I need to change bios from R0092N0 to R0112N0. I'm trying to use the bios update from sony website for vgn sz 430 but I'm getting an error that the program is not for my laptop model (vgn sz280p).
I've seen posts stating that this bios should be compatible. So how do you guys update this bios to use a different one? WHat program do you use to extract the bios in the sony bios update program? I need to change to R0112N0 so i can try to enable virtualization in bios, but so far i don't see any for my current bios.
I had recently upgraded my RAM (laptop in sig.) from 2GB to 4GB. Now, once in a while when I boot up, a POST BIOS "Error 0232: Extended RAM failed at address line 21" error message is displayed. I can then either boot normally or enter the BIOS setup and the OS (Win 7 64-bit) is working normally and recognizes all 4GB of RAM. I dual boot with Vista 32-bit, which uses 3GB of RAM.
I did the Windows Memory diagnostic upon boot up and it didn't find any error with the memory. I searched online without any conclusive solution.
I downloaded all win 7 drivers, and I'm ready for a clean install of Windows 7 Ultimate 64b on my Vaio. I wonder whether it would be wise to first install the bios upgrade for Win 7, version R4041M3, before I start the OS installation?
With all the hand wringing folks have been doing about the lack of drivers for a clean install of Win7 I thought I'd jump in to the deep end of the pool with my FZ190 and investigate an alternative. My good friends Rajesh and Dr. Pratik have done clean installs of Win7 on FZ models, but I decided to take a different approach... the "dreaded" OS in place upgrade. Partly out of curiosity, I wanted to see if it would work, but mainly because I have a ton of software that would need to be reinstalled, if I did a clean install. That would mean days or weeks of inventorying every thing I have installed, digging up installation media and then installing all the stuff. I just don't have the spare time. So...
This past weekend I imaged my C: drive (all my data and I mean ALL my data is on D:, I am a fanatic about that). MAKE SURE YOU HAVE A BACKUP OF YOUR C: DRIVE BEFORE YOU TRY AN UPGRADE! I ran the Windows 7 Update adviser and it said I had some issues:
Quote:
NVIDIA GeForce 8400M GT - NVIDIA Not compatible The driver installed for this device is not compatible with Windows 7....................
I just look at acer support and is listed that last BIOS version for my Acer (4736 ) is 2.06 (Dec 14th) and mine is 2.03 (Oct 27th). Someone has already tried this upgrade?
Updated: Found a better way to backup Bios only, Please see the end of this message
Let say your Vaio Z is using Bios R4040M3 and you move to Bios R4041M3 to use the official VT support. Later on, you want to move back to R4040M3 to use the Advance Menu hack. Unfortunately, you cannot move back as Sony never publish the R4040M3 Bios update. This is my current situation.
I decided to investigate a way to back up the current Bios. Using a program called Universal extractor, I managed to extracted the files in the original Bios update. The bios update uses a program called Insydeflash to flash the Bios. The Insydeflash uses a file called platform.ini to control its setting.
In the platform.ini file, there is a section called [FDFile]. The section [FDFile] has a parameter called BackupName. If we put in a file name here, the Insydeflash should save your current Bios into that file. Unfortunately, I cannot make it work with the Sony supplied Insydeflash. (version 3.38).
I managed to get the newer version of Insydeflash (version 3.72). The newer version has a new ini section called [BackupROM], as the following:
Do not upgrade... the upgrade killed my motherboard, I dont know what happened. I as installing it fine then it was totally unresponsive and would not shut off. I then had to take away the power supply and now Dell is coming to replace my motherboard.
So I tried updating my BIOS to version A14, the current one on Dell's site. Running Windows 7 Ultimate 64, btw. It seemed to update fine, but when it restarted, I got a black screen.
I waited about 20 minutes, powered off, then back on. It booted into Windows, now however my keyboard does not work. Most keys do not work, and the ones that do produce incorrect characters.
Also, whenever I restart Windows, it does not reboot. It will hang at a black screen until I power off and back on. Currently typing this on a USB keyboard.
When I go into setup, it does say version A14, so I'm assuming it went through, but for some reason is not compatible with my system. Can I downgrade to fix this, and if so, where can I find an older BIOS version?
I have a problem with the bios upgrade on my Aspire 5920G.
I have downloaded from Acer's site the 3813 version and i try to use it with winphlash, the program that is in the folder when i unzip.
I have always an error message, the one in the printscreen.
Yes, i have opened the program with administrator privileges, the same message pops out. I think that the problem is that i have Windows 7 Ultimate x64.
I am looking for advice on upgrading my BIOS from v0.3204 to v3238. Current Laptop Setup:
Original BIOS v0.3204
Acer 6930G - T6400, 4GB DDR2 and 9600MGT 1GB Graphics GPU. Plus the usual Hidden Acer Recovery Partitions.
I am currently using VISTA SP2 32bit but I plan to soon install Windows 7 64bit FULL CLEAN INSTALL.
The global acer website currently doesn't list my current BIOS (v0.3204) but does list a new BIOS of v3238 released NOV 2009.
Questions:
1. Is my laptop compatible with BIOS v3238 ? 2. Is it worth upgrading the BIOS to v3238 ? 3. Is BIOS v3238 needed for Windows 7 - 64bit to run better 4. Will VISTA SP2 still work with BIOS v3238
Additionally, if you look in the acer Bios zip file there is also a DOS folder containing the file zk2_3238.exe (eg DOSzk2_3238.exe).
5. Is it therefore best to create a DOS Boot USB DISK and Flash the Bios using the DOS EXE given above (since I have heard bad things about windows flash)? 6. And finally, once the new Bios v3238 has been flashed/upgraded, do you need to do anything else for the Laptop to function as an Acer Laptop (eg will it recognise everything)?
i have bios 1.27 and want to install the latest but am a bit worried about bricking the thing, my fan never seems to be off anymore and the indle temp is between 46 & 51 degrees is this normal for this model. Can i use a memory stick to flash the bios from dos ? cos a dont want to use windows killed my old hp laptop flashing in windows. Anyone have a safe cant fail method of upgrading this bios.
im having a problem with my laptop and HP/Compaq techs cant fix it unless if i send it to them which is going to take along time and i use my laptop heavily
my current bios is F32 system Board ID is 3612 , and there is no way to upgrade the bios to newer versions through windows or through the Win+B on power recovery.
on windows i can only apply F32 using insydeFlash , if i tried a new bios version it gives me "verify error" and trying the latest couple i guess they are F50 and F52 using isydeFlash , when ever it starts , the insyde flash program window disaprears and the system hangs for ever " taking the battery and the Adapter power will shut it off"
using the Win+B recovery on power , i tired all the versions availbe on compaq website , the same issue , it starts beeping slowly then faster and faster then shuts down i turn on the machine get into bios , its still F32.
Recently upgraded my Dell XPS 13 L321X BIOS to ver 8. Since then, whenever I close the lid and put the laptop to sleep for several hours, the processor seems to come and the bottom frame is very hot. When the lid is opened the screen remains blank and doesn't wake from sleep mode. The only recourse is to do a hard shutdown with the power button and then restart. The laptop then reboots to the black trouble shooting screen, or select the normal windows boot. I've since tried to update all the drivers, but still no luck. It continues to run hot and refuses to start after placing the laptop in the sleep mode.
I am trying to upgrade to windows 7 with the free windows 7 upgrade kit I have both Cds and i put in the home premium windows 7 cd it starts up and tells me "run-time error 70' permission denied"
my laptop is Fw490jeb
I have noticed that when I try to run "model.txt" it does not show up and when I go to system it does not detect my processer and other things...
I have a Aispire 5315. I would like to upgrade my bios in DOS to 1.33 before I install a T9300 CPU. The size of the 1.33 bios is 148,000 bytes so I can't put it on a floppy and the zip files is also bigger than 1457664 bytes.
I prefer not to upgrade in Windows although I see many using winflash. Where is this file located.
The SW on my bios is A06. I downloaded the A13 ( the windows executable ) and ran it as admin. A windows poped up warning that the pc would reboot after completion. I click on Flash, a CLI poped up, done a few things and showed a success message. But when I go into the BIOS, it's still ver A06. By the way my os is Win 7 x64 ....
I have an ACER Aspire 5520, (model ICW50) with AMD Turion TK55. I tried to upgrade it with the BIOS available under the model's specified page in ACER site, version 1.33 (IC50133.WPH).
Unfortunately I was naive enough to try flash32.exe, which is the windows base version of the flashing program; now I have a dead BIOS. Windows froze completely, I had to unplug and disconnect battery to have it down, and it never came up.
Then I did a lot of research and I found and browsed hundreds of pages about Crisis Recovery Mode (CRM). From all I read there are some misconceptions I want to get past:
1 - Deal with different CRM versions, which get accessed by Fn+B, or Winkey+B; on my case I have found that CRM gets accessed with Fn+Esc. I know it, because instead of powering up and then dying in 3 or 4 seconds on an eternal loop, when I press and hold Fn+Esc and then I connect the power adapter (with battery disconnected), I get a quick orange flash under the power button. So, when I press the power button the computer keeps running, fan is running, and it is checking HD and CD-ROM drives.
2 - There is a lot of myth about the way one has to press and hold Fn+Esc. You just have to press it before you connect the power cable. As long as you get the quick orange flash under the power button, you know the PC is in CRM. I have done all the fancy combinations of holding those keys down, but it all ends up in the same. By the way, even if you connect the battery, instead of the power adapter, once you are holding Fn+Esc it gives the same result: orange flash, you are in CRM. Of course you do not want to flash it using the battery, that's why the emphasis on connecting the power adaptor instead.
3 - Most of the info I found about this matter then turns to building the Crisis Recovery Disk (a floppy) or a CR pendrive. It does not solve my problem because when in CRM, the computer completely ignores the USB ports, the 4 of them, I tried one by one, be it with 2 different kinds of USB floppy drives, or pendrives duly formatted in FAT. There is no blinking of light on either. There is no attempt at all to access any of the USB ports......................
Today I received my Gateway EC1435u (Acer 1410-2285 clone) and it's VERY nice but it's too bad the screen is so darn reflective.
Anyways, two quick questions:
1) Are there any BIOS updates available? Acer shows a bunch but Gateway's site doesn't list any.
2) Can I delete the first OEM reserved partition? I'd like to install Windows 7 from scratch because I don't need all the bloatware that Gateway installed
I need to make a BIOS upgrade on my Sleekbook 14-b017cl. The laptop is downgraded to win7, originally win8 was installed. Is it safe to run the update in win7?
The available updates are officially for win8 only (see: [URL] ...)
Recently my hard drive started to fail. I purchased a new drive, installed a Windows 7 ISO onto a flash drive, installed it etc. I have an HP G60-237NR. I was reinstalling everything, and then I went to the drivers page for my laptop. I started installing stuff, by that time I was bored so I was going sort of from the bottom up if that order matters, I can give more details on that if I need to. I downloaded the BIOS update, since I thought "Okay, it listed it for my computer, I probably do need to update it since my laptop's like 6 years old".
Flashed the BIOS, my computer shut down, and then didn't restart like I thought it was supposed to.I turned it on and got " 104- Unsupported wireless network device detected. System halted. Remove device and restart." I tried to look up what to do, what I found said remove the network card, downgrade bios, plug it back in and you're good. Well I unplugged my network card and the two snap on wires that attached it, did all the stuff, and restarted it. I got the same error.
I meant to say I plugged my network card back in, but still got the error. In case I had gotten the snaps on wrong, I switched the snaps and double checked the card connections, but still nothing. Everything I found said that should have worked, I'm on the same BIOS version I started with but it won't recognize my network adapter.
I have a CQ61-310SV with the F.07 BIOS revision. On the BIOS downloads section here I can see the fixes for the F.15 revision. Where can I read about the changes in the versions inbetween? (F.08-F.14)
After I updated the BIOS to A09 of the Inspirion 7520 my USB keyboard stop working. All drivers is instaled and the windows recognize the keyboard and the num pad is on its happens with 2 keyboards and change the USB port don't works.
