I have just installed Windows 8 onto my T510i but I am unable to control the Bluetooth Radio. It seems to be constantly on.
If I press FN+F5 nothing happens (not even flight mode)
I have downloaded and installed all the drivers and software that I can from the Lenovo support website. Is there any thing I can do so that I can turn the Bluetooth radio on and off....
Is there a way to turn on or off the wireless/bluetooth radio when the T420 is docked and using an external keyboard? I don't want to open the lid on the T420 every time to use the Fn+F5 keys when docked.
View 2 Replies View RelatedSeveral times a week, my bluetooth mouse will freeze. I can still use the touchpad or the red dot. Fix is to Fn+F5 and stop and start the bluetooth radio. Looking in Lenovo System Update, I can see the Bluetooth driver is a recent install and is version 6.5.1.4500 for Windows 7 [32/64].
Mouse is Targus bluetooth mouse, model: AMB09US
I have a Lenovo t420s with dualboot win7 and Ubuntu. I never had any problems until now and could switch on/off my wireless and bluetooth connections via the Hardware Switch (right bottom left of the notebook) or via FN + F5.
However, without any specific reason the wireless and bluetooth was switched off and the the system tells me that I have to switch on WIFI via the Wireless Radio Switch. However, although I can move it, it doesn't make any difference for the Switch.
I tried to reset the BIOS to Default and changed the network settings, and also rebooted several times. I won't work with any of the two systems.
I have been running ubuntu on my T420s for about 2 years now. Needed a Windows box to work from home so I installed Windows 7 Home Premium - Service Pack 1 on it. Installation went smooth but Windows did not recognize my wireless card, preventing me from connecting to the internet to download and install the rest of my drivers. I tried to manually install the Intel Wireless Lan (bg, abg, abgn) for Windows (64-bit) Centrino Advanced-N 6205 which is what I thought was installed on my machine to no avail.
View 4 Replies View RelatedI have updated some months ago, my laptop 7859-5SG from Windows 7 to Windows 8 -> 8.1 and after that the bluetooth radio doesn't work anymore.
I tried to find a driver on the driver download section for my laptop, but I didn't find nothing. First problem found, is the hotkey fn+F5 that not show nothing on the display after key press, and normally with this function I can see if the radio is on or off.
I checked on the BIOS section if bluetooth is enable, and this is on. What I can do to activate bluetooth radio again?
I've got little issues with screen brightness on my T510.
Sometimes after returning from hybernate/sleep I cannot control screen brightness at all (chaning it by Fn+Home/End or from PowerManager just dont work).
I have got latest nNvidia NVS 3100M drivers.
How can I fix the volume control key on the keyboard?
(Thinkpad Lenovo T400s)
I have to press it 8 to 10 times to change the sound level...It is not very sensitive.
I have owned a T440S since late 2013.
Relevant Details:
T440S
Model : 20AQCTO1WW
OS : Windows 7 professional (original installation by Lenovo)
Latest Drivers installed as of June 2014 - including HotKey and Power Management
HotKey ver : 8.30
Power Managment : 6.65.1
Since receiving this laptop, OSD birightness control has always failed to work, i.e. does not appear on the screen when using the Fn+F5/F6 key combination nor does it control actual screen brightness AFTER FIRST resuming from sleep mode.
Sequence of steps that demonstrates the above symptom:
1. OSD brightness works fine after reboot
2. Putting the machine to sleep (I do not use hibernate) for a duration longer than a few minutes
3. Open lid the first time, hit Fn to resume machine
4. Pressing Fn+F5/F6 key combo does not display the brightness slider nor does it control brightness
5. Closing the lid and opening it again, causes OSD brightness slider to flash briefly and is now fully functional using Fn+F5/F6 keys
Your tech department should easily be able to re-create this issue on any stock T440S/Win7pro machine, as I have seen others comment about this very issue across other T440/OS variants.
I have a brand new T440 which I am populating and customising.I created a new partition on the HDD using MiniTool Partition Wizzard. That may have created the problem - I can't create the recovery media. I get a message that the files are not there. I should have done it before partitioning - too late now.
However, using the Partition Wizzard, I can assign a drive letter to the Recovery partition, and it becomes visible in Windows Explorer (File manager). I can copy the content on an external HD drive.
I have turned on full screen magnifier via Fn+Spacebar. But doing the same again does NOT turn it off. Is there a workaround?
View 5 Replies View RelatedI have a problem with my microphone mute button on my T410. It does not mute the microphone when pressed. I verified this by opening the Sound settings in Control Panel and the fact that the amber light doesn't come on to indicate it is muted. When I mute the microphone through the Control Panel Sound option, the light does not come on either.
This started happening after a reinstall of Windows. I made sure to install all the software and driver updates using the Lenovo Driver and Software update tool. I also individually downloaded and installed the Conexant drivers, too.
I recently bought a reconditioned Lenovo T410 and have to perform certain actions to get myself set up. One of these was to create factory recovery discs using Rescue and Recovery.
As this wasn't already installed on the machine, I have downloaded it (tvtvrnr4.52_005en.exe) but it won't install. I am getting the message 'Error 25014 There was an error installing the Rescue and Recovery boot manager. Return code: 6'. How to resolve it or an alternative way or creating recovery discs?
I am trying to enable Bluetooth on a 430. FN+F5 only has a radio control "i think its for wifi" Cant find anything related to Bluetooth?
Enabled BT in the BIOS. Is it possible that 430 does not have a BT?
I've been trying to get bluetooth to work on this laptop. I upgraded the latest BIOS, checked the I/O ports page for BlueTooth, and there was nothing there. I scanned hardware for changes in Windows XP, nothing is there. I installed the BlueTooth software from Lenovo, still nothing. I have Access Connections and Productivity Software installed, and I when I bring up the Access Connections via Fn+F5, there is only the 802.11 wireless radio. I did check the product quick path page for this type and model, and it seems that BlueTooth is supposed to be on this machine.
View 3 Replies View RelatedI can't adjust my screen brightness using the Power Manager. Updating to the latest release of the ThinkVantage Communications Utility did not solve the issue. I can't make the screen either brighter or dimmer.
View 3 Replies View RelatedWhen I pressed Fn-F5 previously, I had the option to enable/disable Wireless Lan, Bluetooth and Wireless Wan. However after running System Update recently, when the latest Access Connections (5.98) and BIOS (2.52) was installed, I have lost Bluetooth and Wireless Wan!
When I press Fn-F5 now, I only have the option of Wireless Lan.
I have checked the BIOS, and Wireless Lan, Bluetooth and Wireless Wan are Enabled. I have tried setting them to Disabled and then Enabled again but the problem remains.
I even did a factory reset. but I still cannot find Bluetooth and Wireless Wan.
The Wireless Wan adapter can be seen in Device Manager and Network Connections. Using "Diagnose this Connection", the suggestion is to "Turn on mobile broadband capability" & "Use the switch on the front or side of the computer, or use functions keys if available, to turn on mobile broadband capability on this computer."
The hardware wireless switch is turned on but Fn-F5 has no option for Wireless Wan.
Bluetooth is worse; the adapter cannot be found in Device Manager.
All my drivers are up to date, my mouse has new batteries, and I tried this fix:
[URL]
Now my Bluetooth mouse only works after I reboot the computer, but then disconnects after a while, and I can't even add it again to my Bluetooth devices.
I bought a ThinkPad 540p that comes with preloaded Windows 8.1. As I want to dual boot the machine I tried to select the Legacy Boot option in the BIOS/Startup tab, but I can't do anything as the option UEFI/Legacy Book is greyed out and locked in "UEFI Only". Below it there is an option called: -CSM Support that is also greyed out and selected as [No]. (below these options there is a little note with an asterisk saying "Unselectable for Secure Boot").
How can I enable the UEFI/Legacy Boot option again in order to dual boot the computer? I want to be able to boot from USB or from the CD Drive.
I just recently purchased a ThinkPad T530 (type/model# 2429-C93) which should have the following options present according to Lenovo´s product information:
i5-3320M(2.6GHz), 4GB RAM, 500GB 7200rpm HD, 15.6in 1366x768 LCD, Intel HD Graphics, Intel 802.11agn wireless, WWAN, Bluetooth, 1Gb Ethernet, UltraNav, Secure Chip, Fingerprint reader, Camera, 6c Li-Ion, Win7 Pro 64.
However, there is no Bluetooth device detected while trying to install the respective driver. Also, installation of the Integrated Camera Driver runs, but disappears at some point in time, with no error message or pop-up indicating a successful installation. Third, while trying to configure the Fingerprint sensor, the ThinkPad Fingerprint software states there is no device available.
Both camera and FP sensor are physically visible, where the green Bluetooth LED known from an R61 and T410 is missing at the lower edge of the lid.
Fn+F5 and Fn+F6 keys don´t provide an option to toggle on/off Bluetooth and camera, but only WiFi/WWAN and Audio options.
Device Manager does not show any unknown devices or such related to these functions.
Is there a chance that these options are missing in a specific laptop, despite specified for its type/model# (serial#: R9V8MNB)?
Or do I need to first activate the options in the BIOS?
I have tried to make a fresh Windows 7 installation, but after installing updates via Lenovo System Update the system gets corrupt.I replaced the hard drive on an T400 and loaded a image that I had on to the drive. After a installing a few updates and program I noticed strange system beaver. So I did a system file check and it came back that files was corrupt and cold not be repaired.So I did a new fresh Windows install. But it to became corrupt after just running Windows Update and Lenovo System Update.So I ran some hard drive and memory diagnostic without find and problems.
Then I did a new Windows 7 install again. After I installed all recommended updates from Windows Update I did a system file check, all OK. The I installed Lenovo System Update and all its recommended updates and did a new system file check, Windows system files corrupt. What Lenovo update is destroying the system?
Audio stutters when using bluetooth connection to my BOSE speaker (from Spotify). Has started lately. Cable works perfect. I use Thinkpad BLuetooth 3.0 version. Conexant 20672 Smartaudio HD.
View 6 Replies View RelatedSince updating to ThinkPad Bluetooth software 6.5.1.2700 on July 28, 2012, my ThinkPad Bluetooth mouse will stop working after using it for several hours. Disabling power management in Bluetooth does not seem to solve the problem. Please provide a download link to the prior version of ThinkPad Bluetooth software until this issue is resolved.
ThinkPad T420s [ i7-2640M CPU | 8GB RAM | 1TB SSD | Bay Battery | BT | Webcam | FR | Win7Pro64 ]
Lenovo T400 to install Windows XP on it..It previously worked fine with windows 7 and 8.1.so it boots in windows XP preinstall screen, it formats hdd and like usual installation automatically restarts after that BUT its black screen, lights and sounds show that it works and goes to next screen BUT the screen is still black. Powering down and turn on again is not showing any screen picture. Opened it removed Bios battery, turned up after few on and off it starts it reset bios.
So now there is picture and it goes on the next screen of windows instalation like normal, after installing devices and stuff it automatically restarts like usual BUT it has NO screen again, black screen, lights and sounds again show that its loading windows end instalation screen but no picture on the screen. Reset BIOS again, it starts normaly and this time it shows BSoD with code 0x7B, after BSOD Black screen again..Maybe its a BIOS setting?!? tried installing with drivers for AHCI and tried installing without drivers for Compatible , what else can it be? Updated the bios to latest version, same result. To say it again - it works fine with other windows, but XP must be installed
I have windows 8 in my T430....I just wanted to know the detailed procedure for creating the recovery for it..
View 1 Replies View RelatedI am using T440. I just upgrade the operating system from windows 7 to windows 8 using recovery disk. I upgrade according to the manual paper in the box.
The issue is, the windows 8 is installed in my HDD with capacity 500GB and the SSD 16GB are not detected. My question is, it should be installed in my 500GB HDD or the SSD drive? What are the correct steps to do recovery if I 500GB HDD and SSD drive?
I did not find any settings to have wireless on and bluetooth off when the OS starts. I always have to press Fn+F5 and switch it. How to do it?
View 2 Replies View RelatedI cannot install Windows 8.1. I have a T430. I go into the app store, start installing 8.1, it downloads, starts installing, and fails just after that point -- at 54% -- with the error message 0x80070002. That apparently means "File not found", but the Windows Update logs don't point to which file is not found, only giving:
WARNING: CSerializationHelper:: InitSerialize failed : 0x80070002
Going into Event Viewer gives the equally cryptic "English ESD Bundle Parent" as a possible cause for the failure.
SFC and chkdsk do not report anything out of the ordinary.
I have bought new T440p (20AN006NUS). Everywhere was written that it comes with preinstalled Windows 7 pro and also includes Windows 8 pro license.
As I understand license key for Windows 8 is embeded in BIOS. But I have not any installation media for Windows 8 included in the box with laptop. How upgrade to Windows 8 should look like?
Is there a small/free application for download (preferably one that doesn't require going through installation process) that shows how each Windows applications accesses the internet, transfer rates and amounts of data being transferred?
View 1 Replies View Related