Dell :: Computer Had MAJOR Decrease In Performance, Details Inside
Feb 20, 2009
I play a video game, and my fps will go from 70-80fps, then just SPIKE to like 2fps and I will get artifacts.. I figured it was a display driver, I've tried probably 20-30 of them now (just random vista 32 bit drivers), all with the same results. When I monitor my task manager I'm using 100% of my CPU Usage, and around 1gig of ram while a game is running. I am trying to figure out 1) what the deal is and 2) how to resolve it...
Here are my specs:
Dell
Inspirion 9400
Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz 2.00GHz
2046MB RAM
Vista 32-bit Operating System
NVIDIA Geforce Go 7900 GS
Well returned my E6400 today went quite smoothly. The system was great with the exception of sending it with the wrong display a CCFL not the LED WXGA as in the outlet Details and Order Confirmation.
I been looking in the Outlet several times daily since Tuesday for a suitable placement, Tonight I scored one similar specs as the one I sent back , now I’m thinking ” see persistence and patience pays off”.
Check the specs one more time everything looks good, click checkout and confirm. Soon I browse my email Order confirmed WXGA LED click on the hyperlinked Order Number for a detailed view of components installed ……Lo and behold CCFL !!!!!!!
I immediately contacted Dell and explained the problem and cancelled my order, the agent told me to stay on the phone as she would transfer me to a sales rep who then will make sure I’ll get a LED display on a comparable spec’ed machine. 30 minutes later the sale agent answered and questioned what system listed in the Outlet would I be interested in.
I explained I was told she would work that out for me and find something similar to my past orders but with an actual LED display, she then said all she had was what was listed and further stated that one cannot go by order confirmation of what the system specs were
Studio XPS 16 Notebook Intel CoreTM i7-820QM 8GB, DDR3, 1333MHz 2 Dimm 16.0 inch Wide Screen 16:9 1080p Full HD RGBLED LCD w/2.0 MP, XPS 1645 ATI Mobility RADEON HD 4670 1GB 256GB Dell High Performance Solid State Hard Drive 2.5MM Merlot Red High Gloss Finish with Leather XPS 1645 Genuine Windows 7 Professional, 64bit, English Integrated 10/100 Network Card 8X DVD+/-RW Slot Load Drive (Dell mistake, BluRay was ordered, its enroute) Creative SoundBlaster X-Fi MB Intel WiFi Link 5300 802.11AGN Half Mini Card 9-cell Battery
Programs and Features:
Device Manager:
Disk Management:
Autoruns:
Running Processes (All 80 of them!!):
(Windows) Startup items:
Control Panel:
System Tray:
Windows Experience Index:
Startup time (From power-on to logon, no peripherals attached, power connected): 28.0 seconds
ATTO Disk Benchmark: (Transfer size 0.5 to 8192 KB, Total length: 256MB, Direct I/O enabled, Overlapped I/O, Queue Depth: 4)
I've had this laptop for over a year now, and one day when I turned it on, it doesnt respond. The big 'DELL' logo that comes up with options for bios and boot sequences doesnt appear.
The laptop does have the quickset buttons flashing from left to right, and I do hear the blu-ray drive making that familiar sound, but nothing comes up on screen.
Not even the screen's LED. The lights by the headphones and mic sockets indicate the laptop is on and the battery icon does come up but the hard drive load indicator does not.
On very rare occassions it does start running up again, I have managed to backup my files onto another computer and I also formatted the hard drive and restored factory settings from the Factory.WIM file in the D: drive. I already had the newest NVIDIA driver and the latest bios (A12) .......
So I own a studio xps 13 and after two motherboard and one ram replacements my studio still can't run right with nvidia drivers installed onto the comp. The only way for it to run right is to totally disable the GPU. I am running windows 7 64bit is anyone else having this problem?
I updated to the latest dell bios and also used the latest dell video drivers and even try out laptopvideo2go drivers and it still hangs sometimes I can't even get past the starting windows portion. I made numerous formatting attempts. My gpu is the nvidia 9500m i personally asked if they would give me the g210m and see if that would fix the problem but they have refused.
Has anyone actually fixed this problem yet? I have been using this system for around 2 months with a disable video driver but have been too lazy to call dell and wait wait and wait.
It seems like there are a bunch of people who are getting a system exchange, but have been waiting over a month to receive the system. Please post your system exchange details and any estimates given by Dell support here so we can get a better idea of how long this takes during this time of the year....
I spent a few hours working with Riva Tuner and drivers and I am now able to see all of the shader info.
If you also want to do this, download the 169.39 drivers for the Quadro 3700 Desktop model, then hack the inf file to include 061c (3700 is 061a) and install the drivers. In Riva Tuner go into the Power Users Settings and set ForceVGADeviceID to 193 (8800 gtx I think) in Vista or 401 (8600GT) in XP. This will allow you to unlock the Low Level System Settings.
The 175.75 drivers will NOT work with Riva Tuner.
Ok, on to what I found. There are a total of 128 stream units in the 3600M. 64 of them are disabled (units 4-7) with no hardware mask. There are a total of 6 raster units in the 3600M. 2 of them are disabled (units 5-6). It appears as though Riva Tuner is not able to re-enable them - at least not in Vista 32. I also tried XP with no luck.
Looking back at the 7900gs to 7900gtx Bios flashing, extra stream units were probably not enabled after the flash, but performance increased. This led me to compare the 8800MGTX info to the 3600M info. I also compared the 3600M to the desktop 3700.........
on OS X is there any way to see some details on a file by hovering your cursor over it? Ex: If I hover my mouse on a JPG on my desktop I can see the dimensions (like 1920x1200) and the filesize (like 2.3MB). Is there any way to enable this on my Macbook Pro?
Seeing as the prices have come within about $300 of eachother for these machines, I was wondering if there is a major advantage going with Alienware over Dell on the laptops with the i7 CPUs?
Could a few technologists in the know give me a detailed rundown on the primary differences between the three nVidia card options for the E1705/9400?
I quickly replaced my original X1400 with a dual pipe 7900GS but I am now interested in either moving up to a 7900GTX or a 7950GTX. I know I will also need to upgrade to the 130W or 150W PS as well.
I am looking for comparison information regarding memory, clockspeeds, pipeline counts, pixel/vertex units, pixel/fill rates, processing bandwidth, etc.
I am also curious about a good source for the purchase of any of these items. I have found one posting on eBay for a 7950GTX. I am interested to know if I can purchase directly from Dell, or save a few bucks by purchasing from eBay or a forum member. I also know I have read that there are equivalent Quadro (sp?) cards which will work in my machine. Are there any disadvantages to taking this route?
I know I could dig through a thousand plus posts on the topics and find all of the information I want, but I also know how much you guys thrive on expressing your technical expertise on subjects such as this ..........................
Between the two series, outside of say the CPU and GPU upgrades that were made, how do these stack up?
In terms of: - build quality, sturdiness - LCD quality (1080p vs 1080p) - heat - sound/quietness - on board speakers - keyboard layout (comfort, since the F looks more cramped)
I bought my 1640 refurbished and it had eveything I wanted except for Blue Ray. So to rectify this I went on a search for a Blue Ray that would fit - Dell wanted $389 for a refurb-
I found a a tear down picture and zoomed in to get the part number BC-5600S. I confirmed this with the service manual.
I found one on Ebay for $130 so I ordered it. Some of the other players out there have an eject button - the BC-5600S does not have a eject button.
Has any one done this upgrade and could offer some tips or advise?
Or am I going to be the guy that needs to do that for you?
I have a CQ61-310SV with the F.07 BIOS revision. On the BIOS downloads section here I can see the fixes for the F.15 revision. Where can I read about the changes in the versions inbetween? (F.08-F.14)
I swapped the primary bay 120GB 5400rpm that came with the DELL for a 7k200 200GB 7200RPM Hiatchi 16mb Cache Hard drive.
No bent pins, reseated twice.....
ALL DELL diagnostics pass.... but when I try to launch Hitachi's hard drive fitness tests/diagnostics it fails to load when detecting the bays.... give me an OLD DOS COMMAND.COM error.... this software with my 7k100 works perfect on Inspiron E1705.
BIOS is seeing hard drive... as 200GB... Vista sees the hard drive....
I can even do a FULL FORMAT (not quick) through Vista's advanced command prompt install and diagnostics.....
it formats successfull...
HOWEVER!.... when Vista gets to the final phase of its install when it is @ the VERY last step... I believe its called Finalizing the install.... it just sits there with the three ... and the dots are animated... so the install is not frozen, just doesn't go anywhere.
This install on my e1705 /w 7k200 and 7k100 takes like 10 minutes TOPS....
I've talked to DELL hardware and Dell Software On Call support (first 30 days free).... I've worked in IT since the early 90's and I must be missing something here.
I made a clean install of Windows 7 on my Sony VPCEB1S1E/BJ last night, mainly because the language this laptop came in was wrong and I couldn't understand anything (Home Premium, so couldn't change it either). After the install I noticed the laptop became very slow, so I reverted it using recovery discs which were supposed to reset the laptop back to factory defaults. Ok, the language went back to the original and everything was as before. But... now the laptop is very slow, especially with boot times.
I receive a lot of errors and critical errors which show up in the event lists. Event ID is usually 100, or 102-106. A few messages aboiut how some programs delayed the boot, a few about cd-rom driver delaying the boot...
I don't think this is the same screen flicker that is experienced by the few others due to auto brightness problems... Â It's flickering black and then the whole thing turns unresponsive after a while...and although the video shows it happening during a low light environment, i have had this encounter during a brightly lit area as well... Â [URL] ....
I've posted a copy of what really happens on google drive. Is this a case of motherboard problems? I jsut got my laptop about 3 weeks ago. Any chance for a 1-1 exchange?
Recently my brand new studio 17 updated, about a week later I noticed that 50GB had gone missing! I of course called tech support to see if they could help (good luck) after spending hours on the phone they could not really solve the issue, asides from doing a factory reset.
Now again I am having this issue again, once Vista updated it is slowly eating away hard drive space. There is currently 31.4GB being used (yes, this includes all hidden files) on a 450GB hard drive, yet the system reports only 402 GB free space. Each day it decreases about 2-4 GBs ......
i have had 2 problems with my Z for a while and im fed up because its out of warranty and sony will not fix it.
1. The Right hinge i believed is messed up so it does not close correctly. Due to this the right side of the lcd bezel has become cracked on the bottom right i believe because of the tension. (check the pictures). I have to keep a clip on the right bottom side to hold the LCD in place.
2. The notebook is really really hot. Especially using the nvidia. When running any 3d game it takes less than 10 minutes for the temps to get ridiculous on the cpu and gpu. It just turns off when it gets to like 103 or something. Im not sure if its the gpu or cpu but i think they share the same copper pipe for heat. Im going to put arctic silver on both of the chips if i can and clean everything out really good.
My main issue is the hinge. Im not even sure if it is repairable. If it isnt repairable where and how should I go about getting a new Hingle and LCD bezel.
I have a DELL XPSL511z. Â Why every time I try to type of this computer the mouse jumps everywhere? I have disabled the track pad and it doesn't work. Is there some way to decrease the key sensitivity? This is a HUGE problem with this model.
Not sure whether the highest resolution will be too small for my liking -- if I get the 1920x1080 screen can I decrease the resolution without any problems if it turns out I don't like the highest resolution?
my UMBP got way too damn hot. and was getting tired of the heat. So I started out just taking the bottom of the notebook case off and blowing it out. Then I started looking at it more closely, the fans have no direct access to fresh air intake. Yes I know the speakers/keyboard are meant for that. But the tinkerer in me fired up the drill press and with a 11/32 bit started making some small holes areound the fan intake and ram. Well my MBP now runs so much cooler before I was running 44-55C on mbp just idling and light web browsing. No I am so so happy to say my MBP is running at 35-40C. That is significant decrease in temps.
I have been playing with nvidia powermizer but as soon as i started scrolling down webpages, the gpu temp would increase. So i requested help and was referred to this thread: [How To] Use Rivatuner as a better "Powermizer" alternative
I followed the instructions but i was still getting mid 60's degress celcius on my gpu(i set it on low power 2d). I wasn't quite satisfied. After considerable research i found out a program called lubbo's fan control. There was a previous version released which was a fiasco. However, i noticed something. That one had a releae date of 20-jan-2010. I decided to try it and wow!! That is a keeper!!! I can select the maximum rpm of my fans, the minimum rpm. I can even go below 2000rpm (But i didnt risk it). The most interesting feature is that i can select what us the maximum temperature i want my system to be. I chose 60c and now, while i'm typing this, my gpu is reading 56c. That's the first time i'm getting a steady sub 60 temp. It isnt going less and it isnt going more than 56c. My fans rpm are at 5000 but while listening to a music or even using it without music, it isnt that disturbing. Also, it will kill your keyboard manager. Who cares and who needs it. We can control the keyboard from the bootcamp manager.
One last thing that i will add is that this software detects both gpu's (9400m + 9600m), a proof that the apple guys are being lazy to provide the gpu switching software. Tested working in w7. To make it start everytime you log on, just create a task and schedule it to run when you have logged on.
I've noticed a considerable decrease in battery life of my 2008 Macbook white after the 2009.001 security update. Earlier I used to get around 4 - 4.5 hours on normal usage, but its down by about an hour now. Its only around 9 months old, and the battery cycles is just 20.
my hp proobook 450 G1 Brightness increase by (fn+f10) & decrease by (fn+f9) suddenly stopped working from yesterday.But i can change sound to use thekey [fn+f6] and [fn+f7]also i have a problem on my left button(controler left button) . My up,down,right button is working properly but left button is working as backspace Now what can i do?
Do Vaio Z Series laptop owners use their laptop as their main primary computer or a secondary computer? Do Vaio Z series owners also have a desktop pc as their primary computer and use their Vaio Z Series as a secondary computer? Or is your Vaio Z Series laptop your one and only computer that you always use? Is it comfortable using the 13 inch screen for long periods of time?
Reason i ask is some people have more then one computer and some people just have one.
I'm just wondering if the Vaio Z Series laptop is a good choice as a main computer since it's got good specs and it's nicely portable but will the 13 inch screen be ok to use for long periods even at the higher 1600 x 900 resolution?
I have a Dell 17R 5721 Windows 8. I updated the Dell Quickset app, Digital Delivery app and the Realtek Audio Hi Def driver. Now I see that my Waves Maxx Audio 4 function is missing and F11 and F12 aren't working to increase/decrease volume. I've found several related posts, but for different computers, so they don't work for me. how to restore things back to the original factory condition?
I've just bought and installed a touchscreen into my Dell XPS M1330 ! I'm connecting it by using a usb cable, from the wlan case of my fomputer, so it's not a good solution for me. I searched the web to find an other usb connexion, inside my computer, and I wanted tu use the USB wires of the WWAN card (I don't have it). I've used a blank mini pcie card tu solder the usb cables, but I didn't succeed to make it seen by Windows. So, do you know if ther is anything to do to enable the WWAN port ?
I bought my Acer 8530G Notebook a few months ago for the start of university. I picked it so that it could function as a desktop, whilst being able to tackle new games reasonably well. At first, it was fantastic, running games on high quality with lag only rarely. But then it began to lag immensely after about one month of me owning it. Not just in the games, but on the desktop aswell and when surfing the net. Also, sound began to crackle when I played music. It only cracked a little when using the built in speakers, however when I used earphones, the crackling rendered music unlistenable.
I began to think about what may have caused the problem. I uninstalled some of the larger programs on my computer to free up hard drive space, then got rid of additional applications that ran in the background (None that came pre-installed, mind, although they were few), then did full virus scans to check for anything malignant. The scans came up clean. all clear.
Even after all this, the performance is still -poor.
So I was wondering if any of you people have suggestions on what may have happened, or if the Acer 8530G has underlying problems?
I just ordered a Latitude E6400 from the outlet but I won't be able to open it for another month. Is it ok to leave the laptop inside the box for that long?
