Lenovo B / G Series :: G505s - OS Optimized Defaults
Jun 30, 2014
I've got a Lenovo G505s (A8 - 4GB) with Windos 8 64x.
There's an option in the BIOS called 'OS Optimized Defaults'. It has two choice, 'Win 8 64bit' and 'Other OS'. The default is in my settings is 'Other OS'.
The first one says: When load default values, will load pure UEFI mode default values.
The other one: When load dfault values, will load Lwgacy support mode default values.
So, just because I've got Win8. Am I have to use the Win8 possibility, or stay at the default one?
I bought a Lenovo G505s laptop 4-5 days ago, but I have a problem. When I start Windows, it says 'battery not detected'. I found a topic about this, and I can fix it, if do the 'battery out, AC adapter in, deleteing Microsoft ACPI-Compliant Control Method Battery from device manager, shutdown, AC adapter out, battery in, AC adapter in' method The real problem is, that I have to do this every single day I wake up. Maybe it's because I don't updated BIOS, or it's a software/hardware error?
I really don't know how to update the bios for the 505s. Where can i download the new bios update and also what are the steps that I have to take? Will the program just update everything once you press yes or will you need to go in to the bios in the start up or what?
I have had the G505S for 2 days and have been using it to play Football Manager 2014. However twice in that time it has shut down because it has overheated. When I power back on the fan kicks in and some serious heat comes out and dissipates after around 5 mins.
I have downloaded HWMonitor which reads around 90C when idling, however the AMD Overdrive programme reports around 42C when idling.
I have just installed the latest BIOS update and made the changes recommended at this link [URL] .... to reduce the processor power to 98% to stop it overclocking, but is there anything else I should be doing? Is the laptop faulty as the fan doesn't kick in and out to try and cool it down during gaming?
My G505s A10-5750m processor is underclocking and locked at 2.05ghz. I tried changing settings in Lenovo Energy Management, Catylist Control is up to date, Bios is at 3.0, Amd Overdrive doesn't change anything beside GPU for me, whenever I try to adjust processor settings, it just goes back to what it was before. Temps are are 57C, but show 100 in HW monitor which it says for everyone.
I have Lenovo G505 (59-380146) (APU Quad Core A10-5750 2.5 Ghz/ 6GB Ram) Windows 7 x64. Upgraded my HDD to SSD (Sandisk SDSSDHP256G FW:X2316RL).
System become rapid speed, windows boots in 8-10secs, HD tune transfer rate is between 357.3 and 409.6 MB/sec, simply everything just went perfect except Internet speed... With old HDD it used to be around 36-40Mbps, with SSD its now only around 11-13Mbps... My wireless card is Atheros AR956x. Drivers are up to date and downloaded from Lenovo support website. Tried old HDD - wifi works perfect.
Long story short, the battery likes to play games as to when it is or isn't detected. If I plug it in to the charger before booting it tends to recognize the battery, but frequently when simply turning on the G505s it'll just not detect the battery (I tried seeing if it was detected in the Lenovo Solution Center in addition to the battery meter; it wasn't). It runs on battery, but it's incredibly irritating to have no info as to how much of a charge is left.
I just got this laptop yesterday, and I upgraded the BIOS firmware, and am currently running Windows 8.1.
So i have the g505s a10.... A few weeks ago the unit would not boot after running awesome for several months. I have upgraded to Win8.1.
My problem is that with this newer uefi bios i am not able to view any of the files on the 505s hd with any of my other computers. I desperately need to resurect the 505 but do not want to run the one key recovery untill i can get some extremly important files first.
I have been a computer professional for quite awhile but have not worked extensively with uefi yet, Best i can tell, the only way to achieve what i am after is using another pc with uefi capabilities to access the drive.
What are my options to access the data from a 3rd party pc.
I just bought new headset for my Lenovo G505S + adapter(mic jack + audio jack in one output) but when I speak microphone on headset is not working but in-built microphone is capturing sound. I checked Smartaudio settings setted on headset option on configuration of conector and neither of theese microphone was working so I set back default.
I just purchased a G505s laptop, and I now realize that the function keys (F1-F12) operate as Lenovo hotkeys by default, and I need to press th "Fn" key along with them in order to get them to function in their original mode. This is not acceptable for my normal usage. I know with other Lenovo laptops, there is a BIOS setting that allows the user to either "disable" hotkey mode, or set them to "legacy" mode, but in the current BIOS/UEFI for the G505s there is no option to do so.
I have a Lenovo g505s laptop , and when I play games while charging(plugged in) , the frame rates for every game drop to 15-20 fps. Is there any driver update that I require?
When I connect my G505s laptop to TV via the HDMI port , the audio does not go through the TV.
I found similar topics, but nothing works [URL] ......
On CONTROL panel i select SOUND.
I do not have the HDMI Output listed under “Playback” tab, right click in the playback window and select Show Disabled Device and Show Disconnected Device. And still it didnt show the HDMI output. :/
Under Playback It shows only Speakers and Headphones. (Still after selecting Shoe disabled device and Disconnected Device). Under recording Stereomix and microphone.
What would fix this? Its my laptop missing any file/ program or driver? Or is there problem with audio card or display card?
( I download drivers from [URL] ....... so i mean its Updated).
This is terrible, by using CPUz i can see that, whilst the laptop is charging, the clock speed drops down to 900mhz and fluctautes between that and 1400mhz, this is shocking, i can hardly watch youtube videos or even post this thread, the lag and slowness is unbearable. When running on battery power the CPU speed shoots up to 2500mhz and stays there,it never seems to go to its turbo speed either. Whilst charging, the laptop is unusabe, i cannot do anything on it.
I am trying to connect my G505s to my Bose wireless speaker via Bluetooth. I am not able to find anything relating to Bluetooth in my Device Manager and no Bluetooth drivers. The Bluetooth symbol does not appear in my Windows Taskbar as I've seen it on other PCs. I am running Windows 8.1.
Things I have done so far:
- I downloaded the Atheros,Broadcom driver for Windows 8.1 (8.0.1.306/12.0.0.7850) from the Lenovo website. When I try to install it I am told that there are no valid drivers to be installed.
-I followed the instructions from Windows which said to go into Settings > Change PC Settings > PC & Devices and ensure that Bluetooth is there. Microsoft states that Bluetooth capable computers should have a Bluetooth settings page in here. I don't have one.
- From some reading online I came across instructions to run services.msc and change the Bluetooth settings in there. I followed these instructions and didn't have any luck. All of the Bluetooth listings in here state that Bluetooth is running.
- Made sure that my computer setting to locate other devices is enabled.
I'm not really sure if this computer is Bluetooth ready or not. If it isn't, I'm not sure why there are Bluetooth things "running" in services.msc though...
I recently bought a Lenovo G505s about a month ago. Everything is fine with it until i downloaded Steam and downloaded some games. 3 of the games i downloaded are shooters and therefore require the left mouse button. But when i click it to shoot, it doesn't respond sometimes and is very laggy. This is not the fault of the game as i tried it in different ones but the problem is still there. i tried to switch round the buttons (so that the right button is to shoot and the left to aim) and it works fine...
If it is needed here are some specs for the pc: AMD A8 6gb ram WIndows 8.1
Also the buttons and trackpad work completely fine with everything else except games including Minecraft. it seems that when i am moving with WASD the button doesn't work but the right click button does.
Update your Chrome browser to Version 37.0.2062.94 m and above ... It works fantastic with the Y2P and the text is so sharp now for high res laptops running Windows ...
I've just updated mine 15 minutes ago, haven't come across any bugs or usability issue.
Touching on the screen when typing still does bring up the OnScreen Keyboard ...
Oh well ... At least the text is much sharper now compared to the previous versions of browsers ... I have a Y2P (i5) ...
I installed iStat, Chrome and Safari and I noticed that Safari usually uses less cpu usage than Chrome but I can't tell for sure. When I (used to) use Chrome for pc, I never rememebered cpu usage to go as high as it did with my mbp; but the cpu in my pc was an AMD dual core @ 3.6 ghz so it's kind of hard to compare.
This kind of leads me to believe that Safari may be better for os x than Chrome but I don't know; is it?
I lost the restore partition on the original SSD that my Yoga 13 shipped with. Is there a collection of drivers and whatnot that would allow me to restore it to factory defaults on my own with a fresh windows installation? I have the win8 key from the BIOS but don't want to lose out on all the required drivers if I were to just reinstall windows myself.
if i use the recovery disk to take my old HP to factory defaults before selling it, is it still possible for someone to use those data recovery software to pull up my old info? Is it just better to use something like dban of killdisk?
I would like to restore my XPS M1530 to factory defaults. I saw on the recovery drive a file called Factory.wim Can I use that file to restore factory defaults? I would like to format the drive and start from new again if possible. Do I need the disks that were sent to me with the laptop or is all of the info on the recovery partition?
How do I refresh my HP G62? My laptop runs Win7-32bit and it was used by my son. Now that he has another laptop, I want to use his old one and I thought of refreshing the entire OS and to have the laptop as it left the factory with the defaults. Can I refresh it to Win 7 64bit or even Win 8.1?How do I do the refresh procedure with HP tools?
I decided to restore my aspire 5930g laptop to factory defaults, and started out with creating the restoration discs. At this point, i wasn't really aware that one could restore from the harddrive.
So i booted up the discs and started the restoration process. But now, the dialog tells me to insert the third disc, while i only have two. What should i do? I could try to kill the restoration process and start over from the harddrive, but im afraid to harm the system.
We have a Dell E6330 that is running Windows 7 Professional on it. we need to set this Dell back to factory defualts but do not see an option to do so. I know that it does have a recovery partition but I do not see a way to access it.
I've been trying to restore my system back to factory defaults for a while now. I've tried pressing ALT + F10 at startup, but it just beeps loudly and brings me to a command screen, saying:
[ /NOEXECUTE=OPTIN]
I've tried several 'fixes' but have had no luck, I would really appreciate somebody helping me, as it would save me in technician costs.
I applied restore defaults i saved and i reset the laptop. After that my laptop asked for password and i do not have it. My laptop is inspiron n5010. I think needs bios password, what should i do?
System: Aspire 5552, Model Pew76: I'm attempting to restore the default software using the System and Recover Software. Everything goes fine until after Running the Language disk. The installation hangs at 99%. Here's what the Restore Progress displays:
I am trying to restore a corrupted M5 to factory defaults. Since the HDD was corrupted, the Acer eRecovery would not work. I purchased the Recovery Media CD set, changed BIOS to boot from CD, disabled secure Boot.
The System Disc comes up, i selected Restore Operating System to factory default. I get prompts to insert Recovery Disc 1, and after a few seconds get a message that the is no sufficient disk space to copy temporary files.
The HDD is 500GB, C: drive is 450GB and 415GB free.
