Lenovo P/Y/Z Series :: Y400 - USB Ports Is Stopped Responding
Jan 22, 2015
I have an IdeaPad Y400 and just suddenly one of the USB Ports stopped responding. The hub shows up in device manager and if I connect a usb light it will receive power but I cant use it for anything else.
More Specifically it is the always-on yellow usb port on the right side of the device.
Just a few months ago I had issues with the onboard gpu and had the entire motherboard replaced (twice) for a few hundred dollars
View 3 Replies
ADVERTISEMENT
Feb 25, 2013
I'm using Lenovo Ideapad P500 for 16 months now. Windows 8.1.I've had this message saying "display driver stopped responding and has recovered" while on startup on my notification area. It's been quite a some time I have seen this messsage during startups. And, my laptop seems more slow during startup. I've tried "sfc/scannow" but the system seems fine. I did Disk cleanup and optimization regularly. No third-party software installed.
My laptop heats up. Its working fine not too hot during Morning and Evening, but heats up high during day time. I'm not using laptop cooler now, but I've ordered one. My laptop is getting old.
View 6 Replies
View Related
Nov 15, 2014
I tried plugging several devices into a USB 3.0 port on my z510 this morning to no avail. The USB 2.0 port is working(I have a mouse plugged into it and it works fine) but the USB 3 ports will not work at all. I tried looking at device manager; it says everything is working properly. Power management doesn't turn any of the ports off.
It was working fine 2 days ago. Is it possible to turn the ports off? Because nothing is being recognized.
I looked for drivers on Lenovo's site; no USB drivers for windows 8.1 at ALL. What do I do?
View 1 Replies
View Related
Oct 31, 2013
I am getting Red Led light from my audio jack and audio jack is not working, how to fix. Speakers are working fine.
View 8 Replies
View Related
Mar 24, 2014
I bought a y400 in feb 2013 and it worked perfectly. Then i faced some SSD issues and the system would hang and needed to force restart .I had to install Ubuntu to work.. I sent it back in feb'14 under warranty and they replaced motherboard ,SSD , HDD , re imaged ,etc . Now i got it back and everything seemed to be ok but was facing display driver issues (tried everything to fix this) and ended up disabling my graphic card to make the system work seamlessly .
Having read on internet somewhere that windows 8.1 may fix the dispaly driver issue , I upgraded to 8.1 from the windows store . After downloading the update I had to restart to install windows 8.1 and it was stuck at 49 % at setting up on lenovo logo screen for about 2 hrs and I had to force shutdown.
After starting up again as expected it crashed. Now I cannot Safeboot nor can I use OKR .
After the booting up its landing lenovo logo screen for a while then jumping to select language screen ENGLISH US -> Advanced Options -> cannot find startup settings (to safe boot) any option i select for example system restore it then asks me for windows 8 setup or windows 8 OS when i select any one of them it hangs (blue screen)
Same happens when i use OKR .It loads the files and then boots to the same language screen . Since Recovery image is stored on separate drive all I need to do is format the C drive but how can I do it ?
View 6 Replies
View Related
Feb 23, 2013
I have recently updated the BIOS on my E530 laptop to version 2.08 (the previously installed version was 1.xx, probably 1.37 as far as I remember, but am not sure about the exact version..). After the update the laptop keyboard and touchpad stopped working in Windows.
The keyboard does, however, work in the BIOS and both (keyboard and touchpad) work when the computer enters the Windows-startup-screen (where it suggests to fix hard drive errors etc.).
I am using Windows 8 all along and before I never had problems with my hardware. Now both the keyboard and touchpad are recognized in Window's Device manager, but are known to have troubles. There is also a PCI Device recognized in the category "Other devices", but it's missing any drivers (I wonder if there is a connection..). All those three are recognized as such by the Lenovo Solutions Center as well.
I have tried reinstalling the UltraNav drivers, but it wouldn't work. Also, I've tried finding any possible configuration regarding my problem in the BIOS, but was unsuccessful. If I attach an external mouse or keyboard, they work. I really don't know what else to do to get my laptop's keyboard & touchpad working!
The complete description of my laptop is: ThinkPad Edge E530 (3259-HLG), running Windows 8 (x64).
View 6 Replies
View Related
Jan 14, 2014
Whenever I play games like Hearthstone in regular laptop mode everything is fine. However every time I switch to tablet, tent or stand mode, after less than a minute of playing, I get the error “"display driver stopped responding and has recovered". I even updated my Y2P to the latest Intel graphics driver and it didn’t work. I think it’s something about the tablet mode that’s making the graphics card or processor not function fully.
View 5 Replies
View Related
Feb 12, 2014
I have the Lenovo Y400 laptop with Intel Core I-7 processor and Nvidia Geforce 650M Graphics chip. The laptop came with windows 8 and is now running windows 8.1 At the time of purchase I opted to go for a model with a standard HDD and no MSATA SSD for caching.
I have recently purchased a 128 GB "My Digital SSD - Bulletproof 4" MSATA SSD and installed it.
I installed the Intel Rapid Storage Technology software and it shows the drive, but does not give me any options for acceleration or caching.
Based on my research so far, it seems I need to enable RAID mode in the BIOS (SATA setting is currently at AHCI).
The only other option shown is to change it to "compatibility mode" which it identifies as IDE.
Is there a way to switch the BIOS to RAID mode so I can use my MSATA SSD for caching without having to reinstall windows?
View 1 Replies
View Related
Feb 23, 2014
I have a 3 month old X1 Carbon. Last night i turned it off and suddenly today morning, I find that the device is not powering on. What's the deal? No response at all even after continuosly pressing the power button.
View 5 Replies
View Related
Aug 16, 2014
My S210 continuously is loading thumbnails when I turn it on. Just started yesterday. How to reset it? It doesn't respond to any commands and only can shutdown or restart by going to task mgr.
View 3 Replies
View Related
Aug 1, 2013
I bought a Lenovo G580 laptop this march and now I have some problem with my keyboard. It is behaving strangley. Some keys are not responding and some keys are giving me two charecters. For example, when I press T, it writes R and 5 and the key I is not responding. I did system restore, last known good configuration, repair etc, but the problem is still there.
View 7 Replies
View Related
Nov 17, 2013
I bought my ideapad month ago and had some problems. It is gt 755m sli model.
While playing any game my screen goes weird(Picture bellow) and PC doesn't respond at all. Only way is hard restart. this problem shows only while gaming ad just a few times while watching videos on Youtube.
I tried taking SLi on and off. No difference just Fps drop while sli off but it still crashes.
Also I noticed that it doesn't crash so easily without power cable plugged in so maybe it´s something wrong with my settings.
I bought this laptop mainly for gaming so this problem gets really annoying.
Link to picture....
View 6 Replies
View Related
Jan 27, 2014
sometime in sleep mode my Yoga fall into irresponsive mode without any possibility to do anything. The power button is simply not working - pushing it for more than 30 second not change anything... Yoga red light is slowly blinking, the fn key is lighting, the fan is working, processor is heating and this follows to full drain battery.
Is any possibility to reset or reboot this "thermal brick" Yoga mode? Some computers and tablet have the hard reset button to work with such a situation - have Thinkpad Yoga similar solution (i.e. button combination invoking reset)?
View 5 Replies
View Related
Feb 19, 2009
I have had my DV5T for round about a couple of months now and I have noticed that on random occasions the nvidia display driver nvlddmkm would stop responding.
Are there any solutions for this? Any opinions on why this is happening?
I am running the latest drivers on my 9200M GS and have Vista Home Premium for my OS.
View 3 Replies
View Related
Mar 17, 2013
v3460 just puchased 2 weeks ago.Dell support software stopped responding. I had run the program the first week, using the key button. program ran fine.
Yesterday tried it, program stopped working, the program is mysteriously gone. I have tried to reinstall from the dell downloads, It will not complete without an error.Tried system restore.No luck.No restore points available for 1st week of purchase.
View 6 Replies
View Related
Dec 5, 2014
I have a new Inspiron 5547 w/Windows 7, everything is working well except for the Touchpad. Initially the touchpad was working fine, then it stopped responding, only when I attached a USB mouse could I use the laptop. I re-installed drivers and the Touchpad worked correctly again. A few days later, the trackpad stopped working again....reinstalled drivers yet again and everything worked fine. Now for the 3rd time in 4 days the trackpad is not working. Is this a hardware or Windows 7 Issue?
View 1 Replies
View Related
Jul 27, 2011
Product: HP Pavilion dv7-6015tx Entertainment Notebook PC
OS: Windows 7 32-bit
Status: Clean installed Windows 7 Ultimate 32-bit from Windows 7 Home Premium 64-bit
I have been having several instances where the computer would seem to 'lag' then after some flickering rendering on my monitor, Windows would give the error: "Display driver stopped responding and has recovered."
There are still effects after this message is displayed. When dragging windows, scrolling up and down etc. graphics continue to flicker.
This is not while hardcore gaming, the GPU was not working in high temperatures. Interestingly, I do not have this problem when I am in the midst of hardcore gaming. The CPU was not under heavy load, the CPU was not working in high temperatures either. I checked the temperature with thermal monitoring (HWiNFO32).
I have plenty of resources, 1223MB of RAM to spare. I also have plenty of HDD space too. I have installed the latest graphic driver for my product: AMD High-Definition Graphics Driver, but the problem persists.
View 9 Replies
View Related
Jan 25, 2010
I have an e6500 with an Nvidia graphics card. I'm running Win7 with all current drivers, including the latest graphics card driver.
Today, while doing nothing particularly graphics-intensive--I was just surfing the Web, writing documents--the display repeatedly flashed to black, then went back to normal...........................
View 4 Replies
View Related
Mar 11, 2010
So I got my M1530 replaced with a SXPS 1640 with a 3670 video card and I have been getting this error message frequently. The laptop freezes then a few seconds later comes back online with this error message! How do I fix this?
View 10 Replies
View Related
May 11, 2010
Has anyone seen this error on their VPC-Z series?
I've seen it twice now... it flashes up something about "188.8" or something but that vanishes quick. In Event Viewer, it says:
Display driver nvlddmkm stopped responding and has successfully recovered.
Is it bad, or just iffy drivers? It recovers instantly.
View 10 Replies
View Related
Jan 3, 2015
When I recieved my Y510p about 8 months ago, the usb ports worked perfectly fine. Around October they stopped working properly. The only solution which I found to work was doing a system restore. When I did this, an Unrecognized Device in the Device Manager was no longer unrecognized, and was instead replaced by USB xHCL (or something along those lines). However, as soon as i restared my computer again, the ports broke, and the unrecognized device reappeared. Repeating the restore followed by a restart breaks the ports every time.
View 7 Replies
View Related
Jul 30, 2013
A friend of mine just bought a Lenovo G580 (2189), It's currenlty running Windows 7 x64.
But I can't get the 2 USB 3.0 ports working. If I plug in a keyboard I get no power to the keyboard.
I have 2 unknown devices in Device Manager. I have installed all drivers matching my system.
Proud user of Lenovo T510.
View 6 Replies
View Related
May 27, 2013
I've had this laptop for about a year or two and all of sudden my two left usb 3.0 ports stop working, although when I first turn on my laptop, the left side works for about a second and then stops working. My right usb port which is the 2.0 one works just fine.
View 6 Replies
View Related
Jul 30, 2014
Recently I purchased a Lenovo IdeaPad S510p with DOS installed in it.
Then I installed Windows 7 Ultimate SP1 x64, and downloaded all Windows 7 drivers from the lenovo support website.
But the left two USB 3 ports don't detect at all. They are not working.
View 3 Replies
View Related
Jun 19, 2014
I've installed win7 64bit on my Ideapad S410p. The problem is 2 USB3.0 ports can't be used, only 1 USB2.0 that can be used. The driver was installed and nothing wrong. In order to use USB3.0, I need to plug in the device and then restart my laptop. I must do that every time plug to USB3.0.
View 4 Replies
View Related
Dec 7, 2014
I bought my Aspire E5-511G few days ago.
I installed Windows 7 professional (x64) successfully.
I installed all the drivers downloaded form the support section also successfully.
The problem is that on approximately every 5~10 minutes I get the following message:
"display driver intel hd graphics drivers for windows 8(r) stopped responding and has recovered".
This message by itself is not annoying. The problem is that during skype video call after getting this message I don't see anymore nor my own video nor the video of the called.
Not only this, restarting the call does not fix the problem.
The only solution is to restart skype but this also does not work everytime.
I had similar issue with youtube videos but I fixed the problem by setting NVIDIA as preferred graphics processor for the browser application, however I don;t have such option for skype.
View 4 Replies
View Related
Jan 26, 2015
I purchased an Aspire E5-511 about a week ago. At first, I had no problems with the USB ports and what I plugged in would be recognized and work, but now none of them will recognize anything that is plugged into them. This is for multiple devices that work on other computers, so it is not the devices, and obviously it's not the hardware if all 3 simultaneously stopped working. Googling the problem has led nowhere. Additionally, the webcam used to come up automatically in the "Camera" app; this no longer works either and it says "To get started, connect a camera." I have restored the system back to factory defaults, had all files deleted and re-did the entire initial process all over again, to no avail.
View 1 Replies
View Related
Sep 13, 2014
my Lenovo W530 Windows 7 64 bit USB's have been randomly disconnecting and connecting, the things i have plugged into them are my mouse and an external hard drive, and they just repeatedly turn off then on again? i've done some research where people have gone to their device manager then to their USB Root Hub Properties and was told to uncheck the option as show below for all the root hubs but it still does it.
View 3 Replies
View Related
Dec 19, 2014
All 4 of the usb ports on my dv8000 stopped working. Ive tried updating the drivers, no luck. It originally had XP as the operating system but it was upgraded to windows 7, i dont knows if the usb drives are corrupt or what. When i plug anything into the usb ports it does nothing.
View 4 Replies
View Related
Jun 1, 2011
I have Lenovo S10-3T convertible with touch screen. The touch screen worked perfectly with windows 8 pro but after upgrading to windows 8.1, the windows doesn't recognize my touch screen at all and I can't find (pen and touch) option in the control panel. Even in windows system information, I got (No pen or touch input is available for this display). What do I have to do to get my multi-touch screen working again on windows 8.1?
View 9 Replies
View Related
