the brightness keeps resetting after a period of time, I set it all the way to the lowest because the room I work in is very dim, then after a few minutes the brightness keeps resetting to a brighter setting
View 7 RepliesI've done a search and couldn't find anything relevant.
My FZ of 28 months old has suddenly started making a faint buzzing noise from the screen.
At first I thought it was the fan, but I realized it's the LCD. I can't change the brightness for some reason using Windows 7 but it's on Max Bright. I've seen some threads of people having this problem on lowered brightness levels but this is happening on full.
When I shut the lid, the buzzing stops. It can be heard if I stand behind the laptop or place my ear beside either rear corner of the laptop.
I just got a z11 and will be returning my macbook pro soon.
The only thing that is making me hesitant is the screen brightness of the z. With the plug in and full brightness, it's not that bright, at least NO WHERE NEAR as bright as the macbook pro with high res anti-glare. Is this normal?
How many of you Z owners find the screen brightness too low? Even at full, it feels dim.
I recently upgraded by Windows Vista 32bit business VaioZ690C Laptop to windows 7 professional. So far, everything has worked out great, but I have a couple questions:
1) How do I get my brightness keys to work? I cannot increase / decrease it
2) When I installed Windows 7, many of the Windows Vista drivers rolled right onto Windows 7, and would absolutely perfectly, do I still need to uninstall them all and install the "windows 7 version" or is this fine.
extra info:
*running R3054M3 bios ("I THINK")*
*running v.5 of vaio event service(i think something like that*
This is almost a classic problem. I just installed XP SP3 on a Vaio G11. I did everything according to Sony's plan. But the brightness keys don't work.
Is there a chance that Sony's drivers were written for XP SP2, and that SP3 is the cause of my problems?
Reason I'm thinking this is that SP3 recognized some devices that SP2 doesn't recognize
received the new Z 7 days ago, great is just a great little notebook, the best i had (coming from an SZ premium).
The only thing that is killing me is the auto brightness, the resolution is the 1920x and in dim light the brightness is going down, after 1 hour my eyes are red. The only thing that i can do is putting the lamp directly on top of the keyboard so the sensor adjusts the brightness to the maximum level.
What can i do? I can't find a way to turn down the auto brightness....
I just installed Win7, sticking as much as possible to this method:
VAIO FW Clean Windows 7 Install Guide
everything's working, all FN keys, volume multimedia zoom LCD out,
all but brightness.
problem is, using the FN keys, the brightness dialog is showing, but I can't increase or decrease it. brightness does not show up on power managment nor on mobilty center. the power plans from vaio ("VAIO optimized") are showing, but still if I pull the plug screen stays on maximum brightness...
I deleted a bunch of programs that I didn't know what they were.. i think i deleted something important because I cant adjust the brightness on my laptop anymore.. either with the brightness buttons or manually.. is there a driver or seomthing I can download again to gain this function back?
I have a Sony Vaio VGN-FE550G
just can't seem to get my Brightness controls to work in speed mode in windows 7.
I've tried 169.09, 180.70 and the most recent forceware drivers.
I've installed the registry file that was recommended in one thread.
I've tried all kinds of orders. Still, nothing.
I've currently installed (in this order)
SPEF
SonyPI
Shared Library
SonyUtils DLL
Event Service
The Registry Patch
NVIDIA Drivers
They work fine in STAMINA, but not in SPEED. I can't even access them through Windows Mobility Center or Power Options. I can change them a very small amount though the NVIDIA control panel through the "adjust color settings" tab. Otherwise, theres no mobility options in the NVIDIA panel.
One of the most troublesome consequences of downgrading your VAIO to Windows XP is not being able to adjust the screen brightness using the F5/F6 keys.
This tutorial aims to (i) resolve that issue, and (ii) retain the ability to adjust brightness when you update to the latest LaptopVideo2Go drivers. The below methods have been tested on VAIO FZ, FW, and NS laptops with NVIDIA GeForce 8X00M cards, and they are working flawlessly with the LV2G 190.15 driver.
Part 1: Enabling Fn Brightness Control
Skip this step if your brightness control is already working
In order to be able to use the brightness control on a XP-Downgraded machine, you need:
1. VAIO Event Service Hotfix (Which updates the VESConfig.ini file for the VAIO Event Service)
-> You can get this at[url].
-> If you have an FZ, you can use the VESConfig.ini I have attached
2. NVIDIA Driver with Customised nv4_disp.inf (Refer to Part 2)............
I've just installed Windows 7 Ultimate 64bit on my Vaio Z11MNB. As Google told me there is a problem with the FN + F5/F6 brightness adjust in speed mode.
All Sony software ist installed correctly and in the newest version I found.
As in many threads mentioned I followed the right order. But I still cannot adjust the brightness in speed mode
This thread Problem with Vaio Z Windows 7 brightness lead me to the right graphic drivers I thougt... Okay these drivers[url] are for the ZD790 but this shouldn't matter it's the same 9300GS chipset...
The following sony software is installed:
SETTING_UTILITY_SERIES_5.1_5.1.0.11200
SFEP_DRIVER_SONY_8.0_10Q1_O_7_8.0.1.1
SPIC_DRIVER_8.0_09Q3_7_8.0.1.1
SONY_SHARED_LIBRARY_5.5_5.5.0.10160
VAIO_CONTROL_CENTER_4.1_4.1.0.10160
VAIO_EVENT_SERVICE_5.1FH_5.1.0.12010
VAIO_POWER_MANAGEMENT_5.0_5.0.0.11300
VAIO_SMART_NETWORK_3.1_3.1.0.11250
Another smaller problem: From time to time there is a yellow exclamation mark at the SD-Hostcontroller in the device manager. I've googled a lot but there seems to be no other driver than the windows included. VEN_1180&DEV_0822
ive installed win7-32bit on my vaio sz650. everything works fine while connected to the power supply. but in battery mode my graphic driver keeps resetting sometimes, (and crashing the system).
this failure occurs mostly while watching video files or surfing on interactive websites.
sth like that ...
ive tried using the different graphic-modes (speed/stamina) but the failure still occures in both modes. so i guess its not a problem with the drivers.
Trying to get rid of these questionably useful programs -- but I don't see entries for them in add/remove programs in the control panel (or for any of the other useless VAIO software packages that come on OEM machines sans "fresh start")
View 5 Replies View RelatedI have an aspire 7720 laptop and need your help in setting everything to default. Is there one place I can go and reset everything at once? Would you guys be so kind to give me a hand?
View 6 Replies View RelatedI've got my 7900GS flashed so I can change the Clockrate, but the drivers I'm using I guess are causing my ATI tool to reset the clock settings I put.
I used: This site to flash
I set the slide and hit "set clock" it just resets to 375/507.
I'm guessing it's the drivers. I had some drivers that would let me do just the memory, but I'm looking to get both memory and core. What do you think it is?
I feel like somehow it isn't flashed anymore. Not sure, I know I flashed it, but I can't get it to respond to overclocking at all.
Computer Info:
OS: Vista
Video Card: 7900GS
Is there any way to do this short of taking the whole laptop apart to pull the cmos battery?
View 3 Replies View RelatedDoes anyone know how to reset the bios on the XPS Studio 1640?
I can't seem to find the required jumpers. I've tried to only remove the CMOS battery for a while but that didn't work
I'm having two issues which may or may not be related. My display adapter keeps resetting itself. Sometimes it works and I can continue working.other times I get a screen full of vertical lines and have to reboot. The computer will also not bout or run on battery power. If it's on and I unplug the a.c. adapter it well shut off. How to solve my envy dv7 issues? It's windows 8 that I'm currently running after doing a complete restore yesterday in the hope that if would solve the problem. If didn't.
View 6 Replies View RelatedMy hp pavilion touchsmart 14 sleekbook was acting funny so I decided it was time to reset it back to factory settings. I didn't realize it would take so long. I use my computer for work and I've got about 30 minutes before I have to leave. Is it safe to unplug the computer while in reset mode? The drive to work is ~40 minutes then it'll be put back on power.
View 2 Replies View RelatedI'm almost done, but I'm very stuck on the brightness key..
I have install most of the Vaio things using the guide from Z-series Clean install
I just tried out the Windows 7 beta on my SR 220J/B and everything seems to work great except for the Fn+F5/F6 brightness controls.
Win7 seemed to work well out of the box, and I've installed the Alps and Synaptics drivers, along with the Upek fingerprint software (btw, I can't log in to Windows using my fingerprint, even though the log-in screen has the fingerprint icon...). I also installed "Vaio Event Service 2 (4.2.1.12090) -- All OS" from the Drivers & Software post, and the volume/mute Fn key controls work, but not the brightness.
How can I get Fn+F5/F6 to work?
I have upgraded to W7 pro, ran the companion DVD and everything is good except the FN brightness key (also changing brightness in W7 itself) they don't work.
I have been to the sonystyle.ca website and down loaded apparently the correct utility settings driver 5.0.0.07280 for W7 Pro 32-bit (at least it says on the website its compatable) and when I try to run it, it says it's for Vista only.
[url]
I did the nvflash 79XXXXX.rom command and it asked me if I wanted to accept, I pressed "y" for yes, and it said it was successful.
So I load up windows and install coolbits and atitool, I got a steady clock at 640/1250, obviously I didnt want to keep it that high, but I benched with it and it did great, +2000 points on my 3dmark05 score. 8500!
I then changed the clocks to 450/1100 which is where I was going to keep it for everyday use, I clicked apply and went back in to verify and they were still there.
I reset my laptop and came back online the clocks were set to default.
What did I do wrong? on the newer nvidia control console it doesnt have the "apply settings upon startup" option.
i am using the 169.04 drivers so these drivers are correct(I read the newer ones do not allow the overclocking).
i've currently got the back off my laptop and can't realy see the CMOS battery or anything to reset it such as jumpers, the closest I can see is a yellow thing under some casing I cant get to, can anyone supply me with some information with how to reset it on this chassis? i'm not going to have to take the front (keyboard etc) off am I?
View 6 Replies View Relatednotebook- Acer Aspire 2000 series CL32
problem- resetting itself constantly!
Explanation- Basically, one day after normal operation of my computer, I turned it off properly. The next time i went to turn it on, it comes up with the normal BLUE screen which has "acer aspire" on it. Down the bottom it says f2 to boot or something and f12 to enter setup menu.
If i do not press anything, it goes to a black screen and attempts to locate a boot cd. After it does not find one, it goes black, then up comes the BLUE screen which says "acer aspire" on it. If i do not press anything or touch anything, this process will keep going and going until i turn it off by holding down the on/off power button.
Resolution / what i have attempted to do-I CAN enter setup menu, by pressing f12 on the blue acer aspire screen. Once i am in the setup menu, i attempt to exit. I have attempted to exit the setup menu in all way, incl. disgarding changes, saving changes etc etc.
Each time i try to exit the menu a different way, It just goes to a black screen for a few moments, then repeats the process of going back to the blue acer aspire screen.
I have attempted to insert a boot cd. So after the blue screen, it goes to the black screen and attempts to find the boot cd. After locating it, it verifies it, says something like "found in drive C" or something similar, then it goes back to the same process.
Question- How the hell can I use my computer again?
Further note- 80% of my data has been saved on an external hard disk so rebooting or any other process is fine by me, I just want to be able to use my computer again.
Before attempting all the above processes, I disconnected everything from my computer e.g. all usb devices. I have tried it on batteries and with the power cable.
I upgraded from Vista to Windows 7 on my SZ5. Was surprised at how much works out of the box (fingerprint sensor, drivers etc) but the one glaring bug I found is that when I close the lid and the monitor shuts off, when I reopen it the brightness controls (FN+F5 and FN+F6) no longer work.
I also notice that the brightness controls in Windows' power options Control Panel disappears.
I need to restart my computer to resolve this (similar problems by other users: Sony Vaio SZ1XP - Windows 7 RC ). Does anyone have a solution? Thanks!
I just installed a fresh copy of Windows 7 on my Sony VPCF115FM laptop, and I was wondering what I need to install to get the brightness control to work. I already tried the video drivers, shared library, and notebook utilities from this site:
[url]
But nothing seems to affect the brightness, even though I do see the brightness bar now when I press the appropriate keys.
I did a clean install of Windows 7. I did not load all that crap from the 2nd CD.I am trying to determine which Drivers I need to install.
I installed the VAIO® Event Service and Sony® Shared Library.
What is strange is, when I click on the FN button and press the increase brightness key, the brightness meter does appear on the screen, but it will not go above the lowest setting.
i am using my TT in the dark, once i turn the lights off in my room, the screen becomes dim. So it kinda makes it hard to see the keyboard. So i have to turn the lights on so i can see it clearly, how can i prevent this?
I have checked the power plan and i have all of them set up to maximum brightness. I just want the screen to remain as bright as it does when the lights are on. It was dim when i purchased my TT a few months back. Then i did a restore and it was cool. Then i did another restore and it went back to being dim. This was even though the restores when done were the exact same to a tee. I didn't mess with any settings.
As of 3 days ago I deleted the Sony Event Service from my Vaio FW and now the volume indicator doesn't show up nor does it work when I press the function button along with F5 or F6 for brightness.
I installed the Event Service again and I am thoroughly stumped.
Fixed it myself XD