HP/Compaq :: Power Cable ForC500
Mar 15, 2009i'm having trouble finding a power cable for HP Presario C500 notebook?
can i safely use the universal notebook adaptor?
I need 19.0V - 3.2A
what if I use say, 2.7A?
ADVERTISEMENT
HP Pavilion G6-2148TX :: Laptop Will Only Power On With Power Cable Disconnected At Motherboard After Fan Replacement
Oct 21, 2014After replacing the fan, I have a power up issue with the laptop. Basically, the laptop will only power on with the power cable disconnected at the motherboard. It was by mistake that after the fan was replaced and everything was put back together, that I noticed that the battery was not charging.
I then reopened the machine and reconnected the power cable to the motherboard and nothing - no power.
When plugging in the power source with the battery in place, the LED adjacent to the power socket lights up WHITE then stays ORANGE and will not power up. No other lights, no fan noise, nothing.
If I remove the battery, the LED adjacent to the power socket lights up WHITE and stays white however will not power up either. Same agin, no other LEDs, not fan noise, nothing.
I have now opened the machine back up and disconnected the power from the motherboard. Put it all back together and the laptop powers up as normal with the battery and it works fine. (Well until the battery runs out anyway).
Acer :: 5920g Power Jack With Cable
Aug 17, 2009I have a 5920g about a year and a half old with a DC jack that is almost ka-put.
where I could purchase one of the DC jack cables that come in the 5920?
Acer Aspire 5733z :: No Power After Using USB To Sata Cable
Jan 18, 2015I got one of those usb to sata/ide cables to read an external sata drive on my acer. I followed the instructions for connecting a 2.5" sata drive. When I plugged the usb in there was a pop and now my laptop won't start and no lights are on. I've taken the hdd out and it works and is ok...
View 2 Replies View RelatedDell Inspiron N7010 :: Keep Pushing Power Button With No Cable
Mar 16, 2013I was in a game play it then suddenly shut down , when i try to start it up the light from battery flash it up for 1 sec then stop no noise no nothing dont want to start i try remove battery only with cable the light from cable is on i try removing static electricity keep pushing the power button with no cable and battery for 3 minute nothing.
View 1 Replies View RelatedLenovo P/Y/Z Series :: IdeaPad Z500 Won't Boot Up Without Power Cable Plugged In
Jan 9, 2014My z500 cannot boot up without power cable plugged in. Usually,a few seconds after I saw the lenovo logo,the system will suddenly shut down just like the battery was removed.however,if I connect powercable to the laptop and power on,everything is fine,I can enter windows 8,or ubuntu,after I enter OS,I can disconnect the power cable without any problems.the battery is healthy and can last for more than 2 hours.
So far I tried the following methods:
1.update BIOS
2.update battery firmware
3.reset BIOS
none of them worked for me....
Dell Inspiron 5521 :: Laptop Stops Charging When Remove Power Cable And Again Plug It
Jan 14, 2015I bought this inspiron 15r 5521. Its approx 2 year old. There was warning in battery status in the PC checkup. Few days afterwards the laptop did not start up. I searched and did a hard reset..BUT when i shut it down or hibernate . again its like dead and i have to plug in the power cord for 20 min and do a hard reset to turn it on . It also happens that if i shut down while the power cord is plugged and i take it out and again plug it , it stops charging..(again need a hard reset).
View 1 Replies View RelatedHP/Compaq :: E-SATA Cable For DV7
Nov 9, 2009I have a 3.5" enclosure for HDD that have an horizontal "L" e-SATA interface but i don't know what kind of e-SATA have DV7 that i ordered. Can someone tell me what kind of e-SATA cable should i buy?
View 3 Replies View RelatedHP/Compaq :: Ribbon Cable Damaged- Dv9000
Jan 28, 2010I have a dv9000 series and the the ribbon cable that goes from the power button to it's respective conector on the motherboard is a bit damaged one of the metal contacts at one end has "skinned" off.
What would you do, look for a replacement online, i doubt a shop would stoc such a thing, of do these cables tend to be standard, the model number of the cable is E118077.
Also you should be able to completely remove a motherboard, including detaching it from the screen and still power the fan on, obvioulsy with the battery connected?
It's this cable, [url]
could you somewow slice the end off and then cut a small section so you have some new contacts showing?
HP/Compaq :: HDMI Cable Crashes Computer
Apr 21, 2009I have a dv6500t computer. I recently bought a 23" lcd monitor (HP w2338h) to go with it. I was using the vga cable that came with it, which works perfectly fine. I then bought a link depot hdmi cable to use to connect my monitor. The cable works fine, but when I restart my computer (with the hdmi cable still plugged in) my computer brings up the blue screen that says my computer was shut down to prevent further damage. But when I take the hdmi cable out, this screen doesn't pop up and shut my computer off. Why does the hdmi cable do this?
View 5 Replies View RelatedHP/Compaq :: DV9000 Display Cable Ruptured
Jan 12, 2010I own a Pavilion DV9700 notebook and I noticed that as I was opening my display, the image would disappear. Upon gutting half of my laptop, I noticed that a display cable was ruptured (stuck under a hinge). I took a picture and pointed out the ruptured cable (see below).
following question:
1. What part do I need to order?
2. Are there DIY instructions out there?
HP/Compaq :: Touchpad Is Smooth, But Mouse Is Jerky? -> NIC Cable
Jul 17, 2009I recently got a basic Logitech USB mouse (model UAE-96). I plugged it into my Thinkpad T60 laptop, and the mouse pointer was kind of jerky when I moved it around. But the mouse pointer moved very smoothly when I used the touchpad.
I thought the mouse might be defective, so I plugged it into my HP laptop, and the mouse pointer moved very smoothly, so it wasn't defective. Both laptops are running Windows XP Pro SP3, and are using the exact same driver version.
Then I tried downloading the latest software from Logitech, but that didn't help with my Thinkpad, the mouse pointer was still jerky.
So I thought I might try a different brand mouse. I got a Microsoft mouse, and it is also kind of jerky when I move it around on my Thinkpad.
when I use a real mouse, but it is smooth when I use the touchpad?
HP/Compaq :: HP 9700t Mysterious Cable Broadband Fail
Jun 23, 2009In the last couple of months I've had my cable broadband service go down for a couple of hours to a day or two, then come back up. I thought it was my provider, but then it got progressively worse with almost all pages needing to be reloaded when I surf the web, and then last week my computer will either not recognize ANYTHING on the other end of my ethernet wire, or tells me I have an unidentified network with no connectivity. Since my boyfriend's laptop is working ok with our cable internet, I have to assume it is my computer causing the issue.
Right now I am using dial-up service. No problems getting on, but I am still having to reload pages to connect, no matter whether I am using IE or Firefox or Chrome. The problem is temporarily corrected when I disconnect then reconnect, or reboot the computer, but then it comes back. Also the same for public wi-fi use.
Does it sound like I need a new ethernet/modem card, or could it be an issue with settings or something else? (just to rule out possibilities, yes I have tried different cables, rebooting computer, turning off & unplugging modem and computer and turning back on again, many times, it does no good)
I don't think this problem is directly related, but since the Vista Service Pack 1 came out a few months ago, my laptop won't actually correctly install it, it goes into a reboot loop stuck at 99%. I finally just had to wipe the drive, reinstall Vista again (clean, of course) and not even attempt to update with SP1. My current plan is just to try out Windows 7 when it comes out, and hope that goes better. Are the HP 9700 laptops going to be able to upgrade ok? Anyone been testing the betas?
HP/Compaq :: DV7TAll Come With Tv Tuner- Work With Regular Cable
Feb 21, 2009I didn't have an option of choosing a tv tunner with my Dv7T when I ordered it. I saw some pictures of a built in remote controller. Do they all have this?
I do not have HDTV right now, but I do have cable. If it comes with a tv tuner is there a way to hook it up so I can watch tv in a window on my computer?
HP/Compaq :: DVD Drive Connected To Laptop With Sata To Esata Cable, Drive Is Not Recognized By Windows 7
Feb 22, 2010I connected a dvd drive to my laptop using, a sata to esata cable. my laptop has a ESATA port.
I don't know if you should post some kind of config summary (if yes let me know, I will do it promptly) basically I have a HP DV6t quad edition with an Intel 5 serie chipset,
PM55 express chipset (dont really know if it make any sense but still, I will just say state it) so I installed Intel Matrix Storage and when I connect the drive I can see it, but windows 7 does not see it, it's like I didn't plug anything in. [url] also my bios is almost configurable, I don't know why I can change the time, the date, the admin password, the boot order, virtualization, fan on/off that's pretty much it. so what options do I have if I want to make this dvd drive work?
Dell :: D420 ZIF Won't Hold HDD Cable
Oct 29, 2009I'm upgrading my Toshiba MK3008GAL hdd to a MK8025GAL. The Toshiba HJ178 Flex Cable will not clamp tight in the new drive and now won't clamp tight back in the old drive either. The laptop does not see the new drive OR the old drive if I put it back in.
The ZIF connectors seem to work in that they flip up (open) and down (closed) as they're supposed to. In the old drive the cable was tight when I first removed it.
I've tried taping the cables down in both drives, and inserting paper in with the top of the cable to make a snug fit. Still neither drive is recognized.
I've ordered a replacement cable (used) in case I've mangled the old one, but still the old one should fit tight.
Sony :: Just Cant Get The Keyboard Cable To Stay In
Feb 15, 2010how to fit my new keyboard, its a Vaio VGN-AR11m and its the same as the old one i took out, i push the cable in and try and push the little plastic clamp down but it just wont stay in,
View 9 Replies View RelatedSony :: Z Raid Cable And Bracket
Aug 27, 2009Im looking to buy the raid cable and bracket for my Z. I've seen old threads and saw that the raid cable is FCP-126, but does anyone know the model number for the bracket?
View 3 Replies View RelatedSony :: VAIO Z: Can't Detect VGA Cable
Aug 26, 2009I am connecting to a Samsung 32" LCD TV and it connects fine with my Toshiba, Alienware but with my VAIO Z, nothing happens only check signal cable is display (even though the VAIO Z identifies the second display as Samsung). When I restart the PC I saw the image transmitted. When it is fully restated they separate again as if it is not connected.
This occures with both graphics cards the Z has. I am running VISTA business. Is there something I am doing wrong. I do not have an HDMI cable now. Only the VGA. It this a faulty graphica card (both of them?) Both graphics cards work fine with no problem though or is it the port or the software?
Apple :: DVI --> HDMI Cable Work
Jun 23, 2009I currently have a 13" Unibody Macbook and I'm looking to hook it up to a 32" Sony Bravia LCD.
I am looking to purchase the Monoprice Mini-DP --> DVI dongle and hook that up with my Monster 400 HDMI to DVI cable.
I have the very same cable which I use to connect my HP desktop to my Sony LCD TV.
My only concern right now is what I read about DVI-I versus DVI-D. On the cable's packaging it says "SINGLE-LINK Connection ... For connecting HDMI to DVI components up to 1080i resolution"
I'm looking at the pins on the DVI portion of the cable and its group liked this:
9 pins (3x3) SPACE 9 pins (3x3) SPACE horizontal metallic piece.
The Monoprice adapter and the Apple adapter looks different in terms of the slots which the pins will go through.
I just want to make sure I have right components before I buy the adapter.
HP 14-G008AU Networking :: Don't Have A Cable Connection
Oct 21, 2014i have a trouble on my new clean install laptop.i got every single driver on windows 7 home basic working normal except the wifi problem.i don't have a cable connection, i use modem for the replacement as well.
View 5 Replies View RelatedDell :: Cant Get Audio Out With DP -> HDMI Cable (E6400)
Sep 18, 2009Ive got an E6400, great machine.
im trying to hook up my LCD (LG 720P) with DP to HDMI cable
the video is great but there is no audio, ive tried with my friends tv (sony 1080P), audio goes great, im on win7 and th graphics chip is intels GMA
windows recognizes my tv but there is no audio
Dell :: E4200 ESata Cable Stuck!
Apr 9, 2009Yeah so my brand new E4200. Went to install Ubuntu on it. Voila the Esata cable connecting to the external drive refuses to come out of the notebook.
Please tell me there is a magic button that I have to pus
Dell :: Wierd Lan- Displaying Cable Not Connected
Jun 11, 2009I own a Studio 1555 and i am having this peculiar problem with my onboard LAN connection. The LAN cable is connected to the NIC, yet it is displaying cable not connected. I need to reconnect the cable (remove it from the NIC and reconnect it) and it displays cable is connected and the connection ensues. Once i restart the machine, the same is displayed and i will have to reconnect the cable once again in order to get connected.
I do not want to reconnect the cable every now and then, when i reboot the laptop..
Dell :: XPS M1730 HDMI Cable Connection
Jun 21, 2009I'm a proud owner of a DELL xps M1730 laptop. Recently I experienced using my laptop on my television screen (LG). However, recently something went wrong. When I try to establish the HDMI connection my laptop won't change it's screen to the television screen.
It changes the resolution on the laptop screen and that's it. When my friend get's here with his xps m1730 it does work for him.
I tried connect a screen trough the DELL quickset but nothing I do seems to help and it is hard to find information on the web concerning this issue. Maybe it is a very easy procedure and I misschanged some of the settings....
Sony ::Vaio Z Keyboard Cable Ribbon
Apr 18, 2010Was a happy owner of the new Z (HDD model) and was looking to do some work with installing a new Intel X25.
The disassembly process went fine at first but things fell apart on the 2nd go (when I did to open it the 2nd time to fix the rubber part holding the HDD)....
Acer :: Poked Out The Cable That Connects Motherboard To LCD
Jun 1, 2009After I was done cleaning my vents and fan today, I was greeted with a white screen upon booting up.
Since the screen gets power, and it works when connected to an external monitor, I do believe I have accidentally poked out the cable that connects motherboard to LCD.
And since that's under the not-user-accessible portion of the case, it may take a while for me to get at it.
Acer :: Microphone Cable Updategreat Service
Nov 24, 2009Last week I dropped my 3810TZ from a table and the LCD panel hinge cracked. Then I got a call from Acer about the mike cable overheat repair and if I wanted to send it in. I thought just do it and went for it.
I put a sticker over the broken hinge that just said 'repair?' and send the machine in.
Today it came back with a brand new LCD panel!
Sony :: VAIO Model: VGN-TZ130N Cable
Jan 26, 2009said cable (image attached) in US or Canada.
View 3 Replies View RelatedApple :: Using A MiniDisplay Port -> HDMI Cable For MBP
Jan 2, 2010Does anyone here own these cables [url], or a different brand? If so, would you care to share what you think about them and if it's better than using the MDP to DVI converter?
I'm thinking about pulling the trigger on these but it seems that this is a new product and there aren't that many reviews yet so I'm still a bit hesitant.
What are your thoughts?
Or if anyone owns the adapter [url] .
Also, I'm seeing that you can't get audio through the adapter for the MBP. If that is the case, would I be able to get audio if I went through the MDP -> DVI ->HDMI route?
