HP Compaq CQ50-NR215 Networking :: Bad Recovery - Laptop Failed To Boot (Error 1005)
Jan 5, 2015
This Compaq CQ50-NR215 has continued to get slower over time. It was bought at BestBuy, and came with (2) "GeekSquad" recovery CD's- as opposed to a Microsoft OS disk? Upon backing up my data, I proceded with Disk1- which it said successfully did something with the partition. Stage two was installing original software. It stalled during this stage & gave ERROR 1005. After removing the CD, the laptop failed to boot, stating that some device in the boot sector was not present.
Â
It so happened that I had a Vista OS CD from some other computer, so I inserted the CD & tried reboot. After asking whether to repair/install windows (which I selected install), it appeared to going well. The greeting message appears & says "Prepearing your DESKTOP for initial use". It booted fine, the UI appears intact. The problem-
Â
The WLAN light on the laptop which is red when turned off/blue when on- remains red & will not activate. In the device manager I find no network adapter. A section named "Other Devices" is highlighted in yellow indicating an issue- when selecting Other Devices, a submenu appears & the following list is present (see photo also)
Coprocessor
Ethernet Controller
SM Bus Controller
Unknown Device.
From the HP driver download section, I downloaded what I thought may be the appropriate chipset to a flash drive, then moved to the laptop & installed. Still nothing.
Â
It was suggested that I may be able to plug an ethernet cable directly from my router to the laptop & gain internet access that way- which failed, no access. The CD I installed from was designed for an older desktop, not having the software to make use of the internal wifi.
I tried to turn on my laptop today and during the computer booting up received a windows Error Recovery Screen . It said windows failed to start . a recent hardware or software change might be the cause and gives me two options. If i choose Launch start up repair i get a blank screen for hours and nothing happens . If i try to start windows normally nothing happens . I just used the computer the other day and it was working fine i didn't add any new hardware or software so i'm not sure whats going on . I am running The Dell Diagnostics using the F12 Diagnostics Testing Now
i own a compaq cq50 laptop, i was woundering if i would call hp up and ask if i could order a new keyboard for my laptop and they would install it fo me, i dont want a different one, i would just want a new one, would this be possible?
How to open my HP mini 110. When I always try to open, it says ENTER CURRENT PASSWORD. After 3 tries, it says Fatal Error ... System Failed . What to do?
I recently had an issue with my HP ENVY TS 15 and from using the support chat in the HP Support Assisant I was advised to do a system recovery. Â This has failed and I am now stuck in a loop!
I have Dell XPS 2013 laptop purchased in June 2013 with Windows 7 professional OS install in it. Suddenly the laptop stopped working giving an error message with complete black screen:
error: no such partition. grub rescue >
When I took it to the service center they told me the hard drive of the system might have failed leading to such error. I am still unsure is it due to hard disk failure? On the top of that I have many important working files stored in the system for which I could not able to take back up. Is there any way I can retrieve my files? If I need to purchase a new hard drive which specifications I need to order. Unfortunately the system had only 1-year warranty period...
My Compaq Presario CQ61-110SA kept on crashing wiht the blue screen error so yesterday i had some time on my hands so i thought I would do a full system recovery in order to stop this nuisence from happening, however I wish I had read the problems associated with the HP recovery manager first as now I have no OS and a recovery manager that dosn't work.
At the moment I am using the recovry manger pre installed on the hard drive however it gets to installing the drivers, and after about an hour a pop up comes up for about half a second saying a about a driver install or dont install (it looks similair to th etype of pop up on vista when a new program wants to run) however due to it poping up so quickly and then going I cannot see what the actual driver is let alone choose an option, after this it says recovery has failed the error code c:system.savlogsBurnBootwarn.log it states the error was detected during PINIST_BBV , when i opened the log file it seemed all the drivers had succeded but [mini_FBI] resilt failed, I have tried doing the recovery with the wireless button on as I heard this could be the cause but still it didn't work, I have recovery discs that i burned however My laptop wont seem to boot fom disk even though I have changed the BIOS and put harddrive at the bottom and the disc at the top.
I'm not able to install Intel Management Engine Interface (MEI) Driver. During Installation a message pops up saying, "The setup failed to install one or more drivers." I downloaded the latest version of the above software but still didn't work. I'm using Windows 7 Ultimate 64bit.
When i'm turn on my HP envy 4-1257er after the sudden shutdown on the screen displays the HP logo that says "please wait". After a few seconds appears the "blue screen with a sad smiley" and further reads:
"Recovery. Your PC needs to be repaired. The boot configuration data file is missing some required information. File: BCD. Error code: 00xc0000034. You need to use the recovery tools on your installation media. Is your don't have any installation media (like a disc or USB device), contact your system administrator or PC manufacturer. Press ESC for UEFI firmware settings. "
After pressing the ESC button opens a Startup Menu with a choose an actions like: f1 - system information (worked), f2 - system diagnostic (worked), f9 - boot device options (doesn't work) , f10 - BIOS setup (doesn't work), f11 - system recovery (doesn't work). When I click on these buttons (f9, f10, f11) again loaded a blue screen with an error. On the usb-drives with images does not respond in any way.
HP Pavilion dv9830us Notebook. A few years ago this laptop got jostled while configuring updates. Ultimately, had to use recovery to get it up and running and it's never been fully right since. One thing I've noticed is that I now have an additional start button stacked on top on the original. Is this because I did a recovery?
i have hp pavilion g6 notebook pc laptop...but it does not contain recovery disk and whenever i create recovery disk from recoverry manager it failed to verify disk 1 and show the message "insert another disk " it happen again and again ...what to do....
my laptop runs extraordinarily hot (I believe it was a faulty fan/heatsink assembly.) So I purchased a replacement, opened up the laptop and replaced it.
Now I get underload temps Up to 94C on GPU (and around 80 on CPU -
i purchased a compaq presario cq50 model, and i already upgraded my ram to 3gb, and the hp site says i should be able to upgrade to 4gb. also i have a hdmi port blocked up, so can i add a hdmi port? what can i do to upgrade it more?
because i plan to have this laptop for 3-5 years but i also plan on buying a desktop replacement laptop this summer.
I have a HP ENVY 17-j053ea which I had to purchase recovery discs for. I used the recovery discs several times following different instructions and using different BIOS settings, and have been in 3 different chats with HP but I am still getting an error message. In the final chat HP told me that I should take the laptop back to the retailer who should repair/replace it for me and if they don't then to contact HP over chat again. Â The error message is a dialog box with a black background titled 'Recovery Manager' and the message says 'The recovery attempt has failed. Select one of the following buttons:' where the buttons are 'Save Log', 'Details' and 'Retry'. If I click on 'Retry' it prompts me to insert disc 1 again, (at the stage of recieving this error message both discs have already been used) and if I click on 'Details' a file named 'CTOERROR.flg' opens in Notepad and contains the following text:
ChkErrBB.CMD : Detect some error during PININST_BBV.ChkErrBB.CMD : Check c:system.savlogsBurnBootWarn.logChkErrBB.CMD : or, check c:system.savlogsBurnBootMerge.log
I have a new Compaq CQ58-353EM laptop. It came with preinstalled system (Windows 8). Afterwards I installed Windows and HP updates. Â The problem I have is with the Realtek PCIe FE Family Controller (ethernet). In the device manager it is shown with a yellow triangle with an exclamation mark. In the device state it is stated:Â Your computer's system firmware does not include enough information to properly configure and use this device. To use this device, contact your computer manufacturer to obtain a firmware or BIOS update. (Code 35). Â Laptop has all system and hp updates installed. Â I tried the following to resolve the problem: - 2 different bios versions (F.26 and F.25). - several add/remove/reinstall of the Realtek drivers - 2 different versions of Realtek drivers:Â 8.3.730.2012 and 8.20.815.2013 (from Realtek site). Â Ethernet is working OK under Ubuntu.
I have a Compaq Presario CQ61-313us notebook, and i've just installed windows 8.1, then i realized there was a problem with my Internet, every time i open a website, i always get either a page like this: [URL] ... , or i get "Error: Gateway Timeout", though i can get to the website if i refresh a few times, but it's extremely slow.
Also, i can't download anything, I've been trying to download the .NET Framework 3.5 through Windows Features and windows Update, but in vain. I think that proves that the problem isn't from IE. I also think that it's the wireless driver's fault, but i'm not sure, and i don't know what driver to download. I tried updating it from the properties meny, but it says it's up to date. My wireless adaptor is Qualcomm Atheros AR9285 802.11b|g|n, V3.0.1.155.
Update: I think it's worth noting that when i download with utorrent, it downloads normally with my regular download speed, but other than that, i can't download anything.
I'm kinda worried about it's temperatures. Just surfing internet, I get 75-88ºC (or even 91ºC) on the CPU, and 55ºC on the harddrive. Is that normal? If I run a game, the temperature goes even higher. For example, I was at 77ºC and I opened a video in youtube and it went to 81ºC! Right now I'm just talking on Skype and I have 85ºC.
The computer is not on my lap, it is on a table, so i am not blocking any of the air vents, and the room temperature is not high at all.
when i charge my battery not only does my fan speed up, heat up, and so does my charger, the brick heats up or w.e it feals like it could set something on fire if left for a long time, should i worry? or is this normal in all laptops? (this is for the charger)
My Ideapoad P500 is approximately 16 months old (so the warranty period is out, obviously!) A couple of nights after a reboot I got the message "Repairing Hard Disk errors. This could take an hour or longer."... or something very similar. The laptop hung up at that message for more than 18 hours. Â I did a hard reboot and now get the message "Checking media" followed by the error "Boot failed." This leads to the message, "Default Boot Device Missing or Boot Failed."No I don't have any recovery media.Yes I have pretty recent backups so that is not a problem.I've got an enclosure that I can use to hook my laptop hard drive up to so I can see if the drive is even readable. Â Now here is the 64 thousand dollar question... how do I get the hard drive out of the laptop? I have taken the five screws out of the back. At that point, I think the DVD drive should slide out, but it does not.how to get the hard drive out?
I have a y500 Lenovo gaming laptop with Windows 8, and for the past couple of days, each time my laptop is put in hibernation or powered down, whenever I turn it back on it gives me this message:
"Default Boot Device Missing or boot failed Insert recovery media and hit any key Then select boot manager to choose a new boot device to boot or recovery media."
Then it brings me to a page with 3 boot options, and only the Windows Boot Manager works. I'm doing scans and hardware scans but so far nothing is being found. This laptop is less than 2 months old so I really don't think it's a hardware problem, and I haven't downloaded anything recently that may have messed this up. I would contact Lenovo but I'm unsure if this is an issue with the laptop, or Windows 8.
I have a Acer E1 522-3657 computer, which my son set-up for me but did not make the recovery disc(s). The unit is just outside of the warranty period when the hard drive failed. The hard drive just makes a clicking noise and after the logo screen appears it goes to a blue screen with a box that has the following message with in, "Default Boot Device Missing or Boot Failed. Insert recovery Media and Hit any key.....Then Select 'Boot Manager' to choose a new Boot Device or to Boot Recovery Media. Â I have installed a brand-new Western Digital 1T Sata3 harddrive to replace the Toshia 750 GB original Drive. After turning the computer on and at the logo screen I press and hold F2, this takes me to the InsydeH20 Setup Utility Screen. I see under the "Information" menu that the installed harddrive model and serial number appear. I see in the "Boot" menu, Boot Mode: "UEFI" and Secure Boot: "Enabled". Â Under the "Exit" menu, Exit Saving Changes is highlighted. When I press F10 a "setup Configuration" box appears asking to save configuration changes and exit now? "Yes" is highlighted to which I hit Enter and are returned to the "Default Boot Device.......page. I then hit ecs twice and are at a black screen with the message No bootable device -- Please Restart system_appearing in the upper left corner of the screen. I then push and hold the power button until the computer shuts off. Â I have ordered from acer the "Acer E-recovery Media Disc Set", which is specific to the SNID of my computer. I have not attempted to format the new hard drive in any way. Â I assume the E-recovery Media Disc Set will handle that operation due to the multiple partitions required. Â In view of the above situation, do I need to set up the computer in any way before I start to utilize the E-recovery Media Disc set. I assume the Media will be on CD's. The computer was running Win 8.0 which was updated to Win 8.1 and was running very well, very stable.
Acer V5, spilled coffee on keyboard. no problem at first, then lockup, and on restart get the No Boot Device or Boot Failed. Am using my old laptop now. Can I get a download, save it to thumb drive, and use it to restart/reboot my Acer?
On my HP Pavilion the Recovery disk creator kicks out disk 1 (it says it will make 3) with an error note. If I stick another disk in it starts all over.My DVD+R disk is a 4.7 GB. Could it be only one disk was needed?
