Lenovo B / G Series :: G560 - How To Capture Screenshot Without Using Print Screen Button
Sep 8, 2014The print screen button is missing in my G560 laptop. Is there an alternate way to capture screenshot?
View 4 RepliesThe print screen button is missing in my G560 laptop. Is there an alternate way to capture screenshot?
View 4 RepliesI just fired up a new W510 laptop today and can't seem to find the print screen button.
View 4 Replies View RelatedThere isn't a print screen button on my new L520, know of any key combinations that do the job? or do you have to use the Win 7 snipping tool?
View 4 Replies View RelatedLenovo G560 - Issue with won't boot and black screen after HDD upgrade.
What happen: My laptop was working fine, no blue screen issue, no funny business at all. I bought a new SSD Intel 120 GB and thought it would be good to replace the HDD. I shutdown and disconnected the power adapter, waited a couple of minutes and removed the battery. I opened up the back case and replaced the HDD. And put all the screws back and put the battery back in.
Problem: The very first time I turned the power on, nothing happens besides a black screen. I pressed the dvd drive it works and opens up and closes. I waited for about 30 mins and still has blac screen. When I mean black screen, no bios menu, no logo, just a black screen with the fan sound on.
I have tried these:
1. Unplugged everything - battery, adapter, and pressed the power on button for about 60 seconds, nothing, the laptop turns on with the LED display on for both on and battery LED's. But nothing but black screen, no sound of windows loading just the fan and black screen.
2. I tried putting back my old 2.5" and nothing but black screen.
Today i have cleaned my lenovo G560 Keyboard with a soft napkin and medical alcohol (ethanol).
Only the touchable volume and power buttons are working ....
For the last two days or so, my Lenovo G560 laptop (running Windows 7, 64-bit, BIOS 2.10) has had problems with its (wired) network adapter after waking up from hibernation. It is shown as disconnected (same as if the cable was physically detached). The only major change I performed in the last few days was installing Service Pack 1. However, the problem only appeared about two days afterwards, so I'm not sure if this is related at all.
In such cases, IPCONFIG reports the following for the NIC:
Ethernet adapter Local Area Connection:
Media State . . . . . . . . . . . : Media disconnected
If I try IPCONFIG /RENEW, I get
Windows IP Configuration No operation can be performed on Local Area Connection while it has its media disconnected.
Hovering over the tray icon says "Not connected". Troubleshooting of course doesn't find anything. Also, there are no weird entries in Event Viewer (unless they're hidden somewhere in other views). Basically the behavior is identical to when the network cable is physically disconnected (unplugged).
Also, unplugging the network cable, waiting a few minutes, and plugging it back again doesn't do anything.
For now I have two workarounds:
-rebooting the system
-right-clicking Local Area Connection (under Network Connections), selecting DISABLE from the menu, waiting for a few moments, and then choosing the ENABLE from the context menu.
Few keys in my laptop G560 keyboard is not working. I have done system restore, uninstalled and reinstalled driver nothing worked. I fear that it is a hardware problem.
Few number keys and space bar is not working. Other keys are working fine.
While trying to install Intel Rapid Storage Technology(IRST) Driver on my Lenovo G560 Windows 7 64bit OS it is not able to install and gives me some error regarding hardware not match or etc. error then i came to know that to install AHCI driver i have to change in BIOS Sata controller mode from 'Compatible' to 'AHCI' i tried so and then restart the system but it gives BLUE SCREEN error while windows startup logo and restart again, any solution to use Rapid Storage Technology on G560 and actually this driver was installed when i purchased the new laptop but after certain format and fresh windows installation its no more able to install, how to install it back..........
View 6 Replies View RelatedI bought a Lenovo thinkpad E430 recently with Windows 8 operating system. There is no print screen button in it even with Fn key. How to get print screen.
View 2 Replies View RelatedI have VAIO CR: VGN-CR25G/R. There is something wrong with my inbuilt camera. It works perfectly fine when i use it for webcam chat on msn. However, it doesn't work (in fact, it doesn't react at all) when i press the "CAPTURE" button on my laptop keyboard. Do you know why this is the case? And how can i fix it?
I went to Device Manager > Imaging Devices > Sony Visual Communication Camera and it tells me that the "device is working properly"
Is it normal for the Fingerprint reader to flash green when the X230 is turned off? Running Win8
View 2 Replies View RelatedRecently my fingerprint stopped working for power on and Windows login. Fingerprint reader setup utility started to show some strange error followed by empty utility window (see screenshots below).
Link to picture
Link to picture
I have updated all the software using "Lenovo update and drivers" but it did not work (BIOS image also was updated during this process). I doubt that it is hardware fault because I have Linux OS installed as dual boot among with Windows, and no problems there with logging in using fingerprint reader (fingerprint-gui package)...
I'm trying to capture screen images in Windows 8 (Metro) and I've read several things saying that you can do it with (Windows Key + Print Screen) but it doesn't seem to work. I've noticed that Print Screen is on the same key as a button called Insert, so I'm wondering if that's why it doesn't work. I've tried holding shift and control to see if it makes a difference, but still can't do it.
I wish I could use the snipping tool in Metro, but it only seems to work in desktop mode. Is there a way to use the snipping tool in Metro?
I want to use F1-F12 as standard keys but I can't find any way to do so. I looked in BIOS but theres nothing useful. How do I turn off the FN button?
View 4 Replies View RelatedI bought my Lenovo Y40 on the Lenovo Web site a couple months ago and recently, to turn on, I have to press the power button twice. When I press just once, the Lenovo`s logo is displayed on the screen, but after 2 seconds everything turns off. On the second trying, finally the laptop turns on and the windows is started.
In addition, rarely the laptop stucks on the lenovo`s logo screen, being necessary to hold on the power to reset it.
where is the printscreen button on the X1 carbon ? Where is the insert botton ?
The keyboard of the X1 Carbon is non standard compliant. The person who took keyboard classes and efficient at typing becomes inhibited with these changes The End botton is close to the A key which is usually the spot for the Caps Lock
My T430s camera(Windows8) is not working now. The LED light is on when I start the camera, but no imamges show up. I checked the driver, and it's already the latest version. The camera was working at the begining when I got my laptop, but I don't know what happened to it.
View 9 Replies View RelatedI have just installed the HP 4635 printer to my network. All devices were printing yesterday wirelessly. Today the laptop device has a print job that I have requested to delete. It has said "deleting" for two days and I can not get it "unstuck". each time I send a new print job to the que it goes in line "behind" the print job that is stuck in "deleting" mode. I have tried re-starting. re-booting, ctrl, alt, delete. nothing seeings to get this print job "unstuck" and deleted.
View 3 Replies View RelatedI have a Dell Inspiron 15r and a Dell v313w I purchased in November 2010, both are wireless and connected through a gateway/router that have been very great over the years but about a year or so ago I noticed each time I would try to print out multiple documents I could only get one document to print out, it could include one sheet or many sheets . Any others documents would be stuck in the print queue listed as " printing " but would never print out unless I restarted the computer then it would print out all documents one after another just as they had been entered complete with all sheets per document accounted for and in correct order.
After the printer had finished printing all the documents if I needed to print another document I would have the same headache all over again and the document would remain in the queue until I restarted the computer again.I'm not a spring chicken by any means and have to think logically went operating the computer or installing software so many of the technical jargon is something I really don't understand.
Well after i reformat my pc the gray window that shows after you touch one of the five touch sensitive button doesn't show.same goes when you Fn+F5 which supposed to show WLAN and bluetooth card settings. What application or something i have to install for this?
View 2 Replies View RelatedI recently bought an IdeaPad Z570 and re-installed Windows 7 completely. I installed all the necessary drivers and software available on the Z570 drivers download page, including the Lenovo Energy Management Software.
The following software were not installed as I do not have any use for them:
Intel Matrix Storage Mgmt, Bluetooth, OneKey Recovery, McAfee, SRS Premium Sound
Everything is working fine except the One Key Theatre button. When I press it, nothing happens. I did some research and found out that the key should be enabled by the Energy Management Software, but it is not the case.
There were also some posts regarding a stand-alone One Key Theatre driver, but I cannot find any such thing on the Z570 drivers download page. Just to confirm, I do not have any "unknown device" in the device manager and the version of the Energy Management Software I installed is the 6.0.1.6 from 2011-03-29.
I got an X230 a few months ago and the power key has stopped working. It doesn't spring back like the other keys and pressing it has no affect. My laptop is under warenty so I plan on contacting the store I bought it in about a repair but I'm wondering is there any way for me to use the laptop in the meantime? Any way to turn the laptop on without using the power key?
View 8 Replies View Relatedthe microphone mute button doesn't work, nor does it light up at all... the speaker mute button works. Also, the Lenovo button next to it USED to work and now doesn't for some unknown reason. I have a new x1 carbon with windows 8.1 and really need some specific direction on how to troubleshoot this!
View 2 Replies View RelatedI migrated win 8.1 to the ssd on my wd black2 (128ssd + 1tb hdd). It also took the first two partitions shown. I then activated the 1tb drive and copied the next two paritions to the SSD in the same sequence and size as original drive.
Then I copied the other remaining paritions to the END of my 1tb hdd. So all partitions are there same sizes same sequences as before execpt for the hdd in the middle. See screenshot.
One key makes a backup to the 1tb hdd which is what I wanted so as to save space on the SSD. But the novo button does not work which makes it useless. How can I fix this?
I know theres lots of threads on this but this is specific to having the partitions split on the ssd and the hdd.
Drive 0 is the ssd/hdd drive 1 is the original drive ( that okr worked on) its a y510p
Link to image
Is there anyway to disable the center scroll button on the x-240 trackpad. I keep hitting it when I try to use the left mouse button. I never use the scroll button and want to get rid of it. The new trackpad's design is horrible with the undefined buttons.
View 8 Replies View RelatedI've run my Lenovo laptops (on a T510 now) for years using the middle button (the "scroll" button) as a plain old middle mouse button. The ultranav tool has always had an option to make it act like a MMB, with no fancy scroll function, etc.
I just bought a new W540, and found, much to my distress, that such an option doesn't seem to exist on the W540! This is very important to me as I run Cygwin X server and rely on the middle mouse button to to paste in Xterms and other X apps. This is a real showstopper for me!
I noticed a "three finger tap" function that's supposed to act as a MMB. But it doesn't seem to work in Cygwin X. Plus, it's not the best solution.
Is there any way to do this with the new Ultranav drivers?
From this [URL] ....
This is the Driver for T 440p
And chose the BIOS strings the
ThinkPad Setup Settings Capture/Playback Utility for Windows (SRSETUPWIN) for Windows 8.1 (32-bit, 64-bit), Windows 8 (32-bit, 64-bit), Windows 7 (32-bit, 64-bit), XP - ThinkPad
The download driver is not included.
[URL] ... are missing.
sometime in sleep mode my Yoga fall into irresponsive mode without any possibility to do anything. The power button is simply not working - pushing it for more than 30 second not change anything... Yoga red light is slowly blinking, the fn key is lighting, the fan is working, processor is heating and this follows to full drain battery.
Is any possibility to reset or reboot this "thermal brick" Yoga mode? Some computers and tablet have the hard reset button to work with such a situation - have Thinkpad Yoga similar solution (i.e. button combination invoking reset)?
I have a Lenovo Y510P, and i want to make a backup. But in the User Manual it says that i should select System Backup in the NOVO interface, but there is no such option. In This thread it says that there's a Metro shortcut, but i am with Windows 7.
EDIT: My computer DID NOT come with preinstalled windows.
We bought around 40 of these X220 I5 before xmas and now more than 20 of them have failed. The company we bought them from tried everything but they ended up switching the mainboard on the first two that failed.
We were told it was a batch issue with the serial number R9-HNXXX and now all of those are changed into T420. But today we had the same problem with serial number R9-HXXXX that was bought two weeks earlier and with different config - I7 and SSD.