Acer :: 1) Synaptics Driver 2) Bios And Temperature (7720g)
Sep 20, 2009
i have the aspire 7720g (t7500, 4gb ram, 2 hard disks of 250gb etc) for2 years now....
problem number 1) i just installed windows 7 rtm home premium 32bit and the scroll control on synaptics isnt working, is there any newer driver for synaptics touchpad?
problem number 2) i noticed that from the time i updated bios to 1.45 if i work the cpu in the highest level or even in the middle!, the temperature rises from 70 degrees (on startup!) to 90-100 degrees in 1-2 minutes....i cant work anymore....
yesterday i had to upgrade from vista to windows 7 and i had the laptop directly under the aircondition with the cover open, upside down for 2 hours! the two times i tried to upgrade without doing that the laptop after the first boot (so it uses full of power) after 30-40 seconds shuts down!)
to avoid shutting down itself i did lots of things, i set the cpu speed to the lower option and i work there all the time with a lot of patience of course...........
the things i did to check if all work fine:
tried to clean the fan...ok...nothing changed, fan has no dust and working properly
changed thermal paste with artic silver 5 on cpu and graphics card...ok...nothing changed, maybe earned 10 seconds before its shutting down.... put previous
bios....ok...nothing changed i didnt undervoltaged yet the cpu because i want to see what is the fault with the machine...
View 10 Replies
ADVERTISEMENT
Oct 2, 2008
I've been trying to change the sensitivity settings for my touchpad on my Acer Aspire 5610z using the Synaptics configuration utility.
When I goto the Device Settings Tab and click on the settings button i get this error: Windows host process (rundll32) has stopped working.
The Synaptics window whites out and when I click the close button it closes but the application stays in my bottom right taskbar and I can open it again.
I've uninstalled and reinstalled the program and it isn't helping.
I tried the generic vista driver on the synaptics site. Is there somewhere else I can adjust these settings? I'm really tired of clicking on things on accident because the tap setting is so sensitive. My girlfriends inspiron 1100 is five years old and her program works fine. Is this driver program not working because the version is designed for xp?
View 10 Replies
View Related
May 19, 2009
I tried winflash to update my bios but it killed my motherboard, what did I do wrong.
I now have another 7720G with bios version 1.40.
How do I update the bios without killing my motherboard again.
Obviously I am reluctant to do it, but I would really like to have the machine running properly.
View 5 Replies
View Related
Sep 29, 2009
all of the options work on win7/7229/64 bit.
Even through there are 4 weeks until Win7 officially hits the street. No sense cutting to too close.....
View 10 Replies
View Related
Mar 22, 2010
I have driver version 15.0.9 on Synaptics which has the two finger scrolling, three finger flick/press. But I've seen pictures of people with three finger drag(such as top/bottom/left/right of screen to open anything) and pinch zoom. I've tried a few driver versions and can't find which one has both.
So the question is, which driver version has all that I mentioned?
View 10 Replies
View Related
Jul 28, 2014
i have tried to installed the apps but i cant. the hp support assistant warned me that an important action was needed and on opening to check on the action, i found out that the synaptics touchpad and the realtek local area network had failed to install. both were on the failed items sections and i then redownloaded them through the same hp support assistant. the process went on smoothly and then stopped on the installation section. both the apps are now displayed in the conpleted actions and failed actions boxes. how can i successfully install these programmes?
View 1 Replies
View Related
Oct 21, 2009
When i changed to 185.85 i noticed that the temperature of my video card lowered. Now im moving to 186.81. Do you think its a good decision, or know a better driver?
View 4 Replies
View Related
Nov 13, 2008
When reviewing this machine I found that it had a second HDD drive bay which I thought would be helpful if I ever needed extra space, that time has come. I made the mistake of buying an identical toshiba drive to put in the second bay as when I opend the second drive bay, it was totally empty, no chasis, no connector, or any sign of where I could attach a connector to the motherboard. Why promote a second drive bay if it can't be used; or can it?
View 10 Replies
View Related
Aug 12, 2009
i have a Acer 7720G laptop, if those who dont know the laptop, its not exactly that low powered so i dont think it should be suffering because its weak, its a dual core 2 duo cpu, i have 4gb ram in it and a 256mb video card.
when i am playing music generaly i will be browsing websites and as i am browsing, i find a lot when i am scrolling the music really starts stuttering a lot and then eventualy goes ok, am not sure why when i am viewing websites, and it seems like it can be any site.
i am using the newest realtek hd drivers at this time.
View 7 Replies
View Related
Aug 28, 2009
Ive got problems with fps drops to 10 fps in games like team fortress2 or counter strike source. it is not the grafics card....i think its something with the CPU. it is like stottering. i can play for 10 minutes and then it starts to drop FPS.i bought my laptop 2 months ago
View 4 Replies
View Related
Jan 3, 2008
Im using the Juan Lu bioses on my Inspiron and with 7900GS bios with a voltmod the temps were coming up to 91C (the clocks were 520/750 more or less). And then i decided to flash it with a gtx bios with a volt mod - and it works! It lets me overclock a little higher (like 580/750, but it seems that its not very stable though...) and the temps are a lot lower! 69-73C. I once saw it go up to 86C, but thats that. Also the idle temps went down from 63C to 54C. So my question is - is this real? This is a huge difference, video bios can do that? Or mayby... somethings mixed up with the sensors and theyre not giving the correct temps?
View 10 Replies
View Related
Oct 23, 2008
I have recently bought the Acer Aspire 7720g laptop and kinda like the spec. Though I have had 2 major annoying issues with it. The first is that it would never boot at first attempt after an overnight shutdown. This was resolved by installing BIOS version 1.43 after finding a solution on this forum.
The second is one that I can not for the life of me find the reason. The network connections of the laptop will stop working after a few minutes and requires several restarts to make stable. This only seems to happen to the wireless connection. It does not drop signal it just seems to disable.
Yet I have unticked the 'allow Windows to turn of the wireless device to save power' thing. Updated all drivers and BIOS to the most current found version. Also when the wireless network 'turns off' I can not get into network and sharing centre or use the 'Connect To' option, they just both hang.
Even turning the wireless off and back on with the laptop switch makes no difference.
View 10 Replies
View Related
May 9, 2010
my 7720g wireless connection drops intermittently, mostly when starting from cold, after a reboot it seems to be fine
View 7 Replies
View Related
Sep 28, 2008
When i play any game(CS 1.6, Halo, UT3 absolute any game) my fps drops to 30 and lower... Why? or maybe this is becouse i have Vista SP1, but drivers is for Vista SP0...
And i can't download newer drivers becouse downloading is not accessable...
View 9 Replies
View Related
Dec 6, 2009
Recently I had a little upgrade adventure of my Aspire 7720G, replaced the nV 8400M GS with 9600M GT 512MB, added 4GB DDR2 @ 667MHz, and then I decided to upgrade the CPU also. I was thinking about T9500 for a long time, then I came across Intel's X9000 CPU (OEM, not the ES). I installed it, BIOS recognized it, Windows also (Win 7 Ultimate x64), but then I noticed something strange. It works only at 1.2GHz, in idle and in 100% load, when it should be at 2.8GHz. I tried my luck with power schemes, I have the latest BIOS, updated drivers and no change at all. CPU-Z reports it works at 1.2GHz all the time with a multiplier x6, it should be at x14. RMClock didn't help me at all, CPUgenie also. Old CPU was T7300, it was also working at 1.2GHz with multiplier x6 in idle but in 100% load the multiplier jumped to x10 and it worked at full speed; 2GHz. Windows Experience Index with T7300 was 5.1, for X9000 is 3.9!
View 8 Replies
View Related
Oct 25, 2008
i have a Acer Aspire 7720G laptop
it has a Intel core 3 duo T5750 cpu
3gb Of ram
and oddly enough a nvidia 9300m graphics card inside
i cant remember where i seen it but is it possible to install a 2nd hdd in it?
cpu and ram i would like to increase
bois is 1.43 now after cold booting issues i had on 1.4
View 10 Replies
View Related
May 12, 2009
Having some issues with my laptop, worked fine to begin with but recently it's not be performing as smoothly as it should or as i'd expect.
Usually what happens is, i'd load a game - any game - it would run ok for ~1 min or maybe two, then the secondary fan will kick in (very loudly) and the game will jutter and FPS would drop from say 30-50 to 5-10, the sound will begin to crackle and it's just not useable.
I've so far found a way around this and its turning the Processor Speed in the empowering technology tab to "low", obviously the laptop doesnt run as fast as it would but it doesnt tend to go crazy on me whenever I try to use it for anything more than Typing.
View 10 Replies
View Related
Sep 20, 2008
I wanted to open my box to check the ease (or not) of a memory upgrade but had a helluva sweaty time trying to get the compartment cover off.
After undoing the 4 screws and getting it open a bit, it still seemed VERY firmly held in the vicinity of the fan vent area.
The plastic cover is pretty thin and I was terrified of breaking it, so tried a little prying, a bit of heaving, some levering, tugging, jabbing, swearing, praying etc. I even had the computer overturned and was looking for a way through the keyboard where I was convinced that a bolt must be holding the memory cover down.
Anyway it DID finally come loose but it was a bit scary, so I've made a couple of scans and added some notes on the lugs which were holding it in place in the hope that it might prove useful to others in the same predicament.
One scan is of the actual lid and the other is of what's inside, in case you get to feel like pushing a screwdriver in there - (don't).
View 8 Replies
View Related
May 4, 2009
In the specs listed on the website, and on the sticker on the laptop itself:
320 GB Dual HDD
(160 GBx2)
I am going insane, on the device manager it says I have two HDs, but I think one of them has been partitioned, the one with the windows data on (C drive) the HDs in my computer are displayed as this:
I've been told of a program call 'Raid' or something, but I'm really not sure what it actually does.
I just want to know if the two smaller HDs are partitioned and if possible, how to join them up again,
View 8 Replies
View Related
Feb 18, 2009
my Acer's been having trouble playing audio and keeping time. The clock problem's simple: ever since I got it it's lost time at a variable rate, averaging at probably around a minute every hour. Nothing I've done has managed to fix this, except in the short-term by updating it to Internet time.
More complicated have been the audio issues. These vary in severity and come and go to an extent, and I have had some success fixing them. Basically, since I got the computer, audio's been at least slightly choppy while playing videos over a period of time. Generally just playing audio files themselves work fine (unless something resource heavy going on in the background), and bizarrely playing videos through my browser (say on YouTube) has always been perfect, regardless of site, length or quality of video. But when it comes to playing anything from the hard drive regardless of whether it's WMP or VLC and regardless of bit rate, sooner or later the audio screws up. This can be either to the extent that it'll glitch every couple of seconds, that I'll lose sync with the video slightly, or loss of sound entirely. In fact, the first time I downloaded a video podcast on iTunes I was left wondering why the opening scene was so eerily silent for so long!
Now initially I was able to fix this by updating the BIOS to v1.45 and after that pretty much everything was good. It would still glitch occasionally on HD movies, and certainly still didn't like too much going on in the background, but generally nothing I couldn't handle. At least until now, when all the same problems have come back to haunt me worse than ever. I tried going on to v1.43, but no dice. And now I'm back on v1.45 in the vain hope that re-installing it might make some difference. But alas. I've looked at performance in task manager and it's ticking along at about 16% CPU usage, so nothing untoward there either. It seems like a BIOS problem because updating the BIOS fixed it, but now it's screwing up again under that same BIOS and with nothing untoward going on in the background or hitting the CPU too hard I'm totally stumped.
Basically, is there anything else I might try software wise, or is it time to give Acer a call while I'm still in warranty?
View 7 Replies
View Related
Jan 11, 2010
I have got an Acer 7720G laptop which comes preinstalled with vista.
I haved made a seperate partition and installed "Open Suse" (linux).
Each time I started my laptop it would give me an option from which I could choose which OS I wanted to use.
I wated to get rid of Open Suse and so I removed that partition.
But each time when I started my laptop that OS selector menu would still come.
So, I have then delted all my partitions and created new ones.
When I have installed the "Recovery - Factory Default" to bring back the laptop to its original state - it did install windows but now I cannot boot my laptop any more because it still tries to bring up the OS selector menu (but fails).
I think here might be a prob lem with the Acer "Recovery partition" which I didnt dare to touch.
View 5 Replies
View Related
Mar 4, 2015
I got this Aspire 5560G about three years ago and it was running Windows 7. I recently upgraded to Windows 8.1 and have managed to find and install all the drivers I need for my lapop to run smoothly, except for the touchpad.
Â
Although it works for moving the cursor and double-tapping to open files etc, it doesn't work to scroll pages. I have tried downloading the latest driver on the Acer Drivers page but it doesn't change any features.
View 2 Replies
View Related
Dec 8, 2008
Just bought one of these ACER ASPIRE 7720G laptop's from ebay afew days back. It comes with the Nvidia Geforce 8400M GS, but i'm wondering if it's possible to upgrade this card with something that packs more of a punch.
If it is possible, what would be the ideal card for this setup?
The processor is the Intel® C2D T7300 Processor, 2 gb ram, 250gh hd space.
View 10 Replies
View Related
Jul 3, 2009
I should like to upgrade myIntel 3945 ABG WiFi Card To an Intel 4965AGN card.
a) Is this possible
b) Is the card easy to get to
c)Is it simply a case of unplugging the old card and plugging in the new card, followed by running the drivers.
I have two 160GB HDD's inside,
View 6 Replies
View Related
Jan 14, 2009
I have recently acquired an Acer 7220G notebook. Every morning when I switch it on it freezes on the acer splashscreen. I then reboot and it will always load up on the second go.
I have tried switching it off during the day and on again but is always ok. The problem only occurs when the power has been off for a number of hours. It is getting incredibly frustrating have to startup twice each morning.
View 4 Replies
View Related
Jan 18, 2010
Over-clocking with RivaTuner. Right now I'm at 500Mhz for core, 1Ghz for shader and 425MHz for RAM.
On idle graphics card is at about 63C and processor at 33C with fan off.
To put some load on system, I used Intel BurnIn standard test and two instances of 64bit version of fluidsGL.exe from nVidia's Cuda SDK (acording to GPU-Z, the load on graphics card is about 93%). Mandelbrot.exe does put some more load on graphics card, but it closes as soon s application looses focus, so it isn't as convenient.
When I run tests, temperatures are around 85C for graphics card and 65C for processor.
I wanted to ask you how much should I overclock the graphics card and what are safe temperatures? I plan to use this laptop for few more years, so I do not wan to cook my graphics card.
View 4 Replies
View Related
Oct 21, 2008
I bought an ACER Aspire 7720G Intel Core 2 Duo with Vista SP1 3 weeks ago and have now some problems with my WLan and with booting after sleep. WLan only works when I restart the computer after swiching on the WLan connection either by pressing the WLan button or by activating the connection in "networks and sharing center" (at least it works then, but it's annoying to restart the computer all the time). Since I use WLan at home I get a message while booting the system (Broadcom UNDI PXE.... Client... MAC ADDR:... GUID... DHCP ...not found..blabla). I use a Lan connection at work and here I have no problems yet. My second problem is that my computer really stays asleep after I woke it up from sleep or just if I would not use it some minutes. It does not show any system related information anymore and I can only restart it again. I have looked up my BIOS and it is Version 1.44 (read the thread about the BIOS problems),
View 4 Replies
View Related
Nov 28, 2014
i'm having problems with my new acer v5 touchpad... i made a clean install of windows 8.1 and installed all the win 8.1 drivers from the acer support site. from the device id of my touchpad (ACPISYN1B71) i assumed that it is a synaptics model.
Â
the problem now: after installing several versions of the driver, even trying the alps and elantech versions, i could never manage to get multi-gesture settings in the settings windows from synaptics - there are only settings visible for right- and left-click. where are the multi-touch gesture options for windows 8?
Â
basic funtions work, like left click, two-finger right click and two-finger scrolling, but nothing is configurable and all the other gestures are not available.
View 3 Replies
View Related
Nov 16, 2009
i have a acer laptop that did have vista on, i have upgraded this recently to windows 7, i have just today bought a new webcam which it says is windows 7 ready plus there are no drivers needed, i can just plug it in and it will work.
sounds nice and easy =]
well, i have plugged it in and it seems to be installing, finds the driver etc, then it says cannot install, then when i go into the device manager and click into the device it sayd access denied, i have tried alsorts to fix it, turned uac off etc and still does same thing, tried in safe mode, i just cannot do it.
View 10 Replies
View Related
Mar 6, 2010
I picked up a 9600m GT on ebay and need help removing the bottom cover. The full bottom panel needs to be removed as it is trapping the copper pipes from the heatsink. Can anyone direct me to a guide on how this is done on a 7720g?
View 6 Replies
View Related
