I have a CQ61-310SV with the F.07 BIOS revision. On the BIOS downloads section here I can see the fixes for the F.15 revision. Where can I read about the changes in the versions inbetween? (F.08-F.14)
View 2 Repliesjust wondering about doing a CPU upgrade on the above laptop, the current CPU is an AMD Sempron M100. I'm not to up on my AMD cpu's so not sure what the best upgrade would be. Also, what does the bios support, as there are many CPU's that will fit the S1 socket, but I guess not all will be supported in the bios, so does anyone have any knowledge on this.
View 3 Replies View RelatedActually on Presario CQ61-110SLI I have XP installed instead the original Vista. Now I want upgrade to Windows 7 and contestually mount a new SSD Samsung 840 EVO instead the original... what is the right procedure?...
View 3 Replies View RelatedCustomer's laptop has a long-ago-forgotten BIOS password, and I'd like to update it.  It spits out "System Disable" key:  68322309.
View 3 Replies View RelatedI have an COMPAQ PRESARIO CQ61 and suddenly is asking me for the admin bios passwordAfter 3 failure trials, it shows a code "76317137".
View 5 Replies View RelatedI have a Compaq Presario CQ61 Product: VM9496Q2X Model: CQ61-319WM, that has a black screen when I power up. Â The wifi button stays red and the caps lock flashes twice. Â I believe this indicates a BIOS corruption failure. Â I have tried resetting by unplugging and removing the battery, and holding the power button for 30 seconds. Â I have tried the f8 key and the esc repeatedly at power up. I have also tried pressing the windows and B key along with the power key but nothing worked. Â
View 2 Replies View RelatedI have a HP 6530b laptop, and after I upgraded my BIOS to the latest version F.13,
I found my embedded Broadcom Netlink Gigabit Ethernet is missing,and the MAC address in BIOS has changed to 1F2021222324,
I had tried some tools to write the correct MAC address back,but all of them didn't work.
I download the HP Tattoo Utilities,but I can't unzip it without password.
If anyone who have the password for these files.
Well returned my E6400 today went quite smoothly. The system was great with the exception of sending it with the wrong display a CCFL not the LED WXGA as in the outlet Details and Order Confirmation.
I been looking in the Outlet several times daily since Tuesday for a suitable placement, Tonight I scored one similar specs as the one I sent back , now I’m thinking ” see persistence and patience pays off”.
Check the specs one more time everything looks good, click checkout and confirm. Soon I browse my email Order confirmed WXGA LED click on the hyperlinked Order Number for a detailed view of components installed ……Lo and behold CCFL !!!!!!!
I immediately contacted Dell and explained the problem and cancelled my order, the agent told me to stay on the phone as she would transfer me to a sales rep who then will make sure I’ll get a LED display on a comparable spec’ed machine. 30 minutes later the sale agent answered and questioned what system listed in the Outlet would I be interested in.
I explained I was told she would work that out for me and find something similar to my past orders but with an actual LED display, she then said all she had was what was listed and further stated that one cannot go by order confirmation of what the system specs were
This is the config, per the packing list:
Studio XPS 16 Notebook
Intel CoreTM i7-820QM
8GB, DDR3, 1333MHz 2 Dimm
16.0 inch Wide Screen 16:9 1080p Full HD RGBLED LCD w/2.0 MP, XPS 1645
ATI Mobility RADEON HD 4670 1GB
256GB Dell High Performance Solid State Hard Drive 2.5MM
Merlot Red High Gloss Finish with Leather XPS 1645
Genuine Windows 7 Professional, 64bit, English
Integrated 10/100 Network Card
8X DVD+/-RW Slot Load Drive (Dell mistake, BluRay was ordered, its enroute)
Creative SoundBlaster X-Fi MB
Intel WiFi Link 5300 802.11AGN Half Mini Card
9-cell Battery
Programs and Features:
Device Manager:
Disk Management:
Autoruns:
Running Processes (All 80 of them!!):
(Windows) Startup items:
Control Panel:
System Tray:
Windows Experience Index:
Startup time (From power-on to logon, no peripherals attached, power connected):
28.0 seconds
ATTO Disk Benchmark:
(Transfer size 0.5 to 8192 KB, Total length: 256MB, Direct I/O enabled, Overlapped I/O, Queue Depth: 4)
CrystalMark DiskMark:
CrystalMark Mark2004R3:
on OS X is there any way to see some details on a file by hovering your cursor over it? Ex: If I hover my mouse on a JPG on my desktop I can see the dimensions (like 1920x1200) and the filesize (like 2.3MB). Is there any way to enable this on my Macbook Pro?
View 5 Replies View RelatedI am new to having a thinkpad and I know that my system has a the intigrated graphics and the discrete nvidia nvs 3100m Optimus card. Here is the issue though. Â I have been trying to run some programs that are more video oriented (gaming). I discovered that my system is only reading the intigrated graphics and doesn't even acknowledge that the nvidia card is there. Â
I have updated to the latest drivers and checked the Bios to make sure things are there. Â Sadly they are not. Â I looked at the bios, followed the directions I found on the forum to set that to card to on only to find that the the only card it recognizes is the intigrated graphics. Â So the question is, how do I get the bios and the computer in general to recognize the nvidia card on my T410 (2522)?
After you get passed the bios password, I received an error telling me that there was a corrupt or missing file. These mini notebooks don't have a CD-ROM. What are my options? These were bought at an auction so we don't have the original CD to reload them.
View 1 Replies View RelatedIt seems like there are a bunch of people who are getting a system exchange, but have been waiting over a month to receive the system. Please post your system exchange details and any estimates given by Dell support here so we can get a better idea of how long this takes during this time of the year....
View 10 Replies View RelatedI play a video game, and my fps will go from 70-80fps, then just SPIKE to like 2fps and I will get artifacts.. I figured it was a display driver, I've tried probably 20-30 of them now (just random vista 32 bit drivers), all with the same results. When I monitor my task manager I'm using 100% of my CPU Usage, and around 1gig of ram while a game is running. I am trying to figure out 1) what the deal is and 2) how to resolve it...
Here are my specs:
Dell
Inspirion 9400
Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz 2.00GHz
2046MB RAM
Vista 32-bit Operating System
NVIDIA Geforce Go 7900 GS
I am currently working on a ThinkPad Edge 15 0302-2BU for a client of mine. The system is able to POST and I can enter the BIOS but the UUID is all zeros and the Machine Type Model, System-unit serial number, and System board serial number are all blank.
Â
I went to the support page for this model and downloaded the ISO file with bootable BIOS update utility for BIOS ver. 2.20 (82ET80WW) I updated the BIOS in case there were any issues with the current BIOS release. Rebooted then went to update the model number off the bootable utility. I entered the model number, Updated, and Rebooted again. Still having the same issue. The model number didn’t record after I punched it in.
Â
I am still able to POST and get into the BIOS configuration. The system will not load an OS or boot off a CD into something like Windows PE.
I'm not sure if Windows not being able to load is due to the BIOS or not but I'm inclined to think so since I have trouble booting off CD.
I spent a few hours working with Riva Tuner and drivers and I am now able to see all of the shader info.
If you also want to do this, download the 169.39 drivers for the Quadro 3700 Desktop model, then hack the inf file to include 061c (3700 is 061a) and install the drivers. In Riva Tuner go into the Power Users Settings and set ForceVGADeviceID to 193 (8800 gtx I think) in Vista or 401 (8600GT) in XP. This will allow you to unlock the Low Level System Settings.
The 175.75 drivers will NOT work with Riva Tuner.
Ok, on to what I found. There are a total of 128 stream units in the 3600M. 64 of them are disabled (units 4-7) with no hardware mask. There are a total of 6 raster units in the 3600M. 2 of them are disabled (units 5-6). It appears as though Riva Tuner is not able to re-enable them - at least not in Vista 32. I also tried XP with no luck.
Looking back at the 7900gs to 7900gtx Bios flashing, extra stream units were probably not enabled after the flash, but performance increased. This led me to compare the 8800MGTX info to the 3600M info. I also compared the 3600M to the desktop 3700.........
we got several T420 with different BIOS versions (from 1.30 to 1.40) On 95% of them the "Clear Security Chip" Option is available @ BIOS but on some of them the option is missing.
View 3 Replies View RelatedCould a few technologists in the know give me a detailed rundown on the primary differences between the three nVidia card options for the E1705/9400?
I quickly replaced my original X1400 with a dual pipe 7900GS but I am now interested in either moving up to a 7900GTX or a 7950GTX. I know I will also need to upgrade to the 130W or 150W PS as well.
I am looking for comparison information regarding memory, clockspeeds, pipeline counts, pixel/vertex units, pixel/fill rates, processing bandwidth, etc.
I am also curious about a good source for the purchase of any of these items. I have found one posting on eBay for a 7950GTX. I am interested to know if I can purchase directly from Dell, or save a few bucks by purchasing from eBay or a forum member. I also know I have read that there are equivalent Quadro (sp?) cards which will work in my machine. Are there any disadvantages to taking this route?
I know I could dig through a thousand plus posts on the topics and find all of the information I want, but I also know how much you guys thrive on expressing your technical expertise on subjects such as this ..........................
recently i bought this HP Compaq CQ61. inside BIOS there's a setting "Fan always on" and currently it sets at "On" as it keeps the fan constantly running. my question is, is it ok if i set it to "disable" hoping it will come at different temp? is it a good idea? just want to confirm. as long as i dont want to hear annoying fan noises, but the same time doesnt want to screw my motherboard?
View 7 Replies View RelatedI get the error in the Title after i tried to flash the latest BIOS update for the Z510. I can press ok and then get into the boot manager but i cant choose anything there. Also I cant boot from a Disk with e.g. XP on it.
Â
I also tried the Inside BIOS crisis mode (fn+r) with the BIOS file on my USB drive but it doesn't work and tries to access the file on the USB drive but boots normally instead to the error again. (Couldn't try it with removed battery as I have to remove the whole back to remove the battery on the Z510).
I'm trying to install XP on my machine after I fried old HD that had W7 installation. I bought new HD but i only have XP CD so i figured I'll install XP so far to get the PC up and ruining, and upgrade to W7 once i find by back-up CD.
My new HD is picked up by machine, and CD starts with installation, copying files from the CD, but only up to the point where it is supposed to start with windows installation.
At that point I get blue screen and message telling me i do not have HD or it is incorrectly installed and that I should run check disk. I've run BIOS scan, and HD is present and scans OK. Is it possible that previous install of W7 is memorized somewhere in BIOS and it is not allowing me to install XP even though HD is blank and brand new?
My Compaq Presario CQ61-110SA kept on crashing wiht the blue screen error so yesterday i had some time on my hands so i thought I would do a full system recovery in order to stop this nuisence from happening, however I wish I had read the problems associated with the HP recovery manager first as now I have no OS and a recovery manager that dosn't work.
At the moment I am using the recovry manger pre installed on the hard drive however it gets to installing the drivers, and after about an hour a pop up comes up for about half a second saying a about a driver install or dont install (it looks similair to th etype of pop up on vista when a new program wants to run) however due to it poping up so quickly and then going I cannot see what the actual driver is let alone choose an option, after this it says recovery has failed the error code c:system.savlogsBurnBootwarn.log it states the error was detected during PINIST_BBV , when i opened the log file it seemed all the drivers had succeded but [mini_FBI] resilt failed, I have tried doing the recovery with the wireless button on as I heard this could be the cause but still it didn't work, I have recovery discs that i burned however My laptop wont seem to boot fom disk even though I have changed the BIOS and put harddrive at the bottom and the disc at the top.
I have a Compaq CQ61-220SA Laptop with a 1.8 GHz Intel Celeron DualCore Mobile Processor T3000 cpu and Intel Graphics Media Accelerator 4500MHD Graphics on which I have Win 7 32 bit.
I've bought a copy of Red Alert 3 which states that it needs an Intel P4 2.6GHz cpu for Vista and 256MB Graphics with a NVidia Geforce G800 or greater chipset or an ATI Radeon X800 or greater chipset.
The shop has said as long as I don't break the seal on the game I can return it if it's not compatible with my laptop and so I need some advice please as to whether the specs I've got are sufficient to run this game?
if this laptop will run this game?
How to connect my Presario CQ61 Notebook to a Philips TV via HDMI under Windows 7. I checked the settings in the control pannel  in Windows 7 and set them to multiple displays. Under the NVIDIA control panel I cloned the displays. Nothing happens,  black screen on the TV with "no signal" message. The Notebook is recognizing the TV correctly by the way.
I already spent 2Â hours on this. Tried various articles online, but nothing seems to work. The HDMI cable is OK. I successfully connected a Playstation console to the TV. Seems it's not a hardware issue, but something with the settings of my notebook.
I've just attempted to burn my recovery discs, currently stalled after burning disc 1 of 3 with the message:
"Re-insert the disc you have just written and close the tray"
Â
Did that an hour ago. Nothing new since. Looks the same as this problem [URL]......
Â
Machine is a Presario CQ61, OS is vista home premium.
I just look at acer support and is listed that last BIOS version for my Acer (4736 ) is 2.06 (Dec 14th) and mine is 2.03 (Oct 27th). Someone has already tried this upgrade?
View 5 Replies View RelatedMy computer crashed and i had to restore it to factory settings. I then successfully connected it to the internet but now it wont.
View 3 Replies View RelatedDo not upgrade... the upgrade killed my motherboard, I dont know what happened. I as installing it fine then it was totally unresponsive and would not shut off. I then had to take away the power supply and now Dell is coming to replace my motherboard.
View 10 Replies View RelatedI had recently upgraded my RAM (laptop in sig.) from 2GB to 4GB. Now, once in a while when I boot up, a POST BIOS "Error 0232: Extended RAM failed at address line 21" error message is displayed. I can then either boot normally or enter the BIOS setup and the OS (Win 7 64-bit) is working normally and recognizes all 4GB of RAM. I dual boot with Vista 32-bit, which uses 3GB of RAM.
I did the Windows Memory diagnostic upon boot up and it didn't find any error with the memory. I searched online without any conclusive solution.
Can the Z11 bios be upgraded with the Z31 bios, if so is there any advantage?
View 3 Replies View Related