I have a new Pavilion g6 2269wm Prod ID: C6P02UA #ABA.One of the first downloads via Support Assistant included "HP Quick Start" Ver 1.0.4660.30220, Softpaq SP59322.The install failed.
View 5 RepliesHP Pavilion g7 2269WM W/ Windows 8.1(64bit)
I recently purchased an Insignia powered USB 3.0 hub to connect 2 External HDDS to my PC via 1 of 2 USB 3.0 ports.
HDDS -
1. Western Digital My Passport Ultra 500 GB
2. 500 GB SATA drive from another laptop put in an enclosure.
Both work just fine plugged in alone, plugged into the hub with the hub plugged into the NON 3.0 USB port.
But the second I plug the hub into a USB 3.0 port, wifi goes out, and sometimes 1 of the drives are not found.
When I unplug the hub, wifi continues to work.
I have tried doing this with the hub plugged into power and not, same results. What is the issue causing a wifi issue? I dont understand how any of this is even related to a network connection.
Are both needed for the volume and mute keys to work as well as play/paul skip etc? I am running into an issue on bootup where something sort of drags and I think its the software that goes with these buttons. If I try to use the system to early I can crash explorer. I was able to do this on two brand new laptops. Or would I be better installing the lastest Sound driver, quick touch?
View 4 Replies View RelatedSony Viao (NW series at least) have a quick boot feature for access to the internet without fireing up your operating system. Hit the special quick access button and away you go.
Guess what, if it is a computer for your child you cant even turn the button off or set it with a password. It resides on your motherboard any parental controls mcafee or otherwise are useless. The system for the quick access is by devicevm and is called splashtop.
how to control this, keep in mind this runs straight off the motherboard and windows is not fired up.
i've frequantly had this problem , when i start my laptop ( hp pavilion 15n021se ) on the lock screen when i'm going to click to enter my password , just after moving mouse cruser i get the blue screen saying that the error is " invalid process attachment attempt "
i searched for this error and most results was meeting my thoughts that the cause for this error is the touch pad driver .
i've installed the latest version of the driver (sp64225) , and it doesn't suitable for my windows so i want a previous version of the driver
My screen gets black when I start windows 7 on my Hp Paviliom Dm1 Notebook. Also I connected my pc to an external monitor through VGA cable and then I can see the windows operating system in the external monitor . I did a start-up test and then I got these results:
Memory Test: Passed
Smart check: Passed
Short dst: Passed
Optimized DST: Software Error
Battery test: Primary Passed Secondary - NOT Installed
PCI Device check: Passed.-----------------------------------------------------------------------
Start-up Test: Passed
This device cannot start. (Code 10) and show with Exclamation mark !!!!!!
Device ID:
IUSB3ROOT_HUB30&VID_8086&PID_9C31&REV_0004&SID_2166103C
Cant find and place hp quick launch buttons for my hp pavilion g6 1204ey windows 7 64
I don't understand. all buttons works,except f2 and f3 screen brightness. The program on the computer isn't installed...
I'm having this extremely annoying problem with my HP Pavilion dv6-model1334us. Everytime I try to start up my laptop it always shows the menu screen saying Launch Start Up Repair or Start Windows Normally. I've tried to do a system restore multiple times, but the screen just stops on a blue screen. No it isn't the Blue Screen of Death, but it does attempt to start but fails and stands on the screen until it automatically or manually shuts down.
View 7 Replies View RelatedI took delivery of a HDX16 - 1030EA last week. The MUTE button works but does not go white, it is continually red even when sound is playing. I have uninstalled the quick launch software & re-installed same. No difference.
I am running Vista home premium 64 & used the 64 drivers.
I need Dell Quick Set for Windows XP so my Eject button on my notebook will work.
Does anyone know where I can find it?
I have HP DV5T-1200SE
It came with vista installed and when i pressed the volume buttons on top of the keyboard a gray bar used to come indicating the volume...but when i installed Windows 7 the gray bar is not coming....even though the buttons function properly(that is volume goes up and down) (pressing the volume touch button increases the volume, but does not display the volume slider window on the screen)
I even installed the latest HP Quick launch buttons Windows 7 driver:
[url]
and I also tried this one:
[url]
quick play driver for windows 7 ultimate...
View 5 Replies View Related[url]
This is what I have, and I imagine HP probably use the same drivers for most of its late model laptops on windows 7 for the touch activated media button i.e. the back lit strip above the keyboard just below the LED screen that let you activate WIFI, sound. playback..etc..
I have read from several posts that windows 7 install fine on HP laptop just that the touch strip driver does not work with the factory drivers.
I have reinstalled my laptop with a fresh windows 8.1 install.
I have managed to install all the drivers and software except the quick launch buttons. I am unable to find the correct software.
I have the following Laptop: HP ENVY 17-j053ea Notebook PC
How I get the quick launch buttons working. I have run the HP support assistant software and it says nothing else needs updating ?
I've got ap HP Pavilion dv6 - 3000so. When I try to start it. There comes a blue warning and it sayes: Enter Administrator Password or Power on Password! I try different passwords form the machine, but the new tekst is Invalid Password! After 3 wrong passwords a new tekst comes up: System Disabled and Key: 50118153!
What can i do to start my computer?
I was install new windows 7 x64, i have turn on AHCI, then when installation was finish and reboot windows start and freez, i only see black screen and white curosr.
When i turn off ahci i was fine, but i need ahci to turbo memory.
Pavilion dv6 won't start up - black screen
View 9 Replies View RelatedI have a hp pavilion g7, operating with windows 7As of this evening, my laptop is failing to start up and freezes on the 'starting up' page display. After doing several of the recommended options, I ran the start up test which has failed.
The display screen reads-Memory test: passedSmart check: passedShort dst: failedFailure id: GU6E00-63479L-MFPX01-60TP03Product id: A7A44UANBAHard disk 1Start up test: failed
i have hp pavilion g4 notebook pc model g4-2308tx i have a problem with fan internal, and if i turn on the laptop i get the notice about error fan (909) so what can i do for solve the problem about the fan internal?
View 3 Replies View Relatedforgotmystartuppasswordonhppaviliong6
View 7 Replies View RelatedI have a HP Pavilion dv6 that won't start up-- black screen and I've tried a hard reset and that didn't work. It does beep If I take the memory out. But the fan, the wireles, mute, and caps lock lights are the only thing that work.
View 7 Replies View RelatedMy laptop is hp pavilion sleek book 14 and i have installed ubuntu as second operating system and when it starts the start up option is not displaying....
View 1 Replies View RelatedI have a Pavilion G6 that won't start at all when the power button is pushed. I've tried it on battery only, and with the power cord plugged in. Yet nothing.
Here is what I see: When the power cord is plugged in, the power LED next to the port is white. I press the power button and it momentarily flashes white (and the F12 LED flashes). Nothing else happens. No other LEDs lite, and the screen remains black.
DIagnostic steps followed:
1. Battery was removed, and unit unplugged. Power button held for 30 seconds, and plugged back in. Nothing.
2. Battery removed and unit plugged into the wall. Power button pushed and nothing.
3. Tried a different power cord, different battery .. nothing
4. Removed the RAM boards, power button pushed .. nothing
5. Removed the hard drive (RAM still uninstalled), power button pushed .. nothing
I am getting an "Enter Administrator Password or Power On Password" display on my HP Pavilion x360 and cannot start-up my computer. After trying to figure out my password i get the message "system Disabled" with the code 73526620.
View 3 Replies View RelatedI'm having problems with my laptop (HP Pavilion dv4 1428dx) the last thing I did was put it to sleep, then cameback and tried to wake it up but it would not start up. All the lights are on, but the screen is black and the only thing I hear is the fan moving. The caps lock and num lock keys have a blinking light, not really sure what that means. The power LED is on, the battery LED is on, but the hard drive LED is not on.
View 9 Replies View RelatedWhen i RESTART my laptop [pavilion dv6c16nr] it says that press ESC KEY TO START UP MENU but when i press esc/escape key nothing happens...
View 6 Replies View Relatedive had my computer for years(warranty has expired) and it has worked very fine except it has been always very prone to overheat. A week ago it overheated(again), and after that it hasnt started anymore. I press the power button, i see caps light once or twice(yes indeed, when starting it might show once and then next time twice and so on..). startup goes like this: first there will come normally that screen where reads "press ESC to startup menu", hten screen goes black and it should open windows but it doesnt. Instead it makes an restart and does that all the time. Ive ran all diagnostics and those are just saying passed to everything. I have also tried "hard reset" but that has no effect. Also F11 in startup(system recovery) doesnt work.
View 2 Replies View RelatedPavilion dv6 - 6c04ea
Windows 7 Home Premium 64 bit
Suddenly, I have begun to receive a message on Start Up from HP Battery Alert. The message tells me that the level of the battery is critically low and that I may have to replace it. There is a web address offered to find out more - www2.hp.com/techcenter/startup/ (that address led me to this forum)
The battery charge monitor in the far right of the status bar tells me that there is no charge in the battery so that I can't use it without the mains lead. It also tells me that it is not charging, even though the mains lead is connected.
Problem: black screen 3 beep at startup
Yesterday, I finished my work and hibernated my computer. When I came back, I could not turn on the computer. It goes automatically to a black screen and after 15 seconds I hear beeping noises. It's one long beep followed by 2 quickly beeps. Rebooting just repeats this process.
I went to the HP troubleshooting page and found this from my symptoms
[url]
It tells me that 3 beeps mean module problems. So i ended up testing both my memory sticks in a different laptop and they were fine. And I tested both individual pavilion memory slots, and still got the same 3 beep black screen on both. iif i was to have no memory sticks in, i still get a black screen but a different set of beeping noises, not sure if a laptop can run without memory sticks, but i figured i check)
Has anyone had a similar beeping noise black screen problem at startup?