HP/Compaq :: Installing Vista After Dead HD
Aug 7, 2009
I have an HP dv5t which I purchased new last October. A couple of weeks ago, my HD got fried (think it overheated). HP sent me a new HD, and I had a technician install it for me. I never made recovery disks as instructed by HP (was gonna get around to it; who knew the HD would die in 9 mos?). The tech ended up installing Vista Ultimate Lite instead, which I thought was okay b/c there's no bloatware that way. However, I miss a lot of the elements of the Aero environment, particularly Windows DVD Maker.
I have two questions:
1. Can I get backup CDs from HP to reinstall Vista Home Premium (which is what my lappie was shipped with)? Would doing so reinstall the bloatware?
2. Is there a way to tweak Vista Ultimate Lite so I can have the standard GUI w/o putting bloatware back in my system? The environment in Ultimate Lite reminds me too much of XP (clunky-looking windows, fonts are too large, etc).
View 3 Replies
ADVERTISEMENT
Jan 6, 2009
I just got one of these the other day and in order to remove all the bloatware, update to SP1 and more, I went and installed a clean Vista, even backing and rhacked by pcaestoring the activation (as the thread about using ABR says).
After this, I download every single driver from the HP support page and went through installing them (of couse, the latest version of each and even other bloatware such as help files, wireless assistant, etc.). The thing is that, after everything was installed, I was still having a "yellow unknow device" in the device manager. After much thinking, I guessed that what was missing were the QuickLaunch buttons, because none of the QuickPlay buttons in the keyboard work, neither the "eject" button for the optical drive. But that QuickLaunch wasn't listed in HP drivers. All there was is a Quick Launch Security Update, but not the actual drivers!
After much searching without hope, I tried one last thing: to let windows install those drivers by searching in Windows Update. Amazingly it worked and they were installed as, efectively, the Quick Launch Buttons! But the problem is that those still don't work! The volume mute, slider, treble and bass work (but make no sound when touched, even though they are activated in the Control Panel - Quick Touch), but the QuickPlay, DVD, TV and Eject still don't work!
Also note that before even trying to use Windows Update, I went and installed every single driver (again, not drivers that were outdated to the ones in HP support and I already installed) in the SwSetup folder: still no luck. For what I read in a thread, there should be (?) a QLB folder that would have the Quick Launch Buttons? Well... I didn't had it...................
View 7 Replies
View Related
Jan 13, 2009
I have brought a new dell studio 1435 laptop and they provided me with default windows vista home premiun OS.
I have installed windows XP professional OS after changing the BIOS settings for onboard devices (In BIOS:
Onboard Devices -> Flash Cache Module -> Set Off
Onboard Devices -> SATA Operation -> Set ATA)
Can i will be able to install the windows vista OS after installing windows Xp with the same BIOS settings for onboard devices (In BIOS:
Onboard Devices -> Flash Cache Module -> Set Off
Onboard Devices -> SATA Operation -> Set ATA)
View 4 Replies
View Related
Nov 19, 2008
I have an ACER Aspire 5670. Recently i installed windows vista business.
From the day i installed vista my battery appears to be broken.
Ok let's say battery cells were destroyed (Fedora installed on the same system report that battery may be dammaged)-So it may be destroyed in a couple of hours.
The second weird thing is that it persists not to recognize one device. In the device manager it has a hardware ID: ACPISMCB000
Third weird story. Today my notebook prompted that there was SP1 update available. I installed it (in 3 phases - 2together at shutdown and 1 after restart)
After SP update my keyboard stopped working - same thing with touchpad. I uninstalled SP1, uninstalled synaptics driver and re-installed it - same thing.
In a forum somewhere i read that battery causes these problems. I took battery off and now i am writing this message from my notebook's keybord ... touchpad still dead...
both keyboard and touchpad work perfectly in Fedora 9 and that usb mouse/keyboard work perfect too in Vista.
View 4 Replies
View Related
Apr 30, 2008
What do i need to be aware of? I heard some drivers I need first? ARe there any driver issues with the 64bit? I have 8700m sli and just a dvdrw.
View 10 Replies
View Related
Oct 18, 2008
I have a Studio 17 with Vista Home Premium preinstalled. Im trying to install Vista Ultimate 64 bit, and when I boot from the DVD, it says Loading files, than at the end of that it shows me to screen with the Microsoft bar like its going to load windows, but then I immediately get a blue screen with the error irql not equal to or something like that.
I tried disable the flash cache in the BIOS but it still gets the blue screen as soon as it trys to enter the setup screen.
My BIOS is set to ACHI and I have not changed that.
I wanted to try out the 64 bit Vista and still have my 32 bit on it in case I run into some apps that wont run in 64 bit.
anyone have any idea what I need to do? I have a seperate logical partition that I made for the Vista 64 bit. So I have 2 partitions, a C: partition which has the Vista Home on it that came with this laptop and I was hoping to install the 64 bit onto the D: partition but Im getting the blue screen.
Do I need to do anything with the ACHI setting? I have 4 gigs of ram and would like to use it.
View 10 Replies
View Related
Jul 1, 2009
I'm a computer programmer and im having problems installing vista on a sony vaio. (to install XP i have to slipstream drivers into the isntallion which takes too long to do)
so i want to reinstall vista at this point for now my last install of vista somehow got screwed up oneday i booted up and it was missing windows files so i formatted it burned a vista install cd everything boots fine the install screen come up ....
View 4 Replies
View Related
Feb 13, 2009
Been nosing around the forum to try to find the answer before asking, but i really couldn't find any, so here goes!
I just got a new 7200rpm 320gb from WD to replace my old drive . I replaced it, boot the laptop (VGN-CR31S) as usual,
and put the first recovery DVD in the tray. Unfortunately, when it gets to the options menu,
I can't get it to install, it keeps asking for the right volume or cd/dvd. I thought the recovery dvds would be able to install everything from scratch ..
View 3 Replies
View Related
Oct 19, 2008
My acer 5100 came with vista and I'm trying to do a fresh install of XP SP2 on it.
After I get past the partitioning part in the install process, it goes on to the "installing windows" stage and shuts off midway. This has been happening a few times and after some googling, reckoned it has to do with the SATA hard drive.
I tried to get on Bios and change the SATA to IDE but I didnt find any modifiable property for the hard drive on BIOS
I'm wondering some of you folks who installed XP on a vista laptop got it done.
View 7 Replies
View Related
Apr 17, 2009
Just received my new CTO Z-690 today with vista home premium (64 bit), and to save a little on cost, bought an OEM Vista Ult 64bit separately.
Now I'd like to install vista ultimate instead and i just want to make sure i have the steps right.
1. backup/create recovery disks just in case something messes up.
2. install vista ultimate, wiping out everything
3. install drivers from sony's website
lastly, 2 questions
1) since my current drivers are for vista home premium, i will have to download new ones regardless right?
2) is there anything else that i should be doing?
View 6 Replies
View Related
Apr 7, 2010
I have an Upgrade dvd Vista business to Win 7 that I received for my z790. Finally got around to install Win 7 and seems like I will need to install Vista first to be able to use the upgrade DVD. Any workaround?
My secondary objective is to install new SSD.The way I see it now:
1. Ghost XP on SSD
2. Install Vista on SSD
3. Install Win 7 on SSD
Is there an easier way to do it? Any more pitfalls to avaoid? Thanks!
the only Win 7 key that I have is the upgrade Vista to Win 7. Am I correct that retail/all versions install Win 7 disk will not let me use this key?
View 4 Replies
View Related
Jan 2, 2009
I am installing the oem version of vista home premium 64 bit on my brand new macbook pro. I use bootcamp assistant to create a 60gig partition, insert my vista cd to start the install, use advanced options to let vista convert format to ntfs.
I followed the steps/guide exactly and everything goes fine. The system goes through installation but when does its first reboot and comes back to the install screen it errors on the step that says completing installation. It remains on the completing installation step for a few minutes and then an error comes up the says "Windows cannot configure one or more system components. To install windows restart the computer and restart the installation."
View 10 Replies
View Related
Jul 27, 2007
After uninstalling the MS Coporation - WDDM stock driver, I tried to install other better drivers, but none of them could be installed.
"The NVIDIA setup program could not locate any drivers that are compatible with your current hardware."
I keep getting this message.
View 13 Replies
View Related
Mar 23, 2009
i have recently formatted my hard drive and installed cean copy of Vista Ultilate on my DELL Inspiron 1525 machine. I did not use dell recovery partion to install, instead i use Vista Disk.
I was able to install all the drivers except bluetooth. Whenever i try to to install bluetooth drivers i get following error " The installer be run on windows vista only"..
i was with dell tech support for couple of hours but they were not able to solve my problem. The bluetooth is enabled in BIOS, switch is on etc.
View 5 Replies
View Related
Sep 1, 2009
My girlfriend wants to install Windows 7 over Vista on her laptop. Is there anything that would prevent her formatting the HDD and installing Win 7? Something in the BIOS
View 4 Replies
View Related
Aug 1, 2009
I purchased a ready-to-go VGN-Z720D from Sony, and their bloatware is, well, horrible, so i figured that would be as good a time as any to do a clean install AND run Windows 7 RC1.
Problem is, most of the utilities/programs listed earlier in the "Windows 7 on Vaio Z" thread are not available from esupport.sony.com in 32-bit flavor for this particular model.
I've tried to use 32-bit drivers from the Z690 on my Z720, but Sony does enforce model restrictions within its package
View 8 Replies
View Related
Mar 24, 2009
i have a new laptop i brought about 2 months ago called "Acer Aspire 7530". It has 4 gig ram, and a 2.1 GHz processor.
I want to install Vista 64 bit on it, as the original comes with a 32 bit version which I do not want.
Anyways, when i boot from my vista CD it goes into the installation menu. But after i choose the language, it says "No device drivers were found. Make sure that the installation media contain the correct drivers, and then click ok"
I got all my laptop drivers and put them onto a USB stick and tried that, but it did not work.
View 4 Replies
View Related
Feb 8, 2009
I had got a VAIO NS15G a few days back with Vista Home Premium pre-installed.
I have just upgraded to Vista Ultimate. But after installing the FN Keys for volume and Brightness are not working.
After installing some software from VAIO website, it was under support downloads, dont remember the name, the Volume key is working perfectly (fn+F3 and F4)
But brightness is not working. It shows the brightness metre on pressing the keys but doesnt change or adjut the brightness.
View 9 Replies
View Related
Jan 7, 2009
I have a new unibody Macbook Pro 15 inch and after playing with it for a month and having XP in parallel only, I decided to install Vista Ultimate through boot camp so that I'll be able to play games on my macbook. Now here's the problem...
After I load up the boot camp assistant and I proceed to install Windows, the laptop restarts and goes to the Vista installation screen. I set up the region codes and language that I prefer and I hit next. Now, I finally hit the big "Install Now" button in the middle. After clicking on this button though, I hit my error:
Required cd/dvd drive device driver is missing.
My dvd drive is the Matsua DVD-R UJ-868
My IDE controller is the 82801BA Ultra ATA Storage Controller 244B
Also, no, I do not have an external DVD drive and so loading up another CD with the drivers is out of the question.
View 10 Replies
View Related
Dec 27, 2007
I have acer 5570-4011 laptop with vista home (and ubuntu on a separate partition). I rebooted from cd, using winxp pe, deleted all files on vista partition, except those in the root, and started to install win xp pro. After installation files were copied to the hard drive, I restarted without cd and when setup continued, it gave me "file ntkrnlmp.exe could not be loaded. Error code is 7".
On MS support site they say about ACPI or memory problems and suggest to press F7 during that step to skip ACPI check, but it doesnt help in my case.
How can I install WinXP ?
View 4 Replies
View Related
Oct 12, 2014
Have Extensa 4420. Been unable to restore old Vista OS so decided to move up to Win 7 32 bit. Started the install from DVD but got error message that I could not install on the system partition as it was "reserved" by Acer. This is half of the HDD.
View 3 Replies
View Related
Nov 6, 2009
This took me a long time to find out... Read my post here to save yourself the time and just "make it work"!
[url]
View 3 Replies
View Related
Mar 29, 2008
I am at my wits end with my e1705. I had a sudden meltdown about 2 weeks ago... screen went scrambled, BSOD,etc...
Performed diagnostic, memory on video card came back as bad. Replaced with new card (from Dell), reinstalled OS, completely reinstalled nVidea drivers from Dell (Used driver cleaner too)...
Everything went smooth for a couple hours after this was completed yesterday (full diagnostic showed no errors), but after booting up today, after about 5 or 10 minutes of use screen freezes and turns either solid cyan or black... a small pattern of thin lines appears also.
View 9 Replies
View Related
May 15, 2009
Yesterday updated the BIOS to F.09 today the system will not boot, i get no BIOS screen, the screen just light up so i know it has power but just sits there and does nothing, no HDD access or anything.
This is now the second DV2 that i have had, looks like it might have to go back again. might swap to a DV3 this time, anyone else had issues with the DV2
View 5 Replies
View Related
Mar 9, 2009
I have a Hp compaq nx 9020 notebook. from the last week she is dead. The processor and ram,hdd are ok. The charching light and other lights are dead and the motherboard did not start up. Have any one a idee what can i do. I need a motherboard schematic because i have opened up the notebook and did not find any blowing pieces. I have downloaded the service manual for this model and the schematics are not in there.
View 3 Replies
View Related
Mar 10, 2009
i tried to boot my dv2500, it boots with no signal on screen the screen is lighted but no signal from the computer...
View 10 Replies
View Related
Mar 25, 2009
The 500GB HD in my DV7t just died. It's definitely dead, as I pulled it out and tested it in a caddy. When the computer goes to initialize the drive, it gets an error in the I/O device. I still believe I'm under my one year warranty from HP. Does it cover dead harddrives? And if so, do they require that I send in the dead drive? I work for a small business, though my boss has a rather strict data policy - all broken, dead, unused or outdated drives are to be turned into them for proper destruction prior to sale, refurbishment or replacement. Even when we send our laptops off for repairs, there are 'stock' harddrives we place in them that have never had sensitive company data on them. A bit paranoid, definitely, but it's company policy.
View 5 Replies
View Related
Nov 12, 2009
A friend of my g/f gave me her computer to fix. She said she took it to Best Buy and they said her HD is messed up. Now, if I order a new drive and the restore disks from HP, will that fix this issue? She is not worred about losing any data. Is my thinking correct? Install new HD, put in restore disks, start it up and follow the directions.
View 9 Replies
View Related
Mar 15, 2010
I purchased this dv5t laptop back in June 2008, and it has always been reliable. I just came back home from work & now I can't even turn the darn thing on. If I hold the power on button nothing happens. The Ac adapter is still working & I've tried taking out the battery, but that didn't help.
View 7 Replies
View Related
May 29, 2009
I know this is an old laptop but my wife wants to keep it. Problem is the NIC is dead. Its a mini pci card and I am not sure where to find one to replace it or if it can be upgraded from a G card.
View 4 Replies
View Related
