HP/Compaq :: 8530p Problems (Touch Styk & Vista Power Schemes)
Mar 29, 2009
After I got it back I reinstalled windows (Vista Ultimate 64bit) and after a week it crashed with the blue screen at boot (error 7E). I could not come into windows (not even in safe mode or system restore), so I brought it back to HP.
They did not find any hardware failures with the tests. They EVEN tried installing winXP on some other disk and while everything worked fine they made a conclusion that the laptop is ok. And I was just advised to reinstall OS.
Did that and after 2 days some new troubles appeared.
The "mouse" was clicking randomly (mostly with right button) and the current program (window) stopped being active.
I thought it was a virus (avira did not find anything), so I did another clean install (this time win7 32bit) - same thing. Went back to Vista 64 (with restore dvds made before the troubles began).
I tried disabling mouse, touch pad and touch styk - the mouse works normally when having touch styk disabled.
Now Vista is changing my Power Schemes sometimes (from HP Optimized to High performance and back for a few times).
View 3 Replies
ADVERTISEMENT
Sep 21, 2009
OS is Vista x86 32-bit.
We couldn't for the life of us get the Seagate HDD recognized when plugged inside the eSATA port. Worked fine via the alternative IEEE1394 connector, though. The "super-duper" trick recommended by the manufacturer, consisting of mere rescanning drives with the HDD manager in Computer Management did not effect in anything. Nor did installation of Intel's hard drive manager (which came with a driver update under the veil)
But the dealer whom he bought the HDD from insisted that the HDD worked fine via eSATA, so it doesn't appear to be a hardware problem, nor could a defective cable be the culprit, since he used the very same.
View 3 Replies
View Related
Jan 29, 2009
Very nice machine in every other aspect, except for the noisy fan that I've learned from reading here and elsewhere that HP does not recognize as a problem.
So, I'm thinking of replacing it myself. Can I do that without voiding my warranty? What about having an authorized HP repair center do it for me, if I shell out for the fan myself?
what fan to use? And is there a service manual around?
View 8 Replies
View Related
Dec 13, 2009
who have the HP 8530p with the WSXGA+ (1680x1050) screen I have a question for you! what's it like, more specifically what are the Blacks like, for my needs I need to view my PC with white text on black background. so I NEED the blacks to be good. the issue is there is no were in 300 miles that sells HP business comps so I can't actually see the screen.
screens that I have at home to compare:
Acer 22 16:10, 1680x1050) matte LCD
HP 24 2804h 1920x1200 glossy LCD
Lenovo T500 LED WXGA 1280x800 LCD
Acer Ferrari 5000 1680x1050 LCD
Dell SXPS 16 RGB 1920x1080 LED LCD.
View 10 Replies
View Related
Aug 26, 2009
I've just bought 8530p with a T9400 and ATI mobility Radeon HD 3650.
What temperatures do you get?
My temperatures are:
idle:
Cores: 33-36c
GPU: 44-45c
load:
Cores: 64-66c
GPU:72-80.
Anyone care to comment upon the temperatures above? I think they are a 'tad' high under idling (where speedstep is kicked in).
Can anyone with a 8530p provide me with something to compare against?
I'm thinking that I might do a cleanout and replace the thermal paste to reduce the temperatures, anyone tried that on a 8530p with good results?
View 10 Replies
View Related
Jan 28, 2009
Can anyone post these new wallpapers here (preferably in WSXGA+ or WUXGA)?
View 7 Replies
View Related
Jan 20, 2009
I bought a 6930p earlier and it had the infamous CPU whine and the roaring DVD drive. It also came with Intel/Windows stickers that were stuck on slanted and dust all over the touchpad.
Now I returned it to get the 8530p, and the earlier problems with the build quality were all gone, including the CPU whine. But now I have a new problem, LCD with grainy images.
The LCD is made by AUO with a model tag of AUO197B. I couldn't find any information on this panel but the grainy filter over the LCD is really making me dizzy. Its basically on par with the Dell 2007WFP grainy filter. The AUO is a WSXGA+ which is a 15.4" 1680X1050 resolution. Has anyone else noticed the grain issue of the LCD? Even the 6930p's AUO LCD did not have such a problem.
On further note, PC wizard reports the LCD being manufactured in the 1st week of 2007! It seems like they pulled some of their 8510p LCDs to be used in the 8530p.
View 6 Replies
View Related
Jan 11, 2009
if the 8530p has hybrid graphics, or is it only a ati 3650 without an intel integrated?
View 4 Replies
View Related
Oct 2, 2009
I recently bought the upgrade but this is the first time I am upgrading Windows as I usually do clean installs. Is there anything I should pay attention to? Are the drivers already there for Win7 and are there any known issues?
View 10 Replies
View Related
Mar 7, 2009
After some problems with software, I did a clean install of Vista Ultimate 64bit. I copied the Swsetup folder and used those drivers, downloaded some newer ones and some applications from official HP site.
It works all great, except the two QuickLaunch buttons: for Qmenu and WLAN. Nothing happens if I pressed them. They don't even blink! But the others work just fine - even the Fn keys.
I've tried reinstalling the QLB application and drivers for a dozen times with no change.
View 3 Replies
View Related
Feb 11, 2009
any freeware out there that is power management software installable on an 64 bit version of Vista?
I would like something that works better than the standard Vista OS settings....
View 10 Replies
View Related
Jan 14, 2010
TITLE: HPQFlash for HP Notebook System BIOS (68PSU) - Microsoft Windows-Based
VERSION: F.10
PURPOSE: Routine
SoftPaq NUMBER: sp46785
SUPERSEDES: sp45539
EFFECTIVE DATE: December 08, 2009
CATEGORY: BIOS
SSM SUPPORTED: NO
PRODUCT TYPE(S): Notebooks
HARDWARE PRODUCT MODEL(S): HP EliteBook 2530p Notebook PC
OPERATING SYSTEM(S): FreeDOS
Microsoft Windows 7
Microsoft Windows Vista
Microsoft Windows XP
LANGUAGE(S): Global
FIXES: - Fixes an issue where the computer is unable to boot from some attached USB
devices.............
View 10 Replies
View Related
Nov 12, 2014
where I can get 32 bit Windows Vista drivers for WLAN on the Acer Aspire V 11 Touch? Can dual boot the software but cannot connect to the internet on Vista.
View 8 Replies
View Related
Jan 12, 2009
I received my Dell Studio 1737 only a few hours ago and the immediate problem I've found is that Fn+F10 and the eject soft touch button don't eject a CD whilst in Vista. They work fine in the BIOS or Diagnostics Utility but don't work when the machine boots up into Vista.
BIOS is showing as A04 and the latest available on the Dell Drivers website is A02
View 15 Replies
View Related
Jan 17, 2009
I was just wondering since battery life is lower on an MBP running vista, and the MBP is one big heat sink, is there an alternative to SMCfan for vista that works with the MBP? And what is power management like on vista for he MBP? I think i"m finally going to break and get one
View 6 Replies
View Related
May 24, 2009
Vista's defafault settings for "Power Saver" sets the minimum and maximum processor state as ZERO percent for battery. I don't understand this. If I open performance monitor the processor is shown as 80% max on AC power. If I disconnect the AC power while on "Power Saver" the monitor shows 40% max frequency. Why ZERO percent as default settings, to me that would mean it wouldn't even run.
Certainly for running light stuff it runs a lot cooler, the fan hardly cutting in at all.
View 4 Replies
View Related
May 8, 2010
I want to make it so one finger tap would be left click and two finger tap would be right click. Is this possible. If so, how would I go about doing this.
View 4 Replies
View Related
Feb 13, 2009
i have a dv4, and all of a sudden, the touch sensitive buttons won't respond. what is it called so i can update drivers? hp quicktouch, quickplay..
View 6 Replies
View Related
Aug 14, 2014
I have several HP 8530p and I getting the num lock & cap lock leds blinking 5 times which indicates a general system board error. Bought new boards still getting the same issue. Note all the units will boot to windows fine, but there is a 10-15 sec delay in hard drive response when operating pc. The mouse is real time responsive but once you clink on a item the lag shows up. What to look for as the problem, CPU , Memory changed, Fans, Cooling system. Bios versions have been updated, I've torn the unit down, cleaned and added new thermal paste to CPU, GPU and added copper shims to promote better heat transfer. The system Diagnostics indicates hardware is ok.
View 3 Replies
View Related
May 28, 2010
i just got (what i think is) the first gen envy 15 (4000 series graphics card), and i was wondering how to get the multi touch to work
View 9 Replies
View Related
Sep 13, 2009
I just reformatted my Studio XPS 13 and to my knowledge.
I have installed all the necessary drivers........
View 4 Replies
View Related
Aug 4, 2009
I am talking about the pack that's in between the laptop plug and the sock plug. I'm sitting about a foot away from it and I can hear a little buzzing, plus it is hot to touch (I can touch it for a few seconds though).
View 5 Replies
View Related
Sep 17, 2009
Is it possible to completely disable the Quick touch buttons at the top of the dv5t keyboard?...I already unistalled quick touch driver...but they still work
View 3 Replies
View Related
May 1, 2009
I have this laptop Dv7-1110eg.... Vista Ultimate 64bit
Just buy, the video card did not work ... was a hardware problem ... HP came to seek the ... did little more than 10 days ... HP has returned to me the laptop ... and now everything works perfectly, minus the touch volume controls... the play, stop, and other ... activating and deactivating the wireless network...
If turns the volume on the taskbar touch control changes color ... that works, but fingers (touching it) does not work ...
Deploying the volume bar in the taskbar and click on the volume control Touch ... volume bar is moved a few millimeters, but always returns to the same place
HP has changed my motherboard for the problem of video ... if I remember that before the touch controls worked lead to perfection ...
Just as I returned the touch controls not working ... trying to solve the problem .... I installed Vista Ultimate 64bit and I downloaded all the drivers here [url] I have installed all ... even update the bios ... touch controls do not work
View 3 Replies
View Related
Apr 9, 2010
I think I accidentally turned off the volume bar on my laptop and I'm not sure how to turn it back on. sound does work I have to manually adjust it using the volume icon and all the lights are on. I can't even turn on/off my wireless button.
View 4 Replies
View Related
Jan 6, 2009
how to get there? Also, what would you recommend setting it at?
I have the HDX18t if that makes a difference.
View 6 Replies
View Related
Mar 7, 2009
Its been a while now that i've been looking for a way to get multi touch features or two finger scrolling on my synaptics touchpad...
I have synaptic Touchpad v6.2 and running Windows Vista Enterprise 32bit...
View 6 Replies
View Related
Aug 25, 2009
if there was a way to turn off the touch-strip at the top of the 8510 - or, better yet, an individual "button". The problem is, when I move my laptop around, I sometimes brush one of the touch-sensitive buttons.
At times I've been wondering why my wireless wasn't working and, after trying various things, finally realised I'd accidentally hit the little blue antenna button on the touch-strip...
If I can turn the entire thing off, that would be great.. is there a service or something that monitors it which I can turn off?
View 3 Replies
View Related
Jan 1, 2009
Is disableable even a word?
Anyways, can you disable the touch sensitive controls above the keyboard on this laptop? I have to use the F1-F10 buttons very often in an online game I play, and sometimes accidentally slide a finger over the WiFi touch sensitive button which immediately disables my internet connection so I get disconnected from my game. Very annoying if you have been playing for a while and accidentally touch that thing without being able to get to a save zone.
As for the other buttons besides the WiFi one, if I accidentally touch those, my game gets minimized and I have to wait for the HP Info Center window to load up before I can get back into my game, which by that time my character is already dead.
I looked around sites found with google and couldn't find anything. I never use the touch sensitive buttons besides the volume one (which is rarely used too and could do without if getting rid of the WiFi touch sensitive button means getting rid of all the touch sensitive buttons).
View 8 Replies
View Related
Feb 28, 2009
can i disable the quick touch button that turn on the pc ?
View 3 Replies
View Related
