For accelerating my 4730s I bought a Seagate SSHD ST1000LM014 and built in. On trying to install a new Windows 7 (64bit - german) with original HP Recovery DVD installation starts.
The SHHD is recognised, a (primär) partition can be created. But then an (german) Error message appears:
"Beim Setup konnte keine neue Systempartition erstellt ... werden. Weitere Informationen finden Sie in den Protokolldateien zum Setup." It's a bit strange, because it seems a (system) partition WAS CREATED.
Because at this point is an Windows-7-opion for loading drivers "Treiber laden", a special HP driver is required?
I'm using HP ProBook 4730s, product A1E71EA. I recently installed windows 7 ultimate x64 and I went to install my drivers. There i have two of them that say 'base system device' when i try to automatically update them using upade driver it says that it cannot do it.Also i have there one that says network controller, one is universal serial bus, pci simple communication and an unknown device.
I resently brought a new laptop probook 450 G1. I want to download drivers for windows 8.1 operating system. When I check the driver download page it list many drivers for e.g under wirless network they list many drivers. How do I know which one to download exactly. I tried finding exact specifications for my product but they only have a general one for the model no which described all posible haredware.
I attempted to upgrade my Win 8.1 ENVY DV7-7230US laptop to Win 8.1 via the App store. It said I had to clear all the updates first. So I went the System Updates Screen. When I clicked on it to see what updates were needed. The circling wait symbol appeared and never went away. I can not do any system updates, thus I can not download and install the FREE Win8.1 upgrade.
I upgraded my probook 4440s from windows 7 pro to windows 8.1 pro. I have installed hp protecttools but I cannot enroll my fingerprint. No access to enroll.
I had to re-install Windows after a hacker locked my system. I hadn't had the unit long, so didn't lose tons of important data or files. But, I hadn't had time to really get to know my system either....so now I have the new issue of trying to determine what all the hardware is that is not recognized. I thought I would come to hp.com, find my drivers, download and be DONE.
(HP ProBook 4440S running WIndows Home Premium, 34 Bit)
I have yellow exclamation marks on the following devices in Device Manager:
1. Base System Device 2. Base System Device 3. Ethernet Controller 4> Network Controller 5. PCI Simple Com Device 6. USB Controller 7. Unknown Device
If there weren't SO MANY drivers, this could be simple!
When I open a new window on my Dell Precision M6600 Windows 7 64 bit professional Laptop, that window will randomly have an "always on top" attribute. The problem does not seem to be related to any specific application.
I just did a clean install to Windows 7 professional 64-bit from Windows vista home premium 32-bit as my laptop is capable of running 64-bit version of windows.
However, i completely wiped out my drivers for my sony buttom functions such as the utility button for FN keys and also control centre, power management, event service and etc.
I have went to the Sony Europe esupport to get the drivers. Is there a particular order I need to follow while installing them since I read from somewhere that you need to install the drivers in a particular order for them to work since they are dependent. Also, many threads say to install the 'sony DLL utilities' or 'original utility package' file which does not apply to my Sony Vaio version. However, I did notice 'setting utility series' folder in the download driver section. Are they the same?
My x220T (Tablet) is current running on Windows 7 Professional. I was wondering if this device has all the drivers should I upgrade to Windows 8 Professional?
i am purchased hp 15-d009tu laptop for corporate use and installed windows 7 professional 32bit try 15 to 30 type display drivers are downloaded its not supporting. Error message are the system should not meet the requirement.
I'm trying to upgrade the operating system on my laptop. Preinstalled Windows 7 x64 Home Basic, and I update to Windows 8 x64 Professional. At the end of the installation process hangs and all I see on the screen - this is the logo in the center of the screen, a few words at the bottom and five frozen in one position points that previously ran in a circle.
I repeated the installation several times, but all of these attempts have ended the same way.
Have any of you have a similar situation and how you solved it?
After doing a fresh install of windows 7 Professional 32Bit, my wifi drivers did not install, i have tried numerous drivers of the website for my laptop and they don't work, ive tried many things but cant seem to find the right drivers, my laptop is a HP Elitebook 2530p, can find the correct drivers for my wifi Card?
Dropped computer during move,lost all the disks and paperwork.Hard drive was damaged so purchased new one locally..Downloaded ISO win 7 86,installed used original validation.It booted up all fine but no drivers for mouse or Ethernet or wifi actually no drivers.Mouse works.
How can I download the drivers and save them to CD/DVD and install on machine.
I am trying to download drivers for a Dell Inspiron 14Z -N411Z to a USB drive through another laptop, because the hard drive on that Dell completely gave up. There is no installation software disc as it was on another partition on that same hard drive.
When I attempt to install the drives required to the USB drive on my Toshiba, it first wants to install the dsd.exe file before I can download the drivers. After I downloaded that dsd.exe file, I don't seem to find a way to install the required drivers as well. the DellSystemDetect.exe file wants to do that for me, but it is not on the correct laptop.
What do I need to do, to get those drivers downloaded on the USB, so I can complete the installation. I already installed the Windows 7 Home Premium (x64) on the Dell laptop.
How to install the latest version of the HP HotKey Support softpaq silently, and without a restart?
The laptop I have is a Probook 6570bThe OS is Windows 7 Pro x86The softpaq is: SP59202 (version 4.6.10.1)
The previous versions of this allowed for a silent, no-restart installation but the latest one is different.
I can get it to install by extracting the Setup.exe from the SP59202 executable and running it with the switches: /S /v/qn but it always restarts the PC at the end.
I have both Intel and ATI switchable graphics in my laptop. I recently reinstalled Windows & If I try to install the ATI drivers from the drivers CD or from the HP website, the laptop hangs on the Windows logo after a restart and I have to do a system restore to fix it. If I try to install just the Intel driver it just gives me an error that says "This computer does not meet the minimum requirement to install the software". I am unable to change the brightness and the resolution is bad. In Device manager both the options under display adapter say "Standard VGA Graphics Adapter", with a yellow error sign over one of them. I am worried if the graphics card is damaged from over heating. Is it possible to disable one of the cards to check functionality of the other?
I've a ProBook 4530s core i5 radeo graphics and have installed windows 7 professional 64 bit. i now want to install the graphics driver (radeon) but am failing, the laptop if i try to install will not boot or it shows a blu screen of death. the bios version is F.40. how to i get around this problem...
I want to install AMD Video Driver and Control Panl alongside with Intel Video Driver and Control Panel.
Here is My Laptop System Information :
OS Name Microsoft Windows 8.1 Enterprise Version 6.3.9600 Build 9600 Other OS Description Not Available OS Manufacturer Microsoft Corporation System Name TUHIN System Manufacturer Hewlett-Packard
I am upgrading my Sr490 to windows 7. I was wondering what software I have to download and what drivers. I am also looking for the one click check up and vaiocare stuff that came with the sr490 originally.
I tried to recover my PC to factory settings using the CD's that I had created with OneTouch Recovery software. However the recovery failed - perhaps due to scratches in the disk.