Lenovo 11e E/Edge :: ThinkPad E330 Can't Get Into BIOS / UEFI Anymore
Sep 2, 2013
I got a really annoying problem with my E330. It came without an OS, so I put Win 8 on the preinstalled HDD. Then I switched it out for a SSD and put Win 7 on it. (everything in UEFI mode)
Since then I can't get into the BIOS/UEFI anymore by either pressing Enter or F1. Pressing Enter still gives me a beep, but then Windows continues to load normally instead of showing several options like it used to do.
And yes I'm aware that I need a cold-boot in Win 8 to get into UEFI ... The only way to access UEFI at the moment is through the Win 8 charms-bar restart into UEFI trick.
I tried already to reflash the BIOS which doesnt work obviously since it's the same version, tried removing the CMOS battery, that gave me a one time opportunity to get into the UEFI with F1 when it complained about the date/time.
Switching to Legacy only leads me to an infinite PXE - something error loop, but I still cant get into the BIOS.
I tried pressing every combination of Fn+F-Keys and without Fn. Nothing works. I don't want to return the notebook, but it's a deal breaker for me if I can't get Win 7 running on it with accessible UEFI.
View 2 Replies
ADVERTISEMENT
Sep 23, 2012
I recently bought a new E535 laptop working like a charm up to now. Bios access was possible by pressing Enter directly after switching machine one, than came some sort of POST analysis which could be skipped by pressing any key and than came some sort of table where I could access Bios by pressing some key (cannot remember which it was exactly). Alternatively I could enter Bios when in boot menu by pressing tab which switched to another tab where Bios could be entered (also some sort of diagnosis programs could be started). As mentioned in the subject it is impossible for me to do this now, after I did the following:
- exchanged built in HDD with an new SSD (Bios access yet possible)
- changed in Bios Setup boot mode from both (legacy + UEFI) to Uefi only (this might be the problematic point but I'm not sure)
- Installed Windows 7 in Uefi mode on ssd
No when I press enter on startup it brings me to Windows boot manager menu (you know where you can say start Windows normally or in safe mode and so). Boot menu also changed with a new "start windows" entry (well, this seems to be correct), but when switching to the other tab it is empty now, no entry for Bios setup or diagnosis tests anymore.
This is really bad. I have googled around and tried the following up to now without success:
- Pressing F1 instead of enter
- Shutdown laptop, and start with F1 pressed down
- starting without HDD
- starting unmodified HDD which was originally installed in laptop (which cannot be booted anymore, probably because it was installed in legacy mode)
I have also thought about flashing the bios, but the newest version available on lenovo support seems to be 1.04, but pre installed on my laptop is 1.10, so my version is a lot newer. Should I try to flash it nevertheless ?
View 4 Replies
View Related
Feb 4, 2014
After i uninstalled Lenovo's Access Connection SW my WIFI does not work anymore.
1. My laptop does not see any WIF newtork (even though available)
2. In the mobility center there is no WIFI option (to switch on/of)
Link to picture
3. In device manager all is fine (I even reinstalled the driver several time)
Link to picture
4. If I use the Intel diagnosis tool fails the hardware test
5. using the FN F9 key, i have the information that WIFI is on
6. wifi is enabled in BIOS
7. in the Network connections. WIFI adapter shows enabled and on properties says that is working properly
Link to picture
Unfortunately i do not have a previous restore point. I reinstalled Lenovo's Access Connections but did not work.
View 2 Replies
View Related
Feb 9, 2013
I have a Lenovo Edge 330 (E330), with win 7 pro pre-installed. I'm annoyed by all the software that's installed together with the laptop, and I'd rather want the laptop with a clean install of Win 7. I have a Win 7 Enterprise, but not a Pro. If I attempt to install Win 7 Ent., would this cause any trouble? Drivers for all hardware seems to be available from the support site, that shouldn't cause any problem.
View 9 Replies
View Related
Nov 22, 2012
It seems I got the same problem that customers have with the T530. After removing the bios password I have no chance to get into the BIOS.
Bios Version: 1.11 (uefi only enabled)
OS: Windows 8 (x64)
I tried:
- Remove all drives (mSATA SSD, ODD, HDD)
- Press F1 at the Lenovo screen
- Tried all options in the Windows boot menu
- Pressed the Enter key at the Lenovo screen
Unfortunately there don't exist a BIOS update for the W530. So how I get into the BIOS?
View 9 Replies
View Related
Oct 14, 2012
yesterday my E330 arrived with no operating system installed. After the Windows 7 Ultimate installation was finished I was already disappounted, because no driver was detected. So I had to manually download all drivers from the slow lenovo site. After I installed all drivers (also BIOS updates and Win updates) the Wlan wasnt working. Tried both, the realtek and the broadcom driver, none of them is working. Can't conntact the support because the page won't load. After a few hours of trying to fix the problem I dont know what to do anymore.
View 6 Replies
View Related
Aug 7, 2014
I bought a ThinkPad 540p that comes with preloaded Windows 8.1. As I want to dual boot the machine I tried to select the Legacy Boot option in the BIOS/Startup tab, but I can't do anything as the option UEFI/Legacy Book is greyed out and locked in "UEFI Only". Below it there is an option called: -CSM Support that is also greyed out and selected as [No]. (below these options there is a little note with an asterisk saying "Unselectable for Secure Boot").
How can I enable the UEFI/Legacy Boot option again in order to dual boot the computer? I want to be able to boot from USB or from the CD Drive.
View 2 Replies
View Related
Nov 5, 2013
I have Thinkpad Edge E330 bought this July, with win8 downgraded to win7. It recently started a problem where the laptop's own display doesn't display anything (just blank) if I don't have external display connected. The external display doesn't have be in use, just connected, and E330's own display works fine. If I disconnect the external display, the E330's own display goes blank also. It doesn't matter what display setting I have.Currently I'm not able to use my E330 as a laptop at all.
View 2 Replies
View Related
Jan 17, 2014
I have just installed Windows 8.1 x64 on my Lenovo E330.
I downloaded drivers from the website, and installed all of them. But after that there's one device listed as Unknown in device manager, and I can't figure our which device it is.
Hardware ID is {48126E0D-4BDD-4D26-8A24-569C7AB522D6}SettingsDriver, so that doesn't identify the device.
Info from Solution Centre: Product: 3354AF7
How to identify what driver I missed to install
View 8 Replies
View Related
Dec 13, 2011
I am currently working on a ThinkPad Edge 15 0302-2BU for a client of mine. The system is able to POST and I can enter the BIOS but the UUID is all zeros and the Machine Type Model, System-unit serial number, and System board serial number are all blank.
I went to the support page for this model and downloaded the ISO file with bootable BIOS update utility for BIOS ver. 2.20 (82ET80WW) I updated the BIOS in case there were any issues with the current BIOS release. Rebooted then went to update the model number off the bootable utility. I entered the model number, Updated, and Rebooted again. Still having the same issue. The model number didn’t record after I punched it in.
I am still able to POST and get into the BIOS configuration. The system will not load an OS or boot off a CD into something like Windows PE.
I'm not sure if Windows not being able to load is due to the BIOS or not but I'm inclined to think so since I have trouble booting off CD.
View 5 Replies
View Related
Apr 20, 2011
When will there be a BIOS update to fix the UEFI/Bitlocker issue? The TPM won't pass the keys to Windows when UEFI mode is on. An X220 owner has this issue as well: [URL] ....
View 9 Replies
View Related
Aug 13, 2012
ThinkPad Edge, Win 7 Sp1. For the last month I have had a problem with the control key always down. Programs react as if the control key were pressed. MS Word 7 gives an error message that the control key is down and asks if I want to go to Safe Mode. I have had the keyboard replaced with no change. The computer has been thoroughly checked, all drivers, patches, software upgrades have been made by my Tech, and the Bios has been flashed.
Last week, I found a post on Google for Win XP where the poster had the same problems. The fix was to ensure that the Sticky Keys were turned off in Ease of Access on the Control Panel. I went to Ease of Access and turned off all of the selections, and the fix seemed to work. However, yesterday the problem reoccurred. I don't know if it is a problem with the motherboard, hardware, or with Windows. It appears that this problem affects more than one version of Windows.
View 9 Replies
View Related
Feb 20, 2014
My Edge E40 has no display, I tried
-Hard booting... 60 secs of holding power button without battery or A/c adaper
-Removing the RAM HDD CD and tried booting
-Attaching to my old CRT monitor
NOTHING works
How can one find if it is booting at all since there is no HDD indicator in E40..??
View 3 Replies
View Related
Jun 1, 2014
I just received my new E545 and booted it up. I've noticed the CPU is quite hot and so ran some software tests. It is showing the CPU temp around 92 degree C / 196 degrees F.
The chip is an AMD A10-5750M. I take it the heat isn't normal. Should I be sending this back to warranty?
View 1 Replies
View Related
Feb 14, 2010
I am experiencing issues with my touchpad on my Thinkpad Edge AMD with 4 GB Ram.
Sometimes the touchpad will work and sometimes it will not respond. When I restart the computer, it will work but not for long. I have the up-to-date drivers which came with the machine. I just received my machine 2 days ago.
View 9 Replies
View Related
Oct 5, 2014
I just purchased the E540. Running Win 7.1. I have 2 WD 3.0 Passport drives plugged into a USB 3.0 hub. The 3.0 hub has the correct cable for 3.0. They are not being recognized as 3.0 devices (I get a message). I updated the USB 3.0 driver on lenovo's site and BIOS is set to auto.recognize. I have also tried the 3.0 option in the BIOS but that didn't do anything. I also tried using the drives without the hub in one of the 3.0 USB slots but that didn't do anything either.
I have checked the forum but what I found was possibly purchasing a 3.0 cable (not necessary - my cable is 3.0 compliant) but that was for a Wn 8 system or updating 3.0 device driver (done). So much for plug and play.
View 3 Replies
View Related
May 11, 2013
This laptop shows "no operating system found" when I power up. I ran knoppix which works but I tried pressing F8 to get to the CMD prompt but it doesn't work, I can get into the BIOS, anything I can do in the bios to do either a system restore or run the recovery?
View 2 Replies
View Related
Jan 27, 2014
I just bought my ThinkPad E431, the camera is working fine. But after a while the camera stop working.
Link to image .....
View 9 Replies
View Related
Apr 5, 2011
I just reinstalled windows 7 on my edge 13 (cause the system really slowed down), everything's working so far, expect the WLan Device. The network adapter (realtek RTL8168D/Familie-PCI-E-Gigabit-Ethernet-NIC) is properly detected, if i plug in a Lan cable I have got a connection.
I already tried this Lenovo Update tool, it installed some drivers and updates, but still no change. I already tried all Wifi drivers from lenovo homepage without success. Hitting the F9 Button didn't change a thing.
View 9 Replies
View Related
Sep 16, 2009
I've had several laptops but I am hating this one and is basically the Fn Keys and F# Key. I am pretty customed to use keys like F4(invoking word magic), F5 (update), Alt+F4 (closing windows)...
So, now I have to press Fn + F4 Keys, Fn + F5 Keys and Fn + Alt + F5 Keys....
So is there a way to continue pressing just F4 F5 and that's it?
View 9 Replies
View Related
Jan 11, 2014
Just a got a brand new Thinkpad 540-E. So far this CPU runs like a beast(with a new SSD installed). I have one minor issue though...
GOAL:: Make the F1-F12 keys function without having to press Fn first.
So I've tried the three tips I've come across online. Here is what happens:
1. BIOS(ThinkpadSetup): I only get the option to switch the Fn and Ctrl key. There are no option in my BIOS to do anything else with the keyboard/mouse settings.
2. Holding down the Fn key for 30 sec to 1 minute: Nothing happens. I even tried to do a three minute press and hold. I had a blast, but nothing came out of that neither.
3. Entering the keyboard settings in Win 7 manually: So I have no trouble entering the keyboard settings window, but mine looks extremely limited. In fact I see no options to do anything in there besides updating the driver.
View 3 Replies
View Related
Dec 30, 2012
I have a Thinkpad Edge E520. The volume and brightness keys are working, but the on screen display I used to have is gone. I tried everything I could find on the web, still not working.
View 4 Replies
View Related
Jul 19, 2011
I am planning to upgrade my RAM on my E420(1141CTO). It already has a 4 Gb on one slot. Couple of questions here.
1. What is the max RAM I can go upto on this E420 (Intel i3 2nd Gen) laptop.
2. As I have 4 GB on one slot can I put one 8Gb RAM (single module) on the other slot.
3. What brand of RAM I can use.
4. On this model can I fix another RAM myself easily or asking it the other way are the slots placed such that I can do it easily by merely oepning a couple of screws or do I have to tear everything apart.
5. Any other special considerations like about clock speed ?
View 9 Replies
View Related
Jan 24, 2013
With this laptop, the CPU usage rises significantly whenever the battery is charging. If I'm on running on battery power or it's fully charged, I don't have this problem. The CPU stays at 2-3% while browsing the internet, for example. But browsing the internet while the battery is charging will send the CPU up to 90-100%. It's not just browsing the internet, but any task, such as running Sony Vegas, using Skype, watching a movie, etc.
Again, this only happens while the battery is charging. Everything runs much, much slower. All power management settings are identical whether it be running on battery or charging with the AC adapter, so it's not that. I am also using the 65w power adapter that was supplied with the computer, and the adapter becomes very hot to the touch while charging.
View 8 Replies
View Related
Jan 12, 2015
I have recently purchased a Lenovo ThinkPad Edge E540, with Windows 7 installed. I'm trying to use the integrated camera with Skype, but I can record no picture. When I try to install the Integrated Camera Driver from Lenovo Support, [UR], the setup always fails with Engrish error messages.
View 2 Replies
View Related
Nov 29, 2013
what driver is missing for the unknown device with the following specs from the "Device manager"
General
- ACPI-Compliant Embedded Controller
- Drivers not installed error Code 28
device ID
- LEN0068
got every other device running with propper driver (WLAN, Ethernet, USB3.0, Intel Chipset, VCard(both), Touch scanner, Audio, Monitor, Camera, Bluetooth, Cardreader)
View 1 Replies
View Related
Nov 7, 2014
I purchased a Edge E545 that came pre loaded with Win7 Pro 64. I created the Recovery disks for Win7 and used the Win 8 Disks to upgrade the OS. I have created a new NTFS partition on my hard drive and would like to install Win 7 to that partition. I have tried to load the recovery disks to install into that partition but I have not been successful; the boot disk won't even load. I downloaded the Win7 Pro 64 ISO to try and load it into that partition but the computer does not have the COA sticker under the battery like it's supposed to.
I have recovery disks that won't load at restart or cold boot and I have a perfectly good ISO that i don't have a COA to.
View 4 Replies
View Related
May 21, 2013
I bought a Lenovo thinkpad E430 recently with Windows 8 operating system. There is no print screen button in it even with Fn key. How to get print screen.
View 2 Replies
View Related
Jun 17, 2013
I just got a brand new Edge 335 with Windows 8 Pro 64 bit installed. It has 8 GB RAM, and AMD E2-2000 APU. I've had a couple of issues with this. One was that I couldn't turn on Bluetooth in Windows 8 (fixed by installing an older version of Thinkpad Hotkey features software). The other issue which is still unresolved is that of virtualization.
AMD virtualization is enabled in the BIOS. However, Windows 8 as well as the AMD virtualization tool both state it is turned off. I have, after searching these forums and the web, disabled it, cold booted the machine (removing battery), re-enabled it, cold booted again (also removed the battery). However, Windows just doesn't want to accept that it's enabled.
AMD virtualization and DEP were both enabled when I got the laptop from Lenovo. Is there anything else I need to turn on/ off?
View 7 Replies
View Related
Jan 16, 2015
I have bought my new E540 some days ago. My keyboard is Norwegian so there is a key called AltGr available which is used as a combinational key similar to shift. when I just press the key related to backslash ( it's '+') it works fine but when I want to type backslash (it's AltGr and '+' together) it does not work.
View 2 Replies
View Related
