Lenovo 11e E/Edge :: E330 - Wlan Driver Stopped Working After Installing Windows 7
Oct 14, 2012
yesterday my E330 arrived with no operating system installed. After the Windows 7 Ultimate installation was finished I was already disappounted, because no driver was detected. So I had to manually download all drivers from the slow lenovo site. After I installed all drivers (also BIOS updates and Win updates) the Wlan wasnt working. Tried both, the realtek and the broadcom driver, none of them is working. Can't conntact the support because the page won't load. After a few hours of trying to fix the problem I dont know what to do anymore.
I have a Lenovo Edge 330 (E330), with win 7 pro pre-installed. I'm annoyed by all the software that's installed together with the laptop, and I'd rather want the laptop with a clean install of Win 7. I have a Win 7 Enterprise, but not a Pro. If I attempt to install Win 7 Ent., would this cause any trouble? Drivers for all hardware seems to be available from the support site, that shouldn't cause any problem.
I have Thinkpad Edge E330 bought this July, with win8 downgraded to win7. It recently started a problem where the laptop's own display doesn't display anything (just blank) if I don't have external display connected. The external display doesn't have be in use, just connected, and E330's own display works fine. If I disconnect the external display, the E330's own display goes blank also. It doesn't matter what display setting I have.Currently I'm not able to use my E330 as a laptop at all.
I got a really annoying problem with my E330. It came without an OS, so I put Win 8 on the preinstalled HDD. Then I switched it out for a SSD and put Win 7 on it. (everything in UEFI mode)
Since then I can't get into the BIOS/UEFI anymore by either pressing Enter or F1. Pressing Enter still gives me a beep, but then Windows continues to load normally instead of showing several options like it used to do.
And yes I'm aware that I need a cold-boot in Win 8 to get into UEFI ... The only way to access UEFI at the moment is through the Win 8 charms-bar restart into UEFI trick.
I tried already to reflash the BIOS which doesnt work obviously since it's the same version, tried removing the CMOS battery, that gave me a one time opportunity to get into the UEFI with F1 when it complained about the date/time.
Switching to Legacy only leads me to an infinite PXE - something error loop, but I still cant get into the BIOS.
I tried pressing every combination of Fn+F-Keys and without Fn. Nothing works. I don't want to return the notebook, but it's a deal breaker for me if I can't get Win 7 running on it with accessible UEFI.
I have been using the Communications Utility (Lenovo - Web Conferencing) when I first bought the laptop, a few months ago everything was fine. But now when I press F5 (hotkey for camera options) there is a pop up with massage "Communication Utility Main UI has stopped working".
Everything is fine in Device Manager.
Is it a hardware problem? Is there a way to check?
I just bought "HP Pavilion 15 Notebook PC p000su-j2t31ea", installed windows 8.1, downloaded drivers and it seems like it works perfectly but wifi.
When I tried to install this Broadcom WLAN driver [URL]... its loading like on the half way on its instalation and drops then a message appears and asks me if the program worked well.
Ive tried to install that driver under Safe Mode and it loaded the installation, but when it was installing some error came out saying that the installation cant continue, because update.cpp 1205 is not found or something.I also tried to find the driver from broadcom's site, but couldnt find it. And now i can use e-net only via cable.
I have just installed Windows 8.1 x64 on my Lenovo E330.
I downloaded drivers from the website, and installed all of them. But after that there's one device listed as Unknown in device manager, and I can't figure our which device it is.
Hardware ID is {48126E0D-4BDD-4D26-8A24-569C7AB522D6}SettingsDriver, so that doesn't identify the device.
I just reinstalled windows 7 on my edge 13 (cause the system really slowed down), everything's working so far, expect the WLan Device. The network adapter (realtek RTL8168D/Familie-PCI-E-Gigabit-Ethernet-NIC) is properly detected, if i plug in a Lan cable I have got a connection.
I already tried this Lenovo Update tool, it installed some drivers and updates, but still no change. I already tried all Wifi drivers from lenovo homepage without success. Hitting the F9 Button didn't change a thing.
I just bought hp 14-d037tu, I am using win 7 64bit, i downloaded all the driver from the hp support site, but there is one problem with the wlan driver.
i just bought hp 14-d037tu, i am using win 7 64bit, i downloaded all the driver from the hp support site, but there is one problem with the wlan driver. here my hardware id's :
I just installed Skype, mostly to test the camera, and the green light is on but I can't see anything. Skype just shows an outline of a camera with a diagonal line though it no matter which camera option I pick.
Symptom: when trying to enroll a fingerprint, I get the message: 'Use a longer stroke when scanning your fingerprint,' the sensor light turns from green to blinking orange (3 times), then back to green. Same happens when when trying to enroll from Windows PC Setting/ Sign-in Options/ Fingerprint (Add).
What I tried: uninstalling ThinkVantage Fingerprint Software and Driver (to include selecting 'Delete the driver software for this device'), rebooting, using Lenovo System Update to re-install ThinkVantage Fingerprint Software, rebooting. Have also tried to manually install previous versions of the Fingerprint Software to no avail.
I had this similar problem in the past, since upgrading from Windows 8 to 8.1, but the steps above usually resolved it.
I have a Yoga 13 and have been avoiding the 8.1 update but was forced upon me yesterday. Media player stopped working but found the update on this site.
However all old videos now play fine but new ones taken today will not and just says 'Windows Media Player has stopped working'.
I tried plugging several devices into a USB 3.0 port on my z510 this morning to no avail. The USB 2.0 port is working(I have a mouse plugged into it and it works fine) but the USB 3 ports will not work at all. I tried looking at device manager; it says everything is working properly. Power management doesn't turn any of the ports off.
It was working fine 2 days ago. Is it possible to turn the ports off? Because nothing is being recognized.
I looked for drivers on Lenovo's site; no USB drivers for windows 8.1 at ALL. What do I do?
I have recently updated the BIOS on my E530 laptop to version 2.08 (the previously installed version was 1.xx, probably 1.37 as far as I remember, but am not sure about the exact version..). After the update the laptop keyboard and touchpad stopped working in Windows.
The keyboard does, however, work in the BIOS and both (keyboard and touchpad) work when the computer enters the Windows-startup-screen (where it suggests to fix hard drive errors etc.).
I am using Windows 8 all along and before I never had problems with my hardware. Now both the keyboard and touchpad are recognized in Window's Device manager, but are known to have troubles. There is also a PCI Device recognized in the category "Other devices", but it's missing any drivers (I wonder if there is a connection..). All those three are recognized as such by the Lenovo Solutions Center as well.
I have tried reinstalling the UltraNav drivers, but it wouldn't work. Also, I've tried finding any possible configuration regarding my problem in the BIOS, but was unsuccessful. If I attach an external mouse or keyboard, they work. I really don't know what else to do to get my laptop's keyboard & touchpad working!
The complete description of my laptop is: ThinkPad Edge E530 (3259-HLG), running Windows 8 (x64).
I have purchased E540 and I have purchased Norton Internet security but the system does not load the installation when I insert the disc. I have tried the run command as well as other options like choosing the file from the disk in the windows explorer but still my system can not load the setup!
Recently my fingerprint stopped working for power on and Windows login. Fingerprint reader setup utility started to show some strange error followed by empty utility window (see screenshots below).
Link to picture
Link to picture
I have updated all the software using "Lenovo update and drivers" but it did not work (BIOS image also was updated during this process). I doubt that it is hardware fault because I have Linux OS installed as dual boot among with Windows, and no problems there with logging in using fingerprint reader (fingerprint-gui package)...
Got my new XPS M1730 in December 2008 and all was well for the first few months till the graphic issues started and the Nvidia driver stopped working and has recovered problem.
So three new cards and after a long battle they eventually agreed to swap me out with an Alieware M17X R2.
I have two questions .....
what happens if i still have the old XPS in a box upstairs waiting to be collected and they have not collected it after 3 months and will they even want it back now...they did say they wanted it back and i would be contacted when this collection had been arranged ...
however three months have passed and im not going to phone them and ask them to come get it ....and also what can i do to get the machine back to working properly ... ie how can i find out if it definitly is the graphic card and what are my
options .... are the 9800 cards plauged with the same problems . As for the Alienware im not convinced i like it as much as i did the XPS ... fan noise during gaming is almost embarrasing ...
I have uninstalled Windows 8 and installed Windows 7 64bit Pro on my new Lenovo Ideapad u410. I managed to get all the drivers working... EXCEPT ONE: The WLAN.
Now here's what I did and what happens every time I try to install the WLAN driver:
I have downloaded the driver "WiFi Link Driver (Intel, CyberTan, Liteon) for Microsoft Windows 7 (32-bit, 64-bit)" from the page [URL] ... multiple times and tried installing it multiple times. The installation process works until the status "Search the target device in this machine" shows up. As soon as this status shows up, the installation exits without an error message or anything else. How to get it working. I can't even use this machine without WLAN.
By the way: - LAN works fine - It's not a hardware issue as the WiFi worked fine on the preinstalled Win8 - The WiFi won't even show up under Windows - I have not installed "Intel WiMax Driver for Microsoft Windows 7 (32-bit, 64-bit)" driver as I am told that this is not used. - Of course I am running the .exe as Administrator - I tried installing Win7 on UEFI before.
I have a problem changing my BIOS settings after installing win8.1 and enabling bitlocker. I wanted to reformat the partition it was on, so I wiped it with gparted and now all settings in bios are greyed out and I cannot change anything. What can I do to be able to edit my BIOS?
I also have linux installed on my computer if I could do anything from there.
The touchpad on my Inspiron 15 stopped working this morning. I have a mouse plugged in and that seems to work but I'd like to get my touchpad working again. I've tried uninstalling and reinstalling the touch pad drivers but it won't allow the driver to reinstall.
I have a user with a 68855TU. Using Windows 7 64 bit.
When running dual screens and connecting to the Terminal server with Dual screen, dragging the mouse cursor to the top of the laptop screen the image on both screens will move a couple of inches.
Solutions tried so far:
-Tried lowering resolution of the screens on the client side. Issue still happened.
-Checked the driver driver. Going through Screen Resolution -> Advanced Settings, under one of the tabs there was a check box for "auto scroll function". Tried with and without this checkmark with no change. Left it off, the way I found it.
-In the RDP software, checked the "Use all my monitors for the remote session" (It was off, but all screens seemed to be getting used). Scrolling still happened. Turned this off. Only only monitor got the connection, and no scrolling.
-Also tried changing the display config down a step in the RDP connection. Given the laptop screen size and no scrolling happened with that setup.
-Tried using only laptop screen. No Scrolling.
-Tried using only the external screen. No scrolling.
-Used the Lenovo software to check for driver updates. None found.
-Downloaded the latest driver from Lenovo. Driver from April this year. Updated the computer. Reboot. Scrolling still happens.
-Tried to install the latest Intel drivers for the video chipset. Get the message that it has not yet been approved for use by manufacturer.
After reinstalling W7 the lenovo solution center was complaining saying that the System Device Driver is not working. I saw that the SD card reader was not working neither so I assumend the missing driver was that one.
From the Lenovo page I dowloaded the driver for the Multi Card port for W7 and T420. After installing it the message dissapeared and the SD cards were recognized properly.
However, after rebooting the system, after a while, the mesage appeared again and the card reader stopped working.
I did install it again and the same happened. It was working and after two reboots stopped working.
my express cache doesn't seem to be working. i've recently had to format my laptop, ive got it all back working and installed the latest express cache software, everytime i run ECCMD.EXE -INFO from ele.exe i just keep getting the following:
Microsoft Windows [Version 6.1.7601] Copyright (c) 2009 Microsoft Corporation. All rights reserved. C:Windowssystem32>eccmd -info ExpressCache Command Version 1.3.110.0 Copyright® 2010-2013 Condusiv Technologies. Date Time: 7/7/2014 0:34:31:581 (JAMES-THINK #0)
Whenever I play games like Hearthstone in regular laptop mode everything is fine. However every time I switch to tablet, tent or stand mode, after less than a minute of playing, I get the error “"display driver stopped responding and has recovered". I even updated my Y2P to the latest Intel graphics driver and it didn’t work. I think it’s something about the tablet mode that’s making the graphics card or processor not function fully.
