I get an error "Display settings could not be saved" (german win7 version), when I try to select either of the flipped screen modes in Display - screen resolution
Also ctr-alt-left performs only one 90 rotation and does not rotate further.
I need the screen to rotate 270, how could I do this?
Dv6, radeon hd 6770M, hd graphics sandy bridge
When I set my Yoga 13 to tablet mode and set the orientation to Portrait mode, it throttles the CPU to 0.78 ghz and no matter what I run, it won't bring the CPU back to normal. Once I flip it back to laptop mode, it's back to normal. There needs to be an option turn the throttling feature on or off at will.
The other night I was showing my neighbor this glorious laptop and while demonstrating the game Birzzle, once in portrait mode, the game started freezing up because the CPU couldn't keep up.
The fan, and I guess the system, does not turn off when going into sleep mode after the set 10 min of no activity but will if I go to sleep mode manually. I have already had to have a replacement fan after a year which I am sure was due to this issue.
View 1 Replies View RelatedI have an Hp Pavilion Enternainment PC (HP Pavilion dv7 Notebook PC), 64bit, Windows 7, Service Pack 1. The pc is integrated with a HP xb4 Notebook Media Docking Station and a HP 2509m flat screen monitor. Unless I have turned the volume completely off, I continually get a volume icon (showing the current volume setting) intermittently displaying in the center of the flat screen monitor. I am unable to move it to any other location on the flat screen display or to the pc monitor.
View 2 Replies View RelatedI am having problems connecting an external monitor, Dell 2709W, to my Elitebook 820 G1.
I have an Intel HD 4400 graphics solution. The monitor says:
Out of range signal
Cannot display this video mode
change computer display input to 1920 x 1200 @ 60Hz.
I use a Display Port cable for the connection.
My OS is Win 8.1 64bit
I have used the HP support assistant to update all hardware drivers...
I was just streaming this 500+MB video of Starcraft II off their website, and I was wondering:
Since the video is completely streamed, that means its downloaded, right?
Where would I find the file on my HDD?
I wouldn't want to have to download the whole 500+MB again.
On my old W520, it had a setting for making the battery last as long as possible. E.g. it didnt charge it to 100%.In my W530, which has windows 8, I can find no such option. In fact, all the Lenovo tools which came with the W520 dont seem to exist on the W530 (eiter because they dont have them for Windows 8, or they dont have them for the W530, dont know which).
The only lenovo tools I have are th "solution senter" from red icon in the task bar (which has a battery icon, but the only thing it does is say "batter is in good condition", there are no options or settings, and the thinkVantage button, which just brings up somehting like some shortcuts to control panel items - no Lenovo tools (just things like update drivers, warranty infomration, keyboard settings etc).
In the wiondows control panel itslef, are just: lenovo system healthlenovo update drivers 32bit (I never use this as I have 64 bit)Lenovo airbag protectionLenovo microphone muteIn control panel -> Power options is nothing Lenovo specific, and no lifespan mode, it only allows you to set when windows switches stuff off.
What happened to all the tools which came with windows 7, including the thing which told you how fast the processor was running, the thing to change your printer etc. with different locations?
I have a new Flex 14. When I turn it on, I frequently get the following message "The battery is charged to a high capacity. Staying above 70% of capacity for a long period of time is adverse to the battery health. Enable 'Conservation Mode' in Settings." I can not find "Conservation Mode" in "Settings." ?
View 5 Replies View RelatedI have a 2.2GHz 15" Intel Core 2 Duo Macbook Pro with the factory 120GB hard drive. I want to upgrade the hard drive in the near future and have a couple questions:
1. Is there a size limit? (memory)
2. I hear that 7200RPM can be loud and/or cause vibration. Have any of you guys experienced this?
3. Is it SATA or ATA? What's the difference?
4. I noticed some are 16MB and some are 8MB. Does it really make a difference?
6. What's the best place to buy online?
5. These are some of the hard drives that I was looking at: [url]
I own a Dell Inspiron 1110 which I had since 2009 with no problems. I recently had to use the original Dell system disk to install the win os, and I also used the driver disk to reinstall them. I have been recently using my computer with win 7 Home Premium on it , everything works ok, except that when I turn on the computer to start it I must now select windows 7 to boot the os. Before the machine would automatically show the Dell logo and then startup without me having to select the os. Well I decided to install my Professional win 7 os today. I thought that it would automatically boot to where I needed to only put in my password, but instead it does the same thing as win7 Home Premium it makes me select the os. So my little question is what do I do to get a startup where I do not have to select the os.
View 1 Replies View RelatedPlease post only setting of your screen settings, just having problems finding the right colors.
View 3 Replies View RelatedI recently upgraded my laptop from the 8920g to the 8930.
My only gripe with the 8930 is that there seems to be alot more backlight leakage in this model. Not so much around the edges (a thin line along the bottom but I guess that seems to be the case with most displays) but more streaks down the middle. Quite noticable if watching a movie on it at night.
What I am trying to do is change the brightness/contrast etc.. settings. I go in to the nvidia control panel settings and can adjust the bars up/down but nothing on the display changes. I can put everything on 0% but it still looks exactly the same. I click the apply button, even try a reboot but still no joy. Is there another way to do this or is my graphic card faulty? I've only had the laptop about a week.
Also, does anyone have any recommended display settings?
I can't change my laptop brightness neither with F2 and F3 keys nor in the settings. I have already updated all my drivers but still have no response when adjusting brightness. I have an hp pavilion sleekbook 15
View 1 Replies View RelatedHave you guys found any ways of improving the display quality of the E6400 WXGA+ LED backlit screen? I've noticed that compared to my Lenovo 19 inch widescreen LCD monitor, the colors are less rich, the blacks seem less deep (almost a bit washed out)
View 8 Replies View RelatedI have a Dv6500 series notebook with C2D 1.5 GHZ processor and Nvdia 8400gs Graphics card.
My notebook came with vista preinstalled which i did'nt like...
so I Installed XP primarily using the guide at this location
www.nogodforme.com
and
Installing Windows XP on the Intel based dvx500t Series
I have installed all the drivers mentioned in the thread and I dont have any "yellow" marks in the device manager...
The problem is With Vista there was a toolbar option that displayed "battery level", "charging status" and allowed to use the following settings
1)Power saver
2)HP recommended
3)High performance.............
I have a zbook with a nvidia quadro 610m graphics. I cannot get the gpu to save settings or engage when playing games. It was working until I tried to give windows 8 a try.I did a fresh install of windows 8. Then I installed the hp drivers cd that came with workstation. Everything says it completed successfully and I've rebooted multiple times.
When I open the nvidia control panel, none of the settings I change stick. E.g. tell every program to use the 610m. I click apply it looks like it was successful. However, if I open the nvidia control panel again, all changes are reverted. I restarted after hitting apply too. It doesnt matter what the changes are, they all revert.
I'm guessing I screwed up with the driver install or something but IDK.The device manager says that the 610m is working properly and the driver is up do date.
My hp mini110-1145nr is in display only mode ...
View 2 Replies View RelatedI have a Acer E5-511 model and I need to install win 7 on it.But when we change the mode from uefi to legacy and reboot the system ,auto no display coming .Only display came in uefi mode.
View 1 Replies View RelatedI've a dv7-4170us that's out of warranty and a dead battery. I cannot get the computer to wake from sleep mode.
I've removed the battery, the cmos battery, the hard drive, and the cd-rom drive. Nothing will wake this thing!
The wifi light is orange, the caps lock is flashing. The mute button is not lit. NUM lock doesn't have a light.
Nothing, not even a mouse, is plugged into the laptop.
I have had my laptop for a couple of weeks. I am no longer able to change the brightness with f2/f3 as well as from battery settings.
Model:HP ENVY 15t-u000 x360 CTO Convertible PC
I've purchased a HP Pavilion 15-n011tu Notebook. I'm unable to install display driver for WIndows 8 (64bit). I've tried all 3 drivers given on HP site.
1.NVIDIA Graphics Driver (2013-10-02 , Version9.18.13.1170, 318.33M)
2.AMD High-Definition (HD) Graphics Driver (2013-08-16 , Version12.105.9.0, 204.81M)
3.Intel High-Definition (HD) Graphics Driver (2013-08-16 , Version9.18.10.3224, 136.34M)
I cannot adjust the brightness of my display using the Fn keys or the Control Panel... I have already had to replace my battery once... I need to be able to adjust the brightness in order save my battery life!
View 8 Replies View RelatedI am running Win 8.1 x64 (up-to-date) on HP Pavilion 1322TX laptop. There are Intel HD Graphics 3000 and ATM Radeon HD 7450M two graphic cards as the device manager window. Recently I am getting blue screens and later message appear saying the ATM driver stopped working. I found many problems with this driver in the past as well. When I check the relevent page for my laptop model, there is no update since 2012..
Can I update these two drivers seperately by getting updates from Intel and AMD sites?
Is there any update for catalyst control system (CCC) ?
When I try to update through the CCC or HP Support Assist, it is always no updates..
I changed my operating system from WINDOWS 7 ULTIMATE 32 BIT TO WINDOWS 7 ULTIMATE 64 BIT,and the problem is after changing OS my laptop is not displaying Brightness bar. Brightness is increasing and decreasing but it is not showing bright bar.
Any driver i have to install ? if required then driver download link.
for some reason the on screen display meter for my volume when pressing on the keyboard suddenly disappeared, I would like to get this back. I found this thread in the forum URL.... which another was having the same problem I'm having. The only difference is that I'm using HP Pavilion G7 with Windows 7.
View 1 Replies View RelatedThe monitor on my HP Pavilion dv9830us laptop has not been working for some time and I have had to use an external CRT monitor for my display. A couple nights ago, my operating system (Ubuntu Linux 10.04) failed to load and because I can't get video feed to my external monitor until the video drivers on Ubuntu loads, I am unable to run Ubuntu's repair feature and the beginning of boot.
Is there a way I can get my laptop to use my external monitor at all times, even at the BIOS screen? Is there a setting in BIOS for this?
I noticed the display automatically adjust its brightness when I open different webpages with different color background, which I'd rather it not do. How to disable this dynamic adjustment?
Product Name:
HP Pavilion dv7 Notebook PC
Product Number:
A5F92AV
OS:
Windows 7 home premium 64 bit
I put my laptop on sleep by closing the lid but after some time when I open the lid it doesn't show any display. I tried to on the laptop by pressing power button but it doesn't responding. I bought it around 4 months ago.
View 1 Replies View RelatedThe Acer M5 series..
The display doesnt wake up inspite of updating the graphic drivers and BIOS. I checked the settings on the power management still no response.
Everytime i have to wake up the laptop screen i have to long press the power button and restart the laptop.
I have Windows 8.1 updated.
Just purcased Aspire E1-510-2611 - 64 bit, Windows 8.1 - as it was set up in store as display model it appears to be in "Display Mode" - with account already entered, etc. How do I reset to factory defaults so that when I turn it on it is just like turning it on for the first time or is there a better way to get back to the "just out of the box" condition?
View 3 Replies View Related