drive. I have entered BIOS and placed DVD/CD drive first disabling all other options but still cannot get it to load XP.
I'm almost down to my choice on laptop the Toshiba at bestbuy seems to be winning but today I seen an offer for the xps 16 that comes with a 2 year basic warranty which is in home repair after phone Diagnostics,Has anybody used this service?Do they come out right away? ....
i'm thinking about selling my Dell Mini 9 and i would like to know how to format my SSD and reinstall Windows XP Home so it is all fresh and new for it's new user
I'm looking at the Vostro 1720 and there is no option for a 64 bit verson of Windows 7 Home Premium. It comes with the 32 bit verson and I dont want to play $120 for the Windows 7 Ultimate 64 bit
Dell never gave my girlfriend a disc to re-install Vista.
Actually... I'm playing the role of Tech Support Guy (even speaking to her with a difficult-to-understand Indian accent!!).
She had a crash, so I used VistaPE to get her data off of the computer. Now, I wanna restore Vista to the original factory settings. Sounds easy enough... use f8, right?
Wrong... it won't work in my case. The recovery partition is still there... I just can't access it. The operating system won't boot up at all. I used a non-Dell Vista Home Premium disc to access the Vista System Recovery option, but that doesn't help. I can't get at Dell's recovery partition.
I figure if I had a re-installation disc that's actually from Dell, I could access Vista's System Recovery feature that includes the Dell option to restore the computer to the original factory settings. Problem is, I can't get ahold of one.
Does anybody know where I can find one without going directly to the Dell website? I think Dell has the worst customer service on the planet and I would pay someone to hit me in the head with a sledgehammer before I'd spend one dollar on a Dell product. I've been scouring the internet for two days and can't seem to find a stray copy of what I need.
The computer came factory-installed with the 32-bit (x86) Windows Vista Home Premium.
Yeah... you read that right: a DELL with VISTA!! Could it get any worse?!
This whole thing is driving me bat-sh*t crazy.
I hate Dell... I thank you all in advance for any help that you can give.
Maybe someone would be so kind as to post an .iso image of their own disc?!
I have a Dell XPS 1530 and at school, my computer connects to the wireless internet fine and has normal speed as if it were connected to an ethernet cord, but at home,
it connects but is extremely slow. There are other laptops that connect to the router and they have fast speeds. My computer has vista home premium, 4 gb, intel core 2 duo cpu, t8300 @ 2.40 ghz.
I am planning to buy Dell XPX 1530 or HP DV4 1131tx for purely to run virtual machines. is there any possibility to make it dual boot with Windows server 2003 standard edition or Win XP 64 bit? If possible then what are features i won't be able use for above both notebooks.
I installed some windows updates to my computer. The next time I turned on my computer it didn't act normal at all. It went to a start-up repair screen which scanned for a long time only to tell me "start-up repair cannot fix this computer" so I shut down and left my computer. I called Dell's support line and talked with technical assistance, the guy had me run some tests and in the end told me that there was nothing wrong with the hard drive and that it was my systems software that was the problem. didn't wanna restore at that point because wanted to save my pictures.
I ended up taking the hard drive out, transferring pictures onto my brothers computer and then I did a full system restore ( by tapping f8, choosing repair my PC, then choosing "Dell data safe restore and emergency backup" in the system recovery options screen. ) This actually worked and I restored my computer, however after installing updates again (quite a few too, when I shut down my computer it said installing update 1 of 72?! )
My computer went back to the start up repair screen and did the same thing as before. restored my computer one more time, and now again after updates were installed my computer will not work correctly. I do have the windows product key under the battery but would like to know how I can fix this problem. Will have to reinstall my windows software?
It seems like every time I delete a file, I get a whit bar on my desk top that says Delete and the only way on getting ride of it is to restart my laptop, this white bar is on my display all the time on mater what I am doing.
This last time, I deleted the contents or my of my recycle Bin
my new Studio 1737 did not come with McAfee Security Center or Microsoft Office Home & Student pre loaded...
can I just pop them in my cd drive and install them? Should I do anything different first? Also noticed that my McAfee disck states..."This Cd only installs a trial version of your McAfee programs..
I have an SXPS 1340 running Windows 7 Ultimate. I have tried to connect a Western Digital My Book Home external HD through the esata port but i can't get the computer to recognise it. Has anyone else successfully connected this model HD to the 1340 through esata? To those of you who have successfully connected a different external HD through the esata port what brand and model of external HD are you using?
I want to do a clean Vista install on the above notebook, and if the time comes, restore the setup (OS) to the default config with minimal effort. Read a lot of threads on how to do this, but just need some help/advice on the following.
Currently the HDD partitioned as: 110MB (EISA Config), FAT16 Pri 10GB, RECOVERY (D:), NTFS Pri 136GB, OS (C:), NTFS Pri Act 2.5GB MEDIADIRECT, FAT32
Discs supplied with laptop: Vista Reinstall DVD, Dell Drivers & Utilities, Roxio, Dell MediaDirect
What I want is to do a clean Vista install to the OS (C:) partition (formatting it), but still keep the other partitions in case I have to resell my notebook. My main concern is not being able to restore the factory image back to C .....
My wife's Studio 17 laptop developed an issue today. Sometime between noon and 3pm, the wireless card in her computer stopped working. Everything in hardware diagnostics indicates that everything is functioning...but it will not connect to our home network. I have troubleshot the wireless system...and everything on the router is working normally. When I try to connect to the wireless network, the computer tries to connect, but eventfully just says it cannot connect.
I can not get my PC to "see" other computers on my home network. I have a Dell laptop also and it sees the DV3510NR. The 3510 only see itself. I have checked and rechecked my setting but no joy.
I installed Windows 7 Home premium x64 on my freshly bought laptop HP 350 G1, but there are a lot devices not recognised. OK, I went to this site for drivers, saw windows 7 profesional and tried to install it, but installer is telling me that my OS (W7 HP x64) is not supported.
How and where can I get drivers for this laptop? And one more catch, I don't have ethernet/wireless drivers so I updating them via USB for now.