I have recently acquired an Acer 7220G notebook. Every morning when I switch it on it freezes on the acer splashscreen. I then reboot and it will always load up on the second go.
I have tried switching it off during the day and on again but is always ok. The problem only occurs when the power has been off for a number of hours. It is getting incredibly frustrating have to startup twice each morning.
I have a Dell Latitude E6500 that I have been using for quite a long time. Recently it started acting up, and now it won't start up past the Dell logo. It simply goes to a black screen with a flashing dash. I've restarted it a few times, tried pushing F8, and gone into F12. I tried the Diagnostics through F12, but it takes an extremely long time and has never finished so far. I tried it again this morning, and periodically throughout the test a message like this has shown up:
Error Code 0123. Msg: Error Code 2000-0123 Msg: Memory - integrity test failed. The given error code and message can be used by Dell Technical Support to diagnose problem. Do you want to continue testing?
Yes or No or Retry
I'm not sure what exactly this means, but it keeps popping up. I would like to get through to start up my computer all the way, but that doesn't seem to be an option. Is there anyway for me to wipe it without F8? My cd slot won't open, and I don't have disks anyways. Is it possible to fix it via USB drives? Or F12?
I have a HP Windows 8.1 laptop that now started to freeze at start up. It freezes when it gets to the waiting screen and i don't know what I should do... I have important files I can't afford to loose.
View 4 Replies View RelatedI have an Acer 8930G, it's knocking on some years (approx 7ish) and this is the first problem I have had with it. When i turn it on, the normal Acer screen shows up and then where it would normally load to windows it just blacks out. There is still power as the all the lights are still working and there is a white-ish light which looks inside the base of the screen. I have looked around on the web and have tried the flashlight on the screen and also removing battery / power cable and holding down the power button for a minute and rebuilding and trying again, but to no avail. I am able to get onto the BIOS screen, and it did look like the boot device in position 1 was the BD drive, I moved this back to the hard drive but still the same....
View 9 Replies View RelatedSystem specs:
Lenovo T430U
Intel i5-3427U
8GB PC3-12800 DDR3-1600MHz SoDIMM Memory
HDD 500G 7200rpm Toshiba
mSATA 24GB Samsung Cache
Win 8 Pro, upgraded to 8.1
I rarely use this machine but a couple of months ago I went to boot it up and found that I was not able to get past the Windows splash screen. Sometimes I don't even get the Windows splash screen, I just get a black screen. Rarely I get a Windows screen saying that it is diagnosing a system problem or something to that effect and I can even get to where it will allow me to do some Windows diagnostics but nothing ever comes of it and the process is extremely slow.
I called Lenovo, but of course my machine is out of waranty so the tech just gave me a few pointers and said I could send it in to the depo but the potential repair cost could range up to about 75% of what I paid for the machine in the first place. Anyways, after having me try a few things in the BIOS he suggested that it was likely the hard drive. I mistakenly thought from the time that I bought this machine that the OS was installed on the 24 GB SSD so I ordered a new SSD and swapped it in. This made no difference at all as I have now learned that the mSATA SSD drive is merely for cache to speed up booting.
I am afraid that this means the main HDD is at fault, and quite frankly, if I replace it I am going to do a fresh install of Windows 7. But I do have pictures and docs that I would like to salvage if possible.
My laptop froze and I was unable to do anything so I forced shutdown on it, I rebooted it and I noticed I was on the boot screen for a long period of time (about 10 min).
I ran the System Quick test in the UEFI BIOS and everything passed except
"Hard Drive Short DST Check: FAILED".
FAILURE ID: 6CQ8HW-6K1788-MFPX0K-60QG03
PRODUCT ID: C2N47UA#ABA
Ive got a two year old latitude D630 that is shutting down right after the Dell splash screen. pressing down on the left side of the laptop while its booting up and that worked to the point where I got to the login screen, but after a few seconds, it just shut down again.
View 5 Replies View RelatedI bought a new X1 Carbon (20A7) a week ago and from time to time the laptop gets stuck on the ThinkPad splash screen when booting. I have to hold the power button to turn it off and then it boots fine. My brother has this problem with T540p, although this happens to him a LOT more often (also, if he waits patiently for 10-20 minutes, the system boots eventually, I havent tried that on my X1).
It doesn't matter if the AC is connected, whether there is something connected to USB ports, whether it was a restart or just normal boot, there is no pattern that I can see, this seems random. We tried updating the BIOS to the newest version, our USB ports are not bent or anything, the SSD with the OS is set as the first boot device. This still happens. I see there are more people with thinkpads who have the similar problem, but their solutions do not apply (if there were any).
Studio XPS 1647 laptop can't boot past POST and stuck at Dell splash screen with progress bar at ~80%. After holding down FN and pressing the power button, all three volume LEDS would flash twice, immediately followed by the volume UP and DOWN keys flashing, and then followed by just the Volume Down LED flashing.
Recently my Studio XPS 1647 has had overheat problems, and sometimes they would cause BSOD with broken screen images. The BSOD always came with bcode 116 error: this is apparently video card related. So last weekend I opened the case, removed the heat sink and the fan. The heat sink vent was completely blocked with a thick layer of dirt, so it's no wonder for overheating. I cleaned up the heatsink vent and the fan, cleaned up the top of CPU chip and the top of GPU chip, reapplied thermal paste and put everything back together. After that, the machine couldn't pass the Dell splash screen on boot. I've already checked the discussions here and followed suggestions on holding down the power button to remove static, reseating the memory card etc., but they are of no use.
Finally I followed the instructions on starting up ePSA. I've tried it repeatedly, and every time the boot always stuck at the Dell splash screen with the progress bar at about 80% with or without applying ePSA. The SPA screen never came up if I held down FN+Power button. The difference between a generic boot and a PSA boot is that if I held down FN+Power button, all three volume LEDS would flash twice, immediately followed by the volume UP and DOWN keys flashing, and then followed by just the Volume Down LED flashing.
I've read from a few discussions talking about all three volume LEDS flashing would be a motherboard problem. But in my case it's three LEDs flashing twice, followed by volume UP and DOWN keys flashing once, and then followed by just the Volume Down LED flashing continuously. What this PSA blinking code means?
Today I was using my laptop (Acer Aspire 5742G) normally and then suddenly my screen freezes and turns off. The picture at that moment when the screen froze was covered with green horizontal lines and some small green squares and then the screen switched off while the laptop continued to operate normally.
I tried to restart my laptop, but the screen does not turn on, and looks like laptop is working normally because I can hear the windows login sound (led indicators for WIFI and read data from the HDD are working). I tried to connect the laptop and TV via an HDMI cable, but the TV does not get any picture.
Got windows 7 on my g555, with truecrypt on the drive, if it matters. Last night, closed down the cover of my laptop before i fell asleep, like always, today it doesn't respond at all when I opened it back up. Forced it to shut down, and haven't seen anything but a black screen since.
The power light comes on, the fan comes on, and that's about it. Can't get to the bios, can't do ANYTHING. Tried unplugging it for a while, pressing power 10 times, holding power down for a minute, ran the battery entirely dry THEN discharged the caps, ...I've read many solutions where its the built up static charge that's the problem, but not here. I've tried all versions of the solution I could find, all very similar, but none worked. I took out my RAM and put it back in, and same for the hard drive. No dice.
The only lights I get at all are the power light, and the battery charging light next to it. Can't get the CAPS LOCK, num lock, any of that to do anything. Cannot boot by CD/DVD as I cannot change the bios, and can't get any response from any keys or key combos that I can think of (including the one-touch restore).
when I try to install the Windows 8 copy I got with my Lenovo S440 in a virtual box environment
the installation procedure hangs on the windows splash screen. I never saw a Windows 8 installation
procedure before, so I booted my laptop from the installation media to check if it is corrupted.
This works fine. A loading dot circle is displayed under the logo after a few seconds and than after quiet
a while the lenovo wizard is shown... so it has to be an issue with the virtual box.
I attached a screenshot to show you where it hangs.
My acer aspire 6930 would crash and then have problems starting up sometimes the blue screen would show up and sometimes i would see lines on my screen and it freezes and also sometimes it just fades away. When i try to restart it the computer wont boot but all the lights are on.
View 1 Replies View RelatedI have an Acer Aspire 7740-5691. The boot screen freezes with pixel distortion at the top. I've tried all the restore discs. I found where some people referenced a similar problem with other computers and they were fixed by resetting the bios. I can't figure out how to do that. There's no place for that in the boot settings option and there's no visible coin battery to temporarily remove to reset.
View 2 Replies View RelatedI'm running i7 inspiron with windows 7 64 bit.
When i start computer on battery and then connect external power it freezes.
I can't click anything.
I have all the drivers installed.
When reviewing this machine I found that it had a second HDD drive bay which I thought would be helpful if I ever needed extra space, that time has come. I made the mistake of buying an identical toshiba drive to put in the second bay as when I opend the second drive bay, it was totally empty, no chasis, no connector, or any sign of where I could attach a connector to the motherboard. Why promote a second drive bay if it can't be used; or can it?
View 10 Replies View Relatedi have a Acer 7720G laptop, if those who dont know the laptop, its not exactly that low powered so i dont think it should be suffering because its weak, its a dual core 2 duo cpu, i have 4gb ram in it and a 256mb video card.
when i am playing music generaly i will be browsing websites and as i am browsing, i find a lot when i am scrolling the music really starts stuttering a lot and then eventualy goes ok, am not sure why when i am viewing websites, and it seems like it can be any site.
i am using the newest realtek hd drivers at this time.
Ive got problems with fps drops to 10 fps in games like team fortress2 or counter strike source. it is not the grafics card....i think its something with the CPU. it is like stottering. i can play for 10 minutes and then it starts to drop FPS.i bought my laptop 2 months ago
View 4 Replies View RelatedI have recently bought the Acer Aspire 7720g laptop and kinda like the spec. Though I have had 2 major annoying issues with it. The first is that it would never boot at first attempt after an overnight shutdown. This was resolved by installing BIOS version 1.43 after finding a solution on this forum.
The second is one that I can not for the life of me find the reason. The network connections of the laptop will stop working after a few minutes and requires several restarts to make stable. This only seems to happen to the wireless connection. It does not drop signal it just seems to disable.
Yet I have unticked the 'allow Windows to turn of the wireless device to save power' thing. Updated all drivers and BIOS to the most current found version. Also when the wireless network 'turns off' I can not get into network and sharing centre or use the 'Connect To' option, they just both hang.
Even turning the wireless off and back on with the laptop switch makes no difference.
my 7720g wireless connection drops intermittently, mostly when starting from cold, after a reboot it seems to be fine
View 7 Replies View RelatedWhen i play any game(CS 1.6, Halo, UT3 absolute any game) my fps drops to 30 and lower... Why? or maybe this is becouse i have Vista SP1, but drivers is for Vista SP0...
And i can't download newer drivers becouse downloading is not accessable...
Recently I had a little upgrade adventure of my Aspire 7720G, replaced the nV 8400M GS with 9600M GT 512MB, added 4GB DDR2 @ 667MHz, and then I decided to upgrade the CPU also. I was thinking about T9500 for a long time, then I came across Intel's X9000 CPU (OEM, not the ES). I installed it, BIOS recognized it, Windows also (Win 7 Ultimate x64), but then I noticed something strange. It works only at 1.2GHz, in idle and in 100% load, when it should be at 2.8GHz. I tried my luck with power schemes, I have the latest BIOS, updated drivers and no change at all. CPU-Z reports it works at 1.2GHz all the time with a multiplier x6, it should be at x14. RMClock didn't help me at all, CPUgenie also. Old CPU was T7300, it was also working at 1.2GHz with multiplier x6 in idle but in 100% load the multiplier jumped to x10 and it worked at full speed; 2GHz. Windows Experience Index with T7300 was 5.1, for X9000 is 3.9!
View 8 Replies View Relatedi have a Acer Aspire 7720G laptop
it has a Intel core 3 duo T5750 cpu
3gb Of ram
and oddly enough a nvidia 9300m graphics card inside
i cant remember where i seen it but is it possible to install a 2nd hdd in it?
cpu and ram i would like to increase
bois is 1.43 now after cold booting issues i had on 1.4
Having some issues with my laptop, worked fine to begin with but recently it's not be performing as smoothly as it should or as i'd expect.
Usually what happens is, i'd load a game - any game - it would run ok for ~1 min or maybe two, then the secondary fan will kick in (very loudly) and the game will jutter and FPS would drop from say 30-50 to 5-10, the sound will begin to crackle and it's just not useable.
I've so far found a way around this and its turning the Processor Speed in the empowering technology tab to "low", obviously the laptop doesnt run as fast as it would but it doesnt tend to go crazy on me whenever I try to use it for anything more than Typing.
I wanted to open my box to check the ease (or not) of a memory upgrade but had a helluva sweaty time trying to get the compartment cover off.
After undoing the 4 screws and getting it open a bit, it still seemed VERY firmly held in the vicinity of the fan vent area.
The plastic cover is pretty thin and I was terrified of breaking it, so tried a little prying, a bit of heaving, some levering, tugging, jabbing, swearing, praying etc. I even had the computer overturned and was looking for a way through the keyboard where I was convinced that a bolt must be holding the memory cover down.
Anyway it DID finally come loose but it was a bit scary, so I've made a couple of scans and added some notes on the lugs which were holding it in place in the hope that it might prove useful to others in the same predicament.
One scan is of the actual lid and the other is of what's inside, in case you get to feel like pushing a screwdriver in there - (don't).
In the specs listed on the website, and on the sticker on the laptop itself:
320 GB Dual HDD
(160 GBx2)
I am going insane, on the device manager it says I have two HDs, but I think one of them has been partitioned, the one with the windows data on (C drive) the HDs in my computer are displayed as this:
I've been told of a program call 'Raid' or something, but I'm really not sure what it actually does.
I just want to know if the two smaller HDs are partitioned and if possible, how to join them up again,
my Acer's been having trouble playing audio and keeping time. The clock problem's simple: ever since I got it it's lost time at a variable rate, averaging at probably around a minute every hour. Nothing I've done has managed to fix this, except in the short-term by updating it to Internet time.
More complicated have been the audio issues. These vary in severity and come and go to an extent, and I have had some success fixing them. Basically, since I got the computer, audio's been at least slightly choppy while playing videos over a period of time. Generally just playing audio files themselves work fine (unless something resource heavy going on in the background), and bizarrely playing videos through my browser (say on YouTube) has always been perfect, regardless of site, length or quality of video. But when it comes to playing anything from the hard drive regardless of whether it's WMP or VLC and regardless of bit rate, sooner or later the audio screws up. This can be either to the extent that it'll glitch every couple of seconds, that I'll lose sync with the video slightly, or loss of sound entirely. In fact, the first time I downloaded a video podcast on iTunes I was left wondering why the opening scene was so eerily silent for so long!
Now initially I was able to fix this by updating the BIOS to v1.45 and after that pretty much everything was good. It would still glitch occasionally on HD movies, and certainly still didn't like too much going on in the background, but generally nothing I couldn't handle. At least until now, when all the same problems have come back to haunt me worse than ever. I tried going on to v1.43, but no dice. And now I'm back on v1.45 in the vain hope that re-installing it might make some difference. But alas. I've looked at performance in task manager and it's ticking along at about 16% CPU usage, so nothing untoward there either. It seems like a BIOS problem because updating the BIOS fixed it, but now it's screwing up again under that same BIOS and with nothing untoward going on in the background or hitting the CPU too hard I'm totally stumped.
Basically, is there anything else I might try software wise, or is it time to give Acer a call while I'm still in warranty?
I have got an Acer 7720G laptop which comes preinstalled with vista.
I haved made a seperate partition and installed "Open Suse" (linux).
Each time I started my laptop it would give me an option from which I could choose which OS I wanted to use.
I wated to get rid of Open Suse and so I removed that partition.
But each time when I started my laptop that OS selector menu would still come.
So, I have then delted all my partitions and created new ones.
When I have installed the "Recovery - Factory Default" to bring back the laptop to its original state - it did install windows but now I cannot boot my laptop any more because it still tries to bring up the OS selector menu (but fails).
I think here might be a prob lem with the Acer "Recovery partition" which I didnt dare to touch.
I tried winflash to update my bios but it killed my motherboard, what did I do wrong.
I now have another 7720G with bios version 1.40.
How do I update the bios without killing my motherboard again.
Obviously I am reluctant to do it, but I would really like to have the machine running properly.
I watched a movie on Thursday evening and closed the lid of my acer aspire E531 laptop. (Chosen shut down method) I wanted to resume working about 2 hours later and was greeted by only a grey screen. Machine powers up but then just the blank screen. After switching on, the fan starts for about 30 seconds and then stops and then the blank (grey like screen)
I've tried some solutions posted on internet ( remove battery and hold power button; press ctr alt del twice; press F8 on start up) Nothing worked. The remove battery solution ignited some response from the machine, i.e. grey screen seemed to turn white with feint blocks in background almost checkered blocks, but very very feint.